įpurškimo liejimo mašina

Arburg Allrounder 470S 1300-350

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 13 450 mm, bendras plotis: 4 135 mm, bendras ilgis: 3 092 mm, keliamoji galia vienai sandėliavimo sekcijai: 400 kg, įėjimo įtampa: 400 V, keliamoji galia: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13,450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of manufacture: 2016 Total load capacity: 2 x 30,000 kg Load per tray: 400 kg (evenly distributed) Tray dimensions: 3625 x 815 mm Number of trays (approx.): 91 units Touchscreen: 15.6 inch Shuttle dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid while the system is still available Technical specifications for each Logimat: – Maximum total capacity of Schäfer Logimat: 2 x 30,000 kg – Maximum tray capacity (approx.): 91 trays, 400 kg each, evenly distributed – Tray dimensions: 3625 x 815 x 100 mm – Tray dead weight: 70 kg – Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm – System footprint (approx.): 12.8 m² – Capacity with 91 trays: approx. 269 m², each tray approx. 2.95 m² – Average tray retrieval time: 26 sec – Maximum tray retrieval time: 26 sec – Average tray exchange time: 51 sec – Maximum tray exchange time: 72 sec – Machine weight without trays: 5200 kg – Equipped with LogiTilt – Equipped with LogiPointer – Equipped with LogiGate – Equipped with LogiStainless Machines have been professionally dismantled and can be reassembled by the same technicians if required. Photos and videos of operation and dismantling available upon request by email. Price: special export price Price: excl. VAT Availability: in stock Ndoderu A Atspfx Affjd We have 3 Schäfer Logimat units in stock Machinehandel De Leeuw BV specializes in used paternoster systems, including Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Seven Arburg injection molding machines are available: 1) Arburg 320C 600-250, Year: 2001, Operating hours: 83,365h, Clamping force: 600kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, Year: 2001, Operating hours: 90,769h, Clamping force: 1000kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 750mm, Daylight between platens: 750mm, Platen dimensions X/Y: 570mm/570mm, Tie bar spacing: 420mm/420mm, Core pulls: 2, Machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, Year: 1999, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 1, Temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, Year: 2000, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 125mm/110mm, Max. opening stroke: 350mm, Daylight between platens: 350mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 1, Temperature control units: 6. 5) Arburg 220C 250-60, Year: 2001, Operating hours: 86,595h, Clamping force: 250kN, Screw diameter: 22mm, Shot weight: 27g, Max. injection pressure: 2340bar, Injection volume: 30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6. Njdpfetyyn Hsx Affedd 6) Arburg 270C 300-100, Year: 2007, Operating hours: 59,885h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, Year: 2001, Operating hours: 57,504h, Clamping force: 250kN, Screw diameter: 18mm/22mm, Shot weight: 18g/27g, Max. injection pressure: 2500bar/2340bar, Injection volume: 20cm³/30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6, Machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. Inspection on site is possible.

Gamybos metai: 2020, Sąlyga: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Njdpfeflk Awox Affodd Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe from year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings as well as the lead/feed screw bearings have been completely replaced! Ndsdpfx Afjthd Shjfsd Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible threads: Metric, Imperial, Module, Diametral-Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, removable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can carry out a complete or partial overhaul of the selected machine - Upon request, we can repaint the selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further accessories, such as safety equipment - We are happy to take care of shipping and/or installation

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, 1.0 pc used injection molding machine Manufacturer: ENGEL Model: VICTORY 200/28 TECH Year: 2007 Ndjdpfx Aeu Eu Tnsffsd Clamping force: 28 tons Tie bar distance: TIE-BAR-LESS Screw diameter: 25 mm Max. shot volume: 49 cm³ Shot weight: 44 g/PS Control system: CC200 Equipment: - 1 x core pull

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C (NEW) Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: - Machine No. 90-1495 - Centre height: 165 mm - Centre distance: 750 mm Nedpfx Afovambcjfjdd - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse taper 3 - Feed rates from 0.015 to 0.46 mm/rev - Possible threads: Metric, Imperial, Module and Diametral Pitch - Metric thread pitches from 0.18 to 28 mm - Weight approx. 1100 kg - Spindle brake engageable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: - 3-axis digital readout by K&C, new, with 12 months manufacturer warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving function, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal, - Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments - 160 mm 3-jaw chuck with two sets of jaws, NEW - Multifix quick change toolpost, size A, with 2 new tool holders - Bed stop - Electric chuck guard, NEW - LED machine lamp, NEW - Rear splash guard - Operating manual - Coolant system - Machine feet About the machine: Offered is a Weiler Condor B lead and feed screw lathe, geometrically overhauled and in as-new condition. The guideways have been reground or newly hand-scraped. Supplied with a certified inspection protocol. A very attractive machine with electronic spindle protection. The accessories — collets, chuck, and Multifix — are new. Spindles, nuts, bearings, belts, and wipers have been renewed. You are welcome to inspect this machine under power at our premises and see its condition for yourself.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Demag Ergotech - System 250/280-80 Clamping force: 25 tons Ndsdpfx Aehrw Amsffsd Screw diameter: 25 mm Year of manufacture: 2003 Sprue picker 2 units

Sąlyga: naudotas, Hohner universalus susegimo galvutė 52/8 – 6 žiedinės sąsagos – skirta apvaliai vielai Nr. 24–26 – su įvairiais priedais pagal nuotraukas. Būklė kaip nuotraukose. Ndjdpfxefc Rx Te Affed

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2021, Steuerungseinheit Marke: HAAS Hauptantrieb Spindeldrehzahlbereich: 12.000 U/min Spindelmotorleistung: 22,4 kW Anzahl der Achsen: 5 Verfahrwege X-Achse: 762 mm Y-Achse: 508 mm Z-Achse: 508 mm Ndedpfx Aewg Iaxeffsd Zusätzliche Ausstattung Kühlmitteltank – 208 Liter mit Fahrwagen Programmierbare Kühlmittelpumpe (steuerbar über M-Code) // Programmierbare Kühlmitteldüse (P-COOL) Safe Run – System zur Erkennung von Kollisionen und Überlastungen Überspannungsschutz für den Schaltschrank Modul zur Erkennung von Spannungsfehlern (EPFDM) Taste für die zweite Bezugsebene (Second Home Position) Handrad mit Fernbedienung und 2 m Kabel (RJH-XL) Schlüsselschalter zur Speicherverriegelung Drehachsenmaßstäbe Abdeckhaube oben Dieses 5-Achs-Vertikal-Bearbeitungszentrum HAAS UMC-750SS wurde 2021 gefertigt. Es verfügt über einen 22,4 kW Vector-Drive-Spindelmotor mit 12.000 U/min, einen 30+1 seitlich montierten Werkzeugwechsler und ist mit einem drahtlosen, intuitiven Messtastersystem (WIPS) ausgestattet. Nutzen Sie die Gelegenheit, dieses HAAS UMC-750SS Vertikal-Bearbeitungszentrum zu erwerben. Für weitere Informationen zu dieser Maschine kontaktieren Sie uns bitte. Einsatzbereiche Fräsen

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2007, veikimo valandos: 58 263 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 203130, varžto skersmuo: 25 mm, darbinio tūrio: 59 cm³, injekcijos svoris: 54 g, Įranga: dokumentacija / vadovas, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trade. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesale dealers for injection moulding machines for over 25 years. Manufacturer: Arburg Model: 320C 500-170 Serial Number: 203130 Year of Manufacture: 2007 Operating Hours: 58,263 h Dimensions (L/W/H): 3.12 x 1.43 x 1.99 m Weight: 2,300 kg Functionality: Fully operational Condition: Very well maintained Extras: - Interface for handling - Wear-resistant thermoplastic screw/barrel, 25 mm Control: Selogica Injection unit Screw diameter: 25 mm Shot weight: 54 g/PS Injection pressure: 2,500 bar Shot volume: 59 cm³ Clamping unit Clamping force: 50 t / 500 kN Tie bar distance: 320 x 320 mm Platen size: 446 x 446 mm Mould height min.: 200 mm Max. platen distance: 550 mm Ejector stroke/force: 125 mm / 30 kN Clamping unit: Hydraulic Motor power: 11 kW Heater power: 9.4 kW Nodpfxev U Tl Do Affsdd Total power: 21 kW The machine is available immediately from our warehouse in Hannover, Germany and has been tested. Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) in German - From first owner – origin: Germany - Regular maintenance by manufacturer and previous owner Warranty Warranty valid until first commissioning Loading/Shipping Free loading onto buyer’s truck or free delivery within Germany, shipping costs apply Available from our warehouse in Hannover, Germany Information about our machines and company: - We only sell our own machines purchased from running production, ex-stock Hannover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property - All machines offered come from successful companies where maintenance is a standard practice - All offered machines can be inspected at our warehouse