Al-Ko Apu 350 P - Sofort Verfügbar - pirkti naudotą (60 247)

Gamybos metai: 2009, būklė: naudotas, Offer consisting of: Alko Mobil-100 Chip extraction unit for perfect binders Iaedpfxju Srn Nj Aauer - Weight: 24 kg Upon request, we can arrange the following for you: Packaging, loading, shipping (by sea or air) including customs clearance Obtaining a leasing offer

Būklė: geras (naudotas), Construction circular saw, circular saw - Motor power: 2.6 kW Iaodpfxjd R N Ins Aaujr - Voltage: 220 Volt - Dimensions: 885/670/H810 mm - Weight: 42 kg

Būklė: naujas, tuščias svoris: 844 kg, didžiausias leistinas svoris: 2 656 kg, bendras svoris: 3 500 kg, ašių konfigūracija: 2 ašys, krovimo vietos ilgis: 3 350 mm, krovinių skyriaus plotis: 1 800 mm, krovos erdvės aukštis: 300 mm, krovinio erdvės tūris: 1,8 m³, spalva: sidabras, statybinis aukštis: 990 mm, darbinis plotis: 1 860 mm,

Būklė: naujas, tuščias svoris: 1 048 kg, didžiausias leistinas svoris: 2 452 kg, bendras svoris: 3 500 kg, ašių konfigūracija: 2 ašys, krovimo vietos ilgis: 4 050 mm, krovinių skyriaus plotis: 2 000 mm, krovos erdvės aukštis: 300 mm, krovinio erdvės tūris: 2,5 m³, spalva: sidabras, statybinis aukštis: 990 mm, darbinis plotis: 2 060 mm,

Būklė: naujas, Technical specifications: Max. air flow rate in m³/h: 6,800 Max. negative pressure in Pa: 500 Rated motor power: 0.75 / 2.1 kW Ex (suitable for installation in Zone 2 according to ATEX) Filter area in m²: 2 Dimensions (W x D x H) in mm: 2,971 x 1,405 x 1,131 Connection diameter: 300 mm Iajdpfxovwfm So Aauer Switch: 2-stage 5 m cable with plug and throttle valve

Būklė: naudotas, Dimensions (length/width/height): 1400/2000 x 1400 x 3000 mm Connection diameter: 2x 220 / 1x 180 mm with 14 suction nozzles pneumatic slide valve control fan discharge negative pressure system in compact design with 12 built-in automatic slide valves used, in good condition Brand: ALKO Type: FU-2-12-800-70-III-A No.: 910225 Length: 1400 / 2000 mm Width: 1400 mm Height: 3000 mm 12 x suction nozzles Ø 180 mm with slide valves 2 x suction nozzles Ø 220 mm without slide valves Cladding Shaking system with discharge via fan Iaedpfx Aovwfu Asaujr complete control system air recirculation/extraction duct approx. Ø 500 mm with 2 fans 0.9 + 3.0 kW each - pole-changeable motors 1450 / 2800 rpm Location: 97447 Gerolzhofen Handover as is, free loaded without warranty or guarantee

Būklė: naudotas, Filter top section Intermediate filter / blow-through filter Vacuum unit suitable for container feeding used, in good condition, Iaedevxa N Dopfx Aaujr Make: ALKO Length: 1400 mm Width: 1400 mm Height: 3000 mm Suction/intake nozzles: Ø 2 x 250 mm Enclosure with discharge / fan approx. 2.0 kW, Ø 160 mm Air recirculation possible with 2 fans 2 x 2.0 kW Diameter: Ø 250 mm Location: 97447 Gerolzhofen Hand-over as seen, in current condition - free loading -

Būklė: naujas, - NEW - - Compact design, space-saving Iedpov Svc Hefx Aaujar - Powerful, high suction capacity, low operating costs - Easy maintenance, long filter service life - Versatile use, variable accessories - High flexibility - Mobile design - Extraction technology with front panel system - Mobile/portable Technical data: - Inlet nozzle: 2000x1000 mm - Motor rated power: 2.2 kW, 4.6 A, 3-phase, 400V/50 Hz, 1430 rpm - Airflow volume: 6800 m³/h - Usable negative pressure: 500 Pa - Filter area: 2.0 m² - Filter cleaning: none - Filter material: green (1 piece) - Filter load: 3400 m³/m²/h - Residual dust content: Max. separation efficiency approx. 97% - Control automation: none - Electrical connections: 2-stage switch, plus 5 m connection cable with protective contact plug, 1-pole, external fuse 10A required - Compressed air supply: none - Max. sound pressure level: 72 dB(A) + measurement uncertainty 4 dB DIN EN ISO 11201 free-field measurement - Undercarriage: 4 swivel castors with thermal coating, D=75 mm - Dimensions (W/H/D) mm: 1912x1405x946 (2969x1405x1218) - Weight (approx.): 248 kg . 195 752 02

Būklė: geras (naudotas), Drawbar, coupling bar, overrun brake - Height-adjustable drawbar - Cranked design Iasdognna Hepfx Aauer - Equipped with overrun brake - Support load: 100 kg - Permissible total weight: 1000 kg - Quantity: 12 drawbars available - Price: per unit - Net weight: 40 kg

Būklė: geras (naudotas), Drawbar, hitch, overrun brake - Height-adjustable drawbar Iaedpsgnnbgefx Aauer - Cranked design - With overrun brake - Support load: 100 kg - Permissible total weight: 1600 kg - Quantity: 14 drawbars available - Price: per unit - Dead weight: 65 kg

Būklė: naudotas, Gamybos metai: 2001, iš valdžios institucijos naudotas, puikios būklės, mažai naudotas Gamintojas: AL-KO Modelis: Mobil Jet 100 Pagaminimo metai: 2001 Mašinos Nr.: 2433306444 Švaraus oro įrenginys / neigiamas slėgis GS dulkių sertifikuotas CE tipo sertifikatas Variklis: 1,5 kW Prijungimo skersmuo: 100 mm Slėgis: 1572 Pa Oro našumas: 770 m³/val. 1 surinkimo statinė 50 cm Filtro valymas rankinis Filtro slėgio stebėjimas Naujos įrangos kaina apie 3.600,00 EUR Vietos poreikis apie 1200 x 1700 x 2000 mm Svoris apie 120 kg Sandėliavimo vieta: 97447 Gerolzhofen, laisvai pakraunama, be pakuotės Perdavimas esamos būklės, kaip apžiūrėta, Iaedpsyclxvofx Aausr be garantijos ir atsakomybės.

Gamybos metai: 2019, būklė: beveik kaip naujas (naudotas), mašinos/transporto priemonės numeris: AT4-F 32x16/32x16 - wetterfest, Įranga: aušinimo blokas, AL-KO vėdinimo įrenginys Iodpfx Aaoxvdi Sjuear

Būklė: naujas, Gamybos metai: 2026, Product Details Crosscut and Mitre Circular Saws Model ZS 200NF Iasdpfx Aaocnz Rveusr Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust cast iron construction Precision linear ball bearing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Re-adjustable fixed stops Lower saw blade guard can be connected to dust extraction Machine mounted on a mobile machine base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2,800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: Ex stock 54634 Bitburg - Immediately available - Upon request, we are happy to offer you the saw blade as well.

Būklė: naujas, Gamybos metai: 2026, CASADEI Libra 35 – Wide Belt Sander, Two-Belt Version Immediately available – Ex stock 54634 Bitburg Technical Data Sanding width: 1100 mm Min. / max. working height: 4 / 170 mm Abrasive belt width: 1115 mm Abrasive belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table adjustment motor power: 0.25 kW Main drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Height: 1960 mm Photo shows optional equipment. Wide belt sander in two-belt version for widths up to 1100 mm, featuring a range of options suitable for cost-conscious workshops. Robust, tube-reinforced monoblock steel machine frame with high-mounted working units for maximum rigidity. User-friendly controls with clearly arranged front control panel. Motorized table height adjustment. Digital display for working height. Electronically regulated belt oscillation with reduced compressed air consumption. Automatic star-delta starting for the main motor. Natural rubber feed belt with negative profile. Feed table fitted with two rollers at the infeed and outfeed ends of the feed belt. Feed belt driven by gear motor, selectable between two speeds. Flexible steel pressure bar in front of the first unit. Rubber pressure rollers in front of and behind each working unit. Pneumatic belt tensioning per unit, with decimal correction for grit / belt thickness. Quality – Made in Europe. RTC Version 1st unit: diagonally grooved steel roller, Ø 120 mm, with fine adjustment for calibration. 2nd unit: combination unit with fine-adjustable working height for calibration and finish sanding, featuring a rubber-coated roller (Ø 120 mm, 45 Sh) and a hard sanding shoe with graphite lining on interchangeable insert. Scope of delivery: Table height adjustment with electronic height display Belt oscillation with electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-return feature (C.E.) Star-delta starting for the main motors Grooved calibration steel roller Selector switch for sanding shoe positioning from control panel Accessories: – Semi-hard flat sanding shoe – Automatic belt centering Isdpfecr S Ecsx Aauear Location: Ex stock Bitburg – Special price

Būklė: naujas, Gamybos metai: 2026, Cut-Off and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, Saw tiltable via handwheel and worm gear (back side) Saw blade diameter: 520 mm, saw blade bore: 50 mm Blade speed: 2800 rpm 400 volts / 5 kW (S6/40%) motor with brake and automatic star-delta switch g Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees (swiveled): 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm Saw can swivel to one side to approx. 25 degrees for acute angles and tilt left up to 30 degrees for flat angles Ijdpfx Ask H Ic Uoausar TCT circular saw blade 520x4.0/2.8x50 mm 60 teeth WZ neg. for wood RLH-ST60 6.0 meter measuring length, mounting side: left Length stop / roller conveyor, heavy-duty design, Stop slider adjustable from operator position via handwheel, electronic-digital measurement display, stop slider pneumatically clamped, flip-away stop flap to the rear, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 m Surcharge for digital electronic display unit Type: FIAMA EP6 for 230 V mains operation, with electrical on/off switch and socket. Powerful dark red LED display. Higher accuracy compared to battery-powered crystal display RO-ST60 4.0 meter infeed roller conveyor Mounting side: right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm, 400 mm roller width, 3 support feet and connection piece Location: Ex stock 54634 Bitburg - immediately available - Image: similar. Machine is still in its original packaging

Gamybos metai: 2022, būklė: beveik kaip naujas (parodų įrenginys), AL-KO Grinding Table AST 1.5 BASIC The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the seal “Wood Dust Tested according to BGI 739-1”. YOUR BENEFITS - Accessible from 4 sides - Load capacity up to 150 kg - Manual, tool-free height adjustment with scale - Offset longitudinal sides for edge sanding - Workpiece-friendly beech wood grate (removable) - Funnel-shaped airflow to extraction nozzle Iasdpfx Ajdqzhbsaujr TECHNICAL DATA AST 1.5 BASIC Extraction nozzle: 140 / 160 mm Required extraction capacity: 1,500 m³/h Negative pressure at nozzle at 22 m/s: - 1,000 Pa at DN140 mm - 700 Pa at DN160 mm Adjustable working height: 735-1,015 mm Work surface (W x L): 946 x 1,500 mm Dimensions (W x L): 1,000 x 1,600 mm Weight: approx. 73 kg

Būklė: naujas, Gamybos metai: 2024, Advantages - Compact design, space-saving - Powerful, high extraction capacity, low operating costs - Easy maintenance, long filter service life - Universally applicable, variable accessories - High flexibility - Mobile construction - Extraction technology with front sheet system Iodobpg E Eopfx Aaujar Technical Data: Motor rated power: 0.75 kW / 2.1 kW Motor speed: 960 / 1430 rpm Air volume: 6,800 m³/h Filter area: 2 m² (2 x 1 m) Connection diameter: 300 mm with throttle valve Dimensions (W / H / D) in mm: 2971 x 1405 x 1215 Weight: 248 kg

Būklė: naujas, Gamybos metai: 2025, Paint mist extraction unit AL-KO Colour Jet 1 Paint mist extraction unit, ready for operation, 1 sqm filter area with pre-filter and fine filter, connection diameter 300 mm, 1.5 kW ex-rated motor (suitable for installation in Zone 22 according to ATEX), single-stage switch + 5 m cable with plug and throttle valve. • Compact, space-saving sheet steel construction • Chassis with wheels Iodpfxjbumr Ss Aauear • Indirect extraction near the floor • Completely pre-assembled • With connection cable and phase reverser • Adjustable side panels • Optimized spray mist capture thanks to patented front panel hood • Long filter service life • High-performance fans with low noise level • Filter wall with special mats • Exhaust nozzle with integrated throttle valve Motor power: 1.5 kW Speed: 1400 rpm Nominal airflow: 4600 m³/h Pressure: 500 Pa Dimensions (W*H*D): 1025*1437*1214 mm (Width 2000 mm with side panels) Filter area: 1 m² Weight: 175 kg

Būklė: naujas, Gamybos metai: 2025, Edge sanding machine with overlying feed unit What distinguishes the Uniq-S from the Uniq is its feed system, which is integrated into the machine table and features a rubberized feed belt and an overhead pressure beam. This design significantly facilitates the sanding and machining of slanted and beveled edges, as well as the serial sanding of workpieces. It also assists when processing exceptionally large or small parts. The feed speed is infinitely adjustable between 3 and 15 m/min. A soft conveyor belt underneath and rubberized rollers on the overhead pressure beam gently convey the material. An optional second, lower conveyor belt is available. The upper pressure rollers can also be replaced with a rubber belt, which is particularly helpful when sanding extremely small parts. Iajdpfx Ashqb Rcjausr The Uniq-S is recommended as an all-round solution capable of performing all operations – from solid wood to fine veneer edges – with high quality. The infinitely variable feed speed ensures optimum adjustment to the material. 1. Sanding station: “Veneer side” 2. Sanding station: “Solid wood side” 3. Sanding station: “Auxiliary table” 4. Sanding station: “Half-round table” Location: In stock 54634 Bitburg - immediately available -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Compact wide belt sander with combination sanding unit Special action equipment: - On/off control of the sanding pad from the operator panel - On/off control of the roller from the operator panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with pushbutton Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front Robust mono-block steel machine body with tubular reinforcement, robot-welded, aggregates mounted high for maximum rigidity Motor-driven height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail in front of the first aggregate Rubber pressure rollers, in front of and behind each sanding unit Pneumatic belt tensioning for each unit with decimal adjustment for grit/belt thickness Universally usable for solid wood and veneer, thanks to the combination unit Entry-level model for small businesses Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite insert Universal design for calibration and sanding of solid wood, particleboard, and veneer Technical data Product length approx.: 1388 mm Product height approx.: 1668 mm Product width/depth approx.: 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V Current type: AC Phase(s): 3Ph Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW Height adjustment motor power: 0.25 kW Drive motor power: 7.5kW Sanding unit Sanding belt length: 1525 mm Maximum sanding width: 950 mm Ijdpfxsgf Sw Ns Aaujar Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Workpiece height min.: 4 mm Workpiece height max.: 170 mm

Būklė: naujas, Gamybos metai: 2024, Description High-quality housing made of galvanized steel Powerful, economical motors Standard selectable inlet port at the top or bottom Uniform filter bags for all variants Discharge into chip bins The modular models of the AL-KO AAS series are available in optimally matched performance categories, featuring energy-saving and quiet motors that drive the raw air-side fan, thereby creating particularly effective positive-pressure filtration. Durable quality components and a complete metal housing made of galvanized sheet steel offer you investment security, as do the wide range of retrofit options. The exceptionally attractive price and short installation times also contribute to making the AL-KO AAS the right choice with certainty. Technical Data AL-KO AAS 3013 Inlet port: 200 mm Ijdpfx Aefc A Ureausar Nominal capacity: 2,500 m³/h Maximum airflow: 3,300 m³/h Maximum pressure: 2,700 Pa Filter area: 3 x 2.2 m² Chip collection volume: 3 x 175 liters Motor power: 3.0 kW / 400 V Dimensions (L x W x H): 2,486 x 578 x 2,115 mm Weight: 139 kg

Būklė: naujas, Efficient Extraction of Coolant and Lubricant Mist Directly at the Machine Tool The two standard units, AL-KO OIL JET 600 and OIL JET 1200, are the ideal solution for direct extraction of oil and emulsion mist at all common turning, grinding, and milling machines. Fields of Application: AL-KO OIL JET units are used wherever oil and emulsion mist generated during machining processes on modern metalworking machines need to be directly extracted from the machining chamber. Depending on the size of the machining chamber, operating time, and the type of coolant used, either the OIL JET 600 model or the more powerful OIL JET 1200 model is deployed. AL-KO OIL JET units are suitable for all conventional cooling and lubricating agents and are either mounted directly onto the machine tool or installed beside it on an optional support column. Functionality: The highly effective AL-KO OIL JET filtration system features three standard filter stages, which purify the extracted air from emulsified oil and particulate matter: 1. First Filter Stage: Washable metal mesh filter 2. Second Filter Stage: Filter mat (LoTex®) with frame 3. Third Filter Stage: Main filter cassette (ePM1 80%) The first filter removes coarse particulates. The second stage consists of a drained, nano-coated mat, which separates and channels off emulsified liquids. The third filter stage captures the finest residual particles. Emulsions, primarily separated in the second stage, are collected in the base of the unit and can be drained off. Applications: - Lathes - Machine tools - Chip-removing machines Iaodpfowwt Tlox Aauor Advantages: - Compact design - High separation efficiency due to 3-stage filtration system - Energy efficient EC motors - Simple, tool-free filter replacement - Numerous options

Būklė: naujas, Įranga: dulkių šalinimas, For all industrial processes where dust and coarse particles are released, the AL-KO CLEAN UNIT D series clean air dedusters are the right choice. Thanks to their powerful fans and highly efficient filter cartridges, these mobile extraction systems ensure clean air not only in metalworking but also in the plastics, food, and chemical industries. Functionality: Dust and coarse particles are extracted directly at the machine or via collection hoods and transported through a suction line to the connection port of the AL-KO CLEAN UNIT D. In a generously sized pre-separation chamber, coarse particles are separated out. The subsequently arranged filter cartridges of dust class "M" then filter out the remaining fine dust. The differential-pressure-controlled filter cleaning system removes adhering particles from the filter cartridges even during suction operation. Venturi nozzles on the filter cartridges increase the cleaning effect, ensuring consistent suction power and a long filter service life. The separated dust is collected in an easily mobile container fitted with a collection bag for low-dust disposal. The purified air is then returned to the room via the top of the unit. Applications: - Direct extraction of dust and chips - Suitable for single or multi-point extraction - Can be connected to machines, extraction tables, booths, and ductwork - For metalworking, plastics processing, and many other industries - For use during grinding, polishing, filling processes, and more Advantages: Iedjwwkrfopfx Aauear - High suction capacity thanks to an efficient fan and cleanable filters with long service life - Suitable for a wide range of applications - Extremely quiet due to highly effective sound insulation - IE3 motors for high energy efficiency - Plug-and-play

Būklė: naujas, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in diverse manufacturing sectors and industries, including larger processing machines. Eligible for BAFA subsidies according to Module 4. ECO JET series systems are equipped with clean-air side fans which draw dust- and chip-laden air to the filter unit. For the most powerful DUO models, two fans are connected in parallel. A flange at the filter unit inlet allows for the connection of customised duct diameters. The airflow within the separator chamber is aerodynamically optimised so that coarse particles are directly separated before reaching the filter bags. Remaining dust collected by the filters is automatically cleaned off by the AL-KO OPTI JET® filter cleaning system; the separated material is discharged into mobile collection bins located below the filter. Iedewwtuijpfx Aauear Applications: - Extraction at production machines, machining centres, and ductwork systems with multiple extraction points - Direct extraction in continuous operation - Suitable for industries such as woodworking, joineries, carpentries, furniture production, plastics manufacturing and processing, paper production, orthopaedic industry, and many more Advantages: - Comprehensive range of standard extraction units with numerous customer-specific adaptations and options - Consistently high suction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings as 100% recirculating operation is possible in many cases - Minimal space requirement due to compact design - Suitable for indoor and outdoor installation - Available in ATEX-compliant versions - Extensive accessories and a wide range of options for customised system configuration - Eligible for BAFA subsidies according to Module 4

Būklė: naujas, Wet paints contain, in addition to pigments and additives, other hazardous components that must be mandatorily extracted. AL‑KO COLOUR JET extraction units are the ideal solution here and—with four output levels—always provide ample reserves. The COLOUR JET series units are optimally designed for extracting paint mist and solvents at wet painting workstations. The front baffle plate ensures effective capture at the bottom and lateral intakes, as solvents in paints sink and accumulate near the floor. At the same time, the baffle plate facilitates even air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated by a large-area replaceable filter, and the cleaned exhaust air is then directed outdoors via a pipe or hose system. Iaodpfx Aswv T R Ueauer Applications: - Wet painting workstations in craft, industry, and workshops - Painting stations within ATEX Zone 2 Advantages: - Clean and safe painting workstations thanks to high extraction performance and an efficient filtration system - Flexibility due to mobile design - Cost-effective and powerful, often replaces an enclosed spray booth - Safety assured through certification for use in potentially explosive atmospheres (ATEX Zone 2) - Customizable with a wide range of accessories