Įpurškimo liejimo mašina

DEMAG Multi 80/420-80h/120v

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Demag Multi 80/420-80h/120v Injection Moulding Machine Year of manufacture: 2005 Machine type: Two-component (2K) injection moulding machine Control system: NC4 Control Drive type: Hydraulic Technical specifications – clamping unit Clamping force: 800 kN Tie bar spacing: 420 × 420 mm Platen dimensions: 590 × 600 mm Minimum mould height: 250 mm Maximum mould opening stroke: 500 mm Maximum daylight between platens: 750 mm Injection unit – two-component Ncedpfxsww H Nye Af Isl First system (horizontal): Nitrided screw Screw diameter: 18 mm Second system (vertical): Bimetallic screw Screw diameter: 25 mm General data Motor power: 18.5 kW Heater capacity: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Total weight: 4,100 kg Equipment and additional information Control language: German Full machine history available

Sąlyga: geras (naudotas), Gamybos metai: 2000, Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Platen dimensions: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm³ Njdpfx Asrthkuof Iecl Shot weight: 127 g New temperature control board ARB 777 (cost: €2,750)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7154-0118, spaudimo jėga: 800 kN, atvērimo eiga: 500 mm, plokštės plotis: 590 mm, plokštės aukštis: 600 mm, TECHNICAL DETAILS Control Type: NC 4 Control Clamping System: Hydraulic Clamping Force: 800 kN Clear Distance Between Tie Bars: 420 mm x 420 mm Platen Dimensions: 590 mm x 600 mm Minimum Mould Size: 250 mm Maximum Opening Stroke: 500 mm Maximum Distance Between Platens: 750 mm Ncsdpswp I Syofx Af Isl Screw Diameter (Horizontal): 18 mm Screw Diameter (Vertical): 25 mm MACHINE DETAILS Motor Power: 18.5 kW Heating Elements: 8.8 kW Dimensions (L x W x H): 3.9 m x 1.4 m x 1.9 m Weight: 4,100 kg Main Connection: 400 V, 50 Hz, 135 A Maximum Pressure: 210 bar Maximum Flow Rate: 130 l/min EQUIPMENT - Two-component machine - Nitrided horizontal system - Vertical arrangement with bimetallic screw - Complete machine documentation available

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Demag Ergotech - System 250/280-80 Clamping force: 25 tons Nodjhrw Amjpfx Af Iecl Screw diameter: 25 mm Year of manufacture: 2003 Sprue picker 2 units

Sąlyga: geras (naudotas), Gamybos metai: 2006, Clamping force: 250 tons Tie bar distance: 630 x 630 mm Mould height: 330 x 830 mm Opening stroke: 675 mm Maximum diameter: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm³ Ncsdorgw Exopfx Af Ijl Shot weight: 482 g Injection pressure: 2426 bar Cores: 2 Hot runners: 12 + Demag ergotech W733-0174 robot Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max. reach: 1000 mm X, 900 mm Y, 1400 mm Z, 2500 mm

Sąlyga: paruoštas naudoti (naudotas), Used Machine Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM 80 C1 Year of Manufacture: 2000 Ncsdeu Ti Sropfx Af Ijl Only 1 machine left in stock No lead time, available immediately Inspection possible by appointment The machine is no longer powered / No cooling water connection Professionally stored Technical Data: Clamping force (kN): 800 Mounting plate (mm): 610×610 Tie bar distance (mm): Mould height (mm): 250 Daylight opening (mm): 750 Control system: MC4 Screen language: German Injection unit screw diameter (mm): 45 Injection pressure (bar): 1878 Stroke volume (cm³): 275 Pump drive power (kW): 18.5 Heating capacity (kW): 13 Oil capacity (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Further photos available on request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Engel ES 330/80 HLS Clamping force: 80 tons Year of manufacture: 1998 Njdopdr Aispfx Af Ijcl Screw diameter: 35 mm Shot volume: 154 cm³ Enlarged platen: 660 x 560 mm Minimum mold installation height: 200 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Cooling units Brand: Ers Type: SC 110. V/5 Power: 8 kW Year: 2000 Ncedpfx Afod I Tlhj Ijl

Sąlyga: naudotas, Gamybos metai: 2001, Clamping force: 250 t Screw diameter: 70 mm Nsdsvbbvkopfx Af Iecl Tie bar spacing (vertical): 630 mm Tie bar spacing (horizontal): 630 mm Design: Horizontal Drive: Hydraulic

Sąlyga: naujas, Gamybos metai: 2018, Performance at 20,550/42°C Qa Coolant: R134a/1430 refrigerant Nedpfeul Ekpex Af Iecl Pressure: 20 bar Total power requirement: 14.5 kW Machine weight: approx. 186 kg Space requirement: approx. 0.5 x 0.5 x 2.1 m The models of the HYFRA Gamma series are designed as immersion coolers for cooling water, oil, and emulsions. These plug-and-play immersion coolers are ready for installation and can be utilized with a footprint as small as 0.5 m², making them ideal for integration into various machine layouts. Thanks to their compact construction, outputs of up to 28 kW are possible with a footprint of only 0.5 m². This provides significant flexibility advantages in production floor planning and noticeably increases productivity by allowing more manufacturing machines in the same area. In our compact immersion cooler models, the condenser is installed horizontally. As a result of this design, the immersion coolers generate significantly less waste heat, preventing internal components from being affected by it. A robust agitator ensures an even medium temperature in the lubricant tank for all immersion cooler models in the series. For routine cleaning, the HYFRA Gamma series can be easily lifted out of the tank using fixed crane lugs. Immersion cooler: High-performance cooling directly at the point of use How does an immersion cooler work? In immersion coolers, the evaporator of the cooler is immersed directly into the cooling medium. The fluid is housed in a tank and kept in constant, vigorous motion for efficient cooling. Powerful agitators support this process. What applications are immersion coolers suitable for? Immersion coolers are commonly used for controlling the temperature of cooling lubricants in filtration and mechanical engineering to ensure optimal device performance. They are also used in metalworking for indirect cooling of tools and workpieces. Typical applications include milling and grinding with CNC or conventional machine tools. Immersion coolers with modern controls and extensive features Depending on the cooling capacity, HYFRA Gamma model immersion coolers are equipped with either FreeSmart or FreeAdvanced control systems. The combination of the FreeAdvanced controller and a touch panel provides a structured overview and allows for easy monitoring of relevant values. Both freely programmable control systems come equipped with multiple digital and analog inputs and outputs. The FreeAdvanced controller also features a full-text display and supports Modbus-TCP.