Helpo 2Cb2 pirkti naudotą (277)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1996, Compair Cyclon 6000N Screw Compressor 75kW Power: 75 kW Free Air Delivery: 12.9 m³/min Volume flow: 774 m³/h Pressure: 8 bar Voltage: 400 V, 50 Hz, 3-phase Year of manufacture: 1996 Operating hours: 51,000 h Weight: 1,800 kg Dimensions: Length: 2,100 mm Width: 1,700 mm Height: 1,510 mm If you require further information, we are here to help! Hedpfxjh Unhno Ab Rsnt Please contact us using the contact form or give us a call. Your listing was translated automatically. Translation errors may occur.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995, FLUIDPROGRESS mobile hydraulic power unit 1.6 dm³/min 160 bar Type: 25TE1.6 160/JD 24V Year of manufacture: approx. 1995 Rated operating pressure: 120 bar Three-part system. Operating pressure: max. 160 bar Flow rate: approx. 1.6 dm³/min. Tank capacity: 200 litres Motor power: 0.75 kW Power supply: 380 Volt, 50 Hz Electric hydraulic valve ATOS ORSTA Hydraulics Required space: Length: 1020 mm, Width: 610 mm, Height: 1000 mm Net weight: approx. 250 kg If you require further information, we are here to help! Please contact us via the contact form or call us. Hjdji Dnpxspfx Ab Rent Your listing has been automatically translated. Translation errors are possible.

Gamybos metai: 2007, būklė: beveik kaip naujas (parodų įrenginys), The new industrial gas burner Cuenod C 120/160 GX507 is available for sale. Performance control operates smoothly in two stages; modulating. Used fuel gas: G20 Maximum output: 1600 kW Minimum output: 230 kW Burner diameter: 227 mm Dungs mb-vef 407 b01 s30 combustion controller Fan motor output: 2.4 kW Voltage: 230 / 400V 2kW 50Hz IP47 GAS pressure: min. 20 mbar / max. 360 mbar Weight: 109 kg Year of manufacture: 2007 The CUENOD gas burner features innovative technology designed to ensure a stable gas/air mixture and low emissions. Hodpfxed Aqqzj Ab Rent • The specially developed burner head keeps NOx emissions below 80 mg/kWh. • Very low noise level (enclosed ventilation system). • Ventilation with the RHP® system for optimizing the combustion process. • Cubic design with cross-flow fan. • Shunt for measuring ionization current. • AGP® system provides optimal air-gas ratio, controls CO2 emissions during operation, and offers precise regulation of excess air flow, making it ideal for high-efficiency condensing boilers at maximum efficiency. Net price for commercial EU customers. If you need further information, we are here to help! Please contact us via the contact form or call us. Your listing has been automatically translated. Translation errors may occur.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1998, bedo Carton Erector Type VA 988 with Nordson 3400 Hot Melt Year of manufacture: 1997 Machine No.: VA 988.1.52490, Serial No.: 4705 Performance: 20 cartons/min with automatic format changeover. Format range: L 200 – 650 mm W 150 – 460 mm H 100 – 500 mm. Carton discharge height: 600 mm Electrical data: Voltage: 400 V, 3 phases Frequency: 50 Hz Connected load: 7.3 kVA, 18 amps Operating pressure: 5-7 bar Machine is equipped with a Siemens S5 PLC control system. Hedsifkbxopfx Ab Rsnt Machine weight: 1,500 kg Machine dimensions: Length: 3,000 mm Depth incl. carton magazine: 2,100 mm Height: 2,100 mm Machine weight: 1,500 kg Base flap closure with Nordson 3400 hot melt unit. If you need further information, we are here to help! Please contact us via the contact form or call us. Your listing has been automatically translated. Translation errors may occur.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, veleno tvirtinimas: MK 4, bendras svoris: 2 500 kg, gręžimo pajėgumas: 40 mm, veleno greitis (maks.): 1 655 aps./min, Radial drilling machine OOYA RE 1000 for sale in excellent condition Hnjdpfxowvufgo Ab Rst Manufacturer: OOYA Machinery Works Co. Ltd Model: RE-1000A Speed range: 50% (12 steps), 32–1655 rpm (50 Hz) Arm reach: 1000 mm Spindle taper: MT 4 Drilling capacity in steel (diameter): 35 mm Drilling capacity in cast iron (diameter): 40 mm Vertical arm travel: 650 mm Spindle diameter: 60 mm Column diameter: 320 mm Clamping table: 1020 x 650 mm Clamping block: approx. 450 x 650 x 500 mm Spindle diameter: 60 mm Column diameter: 320 mm Power supply: 3 x 200 V 50 Hz (Japanese voltage standard) Main drive motor: 2.2 kW Arm lift motor: 1 kW Coolant pump motor: 50 W Weight: 2.5 t Space required approx. 2.1 x 1.16 x 3 m Need more information? We are happy to help! Contact us via the contact form or call us. Your listing was translated automatically. Translation errors may be possible.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, TOYOSK 01C 550II-TMS Multi-Spindle Drilling Machine with Fixed Spindle and 48 Spindles Manufacturer: TOYOSK Model: 01C 550II-TMS Minimum spindle diameter: M4x8 Maximum spindle diameter: M4x15 Table size: 280x360mm Spindle speeds: 430, 710, 1030 Hedpfx Abjwcp Ens Rent Power: 1.5 kW Application: Simultaneous drilling of multiple holes for precise mass production tasks (e.g. automotive parts, sheet metal, castings) If you need more information, we are here to help! Please contact us via the contact form or give us a call Your listing was automatically translated. Translation errors may be possible.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, bendras svoris: 100 kg, bendras aukštis: 1 000 mm, spalva: raudona, nuolatinis darbinis slėgis: 210 juosta, veleno sukimo momentas (maks.): 1 800 Nm, Įranga: hidraulika, Cone Splitter / Excavator Wood Splitter / Drill Cone Splitter / Log Splitter KS5 Drill Cone 200x400 – Made in Germany The powerful cone splitter for attachment to mini excavators, excavators, wheel loaders, tractors, forestry trailers, and many other applications. The drill cone can be swapped out for various tools such as a root grinder, earth auger, humus sieve, concrete mixing drum, weed brush, and many other attachments. The cone splitter consists of a very robust drive unit and the drill cone (splitting cone). The drill cone is fully hardened—not made from unhardened steel like many competitors. The device can be converted to other attachments in just a few steps. • Cone splitter • Root grinder • Earth auger • Weed brush • Sweeper • Power harrow NOT CHINESE IMPORTS! WE MANUFACTURE IN GERMANY! The ideal multipurpose tool for forestry professionals, farmers, landscapers, DIY enthusiasts, and professionals. Total length: 600 mm plus attachment and quick-change system Universally usable in construction, forestry, agriculture, and landscaping For splitting large firewood or timber for wood chips For drilling earth holes for posts, plants, and much more For removing root stocks and tree stumps For cleaning ditches and paved surfaces For leveling garden areas and creating a fine soil structure Get the job done easily from the excavator without extra help. The very solid and stable steel construction enables tough and durable operation. The shaft is mounted not just on the motor but also with two heavy-duty tapered roller bearings to absorb both thrust and tension. The tapered roller bearings are greaseable for long service life. A powerful HMT 500 hydraulic motor provides up to 1,800 Nm torque for efficient performance, with a flow rate from 25 l/min up to 125 l/min at 210 bar pressure Weight: 70 kg Includes: • Drive unit with powerful HMT hydraulic motor, weight 70 kg • Drill cone with tip: Ø 200 mm, 270 mm/400 mm long, face side with 6xM16 threads, PCD173 Total length: 270 mm + drill cone tip 130 mm = 400 mm Hnjdpfx Asuph Uxjb Ret Diameter: 200 mm Weight: 30 kg Total weight: 100 kg

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, valdiklių gamintojas: Amada, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: hidraulinis, MYYDÄÄN: Amada HPF 100-3 CNC-hydraulinen särmäyspuristin Amada HPF 100-3 – Luotettava CNC-särmäyspuristin raskaisiin levytyötöihin Tarjolla käytetty Amada HPF 100-3 CNC-hydraulinen särmäyspuristin [hyvässä / täysin toimintakunnossa]. Tämä on hyvin tunnettu kone eräältä maailman johtavilta levytyöstökoneiden valmistajilta ja sopii monipuolisiin teollisiin taivutussovelluksiin. Keskeiset tekniset tiedot: Puristusvoima: 100 tonnia (1 000 kN) Maksimi taivutuspituus: 3 100 mm Rungon väli: 2 700 mm Iskun pituus: 200 mm Kurkun syvyys: 420 mm Hnedjy Hf Tpepfx Ab Rot Avautumiskorkeus: 470 mm CNC-ohjaus: Amada Operateur / OP 2000 Akselien määrä: 7 (Y1, Y2, X, R, Z1, Z2 + bombeeraus) Moottoriteho: 9–11 kW Koneen paino: noin 6 750 kg Koneen tiedot: Valmistusvuosi: 2002 Kunto: Hyvä! Työkalut mukana Miksi tämä kone? Amada HPF 100-3 on vankka ja tarkka hydraulinen särmäyspuristin, joka on suunniteltu suurivolyymiseen tuotantoon. Amadan CNC-ohjausjärjestelmä mahdollistaa taivutussarjojen helpon ohjelmoinnin ja tallennuksen, joten kone soveltuu sekä sarja- että toistotuotantoon. 3 100 mm:n taivutuspituus ja 100 tonnin kapasiteetti kattavat valtaosan teollisuuden levynmuovauksen tarpeista.

Būklė: naujas, Gamybos metai: 2025, Ref. No.: 10465 Manufacturer: IGREK Model: FR 1000 T Year of manufacture: 2025 Control type: CNC control Control system: Siemens / Heidenhain Warehouse location: Istanbul Country of origin: Türkiye X-axis travel: 1,350 mm Y-axis travel: 1,500 mm Z-axis travel: 900 mm B-axis: ° C-axis: 360 ° Spindle taper: HSK-T100 Rotary table diameter: 1,000 mm Table load capacity: 2,000 kg Tool magazine with: 48 pcs. Spindle speed: 15,000 rpm Rapid traverse X/Y/Z: 48 m/min Spindle motor power: 35 kW Max. spindle torque: 220 Nm Machine length: 3,200 mm Machine width: 6,400 mm Machine height: 4,050 mm Machine weight approx.: 40 t Additional Information: IGREK FR 1000 T – Compact Precision for Demanding Applications The IGREK FR 1000 T is a CNC-controlled turning and milling centre featuring 5-axis simultaneous machining, combining state-of-the-art technology within a compact design. Manufactured in 2024, this machine is immediately available and ideally suited for the precise machining of medium-sized workpieces across a range of industries. Key Features: Compact Performance: Travel paths of 1,350 mm (X), 1,500 mm (Y), and 900 mm (Z), plus a table load capacity of up to 2,000 kg, provide optimal conditions for flexible applications. 5-Axis Simultaneous Machining: The B-axis (° / °) and C-axis (360°) enable precise processing of even highly complex geometries. High-Performance Spindle: The spindle delivers speeds up to 15,000 rpm, maximum torque of 220 Nm, and drives at 35 kW—ideal for demanding milling operations. Enhanced Capacity: A tool magazine with 48 positions and HSK-T100 interface allow for rapid tool changes and efficient workflows. Excellent Speed: Rapid traverse rates of 48 m/min in all axes help to minimize machining times. Technical Specifications at a Glance: Travel paths: X 1,350 mm / Y 1,500 mm / Z 900 mm Rotary table diameter: 1,000 mm Max. table load: 2,000 kg Spindle power: 35 kW Spindle speed: up to 15,000 rpm Machine dimensions (LxWxH): 3,200 x 6,400 x 4,050 mm Weight: approx. 40 tonnes Additional Advantages: Thanks to advanced control systems (Siemens or Heidenhain) and a robust machine design, the IGREK FR 1000 T is suitable for both single-part and series production. The manufacturer offers international service and comprehensive warranty coverage. Hodpfx Abexmd S Io Ront Discover the IGREK FR 1000 T as your reliable partner for precise and efficient manufacturing—available from stock now. Contact us for further information!

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, rida: 8 km, kuro tipas: dyzelinas, Gamybos metai: 2024, Įranga: hidraulika, oro kondicionavimas, We offer a brand-new Zoomlion ZS090V skid steer loader with an operating weight of 3 tons. The machine is available immediately and is ideal for loading, transport, landscaping, as well as road and construction works. - Year of manufacture: 2024 - Equipped with a robust and economical Kubota V2403-CR-T engine meeting current emission standards - The cab provides operator comfort with air conditioning, an ergonomic seat, excellent visibility, and a rear-view camera - Features a hydrostatic drive and a precise hydraulic system ensuring smooth attachment operation and rapid response - Rated operating capacity: 901 kg - 0.5 m³ bucket available at an additional cost - The machine is highly maneuverable, stable, and ready for intensive work in a variety of terrain conditions - Covered by manufacturer’s warranty - VAT invoice provided - Immediate availability – personal collection in Kolbudy or nationwide delivery possible - Assistance with arranging sea transport from any port in Europe - Additional attachments are available separately – we offer a wide range of accessories to tailor the machine to your specific application. Financing available: We offer purchase options via leasing or credit. We assist in selecting the most beneficial financing solution and handle all formalities. We cooperate with reputable financial institutions: Deutsche Leasing S.A/ MLeasing Sp. z o.o./ Siemens Finance Sp. z o.o./ Pekao Leasing Sp. z o.o. /PKO Leasing S.A /PEAC Poland Sp. z o.o. /Nest Lease S.A / Alior Leasing Sp. z o.o. Financing conditions: - Simplified procedures available up to PLN 1 million - Down payment: from 0% to 45% - Financing period: up to 96 months - Currency: PLN or EUR Hnodpfx Abjxwd Hyo Rst Contact us by phone or email. I am happy to provide additional information and help select the right attachments. This announcement does not constitute a commercial offer within the meaning of Article 66 §1 of the Polish Civil Code.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, rida: 10 km, pavaros tipas: hidrostatinis, kuro tipas: dyzelinas, bendras svoris: 21 000 kg, tuščias svoris: 21 000 kg, Gamybos metai: 2025, veikimo valandos: 10 h, I am offering a brand new Zoomlion ZE210GLC crawler excavator with an operating weight of 21 tons. The machine is available immediately and is perfectly suited for large-scale earthworks, road construction, building projects, and industrial applications. - Year of manufacture: 2025 - Equipped with a Cummins B6.7 engine delivering 129 kW, ensuring high performance, reliability, and compliance with current emission standards - Spacious, comfortable operator cabin featuring air conditioning, ergonomic seat, rear-view camera, and ROPS/FOPS safety systems for enhanced protection - Variable displacement piston pump with swash plate, providing a maximum flow of 2 × 220 liters per minute. The machine comes with a factory quick coupler and a complete hydraulic installation for auxiliary attachments such as hydraulic breakers, grabs, or shears - Maximum digging depth: approximately 6.7 meters - The machine is stable, robust, and ready for heavy-duty work in challenging terrain conditions - Covered by manufacturer’s warranty Hsdpoxwd Evjfx Ab Ront - VAT invoice issued - Additional attachments available separately – wide selection of accessories to tailor the machine to specific tasks - Immediate availability; personal collection in Kolbudy or delivery within Poland possible - Delivery to a selected port and assistance with international logistics Financing options available: We offer purchase via leasing or loan. We assist in selecting the optimal option and handle the formalities. We cooperate with reputable financial institutions: Deutsche Leasing S.A/ MLeasing Sp. z o.o./ Siemens Finance Sp. z o.o./ Pekao Leasing Sp. z o.o./ PKO Leasing S.A / PEAC Poland Sp. z o.o. / Nest Lease S.A / Alior Leasing Sp. z o.o. Financing conditions: - Simplified procedures up to PLN 1 million - Own contribution: from 0% to 45% - Financing period: up to 96 months - Available in PLN or EUR Call or write. I am happy to provide further information and help select attachments suited to your needs. This advertisement does not constitute a commercial offer within the meaning of Art. 66 §1 of the Polish Civil Code.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, rida: 5 km, kuro tipas: dyzelinas, spalva: žalia, bendras svoris: 5 500 kg, tuščias svoris: 5 500 kg, Gamybos metai: 2025, veikimo valandos: 5 h, Įranga: borto kompiuteris, galinis surinkėjas, guminės vikšrinės juostos, hidraulika, kabina, oro kondicionavimas, papildomi žibintai, žemas triukšmo lygis, I am offering a brand new Zoomlion ZE55GU crawler excavator with an operating weight of 5.5 tons. The machine is available immediately and is ideal for earthmoving, roadwork, landscaping, and construction applications. - Year of manufacture: 2025 - Kubota V2607 engine – powerful, fuel-efficient, and compliant with emission standards - Cab equipped with air conditioning, ergonomic seat, panoramic visibility, and rear-view camera - Variable displacement piston pumps with swash plate; Maximum flow: 154.8 l/min - Digging depth: over 3.8 m - Quick coupler included - Buckets sold separately – so you can select exactly the types you need - Option to mount a hydraulic breaker - The machine is agile, efficient, and ready for operation - Manufacturer’s warranty. VAT invoice available - Immediate availability – collection possible in Kolbudy or delivery within Poland - Assistance with organizing sea transport from any European port - Additional attachments available separately – we offer a wide range of accessories to adapt the machine to specific tasks Hnjdpfx Aboxwd Hae Ret Financing options available: We offer leasing or credit purchase solutions. We assist in selecting the best option and handling all formalities. We cooperate with reputable financial institutions: Deutsche Leasing S.A / MLeasing Sp. z o.o. / Siemens Finance Sp. z o.o. / Pekao Leasing Sp. z o.o. PKO Leasing S.A / PEAC Poland Sp. z o.o. / Nest Lease S.A / Alior Leasing Sp. z o.o. Financing terms: - Simplified procedures for amounts up to PLN 1 million - Down payment: from 0% to 45% - Financing period: up to 96 months - Currency: PLN or EUR Call or write for more information—I will be happy to provide details and help select attachments. This advertisement does not constitute a commercial offer as defined by Art. 66 §1 of the Civil Code.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Įranga: Tipinė plokštelė prieinama, Volumetric dosing units – Granulate, powder, and regrind We offer a selection of fully operational volumetric dosing units, ideally suited for the conveying of granulate, powder, and regrind materials. • Various models available: We stock different dosing units that can be adapted according to material type and application. Hnjdpfx Abevmylzs Rjt • Testing available: On request, we can test the dosing equipment with your material to ensure it meets your requirements. • Reliable performance: All systems are checked and ready for immediate use. Contact us and we will help you find the right dosing unit for your requirements. We are happy to assist you with any questions or further consultation!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 350 mm, bendras ilgis: 15 000 mm, bendras svoris: 2 500 kg, įvesties srovės tipas: trifazis, Įranga: sūkių greitis be galo kintamas, MYYDÄÄN: Kaltenbach KBS 400 DG + NA 400 – Automaattinen vannesahalinja Huippuluokan saksalaista tekniikkaa ammattimaiseen teräsrakenteiden valmistukseen. Tämä Kaltenbach-vannesahalinja on suunniteltu suurten tuotantomäärien leikkaamiseen, tarjoten erinomaista tarkkuutta ja korkean automaatiotason. Paketti sisältää: - Kaltenbach KBS 400 DG: Puoliautomaattinen vannesaha kaksoisviisteleikkauksella. - Kaltenbach NA 400: NC-ohjattu materiaalinsyöttölaite (työntäjä) täysin automatisoituun sarjaleikkaukseen. - Rullaradat: Raskaan sarjan syöttö- ja ulostulorullat. Tekniset tiedot: Hnsdoy Rvfwspfx Ab Rjt Valmistaja: Kaltenbach GmbH + Co. KG, Saksa Malli: KBS 400 Vuosimalli: 2008 Jännite: 400 V / 50 Hz Pääsulake: 35 A (Kokonaisvirta 25 A) Ohjausjännite: 24 V DC / AC Tärkeimmät ominaisuudet: - Kaksoisviiste (DG): Sahakehys kääntyy molempiin suuntiin, joten monimutkaiset kulmaleikkaukset onnistuvat helposti ilman profiilin kääntämistä. - NC-ohjattu syöttö: NA 400 -yksikkö takaa tarkan mittatarkkuuden ja automatisoidun syötön, mikä tehostaa tuotantoa ja vähentää manuaalisia virheitä. - Luotettavuus: Kaltenbach tunnetaan vankkatekoisista rungosta ja pitkäikäisistä hydraulijärjestelmistä. Kunto: Hyvin huollettu teollisuuslaite, heti käyttövalmis. Täydellinen ratkaisu teräsrakenteiden valmistajille, jotka haluavat automatisoida profiilien leikkauksen luotettavalla, teollisuusstandardit täyttävällä tekniikalla.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1995, veikimo valandos: 41 000 h, Funkcionalumas: visiškai funkcionalus, FOR SALE: BRUDERER BSTA 50USL High-Speed Stamping Press With automatic feeder BBV 190 500 kN | 100–1120 strokes/min | Fully automatic | Swiss top quality Technical Highlights: Rated force: 500 kN Stroke rate: 100–1120 strokes per minute Operating hours: 41,000 h Main drive: 22 kW Control voltage: 24V DC Power supply: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment: 64 mm Working Areas: Max. tool installation width: 1100 mm Strip feed width: up to 256 mm Ram area: 980 × 420 mm Table area: 1080 × 650 mm Adjustable strip entry height: 60–140 mm Max. strip width: 120 mm Max. feed length: 85 mm Max. material thickness: 4 mm Feed angle: 180° Machine Dimensions (incl. BBV 190): Setup dimensions (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Features: Feeding system BBV 190 – fully synchronized mechanical strip feeder Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and ram height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration into peripheral systems Condition & Delivery: Machine in excellent technical and visual condition Fully serviced and tested Hnsdewpg Rbjpfx Ab Rst Immediately available ex Europe Worldwide shipping and installation support available Contact us today for pricing and further technical details. We are happy to help you modernize your production line with Swiss precision.

Būklė: naudotas, O F F E R We are pleased to offer you, ex stock and subject to prior sale and error: TSCHUDIN (CH) Centerless Grinding Machine Type TC-300 Year of manufacture: 2001 Grinding range – Ø: 0.5 – 25 mm (30) Max. workpiece length in plunge grinding: 125 mm (140) Max. workpiece length in through-feed grinding: 300 mm Grinding wheel size – Ø x width: Ø 300 x 125 mm (140) Regulating wheel size – Ø x width: Ø 225 x 125 mm (140) Grinding wheel peripheral speed: 35 m/sec Grinding wheel infeed: 3 mm Stepless regulating wheel speeds: 0 – 444 rpm Regulating wheel inclination: ° Grinding wheel drive approx.: 7.5 kW Total drive approx.: 13 kW – 380 V – 50 Hz Weight: 2,500 kg Accessories / Special Equipment: • The machine operates with a fixed workpiece position, which enables both the grinding spindle and the regulating spindle assemblies to be adjusted. This simplifies machine setup as well as automatic workpiece loading and unloading. • SIEMENS PLC control for automatic operation sequence with SIEMENS touchscreen. Complete electrics and PLC control were renewed in 2016! • Electromechanical regulating wheel dressing system • Stepless adjustment of regulating and grinding wheel rpm • Adjustable plunge grinding workpiece guide bridge with mounted support • Electromechanically actuated workpiece pusher & automatic pneumatic workpiece ejector • Additional outfeed cylinder for automatic tilting of workpieces after plunge grinding (adjustable 4–30 mm) • Machine is prepared for operation with HELP-TEC lift loader MSHL08/400P (not included) • Complete machine enclosure with monitoring technology • Separate control cabinet, operating manuals, and electrical diagrams of the retrofit Condition: Very good! Machine upgraded with new electronics in 2016. Click here for a video of the machine: Delivery: Ex stock, immediate availability, FCA Metzingen Hodpfx Abswftt Us Ront Payment: strictly net – upon receipt of invoice Always a large selection of grinding machines in stock – please inquire for your specific requirements!

Gamybos metai: 2020, būklė: naujas, ROMER® specializes in the manufacture of individual technological devices for powder coating systems, as well as complete fully automatic turnkey coating installations. ROMER® provides heating solutions for the aerospace and automotive industries, serving the largest companies in the world. We offer warranty and post-warranty service for equipment sold by us, including a comprehensive range of spare parts. A mesh applied to a poorly prepared surface will peel off or corrode after a short period. Ensuring the best coating essentially relies on proper degreasing—the foundation of any painting process. The coating applied to inadequately degreased parts will detach very quickly. After degreasing, the next step is to roughen the outer layer of the part, which improves paint adhesion (e.g., when bending sheet metal) and also provides protection, such as through a phosphate coating, which in turn extends corrosion resistance. There are many solutions to address these issues. What is the most important factor in a powder coating workshop? You might assume it is the applicator. This is a misconception—even the best applicator cannot help if your oven has poor temperature distribution. If the part overheats in a certain area, the paint will discolor, and if it does not heat properly, the paint will peel off. The most crucial component is the oven. Oil, gas, or electric oven? Unsure how to power your oven? Which method is more cost-effective? What are the implications? What are the operating costs? We will try to answer your questions. Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For convenient solutions in manual applications, we recommend overhead cross-tracks (lateral transport). - In automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies that manufacture different items simultaneously and, for example, operate several booths with different colors, flexible solutions using non-powered conveyors are utilized. However, this is the most expensive solution. Hnsdpfxsflrc Ss Ab Ret

Gamybos metai: 2020, būklė: naujas, ROMER® specializes in the manufacture of individual technological devices for powder coating systems, as well as complete fully automatic turnkey coating installations. ROMER® provides heating solutions for the aerospace and automotive industries, serving the largest companies in the world. We offer warranty and post-warranty service for equipment sold by us, including a comprehensive range of spare parts. A mesh applied to a poorly prepared surface will peel off or corrode after a short period. Ensuring the best coating essentially relies on proper degreasing—the foundation of any painting process. The coating applied to inadequately degreased parts will detach very quickly. After degreasing, the next step is to roughen the outer layer of the part, which improves paint adhesion (e.g., when bending sheet metal) and also provides protection, such as through a phosphate coating, which in turn extends corrosion resistance. There are many solutions to address these issues. What is the most important factor in a powder coating workshop? You might assume it is the applicator. This is a misconception—even the best applicator cannot help if your oven has poor temperature distribution. If the part overheats in a certain area, the paint will discolor, and if it does not heat properly, the paint will peel off. The most crucial component is the oven. Hnodpjfz Ndysfx Ab Rst Oil, gas, or electric oven? Unsure how to power your oven? Which method is more cost-effective? What are the implications? What are the operating costs? We will try to answer your questions. Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For convenient solutions in manual applications, we recommend overhead cross-tracks (lateral transport). - In automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies that manufacture different items simultaneously and, for example, operate several booths with different colors, flexible solutions using non-powered conveyors are utilized. However, this is the most expensive solution.

Gamybos metai: 2020, būklė: naujas, ROMER® specializes in the manufacture of individual technological devices for powder coating systems, as well as complete fully automatic turnkey coating installations. ROMER® provides heating solutions for the aerospace and automotive industries, serving the largest companies in the world. We offer warranty and post-warranty service for equipment sold by us, including a comprehensive range of spare parts. A mesh applied to a poorly prepared surface will peel off or corrode after a short period. Ensuring the best coating essentially relies on proper degreasing—the foundation of any painting process. The coating applied to inadequately degreased parts will detach very quickly. After degreasing, the next step is to roughen the outer layer of the part, which improves paint adhesion (e.g., when bending sheet metal) and also provides protection, such as through a phosphate coating, which in turn extends corrosion resistance. There are many solutions to address these issues. What is the most important factor in a powder coating workshop? You might assume it is the applicator. This is a misconception—even the best applicator cannot help if your oven has poor temperature distribution. If the part overheats in a certain area, the paint will discolor, and if it does not heat properly, the paint will peel off. The most crucial component is the oven. Oil, gas, or electric oven? Unsure how to power your oven? Which method is more cost-effective? What are the implications? What are the operating costs? We will try to answer your questions. Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For convenient solutions in manual applications, we recommend overhead cross-tracks (lateral transport). - In automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability. Hsdpfofz A H Dox Ab Rent - For companies that manufacture different items simultaneously and, for example, operate several booths with different colors, flexible solutions using non-powered conveyors are utilized. However, this is the most expensive solution.

Būklė: naujas, Gamybos metai: 2024, Attention – Special Offer!! First warranty inspection completely free of charge: Special offer only for customers who participated in a demonstration prior to purchase – at the Otinus machinery showroom in Bydgoszcz. Fiber Laser Cutting Machine "FLV-3015-C2 3kW / VF1530-3000W" Technical Specifications - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m Hodpfx Ajh Hfgyob Ront - X and Y axis repeatability: ±0.03 mm - Maximum traverse speed: 120,000 mm/min - Maximum acceleration: 1.5 G - Laser power: 3.0 kW - Source brand: Raycus or "MAX Photonics" (selectable) - Power supply: ~3×400 V, 50 Hz - Protection class: IP54 Cutting Thickness - Mild steel: recommended – 20 mm, maximum – 22 mm - Stainless steel: recommended – 8 mm, maximum – 10 mm - Aluminum: recommended – 6 mm, maximum – 8 mm - Brass: recommended – 5 mm, maximum – 6 mm Construction Thanks to its welded structure and heavy-duty legs, the machine offers extremely high stability. High-speed head movement with outstanding precision is ensured by Japanese Fuji servo drives, mounted on robust linear guides and racks with helical gears. The ABLS system automatically re-lubricates the axis guides. RayTools Cutting Head with Autofocus Control Panel The fiber laser cutting machine is equipped with a control panel comprising a screen, mouse, and keyboard – enabling convenient operation. The computer runs Windows 10 and CypCut software with the following functions: - Design creation - File import and export - Optimization of performance and cutting speed All installed programs come with lifetime licenses. Wireless Controller The laser head is controlled via a wireless controller. Safety Features The fiber laser cutter is equipped with all necessary ancillary safety features for the operator. An additional safety feature is the emergency lighting with an audio signal, which activates in situations posing a safety risk to the operator, providing a clear warning. Free Drawing Package Every Otinus laser cutter is supplied with an extensive CAD drawing package. The included designs are ready to use and can be cut immediately in any format. Our technician will demonstrate this during your training session. Technical Consultation We have specialists to help select the correct machine configuration prior to purchase, based on your technical drawings of workpieces to be produced. Included in the Machine Price 2-day commissioning and operator training - 1st day (up to 8 hours): Commissioning and control explanation - 2nd day (up to 8 hours): Independent operation of the machine under supervision of our technician – with the opportunity to program customer-specific parts. Professional Consultation - By phone: 7:30–21:00 (Mon–Sat) – 8-hour package valid within 12 months - Online: 7:30–14:30 (Mon–Fri) – 8-hour package valid within 12 months Access to Online Learning Courses - LibreCad – 12-month access Additionally Included - CAD drawing package

Būklė: naujas, Gamybos metai: 2024, Handheld Laser Welding Machine LWH-2000-N Relfar FWH20-S10A Scope of delivery: - Laser welding machine with cooling system - Welding torch with adjustable focal length and accessory kit - Fiber laser source from MAX Photonics or Raycus - Automatic wire feeder - Hose and cable set - Starter kit with nozzles and protective lenses Technical Parameters - Laser power: 2000 W - Laser wavelength: 1064 nm - Welding speed: up to 120 mm/s - Power supply: 3x400 Hz - Dimensions (with head mount): 630x1300x1500 mm Included in the price: One-day operator training and machine commissioning - Day 1 (up to 8 hours): commissioning and training Relfar FWH20-S10A Welding Head – Welding, Cutting, and Cleaning Otinus laser welding machines are supplied with a set of nozzles and protective glasses. This makes the machine exceptionally versatile and helps save money, as it eliminates the need to purchase a handheld plasma cutter or an additional device for rust and paint removal. Operation Hodpjh H Ngtjfx Ab Ront Thanks to the revolutionary welding system, any user can achieve excellent results after a brief training session. The cable allows the welder to work freely in multiple positions without moving the machine. The small heat-affected zone prevents excessive deformation. Welds are created quickly and efficiently, ensuring a correct and robust weld seam. Intended Use The laser welding machine is designed for professional use in workshops that require high-quality, aesthetic weld seams. Laser Source Specifications: 1000 W - Carbon steel: up to 3 mm - Stainless steel: up to 3 mm - Aluminum: 2 mm - Brass: 0.8 – 1 mm 1500 W - Carbon steel: up to 4 mm - Stainless steel: up to 4 mm - Aluminum: 3 mm - Brass: 1 mm 2000 W - Carbon steel: up to 5 mm - Stainless steel: up to 5 mm - Aluminum: 4 mm - Brass: 2 mm 3000 W - Carbon steel: up to 8 mm - Stainless steel: up to 8 mm - Aluminum: 7 mm Design The torch cable provides excellent freedom of movement, making welding in different positions much easier. The integrated controller, with its large, clear display, is intuitive to operate. The unit is equipped with a powerful cooling system, allowing use under demanding three-shift operation conditions. Operating Principle The laser welding machine melts the welding wire and the edges of the workpieces to be joined using laser heat. The focused beam is directed at the welding wire—fed through the wire feeder—and onto the joint area. When the trigger is pressed, the welding torch must be moved along the weld line in sync with the wire feed speed. A constant operating temperature for both the laser source and the torch is maintained by a water-cooling system. The beam output and cooling are managed by a controller, which regulates values according to user-defined parameters.

Būklė: naujas, Gamybos metai: 2024, Attention – Special Offer!! First Warranty Inspection Completely Free of Charge: Special offer only for customers who participated in a demonstration before purchase – at the Otinus Machinery Showroom in Bydgoszcz. Some of our machines are AVAILABLE FROM STOCK. Hnjdpfjtixt Hsx Ab Rot Fibre Laser Cutting System “FLV-3015-C2 20kW / VF1530-12000W” Technical Specifications - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - X and Y axis repeatability: ±0.03 mm - Maximum speed: 120,000 mm/min - Maximum acceleration: 1.5 G - Power: 20 kW - Power consumption: 73 kW - Source brand: Raycus or “MAX Photonics” – selectable - Power supply: ~3×400 V, 50 Hz - Protection class: IP54 Cutting Thickness - Mild steel: recommended thickness – 35 mm, maximum thickness – 35 mm - Stainless steel: recommended thickness – 25 mm, maximum thickness – 25 mm - Aluminium: recommended thickness – 18 mm, maximum thickness – 18 mm - Brass: recommended thickness – 18 mm, maximum thickness – 18 mm Construction The machine offers exceptional stability thanks to its welded construction on sturdy legs. High head movement speed and precision are ensured by Japanese Fuji servo drives mounted on robust linear guides, helical racks, and pinions. The ABLS system automatically replenishes lubricant in the axis guides. RayTools Cutting Head with Autofocus Wireless Controller Laser head operation is managed via a wireless controller. Safety The fibre laser cutting system is equipped with all the necessary safety features and accessories for the operator. An additional safety feature is the emergency lighting with acoustic signal, which is activated in hazardous situations to alert the operator and ensure safety. Free Drawing Package Every Otinus laser cutting system comes with an extensive CAD drawing package. The included designs are completely prepared and can be immediately cut in any format. During training, our technician will show you how to use them. The drawings are invaluable for anyone aiming to manufacture a wide range of decorative items. Technical Consultation We have specialists who can help select the appropriate machine and accessories prior to purchase—based on the technical drawings of your components. Machine Delivery Includes - 2-day training and machine installation - Day 1: up to 8 hours – commissioning and control system training - Day 2: up to 8 hours – independent machine operation under the supervision of our technician, including the ability to program specific parts - Technical consultation with our specialists - By phone: from 7:30 am to 9:00 pm (Mon-Sat) – 8-hour package to be used within 12 months - Online: from 7:30 am to 2:30 pm (Mon-Fri) – 8-hour package to be used within 12 months - Access to Otinus Academy online courses - LibreCad – access for 12 months Additionally, you receive: - CAD drawing package

Būklė: naujas, Gamybos metai: 2024, Many of our machines are available ex stock. Call us to find out more! The offer applies to the basic version of the machine. All optional equipment and their prices can be found on our website. Fiber Laser Cutting System FLV-3015-CT-6022 20kW / VF1530-12000W Technical Specifications - Maximum sheet size: 3000 x 1500 mm - Maximum profile height: 220 mm - Maximum profile length: 6000 mm - Positioning accuracy (X and Y axis): ±0.05 mm/m - Repeatable positioning accuracy (X and Y axis): ±0.03 mm - Maximum speed: 120,000 mm/min - Maximum acceleration: 1.5G - Rated power: 20.0 kW - Power requirement: 73.0 kW - Source brand: Raycus or MAX Photonics (selectable) - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Construction The machine provides outstanding rigidity thanks to its welded construction. High-speed head movement with exceptional precision is ensured by Japanese Fuji servo drives. Rotator for Profile Cutting The machine is equipped with a rotary axis for profile processing. - Maximum processable profile length: 6000 mm - Profile chuck diameter: 220 mm Hnodjtix Rnspfx Ab Rst Automatic lubrication system for axis guides. RayTools Autofocus Cutting Head Otinus Protect (optional*) This product provides individual protection for your laser source. With this service, you can ensure uninterrupted production in your business. We secure your operations, helping you complete your jobs on time. Voltage Stabilizer (optional*) Control Panel The machine is operated via a Windows 10 based computer and CypCut software, offering design, file import/export, and workflow optimization functions. All installed software is supplied with lifetime licenses. The machine is equipped with a wireless controller. Professional Support We maintain close communication with our customers. Therefore, each machine purchase includes a support hours package from Otinus technicians. Otinus Academy Training Software Purchasing this machine includes one year of online course access, making it easy to onboard new employees or refresh knowledge gained through training. Scope of Supply - 3-day training and machine installation - Day 1 & 2 (up to 8 hours each): Commissioning and control system training - Day 3 (up to 8 hours): Independent machine operation under supervision of our technician, with the possibility of programming specific details - Consultation with our specialists - By phone: 7:30 to 21:00 (Mon-Sat) – 8-hour package to be used within 12 months - Online: 7:30 to 14:30 (Mon-Fri) – 8-hour package to be used within 12 months - Access to Otinus Academy online courses - LibreCad – access valid for 12 months Additionally included: - CAD drawing package

Būklė: naujas, Technical Parameters - Maximum thickness of bent sheet metal (S235): 3 mm - Nominal pressing force: 400 kN - Maximum length of bent sheet metal: 1,600 mm - Throat depth in the beams (insertion depth): 200 mm - Maximum stroke of the movable beam: 100 mm - Maximum opening height: 300 mm - Distance between beams: 1,200 mm - Rear gauge retraction: 600 mm - Motor power: 4 kW - Length: 1,800 mm - Width: 1,200 mm - Height: 1,850 mm - Weight: 2,300 kg Tools - Front supports: 2 pcs - Backgauge distance adjustment (X-axis): electric motor - Beam adjustment (Y-axis): electric motor - Finger placement height adjustment (R-axis): manual - Punch fastening type: quick-change, AMADA type Control Unit “Otinus CNC OT-41” The Otinus CNC control stands out for its user-friendly and intuitive menu. The software automatically calculates the bending angle. The large, full-color touchscreen is easy to read from any angle. The control unit allows storage of up to 2,000 programs, each with 30 steps. High-Quality Components - German brand hydraulic valve Rexroth - Electrical system components from Schneider - Safety circuit elements by Omron and Schneider Hydraulic Steel Connections Hydraulic connections are made from steel pipes instead of rubber hoses, reducing the risk of future leaks. Safety We place special emphasis on the safety of our customers and their personnel – therefore, our press brakes feature visible markings, side covers, a rear safety gate, easily accessible safety switches, and a light curtain to prevent hands from entering between punch and die during operation. The machine is delivered with a carefully prepared instruction manual in German. The device is supplied with a Declaration of CE conformity. OCS – Oil Cooling System Hedpow Dzc Isfx Ab Rjnt The Oil Cooling System ensures stable machine performance even after extended periods of continuous operation. Specialist Assistance We ensure continuous communication with our customers. For this reason, we include a time package for the assistance of an Otinus specialist with every machine sold. As part of the service, our specialist can: - Define bending steps for complex parts, - Advise on material and tool selection, - Assist in choosing operating parameters for different materials. Technical Consultation Our specialists help choose the right equipment and accessories before purchase—based on technical drawings of the workpieces to be produced. The following services are included in the machine price: A 2-day training and machine installation - Day one, up to 8 hours: Installation and training on the control unit. - Day two, up to 8 hours: Independent work on the machine under supervision of our technician → possibility to program specific parts required by the customer. Telephone consultation with an Otinus specialist From 7:30 to 21:00 (Mon-Sat) – 8-hour package (to be used within 12 months) Terms of cooperation The customer assumes responsibility for the machine once it is unloaded and transported on the company premises.

Būklė: naujas, Gamybos metai: 2024, Hydraulic Guillotine Shear SMO-3210-N QC12Y 10x3200 Technical Specifications - Maximum sheet thickness (S235): up to 10.0 mm - Maximum cutting length: 3200 mm - Cutting angle: 1.5° - Number of strokes per minute: 10 - 12 - Maximum backgauge distance: 600 mm - Motor power: 15.0 kW - Length: 4000 mm - Width: 1800 mm - Height: 2100 mm - Weight: 8,400.0 kg Equipment - Rear backgauge with electric motor (on ballscrew drive) - Hydraulic sheet clamping along the entire cutting length - Blade clearance adjustment - Ball rollers on the work table - Work area lighting - Front support arms - Mobile foot switch E21S Control System (Mounted on a movable arm on the left side of the machine) - Backgauge control - Capability to store 40 programs – up to 25 different steps per program - Retraction function - One-touch parameter saving - Parameter memory in case of power failure Hydraulic Connections Made of Steel Hydraulic connections are made from steel pipes instead of rubber hoses, reducing the risk of future leaks. OCS - Oil Cooling System The oil cooling system ensures machine parameters remain stable even after prolonged continuous operation. PCS - Pressure Control System The pressure control system ensures reliable blade operation for many years. Professional Support We ensure constant contact with our customers. That’s why we offer extensive Otinus Specialist Support with every machine purchased. Technical Consultation Our technicians will help you select the right machine and appropriate accessories – based on the relevant technical drawings of the parts to be manufactured. Visit and Test Our Machine Take part in an exclusive demonstration led by a qualified Otinus technician to showcase the full range of machine functions. You are welcome to bring technical drawings and sample materials. Hsdpfxeiukw Te Ab Rjnt Included with the machine: 1-day operator training and commissioning - Day 1 (up to 8 hours) – Start-up and training on the control system. Telephone support from a specialist - From 7:30 to 21:00 (Mon-Sat) – an 8-hour package to be used within 12 months. Free loan of transport rollers and two jacks to facilitate placement of the machine at your site. Rollers and jacks will be delivered upon prior request (at least 7 days before delivery). Terms of Collaboration - 24-month warranty period. - Delivery time: approx. 10 - 12 weeks. This does not apply if the machine is marked as available from stock. - The machine is brand new - Warranty and post-warranty service from the seller - The customer is responsible for the machine during unloading and on-site transportation