Pripildymo Linija pirkti naudotą (3 364)

Būklė: naudotas, mašinos/transporto priemonės numeris: 005989, Maks. apdorojamas ilgis: 1500 mm Dcjdowucl Sopfx Af Aog Sukamoji platforma: Ne

Gamybos metai: 2013, būklė: naudotas, Technical data for the bale opener line for RDF, MSW, paper, cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Model: BO 4000 Year of manufacture: 2015 Number of bales opened: 674 units Operating time: only 3 days, exclusively during commissioning of the entire plant upon initial installation Opening time: approx. 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400–1900 mm Max. bale weight: 2,000 kg Conveying height (system): 1,400 mm Max. conveyor width (system): 1,200 mm Materials to be opened: RDF/MSW System availability: 98% Noise level of bale opener line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Operator display: SIEMENS SIMATIC HMI Touch Control system: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: - Feeding conveyor: 3,500 x 1,200 x 1,400 mm - Infeed conveyor to opener: 1,500 x 1,200 x 1,400 mm - Bale opener (gripper with knife) Special equipment: - Oil heater in hydraulic oil tank - Control cabinet heating - Oil cooler for hydraulic unit Explanation regarding the short operating period: The complete Cross Wrap bale opener line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The background for installation was that, in the event of operational disruptions or maintenance of the incineration plant, municipal waste could continue to be accepted, compacted, wrapped, and stored until the disruption was resolved. Then, all the bales would be reopened and the waste would be fed back into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and never used in regular operation afterwards. Only during commissioning and initial testing were 674 bales opened over three days in 2015. The system is in excellent, immediately operational condition. Due to modifications at the incineration plant, the installation area for the bale opener was needed, so the entire line is now available for sale. Dedpfx Afeu Tg I Dj Ascg Brief description of the bale opening process: Pressed bales are placed on the infeed conveyor from the side or rear using a forklift. For opening, the bales must be oriented so that the wire or twine binding runs horizontally to the conveyor; otherwise, the bales must be rotated 90° beforehand. The opening conveyor moves one bale at a time in front of the cutting unit. The grippers secure the wires or twine. The rotating knife cuts the bale lengthwise. Afterwards, the gripper returns to the home position. The opened bale is then conveyed to the discharge chute and falls onto the subsequent conveying system. Remarks: Original price of the entire plant: €296,000. Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available. The system has been dismantled into transportable units, stored, and is available at short notice for inspection and loading. No liability is assumed for the technical specifications or possible errors.

Gamybos metai: 2004, būklė: naudotas, Hardcover Book Production Line Kolbus BF 527 Year of manufacture: 2004 - Automatic adjustment - Co-Pilot with touchscreen - Product counter - Book measuring table - Star feeder - Preheating unit (hot air) - Rounding and backing station - Gluing unit - Without gauze station - Bookmark suction device - Gluing unit - Head and tail banding & backlining station - Pressing station - Casing-in station - Case pre-stack belt - Case bending station - Case forming station - Cold glue back lining pump Joint forming and pressing machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic adjustment Dcedpfx Afex Dkk Ss Ajg - Feed-in from the right - Integrated hydraulics - Heating control unit - Straight delivery Book stacker Kolbus DS 391 - Compensating book stacker - Straight delivery

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 36 700 mm, bendras plotis: 2 300 mm, bendras aukštis: 3 300 mm, darbinio aukščio: 520 mm, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Lisec IG line 4000 x 2500 mm (2001/2007), left/right, suitable for triple-glazed units, models according to Lisec model catalogue and 4-sided stepped units: - RTVN-32/25WE, washing machine infeed (3.2 m length), year 2007 (!) - RTL-25VN, washing machine with 6 brushes for Low-E, including 1 hot water tank, 1 sand filter, and 1 blower, year 2007 (!) - RTVN-16/25ST, washing machine outfeed (1.6 m length), year 2007 (!) – RSVN-38/25A, frame assembly station, year 2001 – RTVN-15/25MZ, measuring station for gas filling press, year 2001 Dcodoy Ivb Hepfx Af Aeg – RTVN-11/25ST, infeed conveyor for gas filling press (or extension for measuring station), year 2001 – FPS-36/25U2T, argon gas filling press, year 2001 – RTVN-16/25ST, outfeed 1 of the gas filling press, year 2001 – RTVN-16/25ST, outfeed 2 of the gas filling press, year 2001 – APKV-25/2, 2-lane cork applicator, year 2001 – RTVN-15/25VFE, infeed with glass and frame measuring device as well as barcode reader for shape closure, year 2001 – VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), 4-sided stepped units (bottom 0–50 mm, front, back and top 0–140 mm) as well as special shapes according to Lisec special shape catalogue, Beckhoff PC, Lenze servo motors and controllers, year 2001 – DOS-1PUD + SID, material dosing for PU (base 2 x 200 litres, liquid hardener 200 litres) and SI (base 200 litres, hardener 20 litres), year 2001 All machines were fully operational until dismantling and are now available from stock in Hofkirchen/Austria and from stock in Oroshaza/Hungary.

Būklė: geras (naudotas), Gamybos metai: 1992, fully automatic programmable cross-cutting with additional marking detection for defect removal via LUT system Dcsdpfxjl H E Taj Af Aeg infeed conveyor 6 m 6 ejection stations, total length 12 m The infeed belt is currently not running, most likely due to a frequency converter issue

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, paskutinio kapitalinio remonto metai: 2023, For sale: a complete and fully operational steel sheet roll forming line for processing coils (e.g., Magnelis) into various profiles such as C-type, commonly used in photovoltaic installations and solar farms, steel hall and shelter construction, as well as furniture manufacturing, etc. Dsdou A U Utjpfx Af Aocg The line, including the decoiler, is installed in a heated hall under near-laboratory conditions. Buyers can test run the machine before purchase. I have contacts for companies supplying custom roll forming toolsets for specific profiles, as well as for companies specializing in upgrading and expanding such machines. Further information is available exclusively by phone; I do not respond to written messages. A VAT invoice will be issued for the production line. --- Located in Poland, near the border with Ukraine (Krosno city).

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, kampinė presė Dsdsyxy Tnepfx Af Ascg

Būklė: naudotas, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger joint length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m, stepless. Consisting of the following components: - SMB vacuum destacking unit, longitudinal, with 2 lifting tables and 2 package roller conveyors, year 2013. Maximum package dimensions: 1.20 x 1.20 x 6.00 m, 4 suction pads, Sicko system. Singulation and feeding into roller conveyor for scanner loading, board turner, diverter for too moist, too dry, diverter for B-grade, marking station and/or automatic mode - Bidac end-grain scanner for cup detection, year 2013 - Brookhuis FMI 5 moisture measurement, year 2019 - Microtec scanner Goldeneye 502, year 2012 with X-ray, 4 colour cameras, and new optimization software - Dimter Opticut 350-2, year 2003 with paddle ejector (year 2009) and corresponding sorting belts and pneumatic ejector for 2 additional grades - NKT packaging system - NKT finger jointing system with rotary table Spezialpack AH 1050, year 2005, consisting of: milling unit, tilting station, threading section length 5.0 m, cycle press length 6.00 m, cross-cut saw - SMB stacking machine, year 1998, length 2.50 – 13.50 m, can be split into 2 units (e.g. 2 x 5.0 m), 8 stacking arms, 8 stacking tongues, manually and steplessly adjustable stop, electric/hydraulic, max. package width: 1200 mm, max. package height: 600 mm, hydraulic package pusher Storage location: Customer site Dcodpfx Afsvvi Tyo Aog

Būklė: geras (naudotas), Horizon VAC-100a + VAC-100m + SPF-200a + FC-200a Broschürenfertigungsstraße Die Maschine ist voll funktionsfähig und sofort einsatzbereit für die Produktion. Sehr geringe Laufleistung. Es handelt sich um eines der neuesten Modelle von Horizon. Die gesamte Anlage wird über das Bedienpanel eingestellt. Hergestellt in Japan. Die Linie besteht aus: – Horizon VAC-100a / VAC-100m Max. Format: 350 x 500 mm Min. Format: 120 x 148 mm Vakuum-Anleger 10 Stationen Stapelhöhe: 55 mm Grammatur: 40–270 g/m² Stromversorgung: 230V Gewicht: 310 kg/Modul Touchscreen-Steuerung Sensoren für Papierstau, Doppel- und Fehlbogen Speicherung von bis zu 9 Aufträgen im Systemspeicher Horizon SPF-200A 10,4" Farb-Touchscreen Unterbrechungsfreies Arbeiten durch Fehlzusammenstellungsausschleusung Max. Format: 508 x 356 mm; Min. Format: 180 x 120 mm Max. Geschwindigkeit: 4.500 Broschüren pro Stunde Gewicht: 500 kg Drahtheftung mit Rückenkantung Zwei Hohner-Heftköpfe Bis zu 200 Aufträge können gespeichert werden Zusätzliche Optionen: Drahtzufuhrkontrolle und Blockheftmodul Horizon FC-200A Schneidestärke: 4–5 mm Stromversorgung: 230V Gewicht: 244 kg Neues Trimmerdesign, stabile Arbeitsweise dank Servomotoren, zusätzliche Broschürenführung. Touchpanel für schnellen Formatwechsel. Formatumstellung per Knopfdruck. Dedpfx Asyur Nfjf Ajcg Im Lieferumfang enthalten: LC-200 Auslage, Bedienwerkzeug, Ersatzteile und Dokumentation.

Būklė: geras (naudotas), Hohner HSB 9000 skaitmeninė brošiūrų gamybos linija Įrenginys yra labai geros būklės ir paruoštas gamybai. Gamybos metai: 2019. Dsdpeyur Emefx Af Ascg Atspausdinta tik 0,4 mln. brošiūrų. Tai vienas naujausių Hohner modelių. Visas įrenginys valdomas iš valdymo pulto. Pagaminta Vokietijoje. Ideali mašina efektyviai brošiūrų gamybai skaitmeninėje spaustuvėje. Jutiklinis ekranas greitam reguliavimui ir belaidis nuotolinis valdymas. Įrenginys parduodamas su įrankiais, atsarginėmis dalimis ir dokumentacija.

Būklė: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Einseitiger Scanner für Sortierung oder Optimierung: Breite: 30–200 mm Höhe: 13–50 mm Länge: 2–6 m Dcsdpfx Afsv Tlgdo Ajg Erkennung möglich für: Äste, Holzstruktur, Risse, Endrisse, Farbabweichungen etc. Scan-Geschwindigkeit: bis zu 200 m/min Verschiedene Profiltypen scannbar

Būklė: reikia remonto (naudotas), 680 NAUDOTAS duonos ir batonų ilgintuvas. Įrangai reikalingas remontas. Dcedpfxepy D S Ee Af Aog IŠORINIAI MATMENYS (cm): - plotis 105, - ilgis 320, - aukštis 180. - darbo plotis 50 (maksimalus batonų ar duonos ilgis) Įrenginį galima apžiūrėti mūsų sandėlyje (36-068 Bachórz, Lenkija). Galimos papildomos mokamos paslaugos: transportavimas. Nurodyta kaina yra be PVM. KALBAME ANGLŲ, VOKIETIŠKAI, PRANCŪZIŠKAI, RUSIŠKAI IR UKRAINIETIŠKAI.

Būklė: naudotas, Sprzedam w pełni zmontowaną i działającą linię do produkcji pelletu o wydajności do 3 ton na godzinę. Fabryka jest mało używana – wyprodukowano jedynie 16 000 ton, jej stan techniczny i wizualny jest bardzo dobry. Idealna do profesjonalnej produkcji pelletu z biomasy drzewnej, agrobiomasy lub innych surowców. Instalacja zakładu nie wymaga dodatkowych pomieszczeń – prasa do pelletu jest już zabudowana w kontenerze. Linia zawiera: • Prasę i młyn: Salmatec Maxima 700 – niezawodna niemiecka jakość, wysoka wydajność i długoterminowa stabilność pracy. • Urządzenia transportowe i dozujące: Rematec – solidne, precyzyjne podawanie materiału na wszystkich etapach. • Namiot chroniący przed warunkami atmosferycznymi. • Dodatkowe wyposażenie: cyklony, sita, chłodnica, szafa sterownicza itp. Dostępne są wszystkie pliki DWG i rysunki fundamentów pod urządzenia. Główne zalety: Dcjdpfex S Egmjx Af Ajg • Duża wydajność produkcyjna – do 3 t/h. • Wysokiej jakości komponenty renomowanych europejskich producentów. • Możliwość adaptacji do różnych surowców. • Linia w pełni sprawna – możliwość prezentacji w ruchu. • Dostępna od ręki.

Būklė: reikia remonto (naudotas), 672 NAUDOTAS įrenginys ciabattai, kaimiškai duonai, įvairių dydžių ir storių gaminti. Įrenginys reikalauja remonto. IŠORINIAI MATMENYS: -ilgis: 300, -plotis: 85, -aukštis: 155. Įranga yra mūsų sandėlyje (36-068 Bachórz) Galime atlikti įrenginio remontą, montavimą, paleidimą bei išduoti garantiją. Nurodyta kaina yra grynoji kaina. Dsdpfjpm Hmzox Af Ajcg KALBAME ANGLŲ, VOKIEČIŲ, PRANCŪZŲ, RUSŲ, UKRAINIEČIŲ KALBOMIS.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Juostos plotis: maks. 1.600 mm Juostos storis: 0,4 - 3 mm Juostelių kiekis: maks. 11 Ritės svoris: maks. 25 t Ritės išorinis skersmuo: maks. 2.000 mm Ašies skersmuo: 508/610 mm Pagaminimo metai: 1990/2002/2006/2016/2019 Djdpfsy Nypkjx Af Ajcg

Būklė: reikia remonto (naudotas), 616 NAUDOTA linija mėsainiams, picoms, dešrainiams, pinsai, čabatoms gaminti. Turi atitinkamą įrangą aukščiau nurodytiems gaminiams. Linijai reikalingas kapitalinis remontas. IŠORINIAI MATMENYS (cm): - ilgis 970, - plotis 100, - aukštis 193. ĮRANGA: - miltų barstymas po tešla, - išpjaustymo stotis, Dcsdpfx Afoncfgdo Asg - valcavimo, presavimo (tešlos sujungimo) stotis, - sėklų barstymo stotis, - giljotina su įvairiais sausainių išpjovimo šablonais, - atlieku šalinimo stotis, - formavimas ant kepimo padėklų stotis. Įrenginys yra mūsų sandėlyje (36-068 Bachórz) Galimas mokamas pristatymas. Nurodyta kaina yra be PVM. KALBAME ANGLŲ, VOKIETŲ, PRANCŪZŲ, RUSŲ, UKRAINIEČIŲ kalbomis.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Optimizavimo pjūklas Grecon Dimter OptiCut 304R Įeinančios medienos ilgis min. 900 mm, kraunant ant skersinio grandininio transporterio Medienos plotis min./maks.: 40-200 mm Medienos storis min./maks.: 15-80 mm Nuleidimas, pjovimas ir pagreitinimas: 0,5–1 sek. Pjovimo tikslumas: min. 0,8 mm, maks. 1,5 mm Maksimalūs medienos profiliai: 200×25 mm, 170×50 mm, 80×80 mm, 140×60 mm Pjūklo disko skersmuo: 400 x 30 mm Pjūklo disko sukimosi greitis: 4200 aps./min. Maks. padavimas: 170 m/min Išvedimo juostinis transporteris su 6 stūmikliais Pjovimo režimai: 1. Pjovimas nustatytu ilgiu Dsdpfx Afjyxltyj Aecg 2. Ilgio optimizavimas siekiant didžiausio našumo 3. Medienos defektų šalinimas su defektų žymėjimu kreida Bendras linijos ilgis: 21 m Pagaminimo metai: 2000

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Dosing/Filling Line The dosing/filling line consists of: Djdpowaty Rsfx Af Ascg 1. Product pump with feed hopper Brand: Rademaker B.V. Dimensions: 1700 mm x 1100 mm x 2250 mm 2. Dosing unit Dimensions: 1700 mm x 1100 mm x 2250 mm 3. Conveyor belt Brand: Meyer Plastic mesh belt Belt width: 910 mm Overall dimensions: 3400 mm x 1500 mm x 1690 mm Includes trolley with additional parts.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Cutting line Brand: Schomaker Djdowatwijpfx Af Ajcg Comprising: 1. Infeed conveyor Plastic belt Belt width: 90 mm Overall dimensions of infeed conveyor: 1800 mm x 850 mm x 1200 mm 2. Slicer Mesh belt Belt width: 250 mm Working width: 250 mm Overall dimensions of slicer: 1120 mm x 1500 mm x 1700 mm 3. Outfeed conveyor Mesh belt Belt width: 250 mm Overall dimensions of outfeed conveyor: 2800 mm x 550 mm x 1200 mm

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Webomatic packaging line, consisting of: 1. Double-chamber vacuum machine Brand: Webomatic Model: PNC 20A-D-M2 Machine number: 555912033 Voltage: 220/380 V, 50 Hz, 3.5 A Seal length: (2x) 800 mm Chamber dimensions: 800 mm x 600 mm Overall dimensions: 2000 mm x 1100 mm x 1350 mm 2. Shrink tunnel Brand: Webomatic Model: STP 60/80 D+E Number: 72911302 Voltage: 380 V, 3 Phase, 50 Hz, 35 A Dimensions: 1300 mm x 900 mm x 1400 mm 3. Roller conveyor Dsdpfjwatw Nsx Af Ajcg Dimensions: 2000 mm x 700 mm x 800 mm

Būklė: naudotas, Gamybos metai: 2000, veikimo valandos: 26 600 h, mašinos/transporto priemonės numeris: LC612, Used Tetra Pak Line Overhauled TBA 19 200 ml Slim Technical Specifications & Performance Data This used filling line is a second-hand solution from Tetra Pak for aseptic carton packaging, configured for 200 ml slim packs. It is designed for industrial packaging and beverage production of milk and fruit drinks, delivering reliable performance and efficient downstream handling. Configuration: Tetra Pak TBA/19 200B Slim Filler + TSA21 Straw Applicator + TCP70 Carton Packer + Conveyor Line + Line Controller and Paper Cart Production speed: up to 7,500 packs/hour Pack volume: 200 ml Slim Filling technology: Aseptic Dcedsyvilzspfx Af Aog Container type: Carton (brick packs) Main models and codes: TBA/19 200B (Dev. Step 010V), TSA21, TCP70 Operating hours: 26,600 Year of manufacture: Filler 2000, Packer 2008, Straw Applicator 2000 Advanced Automation & Control Systems The line features an industrial automation architecture suitable for high-availability food and beverage production. The assessment indicates a GE PLC platform for downstream equipment, with recommended PLC and I/O coverage upgrades to ensure long-term reliability. Control: Central line controller with integrated conveyor logic PLC/HMI: GE PLC upgrade recommended for downstream modules Format change: 200 ml slim format change kit included; further format parts may be required for other sizes Safety: Safety guards and interlocks as per aseptic packaging machinery Production Line Integration Capabilities This used filling line is designed for in-line operation from aseptic filling through straw applicator to carton packaging. Conveyor belts ensure smooth transitions between machines and enable balanced production flow as well as efficient accumulation. In-line operation: Filler → Straw Applicator → Carton Packer Material handling: Conveyor line connected to line controllers Applications: Ideal for milk and juice in 200 ml slim cartons Scalability: Potential for adaptation to other carton sizes with appropriate change parts Machine Condition & Maintenance History The line was assessed after maintenance and prior to full commissioning. The filler can be operated up to the production step (water test completed). Downstream equipment powers up but requires further intervention before heating and full operation. An overhaul is recommended, including component replacement in the superstructure, main frame, jaw system, end-fold, service unit, strip applicator, and electrical systems. Current status: Under maintenance/conversion Condition summary: Filler fair/serviceable condition

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, veikimo valandos: 150 494 h, Funkcionalumas: visiškai funkcionalus, GRAF SYNERGY / FIMTEC suvirinimo ir valymo linija, pagaminta 2013 m. Darbo kryptis iš kairės į dešinę. Keturgalvė suvirinimo staklės SL4U, maks. matmenys 2800 x 3200 mm, min. 400 mm, atliekų siūlė 0,2 mm. Valymo įrenginys WP CNC 2 TR. Aušinimo stotis. Peiliai lygių paviršių su grioveliu ir lygių plokštumų valymui. Tik 150494 ciklai – techninė būklė labai gera. Dcjdjyyxvwepfx Af Aeg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 450 mm, pjovimo aukštis (maks.): 100 mm, pjovimo plotis (maks.): 200 mm, įvesties srovės tipas: trifazis, paskutinio kapitalinio remonto metai: 2025, For sale: Metal Technika OWD-1600 Optimizing / Crosscut Saw, year 2018. The machine is fully operational and ready for work – ideal for fast and precise cutting of elements in serial production. A major advantage of this machine is the ability to set a cutting schedule for up to 8 positions: you enter the dimension + quantity, and the machine automatically performs the cuts and moves to the next positions without the need for retooling. Technical specifications: Model: Metal Technika OWD-1600 Year of manufacture: 2018 Max material width: 200 mm Max material height: 100 mm Max board length: 3200 mm Feed speed: approx. 30 m/min Saw blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: The machine operates very efficiently – for example: Dcedsyv Ewmjpfx Af Aeg - Package of 8 boards, 12 mm each - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm) - Cycle time: approx. 10 seconds The machine can be inspected and tested on site. Location: Elbląg / Warmian-Masurian Voivodeship If you have any questions, please feel free to contact me.

Būklė: naudotas, Gamybos metai: 2017, veikimo valandos: 30 000 h, mašinos/transporto priemonės numeris: LC566, Used CFT Can Filling Line for Soft Drinks – 12,000 Cans per Hour Introduction and Production Capacity The used CFT can filling line for soft drinks – 12,000 cans per hour – provides a complete solution for filling carbonated beverages into aluminum cans. CFT manufactured the line in 2017 and configured it for two slim formats commonly used in the soft drinks industry. Specifically, the system processes up to 12,000 cans per hour, meeting the production needs of mid-sized operations. The owner will release the line for sale as of 30/06/2025, making this offer a valuable opportunity for companies seeking to expand their production capacity. Depalletizing and Initial Inspection First, the CFT depalletizer automatically separates the empty cans and introduces them into the production flow. Next, a HEUFT inspection unit checks each can for visible defects and dimensional deviations. This ensures that only clean, undamaged cans proceed to the rinsing process. Additionally, this early inspection step further reduces the risk of equipment downtime later in the process. Can Transport and Rinsing Subsequently, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the inside of each can with pressurized water jets or sterile air blasts, thereby meeting hygiene requirements according to food and beverage regulations. The dual-channel configuration also improves throughput and reduces contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling After rinsing, a CFT monoblock performs the filling and seaming operations with 12 filling valves and 4 seaming heads. The machine efficiently handles both 150 ml and 330 ml cans and precisely regulates pressure and temperature to prevent CO₂ losses during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity, ensuring consistent quality at high speeds. Filled Can Inspection and Ejection Following the filling step, another HEUFT unit inspects the filled cans to verify fill levels, seam integrity, and the absence of leaks. If any non-conforming cans are detected, an automatic HEUFT rejection module removes them from the line. This safeguards the quality of downstream processes and prevents unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveying and Packaging Dcjdpfx Afoy I R Eao Ajg Thereafter, CFT conveyors transport the approved cans to a SMI shrink wrapper, which forms bundles in several formats: 4×3 (12 cans), 6×4 (24 cans), and 2×2×3 (12 cans). This flexible configuration supports various packaging and distribution strategies. In addition to improved logistics, this packaging versatility allows for quick product changeovers, enabling the line to adapt to different market requirements. Mixing, Carbonation, and Labelling Prior to filling, a CFT mixer/carbonator prepares the product by adjusting the syrup-to-water ratio and saturating the liquid with CO₂...

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, Log handling line, LINCK sawmill line, sawn timber sorting line with stacking system Log handling line: - Infeed - Cross-cutting - Log turner - Emergency outfeed channel, option for log ejection - Butt reducer (debarking head) - Valon Kone debarker - Metal detector - Hellak DLV 720 - Log sorting line - 32 bins LINCK sawmill line: LINCK V40 canter, year 1997 • Maximum log diameter: 650 mm • Minimum log diameter: 100 mm • Maximum log length: 6 m • Minimum log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutting head drive power: 90/132 kW • Number of knives: 3 • Cutting depth: 160/200 mm LINCK CSMK 375-A3/B3 multi-blade saw, year 1997 • Minimum wood length: 3.00 m • Minimum cut material thickness: 50 mm • Maximum cut material thickness: 375 mm • Feed speed (frequency-controlled): 25-70 m/min • Saw blade diameter: 648 mm • 648x5.7/3.5/6.8x160 Left • 648x5.7/3.5/6.8x160 Right • 648x5.7/3.5/x165 Disc • Shaft rotation speed: 2500 rpm • Saw shaft drive power: 110 kW • Weight (with motors): 18,800 kg LINCK DV 55 turner, year 1996 • Feed speed: 36.2 m/min • Maximum wood diameter: 550 mm LINCK V30 canter, year 1996 • Maximum log diameter: 500 mm • Minimum log diameter: 100 mm • Maximum log length: 6 m Dsdpfx Ajyyd Tnsf Aecg • Minimum log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutting head drive power: 90/132 kW • Number of knives: 2 • Cutting depth: 160 mm LINCK VP34 milling machine • Minimum wood length: 3 m • Maximum wood length: 4,900 mm • Maximum planing depth: 50 mm • Maximum cutting height: 120 mm • Minimum board width: 60 mm • Feed speed (50Hz): 41.7 m/min LINCK S2 VS 66 S saws • Minimum wood length: 3 m • Cutting height with inner saw: 280 mm • Cutting height with outer saw: 280 mm • Feed speed: 36 m/min • Saw blade diameter: • 505x5.2/3.6/6.8x120 mm Left • 505x5.2/3.6/6.8x120 mm Right LINCK S3 VSV 80-A multi-blade saw, year 1988 • Minimum wood length: 2.50 m • Cutting height: 280 mm • Feed speed: 40 m/min • Saw blade diameter: • 510x5.2/3.6/6.8x120 mm Right • 510x5.2/3.6/x120 Discs LINCK KH1 horizontal saw, year 1985 • Minimum wood length: 3 m • Minimum cutting height: 60 mm • Maximum cutting height: 140 mm • Maximum cutting depth, right saw: 140 mm • Maximum cutting depth, left saw: 140 mm • Minimum cutting depth: 130 mm • Feed speed: 40 m/min • Saw blade diameter: 520x5.8/4.0x150 mm Sawn timber sorting: Sorting of sawn timber by length, width, and height 32 bins for sawn timber Stacking system and timber package formation The offered line has an actual capacity of approximately 70,000 - 110,000 m3 per year on a single shift. Large spare parts warehouse. Sharpening room. For an additional cost, professional dismantling, loading, and commissioning at the new location are available.