Spiralinių kūginių krumpliaračių pjovimo staklės

KLINGELNBERG C 28 P

Būklė: geras (naudotas), Gamybos metai: 2002, Wheel diameter - max. 275 mm Wheel width 55 mm Module - max. 6 Module - min. 1 Control system 840 C Siemens Cedpfx Afstumrpo Aorb Total power requirement 100 kW Machine weight approx. 16.7 t Space requirement approx. 5.2 x 2.3 x 2.4 m

Būklė: naudotas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Codpfx Afstycg Se Aorb Module – min. 0.5 Stroke length max. 0 – 52 mm Internal spindle taper MK 4 Table diameter 160 mm Table bore diameter 75 mm Stroke rate 355 – 630 strokes/min Feed range 0.008 – 0.4 mm/stroke Required space approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg With rack cutting attachment Change gear set Year of manufacture: approx. 1981

Gamybos metai: 2002, būklė: naudotas, Maximum wheel diameter: 275 mm Wheel width: 55 mm Module - max.: 6 Module - min.: 1.5 Control system: Sinumerik 840C Tooth width: 5.5 mm Spiral angle: 0/60° Number of teeth - max.: 120 Number of teeth - min.: 5 Transmission ratio max.: 1:10 Crsdjgtvbpspfx Af Aob Transmission ratio min.: 1:1 Workpiece spindle speed max.: 110 mm Cutter head speeds: 20–110 rpm Total connected load: 100 kW Machine weight approx.: 16,700 kg Space requirement approx.: 5,200 x 2,300 x 2,400 mm

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t Cjdpfjt Hww Dox Af Ajrb LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Gamybos metai: 1994, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of Manufacture: completely overhauled by the manufacturer in 1994 Weight: 3,700 kg Pulling Force: 10,000 kg (100 kN) Maximum Stroke: 1,500 mm Maximum Workpiece Diameter: Ø 500 mm Broaching Speeds: infinitely variable from 1 m/min to 6 m/min Return Speed: infinitely variable up to 20 m/min Codpjgyd T Ejfx Af Aerb Power Supply: 400V / 50Hz

Gamybos metai: 1971, būklė: naudotas, Technical Details: Wheel diameter – max.: 300 mm Module – max.: 5 Module – min.: 0.5 Max. workpiece weight: 60 kg Approx. machine weight: 4.0 t Machine dimensions: 1800 x 1850 x 2500 mm Switch cabinet dimensions: No. 1: 1930 x 400 x 1920 mm Switch cabinet dimensions: No. 2: 800 x 230 x 1950 mm Exhaust unit dimensions: 1400 x 700 x 560 mm Cooling unit dimensions (LxWxH): 1.2 x 1.0 x 0.45 m Electronically controlled gear flank grinding machine For modules up to 5 and diameters from 240–300 mm Feed rate per workpiece revolution stepless: 0.4 – 3.2 mm Max./min. number of teeth: 130 / 12 Max./min. pressure angle: 30° / 14°30` Max./min. helix lead at 24 teeth: 6000 / 200 mm Max. helix angle, both sides: 45° Grinding worm speed: 1900 rpm Without dressing device Equipment: Approx. 77 various change gears, extension tubes, and miscellaneous accessories Two of these machines are available for sale. Both machines are operated via two shared control cabinets and a common exhaust system. Codsvc Apbspfx Af Ajrb

Būklė: geras (naudotas), Gamybos metai: 1998, Max. pitch circle diameter external gearing: 300 mm Max. pitch circle diameter internal gearing: 300 mm Max. external diameter of workpiece (equipment): 450 mm Module - max.: 6 Maximum gear width: 100 mm Max. helix angle (with tool Ø 125 mm): +/- 45° Stroke rate - stepless: 130 - 1300 strokes/min Workpiece weight: 1000 kg Minimum distance table surface - tool spindle: -55 / +300 mm Maximum distance table surface - tool spindle: 200 mm Maximum distance table surface - tool spindle: 350 mm Manual column lateral shift: +/- 25 mm Manual swiveling angle of tool spindle: +/- 0.5° Max. tool speed: 15 rpm Max. workpiece speed: 27 rpm Max. tool diameter: 7 inches Voltage: 400 V Frequency: 50 Hz Max. current: 70 A Total power consumption: 48 kW Machine weight approx.: 11 t Space requirement approx.: 4.27 x 3.11 x 2.87 m Csdpjvu E Nujfx Af Aorb Table bore: 40 mm Main spindle taper: SK 45 Control: Siemens Sinumerik 840 C Gear shaping machine Gleason PFAUTER Model PSA 300 The CNC modular gear shaping machine with gear cutter is designed for machining external and internal cylindrical gears, with straight or helical evolvent gearing, as well as any other profiles achievable by generating or indexing shaping processes. The work cycle is controlled by a CNC unit with dedicated software for gear machining. Field of application --> The PSA 300 was designed for manufacturing: - Gears with straight external toothing - Gears with straight internal toothing - Gears with external helical toothing - Gears with internal helical toothing

Būklė: naujas, Eifco gear hobbing machines product range Codpfsu Egdlex Af Aorb

Būklė: geras (naudotas), Wheel diameter - max. 1600 mm Wheel width 250 mm Module - max. 30 Module - min. 8 Tooth height 58 mm Tooth width 250 mm Machine weight approx. 42.3 t Space required approx. 4.45 x 6.00 m - Cone distance in mm for spiral angle 30° minimum: 150 maximum: 800 - Cone angle, in degrees minimum: 5 maximum: 85 Crsdju Dbucjpfx Af Aeb - Tooth angle minimum: 0° maximum: 45° - Number of teeth to be cut minimum: 10 maximum: 150 The machine is complete, fully functional and in good condition. Equipment / Accessories: - complete set of change gears - 4 pcs. cutter heads - various milling cutters - Operating manual in English

Būklė: geras (naudotas), Gamybos metai: 2000, krumpliaračio skersmuo: 449 mm, Ausgestattet mit: Fanuc 150MB CNC-Steuerung Trockenschneiden Schneidwerkzeug-Abdeckung Späneabsauganlage Automatische Türen Hydraulikanlage Zentralschmierung Arbeitsleuchte Signalampel Technische Daten: Größtes Übersetzungsverhältnis: 10:01 Arbeitsbereich (kontinuierlich): Maximale Zahntiefe: 15,24 mm Maximale Zahnbreite: 50,8 mm Arbeitsbereich Achsen: X-Achse (horizontal): -114 bis 178 mm Y-Achse (vertikal): -178 bis 190 mm Z-Achse (Schlitten-Grundplatte): -10,16 bis 500 mm Schwenkbereich Werkstückspindel (B-Achse): -3 bis 90° Maximaler Abstand Maschinenspindelmitte zur Spindelseite: 165 mm Anzahl Zähne: 5 - 200 (inklusive) Max. Teilkreisdurchmesser (Modul) bei typischem 35° Spiralwinkelgetriebe mit Max. Fräserdurchmesser 12" bei folgenden Übersetzungen: Crjdjruakgepfx Af Aob Formfräsen 1 x 1 – 13,5" – 342,9 mm 2 x 1 – 16,0" – 406,4 mm 5 x 1 – 17,7" – 450,0 mm Wälzfräsen (210 mm Fräserdurchmesser) 1 x 1 – 10,560" – 268,22 mm 2 x 1 – 10,286" – 275,00 mm 5 x 1 – 11,810" – 300,00 mm Fräskopf-Durchmesser: Helixact: 100, 125, 169, 200, 250, 320 mm Kontinuierliches Tauchverfahren, Tetrachlorethylen: 102 – 210 mm Werkstückspindel: Bohren großer Durchmesser: 5 3/64" Konische Steigung auf 304,8 mm (1 Fuß): 21/32" Kegeltiefe: 5,29" Durchmesser komplette Spindelbohrung: 3,35" Geschwindigkeiten: B-Achse, Werkstückspindel-Schwenkachse: 30° A-Achse, Werkstückspindel U/min: 0 – 83 min⁻¹ X-Achse horizontal: 80 mm/s Y-Achse vertikal: 80 mm/s Z-Achse Schlitten-Grundplatte: 80 mm/s Stellfläche (L x B x H, ca.): 4,75 x 3,40 x 2,54 m / 188" x 134" x 100" Maschinengewicht (ca.): 10.980 kg / 24.156 lbs