Įpurškimo liejimo mašina

Arburg 420 C 1000- 150/60

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, veikimo valandos: 21 200 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 190332, Įranga: dokumentacija / vadovas, From 01.07.2025, used machines can also benefit from a special depreciation allowance of 30% per year for tax purposes. Injection Moulding Machine, 3-colour or 2-colour (the 3rd unit can be deactivated via software) (horizontal/vertical, and the 3rd in L-position with safety enclosure) ##### Can also be converted to 2-colour operation ##### Available immediately from our stock in Hanover Manufacturer: Arburg Model: 420C 1000-150/150/60 Year: 2003 Machine number: 190332 Control system: Selogica Operating hours: only 21,200 h +++++ Clamping Unit +++++ Control: Selogica Clamping force: 1000 kN / 100 t Tie bar distance: 420 x 420 mm Platen size: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic ++++ Injection Unit 1 (150 unit) ++++ Screw diameter: 15 mm (high-wear resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2750 bar ++++ Injection Unit 2 (150 unit) ++++ Screw diameter: 15 mm (high-wear resistant) Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2750 bar ++++ Injection Unit 3 (60 unit) ++++ Screw diameter: 15 mm (high-wear resistant) Hfedpegrzh Eofx Ai Ten Shot volume: 17 ccm Shot weight: 15 g Injection pressure: 2080 bar Extras 1 x ALLROUNDER 420 C 1000 - 150 / 150 / 60 1 x Vertical injection unit mounted on supports for 2nd injection unit (instead of on tie bars), manually operated, working position adjustable between 70 and 250 mm VE-404/02 2 x core pull 1 x open nozzle 15 mm, wear-resistant, without heating band (1st inject. unit 150) VE-902/00 1 x technology level 2 – servo-regulated hydraulic system with two regulated pumps for controlled machine movements, with travel-dependent, regulated ramping. Mould closing force build-up is programmable and regulated. The clamping force is held servo-regulated via the second pump. The build-up of nozzle contact force is programmable. Contact force manually adjustable; value is electronically maintained. 1 x technology level 3 hydraulic system with 3 regulated pumps for simultaneous movements of the main axes and faster secondary axis movements. On 2-component machines, this serves as hydraulic system for 2nd injection unit (technology level 2 required, VE 132/03) VE-130/40 1 x heating band for open nozzle VE-320/00 1 x 150 injection unit for vertical injection into the mould split line for 2-component processing VE-136/02 1 x position-regulated screw with control valve on the injection unit, including regulated back pressure, nozzle contact force manually adjustable VE-561/20 1 x position-regulated screw with control valve on multi-component machines – for 2nd injection unit VE-561/30 1 x 60 injection unit for horizontal injection into the mould split line as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 x for VE-906/00: 60 injection unit in L-position; unit lowered by 70 mm, including special separating plane, full protection VE-907/00 1 x 15 mm plasticising cylinder set (without nozzle), with relocated feed and pressure reducing valve, in highly wear-resistant design with sintered metal check valve (L-position) VE-908/00 1 x open nozzle 15 mm, wear-resistant, without heating band (L-position) VE-909/00 1 x nozzle tip with radius 15 (L-position) VE-910/00 1 x heating band for open nozzle (L-position) VE-911/00 1 x position-regulated screw for the third injection unit

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Uždarymo jėga: 25 tonos Atstumas tarp kolonų: 270x270 mm Didžiausias atidarymas: 275 mm Min Formos aukštis: 200 mm Formos plokščių dydis: 400 x 400 mm Sraigto diametras: 18 mm Įpurškimo tūris: 20 cm³ Hedpfevl Skgsx Ai Tsfn Šūvio svoris: 17 g Įpurškimo slėgis: 2500 bar Darbo valandos: 38 035 h

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, spaudimo jėga: 1 000 kN, varžto skersmuo: 25 mm, 2002 m. pagamintas hidraulinis liejimo staklės. Šios „Arburg 420 C 1000-150/60“ staklės pasižymi 1 000 kN užspaudimo jėga ir maksimalaus formos aukščio 750 mm. Jos sraigto skersmuo yra 25/22 mm, o maksimalus įpurškimo tūris – 54/30 cm³. Jei norite įsigyti aukštos kokybės liejimo įrangą, apsvarstykite galimybę įsigyti mūsų siūlomą „Arburg 420 C 1000-150/60“ mašiną. Dėl išsamesnės informacijos susisiekite su mumis. Hfjdpfxsz Dk Sge Ai Tsn • Atstumas tarp kolonų: 420 x 420 mm • Maksimalus formos aukštis: 750 mm • Mažiausias formos aukštis: 350 mm • Sraigto skersmuo: 25/22 mm • Maksimalus įpurškimo tūris: 54/30 cm³ • Maksimalus įpurškimo slėgis: 2500/2340 bar • Centravimo žiedas: 125 mm • Karštieji kanalai mašinoje: 2 • Šerdies ištraukiklis: 1

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2003, veikimo valandos: 21 200 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 190332, spaudimo jėga: 1 000 kN, injekcijos svoris: 15 g, išmetimo jėga: 66 000 N, išstūmimo eiga: 225 mm, plokštės ilgis: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar distance: 420 x 420 mm Platen dimensions: 795 x 795 mm Mold height: 300 mm Maximum platen opening: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (abrasion-resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h EQUIPMENT - 1 vertical injection unit mounted on supports for the 2nd injection unit instead of on the clamping platen, operated manually, working position adjustable between 70 and 250 mm - 2 x core pulls - Open nozzle 15 mm, wear-resistant, without heating band (1st injection unit 150) - Technology level 2 – servo-controlled hydraulic system with two variable displacement pumps - Technology level 3 hydraulic system with 3 variable displacement pumps for simultaneous movements - Heating band for open nozzle - 150 injection unit for vertical injection into the parting line for 2-component processing - Position-regulated screw with control valve on injection unit, including regulated back pressure - Position-regulated screw with control valve for multi-component machines – for injection unit 2 - 60 injection unit for horizontal injection into the parting line as the 3rd injection unit - On VE 906/00, the 60 injection unit in L-position: unit lowered by 70 mm - Plasticizing cylinder assembly 15 mm (without nozzle), with relocated feed throat and pressure reducing valve - Open nozzle 15 mm, wear-resistant, without heating band (L-position) - Nozzle tip with radius 15 (L-position) - Heating band for open nozzle (L-position) Hjdpfey Hki Aex Ai Tsfn - Position-regulated screw for the third injection unit - Documentation/manual

Būklė: geras (naudotas), Gamybos metai: 1995, Description Control: Sinumerik 810M Spindle speed: 5000 rpm 12-position turret Table clamping surface: length 850 mm, width 325 mm Very good condition, regularly maintained. Operating manual in German Number of axes: 3 (X, Y, Z) Travel X: 420 mm, Y: 330 mm, Z: 240 mm Control system: Sinumerik 810M Hfsdpfx Asvt Amusi Ten Max. spindle speed: 5000 rpm Automatic tool changer for 12 tools Tool holder: SK40 Coolant system

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, spaudimo jėga: 1 000 kN, Arburg 420C-1000-60-150 (123) 2-Component With Robot and Safety Guard Year of Manufacture: 2004 TECHNICAL DATA Screw Diameter [mm]: 18/30 Shot Weight [g]: 17/65 Injection Pressure [bar]: 2500/2210 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420x420 Platen Size [mm]: 570x570 Minimum Mold Height [mm]: 250 CONTROL SYSTEM Controller: Selogica Hfsdpfxsvt Rwue Ai Tjn Monitor: Yes Control Cabinet: Yes Language: German OTHER DETAILS Power [kW]: 34.5 Operating Hours [h]: 61,792 Dimensions [m]: 4.6 x 1.8 Weight [kg]: 4000 CR – Core Pull R – Handling or Robot ZP – Air Valve without Hopper

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Arburg Allrounder 420C 1000-350/150 Hsdpfop Audqex Ai Tjfn Arburg Two-shot Injection Molding Machine with 100 tons clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can offer commissioning on your premises, thereby guaranteeing proper operation. Extras: Rotary table, Geiger robot, Wanner granulator. Technical Details CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR vertical / 2120 BAR horizontal INJECTION VOLUME: Horizontal: 182cm³ INJECTION VOLUME: Vertical: 54cm³ TIE BAR DISTANCE: 420x420mm MINIMUM MOLD HEIGHT: 250mm MAXIMUM DAYLIGHT BETWEEN PLATENS: 750mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002

Būklė: naudotas, Gamybos metai: 1982, Viršūnės aukštis: 220 mm Atstumas tarp viršūnių: 1250/1300 mm Apsukų skersmuo virš staklių: 440 mm Veleno skylė: Veleno tvirtinimas: Galinis kūgis: 5 MK Veleno apsukos: 11,2 - 2240 aps./min. Hsdpfx Aijvzn Ito Tefn Padavimai: išilgai/planiniai 0,1-2,8/0,05-1,4 mm/aps. Sriegio žingsniai: Elektros jungtis: 380 V, 11 kW Reikalinga vieta: 3400 x 1400 x 1300/1700 mm Svoris: apie 2700 kg

Gamybos metai: 2003, būklė: geras (naudotas), For sale is a 2-component injection molding machine of the brand Arburg, model 420 C. The machine comes from a production environment where high importance is placed on maintenance and cleanliness. Maintenance and repairs are also carried out promptly by qualified personnel. Arburg 420C 1000-150/60 Clamping force: 1000 kN Year of manufacture: 04/2003 Screw diameter: each Ø25mm installed 9 x mold heating circuits 2 x hydraulic core pulls 1 x pneumatic shut-off nozzle 9 x temperature sensors 1 x mold internal pressure sensor Currently approx. 36,684 operating hours 1 x spare cylinder Ø18mm for second unit available additionally Hsdpslwxpisfx Ai Tjfn Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine buying / selling PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, mašinos/transporto priemonės numeris: 184686, spaudimo jėga: 1 000 kN, varžto skersmuo: 25 mm, tarpas tarp stulpų: 420 mm, darbinio tūrio: 54 cm³, injekcijos svoris: 45 g, atvērimo eiga: 500 mm, Parduodama Arburg markės ir 420 C 1000-150/60 tipo liejimo mašina. Mašina techniškai tvarkinga ir labai prižiūrėta. Techniniai duomenys: Pagaminimo metai: 2001 Spaudimo jėga: 1000 kN Šviesiųjų kolonų atstumas: 420 x 420 mm Atidarymo eiga: 500 mm Įrankio montavimo aukštis: 250 mm Įrankio pritvirtinimo plokštė: 570 x 570 mm Išstūmėjo eiga: 175 mm Sraigto Ø: 25 mm Hsdpfxsx Itamj Ai Tefn Teorinė eigos apimtis: 54 cm³ Įpurškimo dalies svoris: 45 g/PS Mašina siūloma be periferinės įrangos. Sukamasis stalas, granulių tiekimo sistema, temperatūros reguliatoriai ir kita papildoma įranga neįtraukti.

Būklė: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 95 239 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 173937, spaudimo jėga: 2 000 kN, varžto skersmuo: 55 mm, tarpas tarp stulpų: 520 mm, formos aukštis (min.): 250 mm, bendras ilgis: 5 100 mm, bendras plotis: 1 800 mm, bendras aukštis: 2 200 mm, bendras svoris: 6 630 kg, Įranga: dokumentacija / vadovas, The machine was operating flawlessly up until the day before the arrival of the new machine. Therefore, it is in good used condition. The machine is being sold due to lack of space in the injection molding area and is no longer powered. The pump, injection unit, and clamping unit are all leak-free. The machine manual is available, and videos of the machine are available on request. Pump operating hours: 95,239 Automatic operating hours: 86,082 Repairs in recent years: - Filter changed annually - 05/2024: Fan in the control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/backward Hsdpfx Aiov D Nxls Tsfn - 02/2023: New keypad installed. Panel with motor and heating - 12/2022: Ejector sealed. Injection unit sealed, including new piston