Arburg Vertikalios Įpurškimo Liejimo Mašinos pirkti naudotą (41 738)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Krauss Maffei Injection Moulding Machine KM 250 – 1900 C1 Year of manufacture: 2007 Control system: MC4 Operating hours only – 8,900!!!!! Clamping Unit: Clamping force: 2,500 kN Max. mould opening force: 160 kN Movable platen traverse force – opening: 86 kN Movable platen traverse force – closing: 68 kN Ijdpjw A N Hfjfx Alrsic Mould platen dimensions (H × L): 995 × 1,050 mm Tie bar spacing (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/back): 58 / 28 kN Injection Unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Injection weight (for PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Max. plasticising rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic Equipment: Pump motor power: 55 kW Installed heating capacity: 30 kW Number of barrel heating zones: 6 Oil tank capacity: 720 l Dimensions and Weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Maximum mould weight: 3,430 kg Accessories and Additional Equipment: Oil tank Anti-vibration pads 3 × core pullers 8 × hot runner control zones 2 × air valves Robot interface as per Euromap 67 Additional information: Machine is located in Poland Ready for collection Option to arrange loading, transport, installation, and commissioning

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Krauss Maffei KM 110–750 CX Injection Moulding Machine Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control unit with colour monitor, integrated control panel, and 3 USB ports. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Iiedpfx Aex Avhyelrsc Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1100 kN Mould opening force: 70 kN Movable platen traverse force: – opening: 35.4 kN – closing: 31.4 kN Platen dimensions (h × v): 745 × 770 mm Tie bar clearance (h × v): 470 × 470 mm Mould opening stroke: 600 mm Mould installation height: 300 mm Platen opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical and Hydraulic Equipment Rated pump motor power: 22 kW Installed heater power: 15.62 kW Number of barrel heating zones: 5 Dry cycles according to Euromap: 2000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Batų injekcijos mašina Battenfeld HM 300/1330 Iisdpfsxyqw Rox Alroc Gamintojas: Battenfeld Mašinos tipas: HM 300/1330 Metai: 2011 Kategorija: Injekcinio liejimo mašinos Mašina labai geros techninės būklės, visiškai veikianti, paruošta nedelsiant dirbti. Puikiai tinka pramoninei gamybai, reikalaujančiai didelio našumo ir patikimumo. Uždarymo blokas Uždarymo jėga: 3000 kN Tvirtinimo plokščių matmenys (aukštis × plotis): 1020 × 1030 mm Atstumas tarp kolonų (aukštis × plotis): 710 × 610 mm Minimalus / maksimalus formos aukštis: 375 mm Maksimalus atidarymo plotis: 1150 mm Injekcijos blokas Sraigto skersmuo: 55 mm Injekcijos tūris: 653 cm³ Injekcinio užpildo svoris: 600 g Injekcijos slėgis: 2040 bar Matmenys ir svoris Ilgis × plotis × aukštis: 12,2 m Mašiną galima apžiūrėti ir išbandyti pajungus prie elektros tinklo. Pagal pageidavimą galime atsiųsti nuotraukas ir vaizdo įrašus iš demonstracijų. Galima organizuoti pakrovimą ir transportavimą.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Demag Multi 80/420-80h/120v Injection Moulding Machine Year of manufacture: 2005 TWO MACHINES AVAILABLE Machine type: Two-component injection moulding machine (2K) Control system: NC4 Control Drive type: Hydraulic Technical data – clamping unit Clamping force: 800 kN Clearance between tie bars: 420 × 420 mm Platen dimensions: 590 × 600 mm Minimum mould height: 250 mm Maximum mould opening stroke: 500 mm Maximum distance between platens: 750 mm Injection unit – two components First unit (horizontal): Nitrided screw Screw diameter: 22 mm Second unit (vertical): Bimetallic screw Screw diameter: 25 mm General information Motor power: 18.5 kW Heater power: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Ijdpfx Aleww H S Ijreic Total weight: 4,100 kg Equipment and additional information Control language: German Full machine history – available

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, Liejinimo mašina ENGEL DUO 11050/2300 Pagaminimo metai: 2004 Darbo valandos: 70 029 Uždarymo mazgas Uždarymo jėga: 2 300 kN Tvirtinimo plokščių matmenys (H x V): 2 900 × 2 500 mm Isdpfx Alsxq D H Tjreic Atstumas tarp kolonų (H x V): 2 000 × 1 600 mm Min./maks. formos aukštis: 700 – 1 890 mm Maksimalus atidarymo eiga: 3 800 mm Įpurškimo mazgas Sraigto skersmuo: 135 mm Įpurškimo tūris: 8 870 cm³ Įpurškimo svoris (PS): 8 071 g Įpurškimo slėgis: 1 600 bar Matmenys ir svoris Grynoji masė (su valdymo spinta): 113 + 18 t

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising Unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, opening: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Max. daylight: 1150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Pump motor power: 45 kW Heater power: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke according to Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and weight Isdpfx Alew U Rcdoroic Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Krauss Maffei KM 350-2700 C2+ Injection Moulding Machine Year of manufacture: 2004 System: Fully hydraulic Control system: MC4, colour monitor, integrated control panel, built-in disk drive 2. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasive protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Iijdpfox Elukjx Alrsc Clamping force: 3500 kN Mould opening force: 220 kN Moving platen traverse force: - Opening: 105 kN - Closing: 95 kN Platen dimensions (H × V): 1060 × 1095 mm Tie bar spacing (H × V): 710 × 710 mm Mould opening stroke: 920 mm Mould height installation: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Output at standard speed: 108 g/s Output at increased speed: 141 g/s Electro-hydraulic Equipment Pump motor power: 75 kW Installed heater power: 36 kW Number of cylinder heating zones: 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and Weight Net weight (with control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Krauss Maffei Injection Moulding Machine KM 420-2700 C2 Year of Manufacture: 2002 Machine Description The Krauss Maffei KM 420-2700 C2 injection moulding machine is a robust and precise machine with a high clamping force of 4200 kN, designed for processing thermoplastics. Equipped with a reliable hydraulic system and a precise control unit, it ensures stable and repeatable operation under demanding production conditions. Technical Data Clamping Unit Parameter Unit Value Clamping force kN 4200 Maximum mould opening force kN 250 Moving platen shift force – opening kN 124 Moving platen shift force – closing kN 102 Platen dimensions (H × L) mm 1270 × 1200 Tie bar spacing (H × L) mm 800 × 800 Mould opening stroke mm 1020 Minimum mould height mm 380 Maximum daylight mm 1400 Ejector force (forward / backward) kN 95 / 48 Maximum mould weight kg 6700 Injection Unit Parameter Unit Value Screw diameter mm 70 Iedpfoxq Akksx Alreic L/D ratio – 20 Injection pressure bar 1829 Shot volume cm³ 1097 Shot weight (PS) g 998 Injection rate cm³/s 513 Max. plasticising rate g/s 108 Nozzle contact force kN 173 Electrical and Hydraulic Equipment Parameter Unit Value Rated pump motor power kW 75 Installed heating capacity kW 36 Number of cylinder heating zones – 7 Oil tank capacity l 1075 Dimensions and Weight Parameter Unit Value Machine dimensions (L × W × H) m 7.06 × 2.33 × 2.51 Total machine weight kg 20,500

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with a robot Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Tie bar clearance (W × H) 1,120 × 1,000 mm Min. / max. mould height 500 – 1,050 mm Max. daylight between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Max. mould weight 7,200 kg Injection unit Parameter Value Screw diameter 130 mm Injection volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electrical & hydraulic equipment Parameter Value Iijdpfjwy U E Ujx Alrec Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions & weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (ancillary equipment)

Būklė: geras (naudotas), Gamybos metai: 1998, veikimo valandos: 83 000 h, varžto skersmuo: 50 mm, bendras svoris: 7 400 kg,

Būklė: geras (naudotas), Gamybos metai: 1995, veikimo valandos: 44 283 h, Funkcionalumas: visiškai funkcionalus, varžto skersmuo: 30 mm, darbinio tūrio: 98 cm³, injekcijos svoris: 88 g, bendras svoris: 5 300 kg,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, veikimo valandos: 14 500 h, Funkcionalumas: visiškai funkcionalus, 1 used two-component injection moulding machine with robot and rotary table Iodpfx Aou E E Suslrjic Manufacturer: ARBURG Model: 470S1100-400/290 Year of manufacture: 2017 Clamping force: 110 tons Tie bar spacing: 420 x 420 mm Minimum/maximum mould height: 450 mm Opening stroke: 950 mm Screw diameter 1: 35 mm Max. shot volume: 154 cm³ Shot weight: 141 g/PS Screw diameter 2: 30 mm Shot volume: 106 cm³ Shot weight: 97 g/PS Control system: SELGOCIA Features: - 3 core pulls - Vertical injection unit - Rotary table - 6-axis robot, Manufacturer: KUKA, Model: KR 16 Wikut, Year: 2010 - Conveyor belt - Safety fence

Gamybos metai: 1986, būklė: paruoštas naudoti (naudotas), Clamping force: 2,700 kN, injection volume: 20,300 cm³, injection pressure: 1,360 bar, total power: 418 kW. The machine was completely overhauled in 2008, received new pumps, and all bushings and guides were replaced. In 2016, the machine was fitted with a new Siemens control system. In 2021, all pumps and valves were recalibrated, and all slideways were renewed. Iijdpfspvkzyox Alrec

Gamybos metai: 2003, būklė: paruoštas naudoti (naudotas), Clamping force: 500 kN, heating capacity: 4.9 kW, connected load: 19.9 kW, operating hours: 57,024 h, equipped with handling system and conveyor belts, without dosing unit. Iiedpfxomrri De Alrec

Gamybos metai: 2004, būklė: paruoštas naudoti (naudotas), Injection force: 113 kN, clamping force: 500 kN, opening stroke: 50 mm, weight: 4.4 t, supplied with documentation and software. An on-site inspection under power is possible. Iiedpfxop S Srhe Alroc

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, 1 used injection moulding machine with robot Manufacturer: ARBURG Model: 420C1000-350 Isdpfx Aju E E Hlelroic Year of manufacture: 1999 Clamping force: 100 tonnes Tie bar spacing: 420 x 420 mm Screw diameter: 40 mm Shot volume: 182 cm³ Shot weight: 172 g/PS Control system: SELGOCIA Equipment: - Robot, Manufacturer: GEIGER, Model: LR21, Year: 1998 - 2x core pullers

Būklė: naudotas, Gamybos metai: 2000, Clamping force: 900 kN Clamping platen: 540 x 540 mm Distance between tie bars: 350 x 350 mm Machine weight: approx. 5.5 t Clamping stroke: 280 mm Ejector force: 60 kN Ejector stroke: 70 mm Mould height: 160–400 mm Tie bar diameter: 65 mm Casting force: 75 kN Casting stroke: 130 mm Casting piston diameter: 50, 55, 60 mm Casting volume (DIN 24480): 119, 163, 214 cm³ Specific casting pressure: 380, 315, 265 kp/cm² Corresponding parting surface: 236, 285, 340 cm² Downstroke: 150 mm Completely overhauled DAW 80 GO die casting machine with DataLogic control system for use with zinc alloys. Excerpt from the general overhaul: · Upgrading the machine with a new control cabinet and new operator panel, including replacement of all electrical wiring. · Renewal of hydraulics (blocks and valves). · Overhaul of the clamping unit. Detailed list available upon request. The machine is equipped with the following options: - Motor-driven safety door, casting direction left - Discharge chute cover on the machine base (straight) - Free-standing operator panel 1.0.2 Discharge chute cover for machine base 3.2.4 Multi-chamber holding and melting furnace with TOC pump 3.2.1 Furnace control cabinet for furnace type Z 4.0.1 Use of water-glycol 4.2. – Side GO 6.1.3.1 Wired signal interface for part removal (DISPO10) 6.5.2 RSD equipment package with switch Iiodeyzt D Eopfx Alrsc 7.2.2.2 Spraymotion 611 E with servo drive, single-circuit 7.3.1 Release agent container TD 20 7.4.0.3 Spray bar CR 275 Additional options are available upon request.

Būklė: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 2007, Funkcionalumas: neveikiantis, For sale is an injection molding machine by Netstal, model Synergy 1000-230. Due to a transport accident, the control cabinet is completely defective. For this reason, the machine is offered as a source of spare parts or for repair. The machine was fully operational and in good condition prior to the incident. Technical data: - Operating pressure: 210 bar - Injection force: 182 kN - Clamping force: 1000 kN - Opening stroke: 0–400 mm - Mold installation height: 450–750 mm - Total weight: 7,200 kg - Operating hours: approx. 53,000 Available from March 2024 Initial hydraulic oil fillings can be ordered from us. On request and for an additional fee, loading and transport (throughout Europe) can be organized. Prices plus VAT. Inspection possible by appointment. Contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase & sale Ijdpferfbnmex Alroic BUYING/SELLING PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for high-quality yet affordable metalworking machinery for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2003, veikimo valandos: 1 496 h, spaudimo jėga: 600 kN, varžto skersmuo: 35 mm, Įpurškimo vienetas Sraigto skersmuo: 35 mm Spaudimo vienetas Spaudimo jėga: 600 kN Šis Engel Victory 200/60 TECH gamintas 2003 metais. Mašina turi 35 mm sraigto skersmenį, 600 kN spaudimo jėgą ir 450 mm atsidarymo eigą. Mašina komplektuojama su robotu, o didžiausias plokščių atstumas siekia 700 mm. Jei ieškote aukštos kokybės liejimo įrangos, apsvarstykite galimybę įsigyti Engel Victory 200/60 TECH. Dėl išsamesnės informacijos susisiekite su mumis. Taikymo sritys Iisdpfex D Dkxox Alroc Liejamieji įpurškimo darbai

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, Bendri duomenys Isdpfx Aex D Ea Ijlrsic Matmenys (aukštis): 405 mm Matmenys Mašinos ilgis: 405 mm Spaudimo blokas Spaudimo jėga: 800 kN Ši Krauss Maffei 80-220 C1 pagaminta 2001 m. Ji pasižymi 800 kN spaudimo jėga ir 55 kN formos atidarymo jėga. Komplekte yra robotas, tačiau yra vakuumo gedimas. Puikiai tinka tiems, kurie nori sustiprinti savo įpurškimo liejimo gamybinius pajėgumus. Norėdami gauti daugiau informacijos apie šį įrenginį, susisiekite su mumis. Pritaikymo tipai Įpurškimo liejimas

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 800 kN, varžto skersmuo: 30 mm, For sale is an injection molding machine of the brand Demag, type 80/420-200 System. The machine is in good and fully functional condition. IMPORTANT: No backup diskettes available. Technical data: Year of manufacture: 2001 Clamping force: 800 kN Tie bar spacing (vertical): 420 mm Tie bar spacing (horizontal): 420 mm Platen size (horizontal): 590 mm Platen size (vertical): 600 mm Minimum mold height: 250 mm Maximum daylight: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Mold weight: 700 kg Screw diameter: 30 mm Dimensions: approx. 4.5 x 1.50 x 2 m Iedpsnfu I Ijfx Alroic Weight: 4 t On request, transport and loading can be organized Europe-wide at an additional cost. Prices plus VAT. Viewing is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Būklė: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 83 000 h, spaudimo jėga: 350 kN, varžto skersmuo: 25 mm, For sale is an injection moulding machine by Arburg, model 320S 350-60. Year of manufacture: 2000 Automatic operating hours: 83,000 Screw diameter: 25 mm Clamping force: 350 kN Cylinder length: 60 Transport can be organised Europe-wide upon request, at an additional cost. Iijdpfx Alohhuq Ajrsc Price incl. VAT Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 184686, spaudimo jėga: 1 000 kN, varžto skersmuo: 25 mm, tarpas tarp stulpų: 420 mm, darbinio tūrio: 54 cm³, injekcijos svoris: 45 g, For sale is an injection moulding machine from Arburg, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. The machine is offered without any peripherals. Rotary table, material feed, temperature control units, and additional accessories are not included. Technical data: Year of manufacture: 2001 Clamping force: Clear tie bar spacing: 420 x 420 mm Opening stroke: 500 mm Mould installation height: 250 mm Clamping plate dimensions: 570 x 570 mm Ejector stroke: 175 mm Screw diameter: 25 mm Theoretical shot volume: 54 cm³ Iiedpfxox E U Ele Alrsc Shot weight: 45 g/PS On request, transportation and loading can be arranged at an additional cost, across Europe. All prices are subject to VAT. Inspection by appointment is possible. Please contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Būklė: geras (naudotas), Gamybos metai: 2007, veikimo valandos: 47 963 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 kN, For sale is an injection molding machine from KraussMaffei, model KM 200-220/220 CZ Multinject. The machine is in fully functional and well-maintained condition. Technical data: Iodpfx Aorvimbelroic Year of manufacture: 2007 Clamping force: 200 t Injection units: 2 Automatic operating hours: 47,963 Dimensions: 5200 × 2200 × 2700 mm Weight: 11,500 kg Further technical details will follow shortly. The offer applies only to the machine itself; any peripheral equipment visible in the photos is not included in the offer. Upon request and for an additional fee, loading and transportation (across Europe) can be organized. Prices are subject to VAT. Viewing is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange is possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your own? For more information or contact options, please visit our website.

Būklė: reikia remonto (naudotas), Funkcionalumas: neveikiantis, spaudimo jėga: 1 600 kN, varžto skersmuo: 50 mm, tarpas tarp stulpų: 470 mm, For sale is an Arburg injection moulding machine, type 470 C 1600-800. The pump and a circuit board have been removed from the machine, therefore it is being sold as defective. Otherwise, the machine is in very good condition. Technical data: - Pump hours: 61,400 - Clamping force: 1600 kN - Tie bar distance (between columns): 470 x 470 mm - Ejector stroke: 225 mm - Screw diameter: 50 mm - Shot volume: 398 cm³ - Dimensions (LxWxH): 4335 x 1635 x 1950 mm - Weight: 6,950 kg The machine is offered without peripherals. Transport and loading can be arranged on request, for an extra charge, Europe-wide. Prices are subject to VAT. Viewing by appointment possible. Contact us – our team will be pleased to assist you. Trade-in or exchange possible! Machine purchase / sale Iiedpov Edrijfx Alrec PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.