Balu presas

Hsm VK 3012

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 21 676 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tuščias svoris: 25 000 kg, tūrio srautas: 930 m³/val, darbinis slėgis: 250 juosta, Good day, Cgsdpfx Asvgrh Ueahjp We hereby offer you, subject to prior sale, a used baler from manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the operator’s manual and manufacturer brochures. We cannot accept any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours, as of November 2024 Main press force: 78 t Specific press force: 95 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume / press cycle: 2.7 m³ Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions when assembled with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press only): approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Gamybos metai: 2003, būklė: dilaminuotas dirbtuvėje (naudotas), Stock no. 2651 1 used underwater pelletizing system, partially overhauled in 2023 Throughput up to approx. 450 kg/h, depending on material, comprising: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, 4.4 kW drive By-pass system TVE 1000 ED pellet dryer with 4 kW drive included Agglomerate catcher Temperature-controlled water system with 200 L water tank, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further underwater pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Cgedpfx Aeiyyf Ijahsp Available from stock Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruders.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, veikimo valandos: 2 632 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 29.381, spaudimo jėga: 35 t, pildymo angos plotis: 620 mm, pildymo angos ilgis: 1 000 mm, bendras plotis: 2 380 mm, bendras aukštis: 2 500 mm, bendras ilgis: 6 625 mm, Įskaitant padavimo juostą. Mašina iš karto paruošta darbui. Cgodpfx Ajvaw T Asahjp

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, We deliver the machines wherever you require, and can install them upon request in consultation. Optional: Stainless steel discharge element, stainless steel storage silo, blower, pipes approx. 3 meters. Milling machine 800 series 22 kW or 37 kW 3 x 2 knife set configuration. Cgedpfx Ajt Iw Huoahjp Bwj3E79Mpn 2 x stators screen deck as per your request with Variable Frequency Drive, optional Product discharge and storage in various options available, priced extra competitively in combination Motor power adjustable. Other modifications are negotiable, such as a rotor adaptation with more knives, e.g. 5 rows of knives or heavy-duty version. Delivery/time to be agreed upon. Call or email us to discuss or if you have any questions, please respond with your name, company name, and correct telephone number. Without these correct details, RSS Recycling Shredders and Solutions (Netherlands) cannot respond.

Būklė: naujas, Gamybos metai: 2023, mašinos/transporto priemonės numeris: 7YXXX, VIS G ist die ideale und effizienteste Lösung für die Schrottverarbeitung wie Stanzteile, Abschnitte und Drähte und wird vor allem für die Automobilindustrie, Metallrecyclingunternehmen sowie die Nichteisenmetall-Remelterindustrie empfohlen. Cgjdpfx Aomqi Akoahjp

Gamybos metai: 2010, būklė: geras (naudotas), 2 SICON shredders Year: 2010 Electrical cabinet missing Price: €15,000 each Cedpfjiz Tm Iox Aahegp 4 densimetric tables: €8,000 each

Gamybos metai: 2017, būklė: paruoštas naudoti (naudotas), Material throughput: LDPE: 110 kg/h, PA6.0/LDPE/EVOH: 150 kg/h, PP/PA6.0/LDPE/EVOH: 135 kg/h, PA6.0/LDPE: 120 kg/h, EVA/LDPE: 150 kg/h. Rated power: 77 kW, PCU power: 30 kW, extruder power: 18.5 kW, motor power: 10.7 kW, heating zones: 1, heating capacity: 12 kW. Documentation available. On-site inspection possible. Cjdpfx Aswty Hkjahegp

Būklė: paruoštas naudoti (naudotas), Techniniai duomenys Dixi 60 AUTOMAT presas Codov Amw Nopfx Aahegp Pakrovimo anga plt. x aukšt.: 1550 x 1000 mm Variklio galia: 31,5 kW Presavimo jėga: 60 t Ryšulio svoris (priklauso nuo medžiagos): 350–600 kg Ryšulio matmenys plt. x aukšt. x ilgis (reguliuojama): 1100 x 800 x 300–1600 mm Presavimo / ciklo laikas: 13/24 s Įrenginio svoris: 7000 kg

Būklė: naudotas, Gamybos metai: 2018, rotoriaus skersmuo: 368 mm, rotoriaus plotis: 1 500 mm, No. 10027 Single-shaft shredder / granulator AMIS / WEIMA WT 15 Cgsdpjxwdiuofx Aahop Used, year of manufacture 2018, approx. 250 operating hours According to our customer, the machine is fully functional and can be inspected and tested on site. Single-shaft shredder suitable for cables, plastics & recycling applications Feed opening: 1500 x 1160 mm (LxW) Rotor width: 1500 mm Rotor diameter: 368 mm Rotor speed: approx. 90 rpm Motor power: 90 kW Throughput capacity: approx. 5 tonnes per hour (depending on material) System output: 99 kW Current draw: 210 A Voltage: 400 V / 50 Hz PLC control: Siemens SIMATIC Integrated screen with 20 mm screen hole diameter Spare screen with 50 mm screen hole diameter The high-performance shredder from the WT series is ideally suited for processing a wide variety of plastics – especially challenging, flexible materials such as films, filaments, big bags, tapes, carpets, textiles, foams, as well as all loose and non-bulky residual materials. The WING-RAM pusher ensures reliable feeding, even with contaminated or moist materials. Including angled conveyor / discharge belt AMIS FB 7000 x 1500 x 580 / year of manufacture 2018 / 1.5 kW Including AMIS magnetic separator Installation dimensions: approx. 9000 x 3500 x 3950 mm (LxWxH) Transport dimensions (single-shaft shredder): approx. 3000 x 2700 x 3200 mm (LxWxH) Weight: approx. 12,500 kg Sale on behalf of customer, ex site near 69123 Heidelberg, without dismantling, transport or installation. Dismantling, transport and loading by us available as an option. Subject to errors in description and pricing. To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as is. Technical details, condition description, year of manufacture and scope of delivery as per manufacturer's brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: “purchased as inspected”. Images and videos are for reference only and may not reflect the actual scope of delivery. Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1998, Tank volume: 350 l, permissible operating pressure: 6 bar, permissible operating temperature: 90°C, motor manufacturer: Röchling, motor type: A3, flow grease quantity: 1 kg. Cgjdpfx Ajt R Trxeahep