Smw Autoblok Rx4-Zsw pirkti naudotą (154)

Gamybos metai: 2025, būklė: naujas, VFFS machine with integrated free-fall metal detector for inspecting vertically falling products, equipped with a 14-head multihead weigher for bulk materials and granulates. Compact design without platform frame. Suitable for the production of pillow bags with back seam, gusseted stand-up pouches (gusset tool required) OR for pyramid-shaped bags (special sealing unit required). The vertical packaging machine is equipped with: touchscreen; PLC; photo sensor (print mark detection) for seal/cut position; servo-driven sealing unit for end sealing; servo motor for film pull-off; thermal transfer printer for batch number, date, and best-before date. - Multihead weigher specifications: Number of weighing heads: 14; weighing range (single dump): 10–1500g; volume per weighing head: 1.6L; weighing accuracy: X(0.5); discharge chute: single flap; surface finish: smooth (optional embossed surface); product contact parts made of: AISI 304 (optionally AISI 316 at extra cost). - Free-fall metal detector specifications: Sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to forming shoulder. - VFFS Machine specifications: Max. machine cycle rate idle: 65 cycles/minute; bag size: L(70-270)xW(70-270)mm (double film pull-off possible for longer bags); suitable film width: 160–560mm; product contact parts made of: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; required compressed air: 0.4–0.8MPa. Iajdpfov Nnb Ajx Alrsu Please note that our new prices are often below the usual prices for used equipment. Feel free to contact us and tell us about your packaging application. – We usually have 30–50 different new machines immediately available from stock. For custom-built machines, we also offer very short delivery times starting at about 3 weeks. – All machines are available with full warranty.

Būklė: naujas, Gamybos metai: 2025, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design without platform frame. Suitable for producing pillow bags with back seam, gusseted stand-up pouches (gusset tool required) OR for pyramid-shaped bags (special sealing unit required). The vertical form fill and seal machine is equipped with: touchscreen; PLC; photo sensor (print mark detection) for sealing/cutting position; pneumatic sealing unit for end sealing; servomotor for film pulling; thermal transfer printer for batch number, date, and best before date. - Multihead weigher specifications: Number of weighing heads: 10; weighing range (single discharge): 10-1500g; volume per weighing head: 1.6L; weighing accuracy: X(0.5); discharge gate: single flap; surface finish: smooth (optional dimpled surface); product-contact parts made of: AISI 304 (optional AISI 316 at extra cost). - VFFS machine specifications: max. machine cycle rate in idle: 60 cycles/minute; bag size: L(40-300)xW(60-220)mm (dual film draw-off possible for longer bags); suitable film width: 140-460mm; product-contact parts made of: AISI 304 (optional AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 4.1kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.6m³/min; dimensions (LxWxH): 1766*1246*2163 mm; weight: 786kg. Iedov Nm Uhepfx Alrsau

Būklė: naujas, Gamybos metai: 2025, VFFS machine with integrated free-fall metal detector for inspecting vertically falling products, and equipped with a 10-head multihead weigher for bulk materials and granulates. Compact design without a platform frame. Suitable for producing pillow bags with back seam, gusseted stand-up pouches (gusset tool required), OR pyramid-shaped bags (special sealing unit required). The vertical form fill seal machine features: touchscreen; PLC; photoelectric sensor (print mark detection) for sealing/cutting position; pneumatic end-sealing unit; servo-driven film transport; ribbon printer for batch number, date, and best-before date. Iodpfov Nnbvjx Alroau - Multihead weigher specifications: Number of weigh heads: 10; Weighing range (single dump): 10–1500g; Volume per weigh head: 1.6L; Weighing accuracy: X(0.5); Discharge gate: single flap; Surface finish: smooth (optionally dimpled surface); product-contacting parts: AISI 304 (optionally AISI 316 at extra cost). - Free-fall metal detector specifications: Sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to former. - VFFS machine specifications: max. cycles in idle mode: 65 cycles/min; bag size: L(40–350)xW(70–270)mm (double film feed for longer bags possible); suitable film width: 160–560mm; product-contacting parts: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; required compressed air: 0.4–0.8MPa. Please note that our new prices are frequently below the usual used prices. Feel free to inquire and let us know your specific packaging application. We always have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. All machines come with a full warranty.

Būklė: naujas, Gamybos metai: 2025, VFFS machine with 10-head multihead weigher for free-flowing products and granulates. Compact, space-saving design without a platform frame. Suitable for producing pillow bags with back seal, gusseted stand-up pouches (gusset tool required), OR pyramid-shaped bags (special sealing unit required). The vertical form fill and seal machine is equipped with: touchscreen, PLC, photoelectric sensor (print mark detection) for seal/cut positioning, pneumatic sealing unit for end sealing, servo motor-driven film transport, and thermal transfer printer for batch number, date, and best-before date. - Multihead Weigher Specifications: Number of weighing heads: 10; Weighing range (single discharge): 1~60g; Volume per head: 0.3L; Weighing accuracy: X(0.5); Discharge gate: single flap; Surface finish: smooth (optional knurled finish); Product-contacting parts made of AISI 304 (optionally AISI 316 at extra charge). - VFFS Machine Specifications: Max. machine cycle (no load): 65 cycles/min; Bag size: L(40-250) x W(50-170) mm (dual film draw-off for longer bags possible); Suitable film width: 120-360 mm; Product-contacting parts made of AISI 304 (optionally AISI 316 at extra charge); Power supply: 220V, 50/60Hz; Power consumption: 3.7kW; Required compressed air: 0.4-0.8MPa; Air consumption: 0.5m³/min; Dimensions (LxWxH): 1400*1320*2040 mm; Weight: 570kg. Please note that our prices for new equipment are often below the usual prices of used machines. Feel free to contact us and tell us about your packaging application. We typically have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times from around 3 weeks. All machines come with a full warranty. Iaedpfx Alsv Nm Twersu

Būklė: naujas, Gamybos metai: 2025, VFFS machine with 14-head multihead weigher for bulk materials and granulates. Compact design without a platform frame. Suitable for the production of pillow bags with back seam, gusseted stand-up pouches (gusset tool required), OR pyramid-shaped bags (special sealing unit required). The vertical form fill seal machine is equipped with: touchscreen; PLC; photoelectric sensor (registration mark detection) for sealing/cutting position; servo-driven sealing unit for end sealing; servo motor for film draw-off; thermal transfer printer for batch number, date, and best-before date. - Multihead Weigher Specifications: Number of heads: 14; Weighing range (single discharge): 10-1500g; Volume per head: 1.6L; Weighing accuracy: X(0.5); Discharge gate: single flap; Surface finish: smooth (knurled finish optional); Product-contact parts made of: AISI 304 (optional, AISI 316 at extra cost). Ijdpfx Aljv Nm Uusrjau - VFFS Machine Specifications: Max. machine cycling speed (idle): 80 cycles/min; Bag size: Length (40-300) x Width (60-220) mm (double film draw-off possible for longer bags); Suitable film width: 140-460 mm; Product-contact parts made of: AISI 304 (optional, AISI 316 at extra cost); Power supply: 220V, 50/60Hz; Power consumption: 4.9kW; Required compressed air: 0.4-0.8MPa; Compressed air consumption: 0.2m³/min; Dimensions (LxWxH): 1780*1260*2530mm; Weight: 856kg.

Būklė: naujas, Gamybos metai: 2025, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design without platform frame. Suitable for producing pillow bags with back seam, gusseted stand-up pouches (gusset tool required), OR pyramid-shaped bags (special sealing unit required). The vertical packaging machine is equipped with: touchscreen; PLC; photo sensor (print mark detection) for sealing/cutting position; pneumatic sealing unit for end sealing; servo motor for film pull-off; thermal transfer printer for batch number, date, expiry date. - Multihead weigher specifications: Number of weighing heads: 10; weighing range (single discharge): 10-1500g; volume per weighing head: 1.6L; weighing accuracy: X(0.5); discharge gate: single gate; surface finishing: smooth (optional: dimpled surface); product-contacting parts made of: AISI 304 (optional upgrade to AISI 316 for surcharge). Ijdpfsv Nm U Iox Alreau - VFFS machine specifications: max. machine cycle rate in idle: 60 cycles/minute; bag size: L(40-300)xW(70-270)mm (double film draw-off possible for longer bags); suitable film width: 160-560mm; product-contacting parts made of: AISI 304 (optional upgrade to AISI 316 for surcharge); power supply: 220V, 50/60Hz; power consumption: 4.5kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.2m³/min; dimensions (LxWxH): 2266*1416*2538mm; weight: 870kg.

Būklė: naujas, Gamybos metai: 2025, VFFS machine with integrated gravity metal detector for inspecting vertically falling products, featuring a 14-head multihead weigher for bulk materials and granulates. Compact design without a platform frame. Suitable for producing pillow bags with back seam, gusset stand-up pouches (gusset tool required) OR pyramid-shaped bags (special sealing unit required). The vertical form fill seal machine is equipped with: touchscreen; PLC; photo sensor (print mark detection) for sealing/cutting position; pneumatic end-sealing unit; servo drive for film pulling; thermal transfer coder for batch number, date, and best before date. Multihead Weigher Specifications: Number of weighing heads: 10; weighing range (single discharge): 2~200g; volume per head: 0.5L; weighing accuracy: X(0.5); discharge flap: single flap; surface finish: smooth (optional dimpled surface); product-contact parts made of AISI 304 (optionally AISI 316 at extra charge). Gravity Metal Detector Specifications: Sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to forming shoulder. VFFS Machine Specifications: max. cycles in idle mode: 65 cycles/min; bag size: L(40-300)xW(60-220)mm (double film draw-off possible for longer bags); suitable film width: 140-460mm; product-contact parts made of AISI 304 (optionally AISI 316 at extra charge); power supply: 220V, 50/60Hz; required compressed air: 0.4-0.8 MPa. Please note that our new machine prices are often below typical used machine prices. Feel free to inquire and let us know your packaging requirements. – We generally have 30-50 different new machines immediately available from stock. For machines tailored to customer specifications, we offer very short delivery times starting from approximately 3 weeks. – All machines are available with full warranty. Iodpfx Aov Nnbiolroau

Būklė: naujas, Gamybos metai: 2025, VFFS machine with integrated free-fall metal detector for inspecting vertically falling products, equipped with a 14-head multihead weigher suitable for bulk goods and granulates. Compact design without a platform frame. Suitable for producing pillow bags with back seal, gusseted stand-up pouches (gusset forming tool required), OR pyramid-shaped bags (special sealing unit required). The vertical form fill seal machine is equipped with: touchscreen; PLC; photo sensor (print mark detection) for sealing/cutting position; servo-controlled end seal unit; servo motor for film feeding; thermal transfer printer for batch number, date, expiration date. - Multihead weigher specifications: Number of weighing heads: 14; Weighing range (single dump): 2–200g; Volume per head: 0.5L; Weighing accuracy: X(0.5); Discharge gate: single gate; Surface finish: smooth (optional dimpled); Product-contact parts: AISI 304 (optional AISI 316 at extra cost). - Free-fall metal detector specifications: Sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; Pipe diameter: depending on forming shoulder. Isdpfx Alov Nnbpjrjau - VFFS machine specifications: Max. cycles in idle: 85 cycles/min; Bag size: L(40–300)xW(60–220)mm (double film draw-off possible for longer bags); Suitable film width: 140–460mm; Product-contact parts: AISI 304 (optional AISI 316 at extra cost); Power supply: 220V, 50/60Hz; Required compressed air: 0.4–0.8MPa. Please note that our new machine prices are often below typical used machine prices. Feel free to contact us and let us know your packaging requirements. Normally, 30–50 different new machines are available ex stock for immediate delivery. For made-to-order machines, we offer very short delivery times of about 3 weeks. All machines are available with full warranty.

Būklė: naujas, Gamybos metai: 2025, VFFS machine with 14-head multihead weigher for bulk solids and granulates. Compact design without platform frame. Suitable for producing pillow bags with back seam, gusset stand-up pouches (gusset tool required) OR pyramid-shaped bags (special sealing unit required). The vertical form fill seal machine is equipped with: touchscreen; PLC; photo sensor (print mark detection) for sealing and cutting position; servo-driven end-sealing unit; servo motor for film feed; ribbon printer for batch number, date, and best-before date. - Multihead Weigher Specifications: Number of weighing heads: 14; Weighing range (single discharge): 2~200g; Volume per weigh head: 0.5L; Weighing accuracy: X(0.5); Discharge chute: single flap; Surface finish: smooth (optional dimpled finish); Product-contact parts material: AISI 304 stainless steel (AISI 316 optional at extra cost). - VFFS Machine Specifications: Max. machine cycle rate (idle): 85 cycles/min; Bag size: L(40-250)xW(50-170)mm (dual film draw available for longer bags); Suitable film width: 120-360mm; Product-contact parts material: AISI 304 stainless steel (AISI 316 optional at extra cost); Power supply: 220V, 50/60Hz; Power consumption: 4.5kW; Required compressed air: 0.4-0.8MPa; Air consumption: 0.15m³/min; Dimensions (LxWxH): 1400*1320*2040mm; Weight: 600kg. Iedpfxsv Nm Ubj Alreau Please note that our new prices are frequently below typical used machine prices. Feel free to contact us and let us know your packaging requirements. We generally have 30-50 different new machines available ex stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. All machines come with full warranty.

Būklė: naujas, Gamybos metai: 2025, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design without a platform frame. Suitable for producing pillow bags with back seam, gusseted stand-up pouches (gusset tool required), OR for pyramid-shaped bags (special sealing unit required). The VFFS machine operates in an inclined position to protect fragile products such as thin frozen foods or bakery goods. The vertical form fill seal machine is equipped with: touchscreen; PLC; photoelectric sensor (print mark detection) for sealing/cutting position; pneumatic sealing unit for end-sealing; servo motor for film transport; thermal transfer printer for batch number, date, best-before date. - Multihead weigher specifications: Number of weighing heads: 10; weighing range (single discharge): 10~1000g; volume per head: 1.6L; weighing accuracy: X(0.5); discharge chute: single flap; surface finish: smooth (optional dimpled surface); product-contact parts made of: AISI 304 (optionally AISI 316 at extra charge). - VFFS machine specifications: Max. machine cycle rate idle: 50 cycles/min; bag size: L(40-300)xW(60-220)mm (dual film feed for longer bags possible); suitable film width: 140-460mm; product-contact parts made of: AISI 304 (optionally AISI 316 at extra charge); power supply: 220V, 50/60Hz; power consumption: 4.1kW; required compressed air: 0.4-0.8MPa; air consumption: 0.6m³/min; dimensions (LxWxH): 2216*1216*2428mm; weight: 750kg. Isdpfx Aev Nna Eelrjau Please note that our new prices are often lower than typical used machine prices. Feel free to contact us and let us know your packaging requirements. – We generally have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we also offer very short delivery times from around 3 weeks. – All machines are available with full warranty.

Būklė: naujas, Gamybos metai: 2025, VFFS machine with integrated gravity metal detector for inspecting vertically falling products and equipped with a 10-head multihead weigher for bulk materials and granulates. Compact design without platform frame. Suitable for the production of pillow bags with back seal, gusset stand-up pouches (gusset tool required) OR pyramid-shaped bags (special sealing unit required). The vertical form fill seal machine is equipped with: touchscreen; PLC; photo sensor (registration mark detection) for sealing/cutting position; pneumatic sealing unit for end sealing; servomotor for film transport; thermal transfer printer for batch number, date, and best-before date. - Multihead weigher specifications: Number of weighing heads: 10; Weighing range (single discharge): 1~60g; Volume per weighing head: 0.3L; Weighing accuracy: X(0.5); Discharge gate: single flap; Surface finish: smooth (optional embossed surface); Product-contact parts made of AISI 304 (optionally AISI 316 at extra cost). - Free-fall metal detector specifications: Sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; Tube diameter: according to the forming collar. Isdpfx Alsv Nna Serjau - VFFS machine specifications: Max. machine cycle rate (idle): 65 cycles/min; Bag size: L(40-250)xW(50-170)mm (double film feed for longer bags possible); Suitable film width: 120-360mm; Product-contact parts made of AISI 304 (optionally AISI 316 at extra cost); Power supply: 220V, 50/60Hz; Required compressed air: 0.4-0.8MPa. Please note that our new prices are often below the usual prices for used equipment. Feel free to contact us and let us know your packaging requirements. – We generally have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. – All machines are available with full warranty.

Gamybos metai: 2013, būklė: naudotas, Drying chamber with intermediate ceiling ventilation and front-end loading by trolley for production and conditioning of 3 mm oak lamellae, with initial moisture 12 to max. 15% / final moisture 7% Used, in good condition Manufacturer: Mühlböck Model: ZSWM2110-1180C – 1.0 l/h at 40°C above 30% RH Year of manufacture: 2013 Rated power: 7 kW / 15A Frequency: 50 Hz Control voltage: 24VDC / 230VAC Protection class: IP54 Capacity: The chamber holds: - 2 packs widthwise at 1.10 m each – with 0.20 m spacing between - 1 pack in height at 1.80 m – with 0.10 m thick base timbers and 0.10 m free space - 2 packs in length at 2.20 m each – plus 0.60 m free space The chamber contains 4 stack packs and has a gross total volume of 17.4 m² The net capacity is 4 m³ of wood – based on a wood thickness of 3 mm and stacking batten thickness of 10 mm, as well as 90% width utilization for trimmed wood. Usable dimensions per chamber: width 2.40 m x height 2.30 m x length 5.00 m - Aluminum cassette construction - Aluminum frame - Dimensionally stable rock wool insulation - Aluminum trapezoidal sheeting - Snow load 100 kg/m² - Double-leaf swing gate - Front-end loading - 2 fans, each 3 kW (D=800 mm) - Stainless steel/aluminum finned tube heater register, 50 kW, flow temperature 80°C, return temperature 73°C - Servo-controlled supply and exhaust air dampers - Cold water spraying system - Chambers run fully automatically - Computer control system K5 Dismantling: at customer’s site Handover in as-seen/where-is condition Ijdpfx Alsvwfhijroau without warranty or guarantee

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, tuščias svoris: 4 kg, OVP, be jokios garantijos Iaodpfx Aoyftbwslrsu

Būklė: labai geros būklės (naudotas), Ulma HRX-400 šilumos tunelis. Iajdjywi E Rjpfx Alrou

Gamybos metai: 2022, būklė: naujas, 1 x Niro-Tech dviejų sistemų dvivelenis mentinis maišytuvas. Iajdehq Rgpspfx Alrou Modelis – RX-400. Talpa – 400 litrų. Maksimalus produkto užpildymas – 320 kg. Įrengtos galios – 3 kW. Elektros tiekimas – 400 V, 50 Hz, 3 fazės. Rankinio užpildymo sklendė su magnetiniu jutikliu. Pagamintas iš AISI 304 nerūdijančio plieno. Visiškai naujas, gaminamas pagal užsakymą. Suteikiama 12 mėnesių garantija. Prašome numatyti iki 6 savaičių gamybos laikotarpį šiai mašinai pagaminti.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, veikimo valandos: 19 990 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 2 100 mm, tekėjimo skersmuo: 560 mm, ašies variklio galia: 37 000 W, veleno greitis (maks.): 2 000 aps./min, veleno skylė: 117 mm, X ašies eiga: 320 mm, Z ašies eigos atstumas: 2 200 mm, greitas poslinkis X ašimi: 20 m/min, greitasis eiga Z ašyje: 20 m/min, bendras svoris: 11 000 kg, Hyundai WIA L400LMC – Schwerlast-Drehzentrum mit langem Bett Das Hyundai WIA L400LMC ist ein robustes und leistungsstarkes Drehzentrum, das speziell für die Bearbeitung großer und schwerer Werkstücke mit hoher Stabilität und Präzision entwickelt wurde. Dank der kraftvollen Hochdrehmoment-Spindel, großen Bearbeitungskapazität sowie der integrierten Automatisierungs- und Schnittstellenoptionen ist diese Maschine optimal für anspruchsvolle industrielle Anwendungen ausgelegt. Ausführung mit Flachführungen – die steifste Lösung, die bei Drehzentren zum Einsatz kommt. Wesentliche technische Daten: • Hauptspindelleistung: 37 kW • Maximales Drehmoment: 3.073 Nm • Max. Spindeldrehzahl: 2.000 min⁻¹ Iaedpfoy T Ixbox Alrsu • Max. Drehlänge: 2.100 mm • Spannfuttergröße: 15” • Max. Stangendurchlass: Ø117 mm Maschinenkonfiguration: • 12-fach Revolver mit BMT75-Anbindung • C-Achse für komplexe Bearbeitungsoperationen • Hochdruck-Innenkühlung (15 bar) • Schnittstelle für Stangenlader • Automatisches Werkzeug-Vermesssystem Q-SETTER • Steuerung: FANUC • Hydraulische Lünette, programmierbar über M-Funktion • Große, programmierbare Reitstockeinheit, steuerbar über M-Funktion • Kühlschmierstoff-Spritzpistole • Großzügige Maschinentüröffnung (>2.000 mm) für einfaches Be- und Entladen von Großteilen • Ölnebel- / Emulsions-Absaugung Im Lieferumfang enthaltenes Zubehör: • 4 angetriebene Werkzeuge im Lieferumfang • SMW-Autoblok SLUB-5-ZS-050310 selbstzentrierende Lünette o Überwachung der Offen-/Geschlossen-Position o Spannbereich: 50–310 mm Die Maschine wurde 2020 in Betrieb genommen und befindet sich im regelmäßigen Industrieeinsatz. Die Ausstattung ist in gutem betriebsfähigem Zustand und stellt eine leistungsstarke Lösung für schwere Drehbearbeitungen mit hohem Drehmoment und langer Werkstückkapazität dar.

Būklė: naudotas, Gamybos metai: 2006, Turning diameter: 650 mm Isdpfx Alszacb Ajrjau Turning length: 1,500 mm Total power requirement: 33 kW Centre distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in gap: 670 mm Swing diameter over cross slide: 260 mm Cross slide travel: 380 mm Main drive Drive power AC motor - 40/60 /100 % duty cycle: 33 / 27 / 22 kW Headstock Spindle bore diameter: 106 mm Spindle front bearing diameter: 140 mm Speed range (constant V): 1 - 2,000 rpm Cross slide Transverse feed range: 0.001 - 1,000 mm/rev Transverse feed range, optional up to: 5,000 mm/rev Longitudinal feed & thread pitch range: 0.001 - 2,000 mm/rev Longitudinal feed & thread pitch range, optional up to: 13,000 mm/rev Transverse feed force: 9,000 N Longitudinal feed force: 12,000 N Automatic turret Number of tool stations: 12 with driven tool capability for 6 stations Tool holding system (DIN69880) VDI40 Equipment SIEMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI operator panel C-axis with drilling, milling, and engraving cycles Remnant material detection and processing – during roughing and pocket contouring MULTIFIX C front-mounted Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil-emulsion mist extractor for machining area: MAHLE LTA600

Būklė: naudotas, Gamybos metai: 2010, Technical Details: Spindle bore: 92 mm Turning length: 1000 mm Z-axis: min.: 404 mm Isdpfx Alswf Nraorsau Z-axis: max.: 1130 mm Cross slide travel (X-axis): min./max.: 15 / 335 mm Control unit: Sinumerik SL840D Spindle torque: 2500 Nm Tool turret: 12 axial tools Operating pressure: 6.0 bar Rapid traverse: 20 m/min Total power requirement: 88 kVA Approx. machine dimensions (LxWxH): approx. 4.45 x m Bar loader magazine dimensions (L-W-H): approx. L: 5.7 x W: 2.65 x H: 2.4 m Lathe with bar loader - Control unit SL 840D with NCU software 2.6, system software 1.4, ShopTurn software 6.4, with orientable C-axis, without driven tools - Clamping chuck KNCS 260-72, SMW Autoblok - Clamping force generated via clamping cylinder VNK-200/86 / SMW Autoblok - Measuring system by Heidenhain - Tool disk turret Sauter VDI50, electric drive Bar loader Master 80HF, Type 33LL: - Round material dimensions min./max.: Ø 20mm / 80mm - Minimum workpiece length: 33-38-43 up to 1000mm - Maximum workpiece length: 33 - 3300mm / 38 - 3800mm / 43 - 4300mm - Feed rate (adjustable) 150mm/sec. - Return rate (adjustable) 950mm/sec. - Max. remnant length: Ø 8+65mm = 400mm / Ø 66+80mm = 250mm - Min. remnant 120mm Chip conveyor/hinged belt by Richter, Type SP 450/63 - Discharge height = 1000mm, discharge side right Accessories: - Various tool holders VDI 50 - Measuring adapter SK50 > VDI 50 - Power chuck Hainbuch Toplus Kombi Axial-pull GR100 - Various sleeves, guide jaws for bar loader Ø 20 - 75mm internal diameter

Būklė: naudotas, CNC Lathe TRAUB Type TND 400 Serial No. 708 Year of manufacture: 1996 CNC Control TRAUB TX 8 F Nominal turning diameter: 400 mm Swing diameter over bed max. 470 mm Spindle bore in draw tube: 65 mm Spindle drive motor power: 22 kW Total power requirement: 35 kW Mains connection: 380 Volt, 50 Hz Ijdpfxszacwdj Alreau - Electronic handwheel - RS 232 data interface - Disc turret with 12 tool stations VDI 40 - 8 tool holders VDI 40 included - 3-jaw power chuck Ø 225 mm SMW Autoblok, Type KNCS-N- Ø 225-65 plus a large set of chuck jaws - Hydraulic hollow clamping cylinder SMW, Type ZHDAS-130-67 - Chip conveyor KNOLL, Type 200 S-1/600 - Coolant unit - Separate hydraulic power unit (L x W x H 650 x 500 x 1000 mm) Required space (L x W x H): 4800 x 2000 x 2100 mm Main machine footprint (L x W x H): 3500 x 2000 x 2100 mm Chip conveyor footprint (L x W x H): 4500 x 700 x 1550 mm Weight approx. 5 tons. Good condition Machine is ready for demonstration. Hollow clamping cylinder for workpiece clamping needs to be overhauled.

Gamybos metai: 2013, būklė: naudotas, valdiklių gamintojas: Siemens, valdiklio modelis: 840Dsl, Aprašymas: Iasdpfx Alsx E Ingjrju Bendrai: Gręžimo skersmuo (maks.): 3,5 mm Gręžimo gylis (maks.): 200 mm Giluminio gręžimo modulis: Technologija: Gręžimo velenas Sukimosi greitis (maks.): 10 000 aps./min Galia: 3,5 kW Įrankio tvirtinimas: HSK-A40 Įranga / priedai: Drožlių valdymas: Drožlių dėklas Aušinimo skysčio valdymas: Vidaus aušinimas aukštu slėgiu ir filtru, 140 bar Ruoinio tvirtinimas: Tvirtinimo griebtuvėlis, SMW Autoblok KSZ-MB-040-Z140 Alyvos rūko ištraukimas: Elektrostatinis separatorius, LTA AC 500 Kiti priedai: Įvairūs vienbriauniai grąžtai

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, ašies variklio galia: 5 500 W, veleno greitis (maks.): 6 000 aps./min, Strypo skersmuo (maks.): 47 mm, bendras plotis: 1 650 mm, bendras aukštis: 2 300 mm, X ašies eiga: 130 mm, bendras svoris: 3 500 kg, valdiklių gamintojas: FANUC, valdiklio modelis: 31i-TA, gaminio ilgis (maks.): 1 550 mm, ašių skaičius: 4, Šios keturių ašių Muratec MW 100 GT daugiasvirtės tekinimo staklės buvo pagamintos 2012 m. Jos didžiausias tekinimo skersmuo yra 168 mm, o tekinimo ilgis - 145 mm. Staklėse įrengti du bokšteliai, kiekviename iš jų yra po 8 stotis, ir portalinis krautuvas, užtikrinantis efektyvų darbą. Jei norite gauti aukštos kokybės tekinimo galimybes, apsvarstykite mūsų parduodamas "Muratec MW 100 GT" stakles. Susisiekite su mumis dėl išsamesnės informacijos. • Valdymo modelis: FANUC 31i-TA • Atstumas tarp verpstukų: Atstumas tarp suktuvų: 340 mm • Didžiausias. Svyravimo skersmuo: 295 mm • Didžiausias. Apsisukimo skersmuo: 168 mm • Didžiausias. Tekinimo ilgis: 145 mm • Suklio antgalis: JIS A2-5 • Didž. Griebtuvo skersmuo: 165 mm (6") • Suklio guolio vidinis skersmuo: 80 mm • Greita eiga X ašimi: 24 m/min • Greita Z ašies slinktis: 24 m/min • Bokštelių skaičius: 2 • Replės stotys: 2: 8 • Įrankių koto dydis: 20 x 20 mm • Didž. Gręžimo skersmuo: 40 mm • Bėgių bokštelio indekso laikas: 0,2 sek. • Didž. Ruošinio skersmuo: 80 mm • Didž. Detalės ilgis: 60 mm • Žandikaulių eigos skersmuo: 12 mm • Didžiausias. Ruošinio svoris (vienai rankai): 2,0 kg • Standartinė krovimo trukmė: 4,5 sek. • Minimali apdirbimo trukmė: 16 sek. • Krautuvo X ašies eiga: 1 420 + 1 420 mm • Krautuvo Y ašies eiga: 435 mm • Krautuvo Z ašies eiga: 135 mm • Krautuvo rankinio pasukimo diapazonas (Alfa ašis): 180° • Krautuvo rankos pasukimo greitis: 0,4 s / 180° • Greita krautuvo X ašies slinktis: 150 m/min • Greita krautuvo Y ašies slinktis: 120 m/min • Greitaeigis krautuvo Z ašis: 55 m/min • Padėklų talpa: 14 • Max. Stelažų krovimo aukštis: 450 mm • Ruošinio skersmens diapazonas: 30-160 mm • Didž. Vienos paletės ruošinio svoris: 40 kg. • Mašinos plotas (su priedais): 3 300 x 2 380 mm • Prijungta apkrova: 30 kVA • Portalo krautuvo sistemos: 2 • Patikrinimo dalių latakai: 2 • Hidrauliniai galios griebtuvai: 2 x SMW Autoblok BHM 165, 6" • Hidraulinis cilindras (kairysis): SMW SIN-S 100 • Hidraulinis cilindras (dešinysis): HIDRAULINIS HIDRAULINIS MECHANIZMAS: SMW VNK 70/37 • Oru valdomas ruošinio buvimo vietos stebėjimas: Taip • Detalės prispaudimo stebėjimas: Abi pusės • Suklio orientacijos padėtys: 4 (iš abiejų pusių) • Aušinimo skysčio tiekimas per griebtuvą: iš abiejų pusių • Automatinio aušinimo skysčio siurblio talpa: 200 l • 8 padėčių bokšteliai: 2 • Signalinio bokštelio šviesa: Taip • Alyvos rūko ištraukimo paruošimas: Taip • Automatinis mašinos sustabdymas: Taip • Automatinis centrinis tepimas: Taip • RS232C sąsaja: Taip • Išorinis transformatorius: Taip Iedpfx Aszb It Helroau Pasirinktinai: • Portalo krautuvo tipas: 3 ašių portalinis krautuvas • Skaldos transporteris Technical Specification Counter Spindle Yes Driven Tools No

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, veikimo valandos: 1 559 h, veleno greitis (maks.): 4 500 aps./min, X ašies eiga: 120 mm, Z ašies eigos atstumas: 280 mm, ašies variklio galia: 5 500 W, bendras aukštis: 1 700 mm, bendras plotis: 1 370 mm, bendras svoris: 2 300 kg, valdiklių gamintojas: FANUC, valdiklio modelis: Series 0i-TF Plus with 10.4" Touch Display, gaminio ilgis (maks.): 1 360 mm, ašių skaičius: 2, Šis Takamaz XT 6 buvo pagamintas 2020 m. Jo didžiausias sukimo skersmuo Ø180 mm, o didžiausias sukimo ilgis - 240 mm. Jei norite įsigyti aukštos kokybės tekinimo pajėgumų, apsvarstykite mūsų parduodamas "Takamaz XT 6" horizontalias tekinimo stakles. Susisiekite su mumis dėl išsamesnės informacijos. - Didžiausias sukimo skersmuo: Ø180 mm- Didžiausias tekinimo ilgis: 240 mm (priklausomai nuo prispaudimo įtaiso)- Greita eiga (X / Z): 18 / 24 m/min- Didžiausias suklio sukimo momentas: 63,6 Nm- Suklio guolio vidinis skersmuo: Ø75 mm- Suklio antgalis: A2-5 trumpas kūgis- Didžiausia strypo talpa: 35 mm- Didžiausias griebtuvo dydis: 203 mm (8 coliai)- Suklio centro aukštis virš grindų: 950 mm- Įrankių bokštelis: (tiesioginis montavimas / gręžimo kasetės)- Išorinio tekinimo koto aukštis: 20 x 20 mm- Didžiausias ištekinimo strypų koto skersmuo: 25 mm- Pagrindiniai staklių matmenys (pėdos plotas be priedų / transformatoriaus): 1 360 x 1 370 mm.- Bendrasis aukštis su krautuvu: 1,700 mm (su krautuvu)- Maitinimo jungtis / maitinimas: 18 kVA / AC200V, 3 fazės, 50/60 Hz- Vardinė galia (vardinė lentelė): Įrašas (maitinimo galia (vardinis): 13,0 kVA- Visiškos apkrovos srovė: 36 A- Pertraukimo / trumpojo jungimo vardinė vertė: 2,5 kA- Darbo valandos (nuo 2026/05/22 08:51:21):- Valdymo įjungimo laikas: 4525 val.- Veikimo ir (arba) važiavimo laikas: 1975 val.- Apdorojimo laikas: 1559 val.- Laisvo naudojimo laikas: 1733 val.- Bendras dalių skaičius: 25 600 vienetų- Detalių skaitiklis: 21 801 vnt.- Įtraukta automatizavimo įranga:- Fanuc Compact Loader FC60 (2 ašių servo krautuvas su dviem lygiagrečiais pneumatiniais griebtuvais, maksimalus detalės skersmuo 60 mm, maksimalus vienos rankos svoris 1,0 kg, 90° pneumatinis pakreipimo įrenginys)- Integruotas detalių tiekimo konvejeris (ilgis 800 mm)- Integruota detalių išvežimo konvejerio juosta (ilgis 600 mm)- Papildoma įranga, neįtraukta į komplektą:- drožlių transporteris- Sustiprintas aukšto slėgio aušinimo skysčio siurblys- Maitinimo griebtuvas- Įrankių laikikliai- Hidraulinis maitinimo blokas- SMW-Autoblok VNK 70-37 hidraulinis tuščiaviduris prispaudimo cilindras- Pilna aušinimo skysčio sistema su standartiniu siurbliu- Niveliavimo elementai / lyginimo plokštės- Valdymo spinta su ventiliatoriumi- Elektros transformatorius Technical Specification Counter Spindle No Iedezb H T Eepfx Alrsau Driven Tools No

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 710 mm, tekėjimo skersmuo: 710 mm, ašies variklio galia: 11 000 W, veleno greitis (min.): 38 aps./min, veleno greitis (maks.): 3 800 aps./min, X ašies eiga: 690 mm, Y ašies eiga: 115 mm, Z ašies eigos atstumas: 1 545 mm, greitas poslinkis X ašimi: 4 m/min, greitas poslinkis Y ašis: 26 m/min, greitasis eiga Z ašyje: 40 m/min, sukimosi greitis (maks.): 6 000 aps./min, įvesties srovės tipas: trifazis, veleno nosis: JIS A2-8, bendras svoris: 14 000 kg, įrankio ilgis: 300 mm, įrankio svoris: 10 g, W ašies eiga: 1 550 mm, Įranga: dokumentacija / vadovas, Dreh-Fräszentrum OKUMA Multus B400 TECHNISCHE DATEN: CNC-Steuerung: OSP-P200L Spitzenweite: 1500 mm Max. Drehdurchmesser: 710 mm Spitzenhöhe über Bett: 710 mm Verfahrweg X-Achse: 690 mm Verfahrweg Y-Achse: -115 / +115 mm Verfahrweg Z-Achse: 1545 mm Verfahrweg W-Achse: 1550 mm B-Achse Indexiergenauigkeit: 0,001° Max. Drehzahl Fräskopf: 6000 U/min Max. Antriebsleistung Frässpindel: 11 kW Max. Drehmoment Frässpindel: 65,7 Nm Fräskopfkühlung: HSK-A63 Werkzeugmagazinkapazität: 40 Max. Werkzeuglänge: 300 mm Max. Werkzeugdurchmesser: 130 mm Max. Werkzeuggewicht: 10 kg Eilgang X-Achse: 4000 mm/min Eilgang Z-Achse: 40.000 mm/min Eilgang Y-Achse: 26.000 mm/min Eilgang W-Achse: 12.000 mm/min Spindelaufnahme: JIS A2-8 Min. Spindeldrehzahl: 38 U/min Max. Spindeldrehzahl: 3.800 U/min C-Achsen-Indexierung: 0,001° Versorgungsspannung: 400 V Maschinengewicht: 14.000 kg Ijdpfx Aoyqx Rzjlroau ZUBEHÖR: 1 × One-Touch IGF-Softwareoption 1 × ATLING Zweipunkt-Lünette, Typ AX8I-NAOS (Ø85–360 mm) 1 × SMW AUTOBLOK 3-Backenfutter Ø340 mm, Typ KNCS-N-340-117 1 × Spannkraftregler für Futter 1 × Werkstückabnahmer 1 × NC-Reitstock 1 × MARPOSS T18 Werkzeugmesssystem 1 × Elektronisches Handrad 40 × HSK-63 Werkzeugaufnahmen 1 × 2-farbige Status-Signalleuchte 1 × Späneförderer 1 × Kühlmitteltank 1 × Transformator 1 × Komplettes Satz Handbücher + OKUMA CD Die Maschine kann nach Terminvereinbarung unter Strom besichtigt werden. Preis auf Anfrage, Verladung auf LKW im Preis inbegriffen. Weltweiter Versand möglich. Alle Angaben nach bestem Wissen – Genauigkeit ohne Gewähr. Vergleichbar mit Maschinen von Herstellern wie Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron und Biglia. Umfasst ebenfalls Drehmaschinen, Dreh-Fräszentren und Fräsmaschinen.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, tekėjimo ilgis: 1 545 mm, sukimosi skersmuo virš skersinio stumduko: 660 mm, veleno skylė: 65 mm, X ašies eiga: 580 mm, Y ašies eiga: 160 mm, Z ašies eigos atstumas: 1 545 mm, Manufacturer: MAZAK Model: INTEGREX 200-4 ST Control: MAZATROL MATRIX Iaedpfx Asx S Hm Ijlrsu Year of manufacture: 2007 Multitasking machining in a single setup Sub-spindle for part transfer with full C-axis capability The INTEGREX-IV series can perform all machining processes completely High-speed milling spindle with swiveling function up to 240° Lower turret with driven tool spindle (live tooling) Chip conveyor with coolant system and 15-bar through-spindle coolant (IKZ) Double jaw chuck KNCS-N 210-53 (SMW Autoblok) MAZAK Flex-GL150F gantry loader Grip range: 200 × 120 mm (length) / 15 kg Max. turning diameter: 660 mm X-axis travel: 580 mm Y-axis travel: 160 mm Z-axis travel: 1545 mm B-axis swivel: 270° Spindle bore: 65 mm Spindle speed: 5000 rpm Spindle power: 22 kW Sub-spindle speed: 5000 rpm Sub-spindle through-hole: 65 mm Sub-spindle power: 18.5 kW Tool magazine: 40 positions B-axis interface: Capto C6 B-axis spindle speed: 12,000 rpm Length: 5200 mm Width: 2550 mm Height: 2600 mm Weight: 14,000 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, We offer you: Manufacturer: DMG MORI Model: CLX 450 TC Year of Manufacture: 2022 Control: Celos with Siemens 840D sl Operate Technical Data: Max. turning diameter: 400 mm Turning length: 1100 mm Bar capacity: max. 65 mm Travel Paths: X-axis travel: 276 mm Z1-axis travel: 755 mm Z3-axis travel: 775 mm Iaedpfxoy Hfpws Alrou Y-axis travel: +/- 100 mm B-axis travel: +/- 120° Main Spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Counter Spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Milling Spindle: Speed: 0 – 12,000 rpm Drive power: 8.8/10.5 kW Tool holder: HSK-A 63 Tool changer: 60 positions Max. torque: 73/90 Nm Hollow clamping device: Ø 67 mm Technical Features & Accessories: - Absolute, direct measuring systems on X and Y axes - Double switch filter - DMG Mori IoT connector - Dynamic dual-pressure clamping for main and counter spindle - Three-jaw power chuck, SMW Autoblok for main and counter spindle - Tailstock function for counter spindle including foot switch - Hinged belt chip conveyor including coolant tank - Coolant system 8 / 20 bar, consisting of: - Coolant tank 600 l - Belt filter system - Lifting pump - Mechanical oil mist separator - Chuck wash system for main and counter spindle - Coolant supply through the counter spindle - Coolant spray gun - Window cleaning system for safety glass - Workpiece probe RMP40, Renishaw - Tool probe Z-Nano, Blum - MPC (Machine Protection Control) - Measuring system for Z1-axis - Automatic work area door, electric - Electrical interface for Robo2Go, including: - Additional compressed air connection - Additional Ethernet interface - Power supply for the robot via the machine - Bar machining package Ø67 mm, including: - Max. bar diameter Ø67 mm - Workpiece collection unit with leftward conveyor belt for parts up to Ø80 mm x 200 mm, max. workpiece weight 6 kg - Pneumatic ejector for counter spindle - Interface for bar feeder or bar loader magazine - Tropical package - Signal provision for operating data acquisition device - Electronic handwheel - Inputs & outputs controllable via M function - Expansion of tool data and tool corrections to 3000 - Off-center turning and milling operations - Complete machining of shaft parts - Technology cycle for alternating spindle speed - Multi-thread cycle 2.0 - Technology cycle with dialog-guided programming - Technology cycle for parting off the workpiece Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to technical changes, errors and prior sale!