Faro Faroarm Platinum pirkti naudotą (155)

Būklė: naudotas, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General Information: Double-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000 with Intracooler 2, enables precise heat flow measurements from approx. –70 °C to 750 °C, featuring high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Double-furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Standard Temperature Range: approx. –180 °C to 750 °C (with appropriate cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and rapid response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two controlled gas lines with automatic switching Typical purge gases: Nitrogen, Helium, Argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet ports Connection for cooling unit Power supply connection Accessory interfaces (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Interface for temperature calibration Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power 400 VA Accessories Cooling system PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply 96-position autosampler High-pressure DSC cells, UV/photocalorimeter accessories IEC power connector Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Kdedpfx Agoyluicjgsu Note regarding item condition: Sold without software/PC.

Būklė: naujas, Gamybos metai: 2024, Attention – Special Offer!! First Warranty Inspection Completely Free of Charge: Special offer available only to customers who participated in a demonstration prior to purchase – at the Otinus machinery showroom in Bydgoszcz. Handheld Laser Cleaner “2000W LCH-2000-N” The laser cleaner is an innovative device for precise and effective surface cleaning. It focuses a laser beam on contaminants, causing them to evaporate or dissolve. Laser cleaners are used across various industries, from automotive to heritage conservation. These devices are characterized by high efficiency, minimal waste, and limited interference with the surface of the object being cleaned. Compared to conventional cleaning methods, a laser cleaner can be more precise and cost-effective. The following services are included in the machine price: Kdsdpfx Aethittsggeu A one-day training session and machine installation, for up to 8 hours – installation and training relating to the control unit. Optional MAX Photonics The brand “MAX Photonics” was founded in 2004. The company’s origins lie in the production of light and optical sources for scientific institutes. Product quality and operational stability were established as the primary objectives. The company quickly recognized that the future of laser technology is closely tied to fiber optics. Research and development efforts, begun in 2007, led to the market launch of its first 500-CW source in 2014. Since then, the company has been actively expanding its technologies in the fields of laser cutting, welding, marking, and engraving. Currently, the company offers sources with power ratings of up to 40,000 W and aspires to become a leader in the production of ultra-high-power industrial lasers. Raycus The company “Wuhan Raycus Fiber Laser” was established in 2007. It focuses on independent research and development, fostered by mergers with other companies. Raycus produces laser sources for a wide range of applications, including cutting, welding, soldering, marking, and engraving. Devices from this brand are widely used in the automotive, aerospace, medical, electronics, and advertising industries.

Gamybos metai: 2026, būklė: naujas, BEFARD XP602 Vacuum Suction Cup for Glass Installation • Maximum lifting capacity: 600 kg • 8 suction cups • Two-speed vacuum system Kdjdpfeiauz Nsx Aggeu • Vacuum release pilot • Battery powered • Manual 360-degree rotation • Locks at every 90-degree interval • Fully adjustable in both vertical and horizontal positions Additional options: • HS spacer • Spare battery • Transport trolley • Mesh box pallet Other models available: Grippers with lifting capacities of 300 kg, 450 kg, 800 kg, 900 kg, 1000 kg Available in your preferred color

Būklė: naujas, Gamybos metai: 2024, Attention – Special Offer!! First warranty inspection completely free of charge: Special promotion only for customers who participated in a product demonstration prior to purchase – at the Otinus machinery showroom in Bydgoszcz. Handheld Laser Cleaner “1000W LCH-1000-N” The laser cleaner is an innovative device for precise and effective surface cleaning. It focuses a laser beam onto contaminants, causing them to either vaporize or dissolve. Laser cleaners are used in various industries, from automotive manufacturing to historical monument preservation. These systems are characterized by high efficiency, minimal waste, and low interference with the surface of the object being cleaned. Compared to traditional cleaning methods, a laser cleaner can be more precise and cost-effective. Kdjdpfx Agothithogju The following services are included in the machine price: A one-day training session and machine installation, up to 8 hours – on-site installation and controller training. Choice of: MAX Photonics The “MAX Photonics” brand was established in 2004. The company’s origins lie in producing light and optical sources for scientific institutes. Product quality and operational stability were set as the highest priority. The company quickly recognized that the future of laser technology was closely tied to fiber optics. Research and development efforts that began in 2007 culminated in the launch of their first 500-CW source in 2014. Since then, the company has been rapidly expanding its technologies in the fields of laser cutting, welding, marking, and engraving. Currently, it offers sources with power ratings up to 40,000 W. The company’s present goal is to become a leader in the production of ultra-high-power industrial lasers. Raycus The "Wuhan Raycus Fiber Laser" company was founded in 2007. It focused on independent research and development, based on mergers with other businesses. The company manufactures laser sources for a wide range of applications—cutting, welding, soldering, marking, and engraving. Devices from this brand are used in the automotive, aerospace, medical, electronics, and advertising industries.

Būklė: naujas, Gamybos metai: 2024, Attention – Special Offer!! First Warranty Inspection Completely Free: Special offer valid only for customers who participated in a demonstration before purchase – at the Otinus machine showroom in Bydgoszcz. Handheld Laser Cleaner "1500W LCH-1500-N" The laser cleaner is an innovative machine for precise and effective surface cleaning. It focuses a laser beam on contaminations, causing them to evaporate or dissolve. Laser cleaners are used across various industries, from automotive to historical preservation. These machines are characterized by high efficiency, minimal waste, and limited interference with the surface of the cleaned object. Compared to traditional cleaning methods, a laser cleaner can be more precise and cost-effective. Kdjdpfx Aethitpoggou The following services are included in the machine price: A one-day training and machine installation, up to 8 hours – installation and training on the controller system. Choice of Options MAX Photonics The brand "MAX Photonics" was established in 2004. Its roots lie in the production of light and optical sources for scientific institutes. Product quality and operational stability have been set as their top priorities. The company soon realized that the future of laser technology is closely linked to fiber optics. Research and development started in 2007, leading to the market introduction of their first 500-CW source in 2014. Since then, the company has been intensively expanding its technologies in laser cutting, welding, marking, and engraving. Today, they offer sources with output up to 40,000 W. Currently, the company aspires to become a leader in the production of ultra-high-power industrial lasers. Raycus "Wuhan Raycus Fiber Laser" was founded in 2007. The company focuses on independent research and development, also drawing on its partnerships with other enterprises. They manufacture laser sources for a wide range of applications – including cutting, welding, soldering, marking, and engraving. Devices of this brand are utilized in the automotive, aerospace, medical, electronics, and advertising industries.

Būklė: naujas, Gamybos metai: 2024, Attention – Special Offer!! First Warranty Inspection Completely Free: Special offer exclusively for customers who participated in a demonstration before purchase – at the Otinus Machinery Showroom in Bydgoszcz. Handheld Laser Cleaner “3000W LCH-3000-N” Kdedpfx Aer Eqbyeggju The laser cleaner is an innovative device for precise and effective surface cleaning. It focuses a laser beam on contaminants, causing them to vaporize or dissolve. Laser cleaners are used across various industries, from automotive to heritage conservation. These devices stand out for their high efficiency, minimal waste output, and limited interference with the surface of the object being cleaned. Compared to conventional cleaning methods, a laser cleaner can be more precise and cost-effective. The following services are included in the machine price: A 1-day training and machine installation, up to 8 hours – installation and training on the control unit. Your Choice of: MAX Photonics The brand "MAX Photonics" was established in 2004. The company's roots are in the manufacture of light and optical sources for scientific institutes. Ensuring quality and product reliability was set as the top priority. The company quickly recognized that the future of laser technology is closely tied to fiber optics. Research and development initiated in 2007 led to the launch of their first 500-CW source in 2014. Since then, the company has been intensively developing its technologies in the areas of laser cutting, welding, marking, and engraving. MAX Photonics currently offers sources with power output up to 40,000 W, and is striving to become a leader in the production of ultra-high-power industrial lasers. Raycus The company “Wuhan Raycus Fiber Laser” was founded in 2007. It focused on independent research and development, benefitting from mergers with other companies. Raycus produces laser sources for a wide range of applications, including cutting, welding, soldering, marking, and engraving. Devices from this brand are used in the automotive, aerospace, medical, electronics, and advertising industries.

Būklė: naujas, Gamybos metai: 2024, Handheld Laser Welding Machine LWH-2000-N Relfar FWH20-S10A Scope of delivery: - Laser welding machine with cooling system - Welding torch with adjustable focal length and accessory kit - Fiber laser source from MAX Photonics or Raycus - Automatic wire feeder - Hose and cable set - Starter kit with nozzles and protective lenses Technical Parameters - Laser power: 2000 W - Laser wavelength: 1064 nm - Welding speed: up to 120 mm/s - Power supply: 3x400 Hz - Dimensions (with head mount): 630x1300x1500 mm Included in the price: One-day operator training and machine commissioning - Day 1 (up to 8 hours): commissioning and training Relfar FWH20-S10A Welding Head – Welding, Cutting, and Cleaning Otinus laser welding machines are supplied with a set of nozzles and protective glasses. This makes the machine exceptionally versatile and helps save money, as it eliminates the need to purchase a handheld plasma cutter or an additional device for rust and paint removal. Operation Thanks to the revolutionary welding system, any user can achieve excellent results after a brief training session. The cable allows the welder to work freely in multiple positions without moving the machine. The small heat-affected zone prevents excessive deformation. Welds are created quickly and efficiently, ensuring a correct and robust weld seam. Intended Use The laser welding machine is designed for professional use in workshops that require high-quality, aesthetic weld seams. Laser Source Specifications: 1000 W - Carbon steel: up to 3 mm - Stainless steel: up to 3 mm Kedpfsh H Ngtex Aggjdu - Aluminum: 2 mm - Brass: 0.8 – 1 mm 1500 W - Carbon steel: up to 4 mm - Stainless steel: up to 4 mm - Aluminum: 3 mm - Brass: 1 mm 2000 W - Carbon steel: up to 5 mm - Stainless steel: up to 5 mm - Aluminum: 4 mm - Brass: 2 mm 3000 W - Carbon steel: up to 8 mm - Stainless steel: up to 8 mm - Aluminum: 7 mm Design The torch cable provides excellent freedom of movement, making welding in different positions much easier. The integrated controller, with its large, clear display, is intuitive to operate. The unit is equipped with a powerful cooling system, allowing use under demanding three-shift operation conditions. Operating Principle The laser welding machine melts the welding wire and the edges of the workpieces to be joined using laser heat. The focused beam is directed at the welding wire—fed through the wire feeder—and onto the joint area. When the trigger is pressed, the welding torch must be moved along the weld line in sync with the wire feed speed. A constant operating temperature for both the laser source and the torch is maintained by a water-cooling system. The beam output and cooling are managed by a controller, which regulates values according to user-defined parameters.

Būklė: naudotas, Farley greene Sievmaster Rota 200 nerūdijančio plieno sietinimo mašina, centrifuginis sietas Krepšelio skersmuo 180mm x 810mm Su valdymo spinta ir dažnio keitikliu Su mobiliais rėmais Peržiūrėkite ir kitus mūsų skelbimus Kdjdpewyfztsfx Aggsu VMA Wekerom

Būklė: naujas, Gamybos metai: 2026, BEFARD TB7002 Mini Crane TECHNICAL DATA: • Maximum lifting capacity: 3,100 kg • Outreach: approx. 19 m (with optional equipment) • Power supply: 3-cylinder diesel engine + mains power via 230V, 400V or 110V cable – optional lithium-ion batteries available at extra cost • Radio remote control for both travel and crane operation • Hydraulic jib with two extensions • Non-marking tracks • Extendable chassis (78–110 cm) • Two operating modes (fast and slow) • Standard anti-overload system • 4 hydraulically extendable and lowerable outriggers • 900 kg winch + accessories – 50 m rope (optional 65 m) • Machine can be transported on a trailer with a permissible total weight of up to 3.5 t • Outrigger pads ADDITIONAL OPTIONS: • Advanced crane work zone visualization system + remote control with visualization of working areas and outrigger positions • Hydraulic boom search hook • Main boom search hook • Manual jib to hydraulic jib conversion • LED work light Kdsdpfx Ajibqirjggsu TB7002E VERSION – Operation on lithium-ion batteries (at extra charge) • Possibility to work via power cable during battery charging Choice of color available Option to purchase a crane without hydraulic jib

Būklė: naudotas, Šis pasiūlymas skirtas Sanyo MPR-720 Labcool farmaciniam šaldytuvui. Įrenginys yra visiškai veikiantis ir paruoštas nedelsiam naudojimui. Kjdpfx Agoyyxbyogjdu Sukurtas stabiliai ir tolygiai temperatūros kontrolei, šis farmacinis šaldytuvas idealiai tinka vakcinų, reagentų ir jautrių laboratorinių medžiagų saugojimui su tikslumu ir patikimumu. Skaidrumo ataskaita ir techninis auditas: • Kilmė: Biotechnologijų / Mokslo tyrimų įstaiga • Būklė: Tiesiai nuo stendo (Dekontaminuotas/originalus) • Įjungimo testas: Patvirtinta; veikia skaitmeninis ekranas, apšvietimas ir ventiliatoriaus sistema. • Autentiškumas: 100% originalios dalys (neatnaujintas)

Būklė: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AN-No.: 88.04.017 D, 8 units of very clean (refurbished) Jakob Müller Frick AG weaving looms NF42 from 1988, 1989, and 1990 available from my stock. All machines are running smoothly and are 100% operational (completely overhauled). Each machine has 12 shafts, is supplied without creel, and comes with Mütrans, some also with Müdata. 1 unit NF 2/84mm from 1989 for €6,900 Stock no.: 88.04.017 D, with Müdata and Mütrans, 16 shafts 3 units NF 2/84mm overhauled from 1990, each at €6,500 Stock no.: 90.01.704 B Stock no.: 90.01.755 A Stock no.: 90.01.229 A 1 unit NF 2/84mm overhauled from 1989 for €6,500 Stock no.: 89.00.118 D 3 units NF 2/84mm overhauled from 1988, each at €6,500 Stock no.: 88.04.244 A Stock no.: 88.02.758 A Stock no.: 88.02.758 B The machines originate from a curtain tape production and were originally equipped with a Z compartment. They have been converted to standard compartments as part of the general overhaul. All tension beams and pressure rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or have been newly vulcanized. The central lubrication unit in the chain case has been optimized by us. All machines have the first shaft position free (for heavier reeds) and are fitted with 12 shafts. All machines are equipped with Mütrans II. Machines can optionally be supplied with double belt take-off (for heavy fabrics). This is possible for 4–5 machines, as far as I know. It is also possible to equip them with fine-knurled tension beams, also for 4–5 machines. All needle holders are suitable for double needles. Two additional Mütrans II systems can be fitted upon request for this purpose. The machines have been completely rebuilt. All bearings, shafts, and bushings have been checked and replaced if necessary. All swing arms have been inspected and replaced as needed. Configuration installed: 1st shaft position free (spacer block fitted) 2nd and 3rd shaft: swing arm 201 Kdsdpfsr Ix Igsx Aggsu 4th–6th shaft: swing arm 202 7th–9th shaft: swing arm 203 10th–12th shaft: swing arm 204 13th shaft: swing arm 205 All heald springs have been checked and replaced as required, with none being brittle, cracked, or defective. The electrical installation has been checked, the thread monitoring board has been inspected and repaired or replaced as necessary. All machines are painted in RAL 6021 Müller pale green. All covers are clean and undamaged. The machines are offered without Müdata. Four of the machines are also fitted with crawl (crawler) gear. All machines have been set up and tested. The machines are delivered without oil, weft threads, slats, reeds, needles, or chain links. Delivery is on Euro pallet, FOB Wuppertal.

Būklė: naudotas, Gamybos metai: 2017, Arburg 470S 1100 290 injection moulding machine, year 2017 2-component machine The machine has been idle for quite some time. It is from 2017 and has only around 21,600 operating hours. The machine provides 1,100 kN clamping force. Below, a 290 unit with a 35 mm screw is installed; above, a 100 unit with a 30 mm screw. So far, only ABS and TPE have been processed. The machine is equipped with a hot runner system and 3 core pulls, as well as additional options. Included is a KUKA handling system, which is operated via the Selogica control of the machine, and the complete safety enclosure. The two material loaders and the large conveyor belt are not included in the sale. Kdsdow D R N Rspfx Aggju

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, BEFARD TR300 – Crawler Transport Platform Kdodpjv I Ux Sjfx Aggeu Maximum load capacity – 300 kg Weight approx. – 155 kg Power supply – AGM batteries (optional lithium-ion batteries) Remote control Integrated charger Non-marking tracks Device width – 700 mm Platform width – 700 mm Device length – 1112 mm Platform length – 1000 mm Two travel speeds Maximum speed 1.5 km/h Color options available

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Universal Table Top Milling Machine FZ0 by Zimmermann Model-making milling machine with variable-speed Bosch motor GGS 27 LC. Ideally suited for use in model and mold making. Drive motor: 230 Volt, 0.6 kW Spindle speed adjustable approx. 12,000 to 27,000 rpm Machine table approx. 590 x 420 mm Unit tilts both sides up to 90 degrees Longitudinal fence with fine adjustment Extraction hood and safety guard Kjdsw Ip Dgepfx Aggsdu Collet chuck 6 mm and 8 mm Includes the milling cutters and bits shown in the photos Comes with lockable base cabinet, 2 drawers, and 1 door, key included The base cabinet was upgraded by the previous owner with an aluminum plate and angled brackets, providing an integrated extraction option (see photos) Waldmann overhead light with magnifying glass Original paint, touched up in some areas CE marked Very well-maintained machine from prototype manufacturing in the motorsports division of a Wolfsburg-based automotive manufacturer. Evidently, has not seen much use so far. Machine dimensions approx. 680 x 600 x 780 mm (LxWxH). Cabinet dimensions approx. 600 x 620 x 880 mm (LxWxH). Weight approx. 190 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier'.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: For the application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity 18 l/min Frequency inverter for variable speed of application roller Frequency inverter for variable speed of counter roller Transport belt speed adjustable 3–14 m/min Stainless steel recovery trays Pad Group + Brush Group: For distributing and removing excess oils Touch screen control Manual height adjustment Transport belt speed adjustable 3–14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions (L x D): 300 x 160 mm Quick-change system for brushes UV / LED Group: Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV LED output: 12 Watt/cm² Incl. ventilation fan Transport belt made of Kevlar fabric Transport belt speed adjustable 3–14 m/min Discharge Conveyor Belt: Length approx. 2,500 mm Max. working width: 300 mm Kjdpfxjx Ah A Aj Aggsdu Transport belt speed adjustable 3–14 m/min Notes on Used Machinery: • Errors in technical specifications and prior sale reserved. • Prices stated are ex-location and ex-loading. • Machine has been cleaned and function tested. • All machines are sold as seen, without any guarantee or warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements only valid in written form. (We will only respond to enquiries that include your address and telephone number!)

Būklė: naudotas, Šiame sąraše siūlomas SWECO PH06 farmacinis separatorius su atitinkamu SWECO Adjust-A-Vibe valdymo pultu. PARDAVĖJO PRANEŠIMAS: Jei turite konkurencingą pasiūlymą dėl šio gaminio, visada stengsimės jį viršyti. Prekės parduodamos „kaip matote“. ID: FFFF049 Kedpexzia Hofx Aggsdu Skelbimo pavadinimas: SWECO PH06Y2 farmacinis separatorius

Gamybos metai: 2015, būklė: labai geros būklės (naudotas), Sietas beveik naujos būklės. Tiesiogiai iš mažos miltelių gamyklos. Kodpfxew R Eb To Aggjdu

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 18,39 kW (25,00 AG), Įranga: 4 viename kaušas, padėklų šakės, Šis skelbimas pateikiamas tik informaciniu tikslu ir nėra laikomas pasiūlymu teisiniu požiūriu. KINGWAY FARMER 906T – teleskopinis krautuvas TECHNINĖS CHARAKTERISTIKOS Modelis: FARMER 906T Kaušo talpa: 0,3 m³ Nominali kėlimoji galia: 600 kg Maksimali kėlimoji galia: 700 kg Bendrasis svoris: 1 650 kg Maksimalus kėlimo aukštis: 2 550 mm Išmetimo aukštis: 1 850 mm Variklis: PERKINS Variklio galia: 18,4 kW / 24,5 AG Nominalūs apsisukimai: 2 600 aps./min. Vėžių plotis: 860 mm Atstumas tarp ašių: 1 340 mm Matmenys: 3 725 × 1 150 × 2 360 mm Standartinės padangos: 26×12.00-16 Maksimalus greitis: 10 km/h GARANTIJA IR APTARNAVIMAS 12 mėnesių garantija, su galimybe ją pratęsti iki 3 metų Nuosavas mobilusis klientų aptarnavimo skyrius Atsarginių dalių tiekimas Profesionalus remonto ir priežiūros paslaugos KOMPLEKTACIJA Kdedszwl Thspfx Aggsu KINGWAY FARMER 906 krautuvas su 4-in-1 kaušu Padėklų šakės 1 metų mobilioji garantija, su galimybe ją pratęsti iki 3 metų Naudojimo instrukcija Originali sąskaita faktūra, kurioje nurodytas PVM KAINA: 16 900 € (be PVM) 20 111 € (su PVM) KINGWAY Deutschland e. K. Untergambach 10 84098 Hohenthann

Būklė: beveik kaip naujas (naudotas), 4 x Stainless Steel Pressure Vessels, Insulated, Temperature-Controlled, with Agitator Connection Technical Data / Dimensions Available Quantity: 4 Volume: approx. 4,325 litres Tank Type: Pressure Tank Condition: Used Food Grade: Yes Design: Vertical Internal Diameter: approx. 1,500 mm External Diameter: approx. 1,700 mm Cylindrical Height: approx. 2,000 mm Total Height: approx. 3,684 mm Weight: approx. 1,400 kg Specific Weight of Medium: 1.0 t/m³ Operating Pressure: Overpressure/Vacuum Ksdpfstv Rm Sex Aggedu Operating Pressure: -1/+6 bar Test Pressure: 7.5 bar Wall Thickness Bottom: approx. 8 mm Wall Thickness Top: approx. 12 mm Wall Thickness Shell / Cylinder: approx. 6 mm Ground Clearance: approx. 700 mm Operating Temperature: 150°C Material / Construction Inner Shell Material: V4A (1.4435) Double Jacket Material: V2A (1.4301) Feet Material: Stainless Steel External Surface: Mirror Polished, Ra

Būklė: naudotas, Šis sąrašas skirtas Grant Bio McFarland DEN-1 densitometrui. Prietaisas yra visiškai veikiantis ir paruoštas nedelsiam perdavimui. Kdodpfx Agjxup Nhegeu DEN-1 — tai kompaktiškas stalinis drumstumo/densitometrinis prietaisas, gaminamas Grant Bio (Grant Instruments dalis). Jis sukurtas daugiausia gyvybės mokslų ir mikrobiologijos taikymams, pavyzdžiui, ląstelių suspensijų (bakterijų, mielių) ar kitų kietųjų dalelių suspensijų drumstumui matuoti. Tipinės naudojimo sritys: - Ląstelių koncentracijos nustatymas fermentacijos ar kultūrinio auginimo procesuose - Mikrobų jautrumo vertinimas (pagal drumstumo pokyčius) - Mikroorganizmų identifikavimas testų sistemose - Optinio tankio / drumstumo matavimai pastoviu bangos ilgiu dažams ar suspensijoms

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 18,39 kW (25,00 AG), bendras svoris: 2 500 kg, kėlimo galia: 1 700 kg/m, Šis skelbimas skirtas tik informaciniams tikslams ir nelaikomas teisiniu pasiūlymu. FARMER 810 XL Kompaktiškas. Galingas. Profesionalus. Atsižvelgiant į mūsų klientų poreikius, pristatome naująjį FARMER 810 XL – didž. kėlimo galia ant tvirtinimo – 2000 kg, didž. kėlimo galia su padėklų šakėmis – 1900 kg. Tai puikus, manevringas įrenginys tiek privatiems klientams, tiek įmonėms! Įrenginys komplektuojamas su galingu 4 cilindrų KUBOTA varikliu, dviem važiavimo lygiais ir diferencialo blokavimu. Dėl svorio tinkamas transportuoti lengvuoju automobiliu ir priekaba iki 3,5 t – puikus pasirinkimas apželdinimo ir statybos įmonėms. ⸻ ⚠️ SVARBI GARANTIJOS INFORMACIJA GARANTIJA taikoma tik mašinoms, įsigytoms TIESIOGIAI iš mūsų – ne per kitus atstovus. ⸻ FACEBOOK GRUPĖ Kviečiame visus prisijungti prie mūsų Facebook grupės „KINGWAY Maschinen“. Ten informuojame apie naujus pasiūlymus ir padedame visais klausimais, susijusiais su mūsų technika. ⸻ ⚙️ TECHNINIAI DUOMENYS Gamintojas: KINGWAY DEUTSCHLAND e. K. Modelis: FARMER 810 XL • Uždara kabina su šildymu, ventiliacija • Kelių ir darbo apšvietimas • Galinio vaizdo kamera • Radijas • Amortizuota komforto sėdynė • Sunkios apkrovos ašys • Standartiškai komplektuojama su šakėmis ir kaušu ⸻ VARIKLIS • Variklis: KUBOTA V1505 dyzelinis • Cilindrų skaičius: 4 • Emisijos klasė: Euro 5 • Galia: 18,2 kW / 25 AG prie 2 800 aps./min. • Didž. sukimo momentas: 92,6 Nm prie 1 700 aps./min. • Aušinimo sistema: vandeniu aušinamas • Triukšmo lygis: 92 dB • Įtampa: 12 V • Akumuliatorius: 12 V / 60 Ah ⸻ ⚙️ PAVARA • Hidrostatinė pavara su kardanu • Bondioli-Pavesi siurblys • 2 važiavimo lygiai + diferencialo blokavimas • Greitis 1 lygis: 0–8 km/val. • Greitis 2 lygis: 8–20 km/val. ⸻ TALPOS IR SLĖGIAI • Kuro bakas: 40 l • Hidraulinės alyvos bakas: 50 l • Hidraulinės sistemos našumas: 46 l/min • Hidraulinis slėgis: 180 bar ⸻ ⚖️ SVORIS • Eksploatacinis svoris: 2 500 kg • Didž. apverčiamoji apkrova: 2 000 kg • Didž. kėlimo galia su padėklų šakėmis: 1 900 kg • Didž. kėlimo galia ant tvirtinimo: 2 000 kg ⸻ MATMENYS • Vairo pasukimo kampas: 42° • Posūkio spindulys vidinis/išorinis: 1 869 / 3 172 mm • Didž. kėlimo aukštis: 2 210 mm • Iškrovimo aukštis: 1 650 mm • Iškrovimo kampas: 45° • Kaušo talpa: 0,5 m³ • Ilgis: 3 500 mm be kaušo • Plotis: 1 490 mm • Aukštis: 2 320 mm ⸻ PADANGOS • Standartinės: 31x15.5-15 žemės ūkio protektorius ⸻ ⭐ YPATINGOS SAVYBĖS • Labai aukštos kokybės ir tvirtos konstrukcijos • EURO tvirtinimas (standartiškai) • Rakinama kabina, kuro bakas ir variklio gaubtas • Šildymas ir ventiliacija • Galinio vaizdo kamera • Radijo įranga • Erdvi komfortiška kabina • Labai manevringas ir kompaktiškas • Hidraulinė greitojo keitimo sistema • 3 ir 4 hidrauliniai ratai • Atitinka naujausius CE reikalavimus • Galimas pardavimas be PVM (turint PVM kodą) • Galimas FINANSAVIMAS ⸻ KOMPLEKTACIJA • Nemokamas pristatymas iki 200 km • FARMER 810 XL ratinis krautuvas • Kaušas + padėklų šakės (4in1 kaušas – pagal užklausą) • Hidraulinis greitojo keitimo įrenginys • Valdymas joystick'u • 4x4 visų ratų pavara • Leidimas važiuoti keliu (COC) • „Plaukimo“ padėtis • Eksploatacijos leidimas • Diferencialo blokavimas ⸻ PAPILDOMA ĮRANGA (PASIRENKAMA) • Prikabinimo galvutė • Papildomi svoriai • Sniego stumdytuvas, šluota • „Krokodilas“, griebtuvas Kdjdpeyk Edbefx Aggsu • Tūriniai kaušai • Darbo krepšys ⸻ KAINA 23.100 € be PVM 27.489 € su PVM

Būklė: naudotas, Plate width: 2500 mm Plate depth: 5100 mm Plate height: 400 mm Weight approx. 9 t Space requirement approx. 2.5 x 5.1 x 0.40 m Dimensions of T-slots: 36 x 60 mm – height: 61 mm Number of slots: 5 Slot pitch: 460 mm Edge distance: 220 mm Ksdshpva Djpfx Aggsdu Slot size: 36 mm

Gamybos metai: 2000, būklė: naudotas, Film packaging machine OMG Autofard Year of manufacture: 2000 Kjdeku H Aiopfx Aggedu Description: - Straight feed - Film unit - Shrink tunnel

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 33049, rida: 19 900 km, galia: 235 kW (319,51 AG), pirmoji registracija: 03/2025, kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 4x2, kuras: dyzelinas, spalva: oranžinė, vairuotojo kabina: dieninė kabina, pavaros tipas: mechaninis, emisijos klasė: Euro 6e, pakaba: plienas-oras, krovinio erdvės tūris: 10,5 m³, Įranga: ABS, elektroninė stabilumo programa (ESP), kruizo kontrolė, oro kondicionavimas, oro pagalvė, sunkvežimio registracija, sėdynės šildytuvas, trauki kontrolė, vairo stiprintuvas,

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 33051, rida: 23 900 km, galia: 235 kW (319,51 AG), pirmoji registracija: 02/2025, kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 4x2, kuras: dyzelinas, spalva: oranžinė, vairuotojo kabina: dieninė kabina, pavaros tipas: pusiau automatinis, emisijos klasė: Euro 6e, pakaba: plienas-oras, krovinio erdvės tūris: 11,6 m³, Įranga: ABS, elektroninė stabilumo programa (ESP), kruizo kontrolė, oro kondicionavimas, oro pagalvė, sunkvežimio registracija, sėdynės šildytuvas, trauki kontrolė, vairo stiprintuvas,