Sraigtinis kompresorius

Comp Air Cyclone 6000N 75Kw 8bar 12,9m3/min

Sąlyga: geras (naudotas), Gamybos metai: 2003, Manufacturer: KUKA Dodpfxeh Dw Dqs Ab Sjkg Model: KR 210 L 180 Year of manufacture: 2003 Maximum payload: 150 kg

Sąlyga: naudotas, Gamybos metai: 2017, veikimo valandos: 20 000 h, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: GA11VSD+FF, Compressed Air System Atlas Copco Consisting of: GA18 Plus Compressor, year 2007 GA11VSD+FF Compressor, year 2017 ES 6 Control Unit Buyer is responsible for proper professional disassembly. Dksdpfxsvx Nmfo Ab Ssg Forklift will be provided.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle completely overhauled at the end of 2024 !!! Drives for linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X-, Y-, Z-axis: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Color Enclosure, gantry, control cabinet: light grey Milling head and applications: green Djdew Rl S Sjpfx Ab Sjkg Additional equipment - Three-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. Machine still connected to power and immediately available.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Initial commissioning: 2014 Control system: Heidenhain iTNC 530 HSCI incl. HR 520 electronic handwheel Machine Hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Hours on current milling spindle: approx. 900 h Travel X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Dksdpfx Aswywcisb Sjg Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Drives for linear axes Feed rate X/Y/Z-axes: up to 60 m/min Axis acceleration X/Y/Z-axes: up to 5 m/s² Electrical connection data Connected load: 190 kVA Primary fuse: approx. 315 A Dimensions, weights Machine footprint with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area cover - Chip conveyor - LTA emulsion mist extraction unit Optional at extra cost: - Renishaw RMP60 wireless touch probe - BLUM Control NT Condition of the machine Fully functional, in very good condition, and can still be inspected under power! Images shown are exemplary and are from a new machine of this type. Original images will be provided shortly!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Oro kondicionierius, vėsinimo galia: 56 kW (76,14 AG), aušinimo tipas: vanduo, įėjimo dažnis: 50 Hz, šildymo galia: 67 kW (91,09 AG), kuro tipas: dujos, "SANYO" PANASONIC ECO G gas heat pump air conditioning unit Model: SGP-E190J2GU2W Nissan FY5 engine Power supply: 230 V AC, 1 phase, 50 Hz Maximum electrical power: 1.16 kW, 5.4 A (continuous operation) Device protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS) (cooling): 43.5 kW Heat input (HS) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure, high-pressure side: 30 bar Design pressure, low-pressure side: 16 bar FOR OUTDOOR USE ONLY! We have 4 units in stock! Dsdpod Tiu Eefx Ab Sekg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2024, veikimo valandos: 5 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2MAM022829, vėsinimo galia: 1 000 kW (1 359,62 AG), Kühlleistung: 959 kW Stromart: 3-Phasen / 50 Hz / 400 V Kühlungsart: luftgekühlt Gesamtgewicht: 7.973 kg (Betriebsgewicht) / 7.597 kg (Transportgewicht) Umgebungstemperatur (max.): 35°C Umgebungstemperatur (min.): 12,8°C (bei Teillastbetrieb) Verdichtertyp: Schraubenverdichter, halbhermetisch, drehzahlgeregelt (VSD) Gesamtleistungsaufnahme: 309,9 kW Schallpegel: 74 dB(A) in 10 m Entfernung Kältemittel: R134a, Gesamtfüllmenge: 242 kg Dkjdpfx Abjimz Uae Ssg Wasserdurchfluss: 146,7 m³/h (40,76 L/s) Druckverlust (Verdampfer): 52,2 – 64,1 kPa COP (Vollast): 3,09 IPLV (Teillast): 5,12 Anzahl der Ventilatoren: 14 Stück (7+7), mit Geräuschreduzierungsset Typenschild vorhanden Baujahr: 2018

Gamybos metai: 1988, Sąlyga: naudotas, Compressor unit type 178 A CD E Dkodegw Dqpjpfx Ab Sjg Delivery rate: 4,760 l/min Operating pressure: 9 bar Power: 30 kW

Sąlyga: visiškai atnaujintas (naudotas), The completely overhauled vacuum pump is available from stock and ready for immediate use. We recommend installation only by trained personnel. Adapter materials available upon request. Oil filling: M-VAC 100 Technical data: 50Hz / 5.5 kW / 11.5/6.6 A Ultimate pressure with open gas ballast: 0.35 mbar Ultimate pressure with closed gas ballast: 0.25 mbar Dkedpjq S N Iiefx Ab Sjg Subject to prior sale! This offer is valid only for customers within Germany and other European countries!

Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 85382, UNIVERSALES BEARBEITUNGSZENTRUM MAHO MH 800 C, Baujahr: 85382 Verfahrwege: X-Achse: 800 mm Y-Achse: 500 mm Z-Achse: 600 mm Arbeitstisch-Abmessungen: 900 x 625 mm Maximale Tischbelastung: 600 kg Spindeldrehzahl: 20 – 5.000 U/min, 15 kW Werkzeugaufnahme: ISO 40 Kegel Werkzeugmagazin mit 30 Plätzen MAHO CNC-Steuerung Maschinenabmessungen (LxBxH): 3.350 x 2.520 x 2.500 mm Maschinengewicht: 6.200 kg Guter technischer Zustand Preis: 13.000 EUR zzgl. MwSt. Irrtum, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Englisch, Deutsch, Ungarisch, Französisch und Rumänisch. Dkodpfxoldgf He Ab Ssg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 87 000 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 775 kg, bendras ilgis: 1 770 mm, bendras plotis: 900 mm, bendras aukštis: 1 530 mm, kuro tipas: elektrinis, tūrio srautas: 190 m³/val, darbinis slėgis: 8 juosta, slėgis (maks.): 10 juosta, triukšmo lygis: 68 dB, aušinimo tipas: oras, Įranga: šaldymo sausintuvas, Manufacturer: Kaeser ASD 32T Screw Compressor + Refrigeration Dryer Regularly serviced!!! Complete documentation available Year of manufacture: 2008 Rated pressure: 8 bar Air flow rate: 3.16 m³/min Air flow: 189.6 m³/hour Operating hours: 87,000 Refrigeration dryer: ABT60 Compressed air connection: G 1¼ Dkodpsi E H Ikefx Ab Seg Voltage: 400 V/3 PH, 36 A Power: 18.5 kW Motor speed: 2,945 rpm Ambient temperature: 3 / 45°C Machine weight: 745 kg Machine dimensions: 1,770 x 900 x 1,530 mm