Injection Moulding Machine

Arburg ALLROUNDER CENTEX 320C 500-250 VO

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection unit: - Screw diameter: 35 mm - Shot weight: 153.8 g - Injection pressure: 2083 bar - Injection volume: 169 ccm Clamping unit: - Clamping force: 60 t - Tie bar spacing: 370x320 mm - Maximum platen size: 550x530 mm - Ejector: hydraulic - Clamping system: hydraulic Control system: UNILOG B6 Additional equipment: - Machine in very good technical condition - Euromap 67 Chedpfxek Rnq Ne Anled Dimensions: - Weight: 3100 kg - Length/Width/Height: 3.79x1.24x1.88 m Power supply: - Pump/Motor: 15 kW - Heaters: 10.4 kW - Total: 25.4 kW

Būklė: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 95 239 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 173937, spaudimo jėga: 2 000 kN, varžto skersmuo: 55 mm, tarpas tarp stulpų: 520 mm, formos aukštis (min.): 250 mm, bendras ilgis: 5 100 mm, bendras plotis: 1 800 mm, bendras aukštis: 2 200 mm, bendras svoris: 6 630 kg, Įranga: dokumentacija / vadovas, The machine was operating flawlessly up until the day before the arrival of the new machine. Therefore, it is in good used condition. The machine is being sold due to lack of space in the injection molding area and is no longer powered. The pump, injection unit, and clamping unit are all leak-free. The machine manual is available, and videos of the machine are available on request. Pump operating hours: 95,239 Automatic operating hours: 86,082 Chjdpfx Asv D Nxlonlod Repairs in recent years: - Filter changed annually - 05/2024: Fan in the control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/backward - 02/2023: New keypad installed. Panel with motor and heating - 12/2022: Ejector sealed. Injection unit sealed, including new piston

Būklė: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 2007, Funkcionalumas: neveikiantis, For sale is an injection molding machine by Netstal, model Synergy 1000-230. Due to a transport accident, the control cabinet is completely defective. For this reason, the machine is offered as a source of spare parts or for repair. The machine was fully operational and in good condition prior to the incident. Technical data: - Operating pressure: 210 bar - Injection force: 182 kN - Clamping force: 1000 kN - Opening stroke: 0–400 mm - Mold installation height: 450–750 mm - Total weight: 7,200 kg - Operating hours: approx. 53,000 Available from March 2024 Initial hydraulic oil fillings can be ordered from us. On request and for an additional fee, loading and transport (throughout Europe) can be organized. Prices plus VAT. Csdpfx Asrfbnmsnlohd Inspection possible by appointment. Contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase & sale BUYING/SELLING PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for high-quality yet affordable metalworking machinery for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1994, Nagelherstellungsmaschine Hersteller: WAFIOS Typ: N90 Baujahr: 1994 Durchmesserbereich: 2,5–3,8 mm Nagellänge: 50–90 mm Chodpfx Aeuhxqmsnled Leistung – Stück/min: 800 Die Maschine beinhaltet automatischen Drahabzug und Drahtreiniger!

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Arburg injection moulding machine from the year 2000. 130 tons clamping force. The machine is delivered fully refurbished at our facility in Heras (Cantabria). New seals have been installed in the clamping unit. We can demonstrate the machine in operation. Technical Details CLAMPING FORCE: 1300 kN PLATEN DIMENSIONS: 660 x 840 mm OPENING STROKE: 575 mm MAXIMUM DISTANCE BETWEEN PLATENS: 800/850 mm TIE BAR DISTANCE: 420 x 420 / 470 x 470 mm SCREW DIAMETER: 50 mm INJECTION VOLUME: 353 cm³ Codpfjrxtpdsx Anlshd INJECTION WEIGHT: 117 g YEAR OF MANUFACTURE: 2000 INJECTION PRESSURE: 2500 bar

Būklė: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: D02I/8335, Pasiūlymo numeris: D02I/8335 Cedpfxowm Rtzj Anlehd Mašinos tipas: Srieginė volavimo staklės vinims Gamintojas: ENKOTEC Modelis: TA01 Pagaminimo metai: 2013 Diametro diapazonas: 1,8 - 4,2 mm Kotelio ilgis po galvute: 32 - 105 mm Sriegio ilgis (min./maks.): 27 - 75 mm Galingumas vnt./min.: 2500 Vieta: Vokietijoje

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036936, spaudimo jėga: 800 kN, varžto skersmuo: 35 mm, darbinio tūrio: 135 cm³, įpurškimo slėgis: 1 837 juosta, injekcijos svoris: 123 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 820 mm, bendras svoris: 5 900 kg, šildymo galia: 8,9 kW (12,10 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 470 mm, įrankio svoris: 600 000 g, Injection moulding machines direct from the manufacturer! As manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, straightforward operation, and short delivery times. This machine is suitable for a wide range of applications, including the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to an all-electric machine concept Cjdpfx Anjuggb Dslshd – Fast delivery times through the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, year 2023) CONTROL SYSTEM  MC P1 with 15" TFT colour screen featuring multi-touch capabilities CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platens (h x v) mm 610 x 560  Minimum – Maximum mould height mm 150 – 400  Max. opening width mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forward/back kN 22 / 22  Ejector speed forward/back mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke (PS) g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticising rate (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating capacity kW 8.9  Power supply V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticising  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control hot runner shut-off 1-fold  Electrical interface for cascade control 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces for handling E18, E63  Euromap interface (central computer) E67, E77  Water manifold 4-fold  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression moulding function  Graphics analysis package  Swivelling device for injection unit The machine is located at our site in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Būklė: naudotas, Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: D12L/8393, Pasiūlymo numeris: D12L/8393 Mašinos tipas: Vielinių smeigtukų presas Gamintojas: WAFIOS Tipas: N41 Pagaminimo metai: 1987 Skersmens diapazonas: 1,8-3,4 mm Smeigtukų ilgiai: 13-80 mm Csdpfxsxnykpe Anljhd Galingumas - vnt./min: 550 Vieta: Mūsų sandėlyje

Būklė: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AN-No.: 88.04.017 D, 8 units of very clean (refurbished) Jakob Müller Frick AG weaving looms NF42 from 1988, 1989, and 1990 available from my stock. All machines are running smoothly and are 100% operational (completely overhauled). Each machine has 12 shafts, is supplied without creel, and comes with Mütrans, some also with Müdata. 1 unit NF 2/84mm from 1989 for €6,900 Stock no.: 88.04.017 D, with Müdata and Mütrans, 16 shafts 3 units NF 2/84mm overhauled from 1990, each at €6,500 Stock no.: 90.01.704 B Stock no.: 90.01.755 A Stock no.: 90.01.229 A 1 unit NF 2/84mm overhauled from 1989 for €6,500 Stock no.: 89.00.118 D 3 units NF 2/84mm overhauled from 1988, each at €6,500 Stock no.: 88.04.244 A Stock no.: 88.02.758 A Stock no.: 88.02.758 B The machines originate from a curtain tape production and were originally equipped with a Z compartment. They have been converted to standard compartments as part of the general overhaul. All tension beams and pressure rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or have been newly vulcanized. The central lubrication unit in the chain case has been optimized by us. All machines have the first shaft position free (for heavier reeds) and are fitted with 12 shafts. All machines are equipped with Mütrans II. Machines can optionally be supplied with double belt take-off (for heavy fabrics). This is possible for 4–5 machines, as far as I know. It is also possible to equip them with fine-knurled tension beams, also for 4–5 machines. All needle holders are suitable for double needles. Two additional Mütrans II systems can be fitted upon request for this purpose. The machines have been completely rebuilt. All bearings, shafts, and bushings have been checked and replaced if necessary. All swing arms have been inspected and replaced as needed. Configuration installed: Chjdpfxor Ix Igj Anlsd 1st shaft position free (spacer block fitted) 2nd and 3rd shaft: swing arm 201 4th–6th shaft: swing arm 202 7th–9th shaft: swing arm 203 10th–12th shaft: swing arm 204 13th shaft: swing arm 205 All heald springs have been checked and replaced as required, with none being brittle, cracked, or defective. The electrical installation has been checked, the thread monitoring board has been inspected and repaired or replaced as necessary. All machines are painted in RAL 6021 Müller pale green. All covers are clean and undamaged. The machines are offered without Müdata. Four of the machines are also fitted with crawl (crawler) gear. All machines have been set up and tested. The machines are delivered without oil, weft threads, slats, reeds, needles, or chain links. Delivery is on Euro pallet, FOB Wuppertal.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1998, MIG-MAG welding unit Chodpfxewx Hz Ee Anljd Adjustable welding current: 50 - 400 A Max. welding current at 45/60/100% duty cycle: 400/345/265 A Open circuit voltage: 16.5 - 45 V Standard wire feed for steel: 1.0 + 1.2 mm Wire feed speed: 1 - 20 m/min Electrical connection: 380 V Weight: 164 kg Required space: 950 x 550 x 850 mm