Europress Umwelttechnik Balu Presas pirkti naudotą (7 757)

Būklė: geras (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Baler Presona LP 85 VH2 with cross-tie, year of manufacture 2018 Technical Data: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours approx. 22,000 Pre-press force: 28 t Main press force: 85 t Blsdpfx Ajyz Snpokusi Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical throughput volume: 1200 m³/h Throughput rate at 30-100 kg/m³: 13-30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank volume: 2,000 L Transport dimensions (press): 10,400 x 2,400 x 2,800 mm (LxWxH) Weight approx. 27,000 kg The press was dismantled from ongoing operation. Technical documentation is available. Please note: All technical data is based on the manufacturer's information. We do not assume liability for the accuracy of the information provided or for possible errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is made on advance payment ex works, without warranty or guarantee.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 2 t, kamuolio ilgis: 1 200 mm, ryšulio plotis: 500 mm, ryšulio aukštis: 400 mm, balo svoris: 100 kg, bendras svoris: 1 820 kg, Tai visiškai automatinė presavimo mašina, surišanti ryšulius dviem plieninėmis vielomis (2,2 mm skersmens). Ventiliatorius per specialius 100 mm skersmens vamzdžius įpučia makulatūrą į įrenginį. Į kainą įskaičiuotas ventiliatorius ir apie 10 metrų ilgio vamzdis. Mašina veikianti, galima išbandyti. Parduodama dėl nenaudojimo; idealiai tinka spaustuvių ir higienos gaminių makulatūros presavimui. Bledpfx Akjy Ic Rueuji

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, For sale is an ANIS ATS 110-75S-9CT-30kW baler including cross-wiring (9-fold binding). The baler is in good technical condition and was only used sporadically. DIMENSIONS OF THE BALER -Total length: 9700 mm -Total width: 3700 mm -Transport width: 2300 mm -Height including feed hopper: 3640 mm -Total weight approx.: 24 t -Floor load approx. 5 kg/cm² -Heaviest part of the machine weighs approx. 6 tons FEED HOPPER OPENING -Length: 1600 mm -Width: 1200 mm -Inspection door (glass) PRESS CHAMBER -Stroke length of the ram: 2600 mm -W x H: 1100 x 770 mm -Volume: 2.2 m³ -The ram runs on heavy-duty rollers and is equipped with knives for cutting off residual material. Bodey Ayiqjpfx Akueli -The pressure on the press chamber (channel) is provided by two side-mounted cylinders and a simple lever system, allowing for an even and uniform force distribution. HYDRAULIC EQUIPMENT -Siemens electric motor 4-pole 400V-50Hz 30 kW -Hydraulic pump (Bucher) Const./Peak 320 / 400 bar -Max. working pressure: 290 bar -Denison hydraulic valves 24 VDC -Pressure control with proportional valve cycle -Automatic oil temperature monitoring -Automatic oil filter monitoring -Automatic oil level monitoring -Oil quantity: 600 L -Pressing force max.: 740 kN / 74 t -Specific pressure: 87 N/cm² SYSTEM THROUGHPUT -Volume per cycle including pre-compaction: 1.76 m³ -Average duration per press cycle approx. 40+8 sec. -Duration per press cycle without material 22+8 sec. -Tying time 30 sec. -Theoretical volume without tying 1.84 m³/h -Average operating volume 123 m³/h -Capacity at material density 30 kg/m³: 3-4 t/h BALES -Bale length: 500 - 2000 mm -Bale width: 1100 mm -Bale height: 770 mm

Būklė: paruoštas naudoti (naudotas), HSM V-Press 860 baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressure: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Feed opening (W x H): 1195 x 650 mm Bale size (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Consumable type: Wire Compacted materials: Film, mixed paper, cardboard, punching waste, textiles, Big Bags, polystyrene Bsdpfxera Rbgo Akueli HSM V-Press 860 Plus, 2013-2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 Plus, year 2019, price: €9,000 HSM V-Press 860 Plus, year 2024, price: €10,000 HSM V-Press 860, new demo unit, year 2020, price: €13,000 4-fold bale wire-tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (kg): approx. 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Feed opening (mm): 1200 x 565 Cycle time (s): 35 Pressing force (t): 54 Electric supply (V): 400 (three-phase) HSM V-Press 860 Plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/frequency: 400 V / 50 Hz Power: 4 kW Feed opening (W x H): 1500 x 651 mm Bale size (L x W x H): 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: Manual Dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Consumable type: Wire Compacted materials: Film, cardboard Idle cycle time: 25 s

Būklė: dilaminuotas dirbtuvėje (naudotas), kamuolio ilgis: 1 200 mm, ryšulio plotis: 700 mm, ryšulio aukštis: 800 mm, balo svoris: 380 kg, Presas idealios būklės, po kapitalinio remonto nenaudotas. Aptarnavimas tik pas gamintoją. Ideali būklė. Visiškai automatinis darbas. Reguliuojamas ryšulio ilgis 600–1200 mm. Variklis 15 kW. 2007 metai. Ryšulio svoris apie 380 kg. Bedpfxjx S Sbdo Akusli

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 12 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 630207349, HSM V-Press 825 Plus Pro – beveik nenaudota, suspausta tik 16 ryšių Parduodama HSM V-Press 825 Plus Pro, išskirtinai mažai naudota. Įrenginys per visą laiką pagamino tik 16 ryšių, todėl praktiškai yra kaip naujas. Bedoyy Ddaspfx Akueli Idealiai tinka įmonėms, ieškančioms aukštos kokybės presavimo įrenginio, nenorintiems mokėti už naują mašiną.

Būklė: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: V302591-20, spaudimo jėga: 130 t, pildymo angos plotis: 1 620 mm, pildymo angos ilgis: 972 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, bendras svoris: 41 000 kg, slėgis: 280 juosta, alyvos bako talpa: 2 450 l, galia: 150 kW (203,94 AG), BOA Impress D130 B 110 with side-tying – used baler, professionally maintained Are you looking for a powerful, reliable, and immediately available baler? Then this BOA Impress D130 B 110 with side tying is an excellent opportunity. We received this baler as a trade-in. The previous owner, a customer in the UK, operated this BOA baler for many years and has now opted for a new BOA installation, which speaks volumes about the trust in the machine, the brand, and the service behind it. The baler was serviced exclusively by our own BOA service team in the UK throughout its entire period of use. This maintenance was always performed with great care, resulting in a fully documented service history. The machine was decommissioned in operational condition and is currently stored at our facility, available for inspection. Prior to delivery, the machine will undergo a technical check-up. Any parts in need of replacement will be replaced to ensure the baler is offered in good working condition. Why this BOA D130 B is attractive The BOA Impress D130 B 110 is a heavy-duty industrial baler with high compaction force, suitable for intensive use and large throughput. With its side-tying system and robust construction, this machine is an ideal solution for companies aiming to process large volumes of material efficiently. Technical specifications Type: BOA Impress D130 B-5V-1.6 Bljdpfx Ajy Tnzcjkuei Model: D130 B 110 with side tying Hydraulic power: 110 kW Main pumps: 2 × 55 kW Back pressure pump: 5.5 kW Filter pump: 5.5 kW Oil cooler: 4 kW Operating voltage: 400 V / 50 Hz Insulation class: IP55 Hydraulic working pressure: 280 bar Oil tank capacity: 2,450 litres Pressing force: 1,266 kN / 126 tons Specific pressing pressure: 10.5 kg/cm² Ram stroke: 2,900 mm Channel size: 1,100 × 1,100 mm Press chamber volume: 3.51 m³ Bale length: adjustable, approx. 1,400 mm Bale weight: up to approx. 1,200 kg, depending on material Number of tying wires: 5 vertical / 5 horizontal Hopper opening: 1,620 × 972 mm Machine weight: approx. 45 tons Noise level: < 85 dB(A) Average cycle time under load: 20 seconds Availability: The machine is currently in our storage and can be viewed by appointment. Since the baler was taken in as a trade-in, dismantled in working condition, and maintained by our own service team, we can provide a reliable overview of its technical condition and history. A robust used BOA baler with known background, professional service history, and a check-up before delivery.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 130 t, pildymo angos plotis: 1 620 mm, pildymo angos ilgis: 972 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, bendras svoris: 43 000 kg, garantijos trukmė: 6 mėnesiai, slėgis: 280 juosta, alyvos bako talpa: 2 450 l, galia: 110 kW (149,56 AG), paskutinio kapitalinio remonto metai: 2026, This Impress D130-A-110 kW is in like-new condition and has been fully refurbished. The press has been completely rebuilt, with almost all components replaced by new parts. Only the frame and a few mechanical components remain from the original assembly. The main cylinder has been fully overhauled. In addition, all electrical components and the entire hydraulic control system have been replaced with new parts. The control cabinet is also entirely new, ensuring maximum reliability, safety, and operational security. The standard configuration of this machine features horizontal tying. Thanks to the prepared frame, this baler can also be supplied with both horizontal and vertical tying on request, making the machine flexible for various material streams. Blsdpfx Ajy Tm H Rjkusi Applications Paper and cardboard, mixed streams, plastic films, PET bottles, containers, (long) agricultural films, plastic tanks, car tires and bumpers, and much more. As you have come to expect from BOA, this second-hand machine can also be supplied with technical support, parts provision, and expert advice.

Būklė: naudotas, Technical data: Pressing force: 178 kN Drive power: 4 kW Cycle time: 23 s Loading height: 928 mm Loading aperture (W x H): 1195 x 558 mm Bale dimensions (L x W x H): 1200 x 780 x 1000 mm Bale weight: 250 kg Machine dimensions (W x D x H): 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold polyester strapping Year of manufacture: 2010–2013 Blsdpfxsv Akmze Akuoi

Būklė: geras (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 58 t, labai gera būklė, visiškai veikiantis, nedaug darbo valandų, pagaminimo metai 2021, spaudimo jėga 58 tonos Nauja kaina: matyta už 19 500 € Spaudimo cilindras buvo išmontuotas transportavimui, apžiūra galima pagal susitarimą. Sandėlyje yra ir daugiau presų Bedpeyzw U Uofx Akujli

Būklė: naudotas, Modelis: HSM V-press 1160 plus presavimo presas Presavimo jėga (kN): 59 Našumas (balių/val.): 1-2 Didžiausias baliaus dydis (mm): 1200x1100x1000-1200 Išmatavimai (ilgis x plotis x aukštis, mm): 1780x1150x2985 Galia (kW): 4 kW Svoris (kg): 2300 Pagaminimo metai: 2018–2019 Bsdpjv Al Tisfx Akueli

Būklė: paruoštas naudoti (naudotas), Manufacturer: HSM Model: VL 155.2 Dimensions (W x D x H): 1450 x 926 x 2400 mm Pressing force: 16 t Filling opening: 1100 x 590 mm Bsdjv Ai Tgjpfx Akujli Filling chamber dimensions: 1100 x 700 x 1130 mm Bale size: 1100 x 700 x 950 mm Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5A Tying: 4-way vertical Throughput: 4 - 8 bales/h Machine weight: 940 kg Year of manufacture: 2001-2005

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 20 331 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 970 mm, pildymo angos ilgis: 1 800 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 750 kg, bendras svoris: 33 000 kg, Good day, We hereby offer you, without obligation, a used, complete bale press line consisting of a baler from HSM, type VK 8818 R-FU including conveyor technology and wire feed stations. The following technical data have been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we cannot accept any liability. Technical data – press: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Pressing force, main press: 1000 kN Specific pressing force: 120 N/cm² Pressing force, shearing edge ejector: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm; variable length, 600 up to 2000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights at a bale length of approx. 1.2 m: 650 – 750 kg/bale, depending on material Hydraulic oil tank capacity: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Overall press dimensions assembled: 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions (press with conveyor system): 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of the press: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Special equipment ordered additionally: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with identical output performance Manual switching on/off of the number of wire ties to save strapping wire on non-expansive materials Shearing edge ejector with 121 kN pressing force Sensor-based wire monitoring with press shutdown in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the press: The entire press line (baler and conveyor system) is in good, immediately operational condition. The system was cleaned weekly by the operator, lubricated and serviced as specified by the manufacturer. Technical data – chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Incline belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: Bsdpoyz Af Ejfx Akuoli HSM VK 8818 R-FU baler Maintenance platform Bale chute Wire feed stations Wire roll trolleys (without wire rolls) Stadler chain belt conveyor KF 1800 Transverse sliding belt conveyor Pit cover from feed conveyor to pit Second control cabinet for press operation at the conveyor Machine documentation in English Delivery time: The entire line is already dismantled, stored, and can be loaded at short notice after receipt of payment. We would be pleased if this or one of our other baling presses is of interest to you. Your Service Team Mertens & Frowein GmbH

Būklė: naudotas, Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, AUTEFA presavimoji LIFT BOX - pusiau automatinė presavimoji - 2 kamerų sistema - Išankstinis presavimas – galutinis presavimas - automatinis TITAN apvyniojimo aparatas - Valdymas atnaujintas 2015 m. - Hidraulika pilnai atnaujinta 2018 m. - Kondensatorius naujas 2012 m. - Kaušo išėmimo vežimėlis - Transportavimo segmentai (ritininiai konvejeriai) Bedpfx Aeytb Sgekujli - Sukamasis stalas - Ritininio konvejerio svarstyklės - Ritininio konvejerio kėlimo stalas - Pakavimo medžiaga - Ryšulio dydis PxIxA 1250x750x1100mm - Ryšulio svoris apie 330kg - Dienos našumas 25–30 t Įrenginys prieinamas 2 vnt (kaina nurodyta už vienetą) Atkreipkite dėmesį: įrenginį turi išardyti, supakuoti ir išsiųsti/pasiimti pirkėjas.

Būklė: geras (naudotas), Gamybos metai: 2012, Pirminis smulkintuvas nėra pasiūlymo dalis (viršutinė dalis). Siūloma tik apatinė dalis. Popieriaus presas / balų presas PRESTO CC 40 V Gamintojas: PRESTO GmbH & Co. KG Mašinos tipas: CC 40 V Mašinos numeris: 28074 Pagaminimo metai: 2012 Tuščias svoris: 4200 kg Maks. darbinis slėgis: 260 bar Bedpfxsyrt T Tj Akusli Apsaugos klasė: IP55 Nominali srovė: 30 A Nominali įtampa: 400 V, 50 Hz Nominali galia: 15 kW Elektros jungtis: 35 A gG Mašinos tipas: horizontali popieriaus ir kartono balų presas

Būklė: naudotas, Bendri matmenys: 2800x2570x2000 mm Bjdpsyibhkefx Akujli

Būklė: naudotas, Gamybos metai: 2012, spaudimo jėga: 40 t, Gamintojas: HSM Modelis: HL 4010 Li Pagaminimo metai: 2012 Blsdpfx Akex H R U Ssuei Spaudimo jėga: 40 t

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, Technical Data: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Bedpfxoygud As Akusli Idle throughput (theoretical): 643 m³/h Capacity at 50 kg/m³ (theoretical): 32.15 t/h Feed opening width x length: 970 x 1,800 mm Bale width x height x length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with matching shaft covers - 1 carrier and maintenance platform for conveyor and hopper - 1 STADLER feeder - 1 HSM VK8818 R FU (100 t) automatic channel baler - 1 wire stand for 500-kg soft wire spools - 10 wire spool carts - 1 multi-function control system for the baler - Complete construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning upon request. Weight: 33,000 kg Binding type: wire Processable materials: plastic film, mixed paper, cardboard, HDPE/LDPE hollow containers, and plastic bottles The plant is currently in operation and can be inspected during ongoing business. The machine will be dismantled on 16/02 and can be inspected at our site after that. Available immediately!

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 10 t, pildymo angos plotis: 580 mm, pildymo angos ilgis: 900 mm, kamuolio ilgis: 800 mm, ryšulio plotis: 500 mm, ryšulio aukštis: 600 mm, balo svoris: 100 kg, bendras plotis: 1 000 mm, bendras aukštis: 1 540 mm, bendras ilgis: 4 700 mm, bendras svoris: 1 200 kg, galia: 6,8 kW (9,25 AG), transporto ilgis: 4 700 mm, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, Mašina buvo pas mus kapitališkai atnaujinta, visiškai išardyta. Pagrindinis cilindras naujai sandarintas. Nauji hidrauliniai vamzdžiai. Naujas hidraulinis alyva. Papildomas alyvos variklis. Atnaujinti polikarbonato langai. Naujai sureguliuoti presavimo plokštės kreipiamieji ritinėliai. 3 kartus horizontaliai rankiniu būdu surišama. Surišimas viela. Balo ilgis reguliuojamas: 400, 600, 800, 1000 mm. Yra naudojimo instrukcija su elektros ir hidraulinė schema. Bljdpfx Akey D Dr Sjuji

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 386, spaudimo jėga: 50 t, pildymo angos plotis: 1 110 mm, pildymo angos ilgis: 1 050 mm, ryšulio plotis: 1 050 mm, ryšulio aukštis: 730 mm, balo svoris: 425 kg, bendras plotis: 2 100 mm, bendras aukštis: 3 100 mm, bendras ilgis: 5 000 mm, bendras svoris: 6 800 kg, transporto aukštis: 2 400 mm, galia: 22 kW (29,91 AG), Presa buvo pakeista didesne. Presa buvo naudojama įprastai iki išmontavimo. Veikimas buvo visiškai užtikrintas. Presa yra adresu: Chemnitzer Str.96, 09212 Limbach-Oberfrohna. Bsdpfx Akoypb Aweusli

Būklė: geras (naudotas), Gamybos metai: 2011, veikimo valandos: 40 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 88 t, pildymo angos plotis: 990 mm, pildymo angos ilgis: 1 800 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, bendras svoris: 23 000 kg, alyvos bako talpa: 2 000 l, galia: 90 kW (122,37 AG), tūrio srautas: 643 m³/val, Good day, We hereby offer you, without obligation, a used baler including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. The following technical data has been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we provide no guarantee. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours, as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Chamber feed opening: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale size: 1,100 x 750 mm, length variable from 600 to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions – press with conveying technology: 14,000 x 23,000 x 7,745 mm (L x W x H) Blodpfx Aksymmtcouei Note: The machine was used at a recycling facility for compaction of paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger baler in May/June 2026. Until then, the machine can be inspected under working conditions with material throughput. We would be pleased if this baler is of interest to you. Your service team at Mertens & Frowein GmbH

Būklė: naudotas, Gamybos metai: 2005, veikimo valandos: 24 500 h, Funkcionalumas: visiškai funkcionalus, Gamintojas Avermann Tipas AVOS 1810S-90/100 Pagaminimo metai 2005 Darbo valandos 23 100 val. Supresuotų ryšulių kiekis 16 163 vnt. Pagrindinio preso spaudimo galia 100 tonų Specifinė preso galia 121,2 N/cm² Padavimo anga 1 000 x 1 800 mm Talpa per ciklą 1,35 cm³ Teorinis ciklo laikas 12,5 s Ryšulio dydis 1 100 x 750 mm Variklis 2 x 45 kW Jungiamoji galia 130 kW Bjdpszc Rhvsfx Akuoli Rišimo sistema 5 kartų vertikali, pilnai automatinė Našumas prie tūrinio svorio 30 kg/m³ apie 12,2 t/val. tūrinio svorio 50 kg/m³ apie 16,0 t/val. tūrinio svorio 100 kg/m³ apie 23,2 t/val. Ryšulio svoris 500 iki 800 kg, priklauso nuo medžiagos ir ryšulio ilgio Hidraulinės alyvos talpos tūris 2 000 l SPS valdiklis (gamintojas, tipas) Siemens SIMATIC S7-300 Transportavimo matmenys tik preso 11 200 x 2 355 x 2 700 mm (be padavimo latako) Preso svoris apie 24,5 t. Priedai: keturlankstis ir specialus presavimo stūmoklis

Būklė: naudotas, Parduodame naudotą atliekų presavimo presą. Tinka presuoti popierių, kartoną ir plastikinę plėvelę. Presas yra visiškai veikiantis. Yra galimas veikimo vaizdo įrašas. Blsdpfx Ajy S Tf Djkusi

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 38 t, MPC 20 PE presavimo konteineris Bsdeyiltqepfx Akuoli

Būklė: geras (naudotas), Gamybos metai: 2005, veikimo valandos: 15 606 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 050 mm, pildymo angos ilgis: 1 250 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 700 mm, balo svoris: 500 kg, galia: 30 kW (40,79 AG), tūrio srautas: 160 m³/val, Good day, We hereby offer you, subject to prior sale, a used baler from Presto GmbH & Co. KG, model HPK 50 B. The following technical data has been taken from the manufacturer's manual and brochures, for the accuracy and completeness of which we cannot assume any liability. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Press force (main press): 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions (with bulk density of 60 kg/cbm): approx. 6.7 t/hour Machine weight (press): 12.5 t Blodoyplwfopfx Akuji Note: The machine has been serviced in our workshop (main control valve on the hydraulic block replaced) and tested in ongoing operation, both in manual and automatic mode. The machine documentation is available in German. Inspection of the baler is possible by appointment at our workshop. We would be pleased if this machine is of interest to you. Your Service Team, Mertens & Frowein GmbH