Renishaw Stiefelmayer 413100-89 C 100 413514 pirkti naudotą (69 043)

Būklė: labai geros būklės (naudotas), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used to carry out temperature shock tests and is typically utilized in industry, research, and quality assurance sectors. Application areas: - Material testing - Aging tests - Electronics and component testing - Temperature shock and thermal cycling tests Technical Data: Type: TSS-70/130 Test chamber volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient to +180°C Cooling rate: approx. 4 K/min from ambient to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change speed: - Max. 100 K/min mean for shock test cycles (without heat radiation) Changeover speed: - ≤ 15 min between -65°C and +200°C (with 10 kg ICs) Changeover time: < 10 seconds Electrical Data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Rated current: approx. 29 A On-site fuse: 32 A slow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Equipment / Features: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs possible) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external test item control - Fault signal on potential-free contact Load capacity up to 30 V DC, 2 A EMC tested Technical Design: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber / transfer basket made of stainless steel, material no. 1.4301 - Insert rack made of stainless steel wire - Tubing port NW 50 with sealing plug - Compressed air connection 1/4" male thread - Condensate drain, non-pressurized R 1/2" female thread Giodpfjy Hkd Hex Ap Iju - Safety door locking mechanism - Lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Intake dimensions approx.: 1990 x 940 x 1652 mm Chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh Important safety information for buyers: The following measures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: see images (Specifications subject to change and error) For further questions, please feel free to contact us by phone.

Būklė: geras (naudotas), Feutron temperature test chamber -40 to +100°C The Feutron TPK 3403/125 is a workhorse for standardized temperature testing due to its robust construction. The main areas of application for this model are: 1. Electronics and component testing This is the most common application. It focuses on how components react to extreme temperatures: - Functional testing: Does the circuit board still work flawlessly at -40°C or +150°C? - Burn-in tests: Artificial aging of components by continuous operation at high temperature to provoke early failures. 2. Material testing Examining physical changes in materials: - Brittleness: Do plastics or rubber seals become brittle in the cold? - Deformation: Do composites warp when exposed to heat? - Storage tests: How stable are chemicals or adhesives over long periods at constant temperature? 3. Quality assurance (QA) - Spot checks: Series-accompanying tests to ensure that production stays within the specified temperature ranges. - Compliance testing: Tests according to common industrial standards (e.g., DIN EN 60068) that prescribe specific temperature profiles. Giedpfx Apjy Nynao Isu 4. Research & Development - Prototyping: Testing new housing designs or materials under controlled thermal conditions before mass production. Manufacturer: Feutron Type: TPK 3403/125 Temperature range: -40 to +100°C Refrigeration unit: Air-cooled condenser Temperature stability: approx. ±0.1 to ±0.5 K Usable volume: approx. 125 liters Refrigerant: R22 Operating overpressure: 23 bar Power supply: 220/280V-3-50Hz Fusing: 25 A Degree of protection: IP 20 Weight: 480 kg "All from a single source: We are happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Būklė: naujas, RHTC 100 TON M/H-M/C-2 hidraulinis presas Modelis: 100 TON M/H-M/C-2 Metai: 2025 Būklė: Naujas Atsargos numeris: 2796 Gsdpoxwk E Ajfx Ap Ijiu Darbinis plotis: 1000 mm Eiga: 380 mm Maksimali galia: 100 tonų

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 800 kN, Parduodama Arburg prekės ženklo ir 370 C 800-100 modelio plastiko liejimo mašina. Techniniai duomenys: Gsdpfx Aeyxqiyop Ijiu Gamybos metai: 2007 Deja, liejimo agregatas nėra komplekte Uždarymo jėga: 800 kN Šviesos stulpelių atstumas: 370x370 mm Maks. plokščių atstumas: 750 mm Įrankių montavimo aukštis: 250 mm Liejimo vienetas: 100 Pagal pageidavimą galime surengti transportavimą ir pakrovimą visoje Europoje už papildomą mokestį. Kaina nurodyta be PVM. Apžiūrėti galima tik susitarus. Susisiekite su mumis – mūsų komanda mielai Jums padės. Galima priimti mainais ar išperkant. Įrengimų pirkimas/pardavimas GAMYBOS IR METALO APDIRBIMO ĮRANGOS PIRKIMAS/PARDAVIMAS IR DAUGIAU Ieškote kokybiškos, bet ekonomiškos metalo apdirbimo įrangos savo gamybai? O gal norite parduoti savo įrangą? Daugiau informacijos ar kontaktų rasite mūsų interneto svetainėje.

Būklė: naujas, Pressure: 100Motor: 15Installation height: 500Stroke length (max.): 400Table size: 800 x 600Ram area: 800 x 600Table height: 850Dimensions (LxWxH): 1,300 x 2,000 x 2,750Weight approx.: 5,500Oil filling: 200Control / Key switch: 1. Setup mode Manual without light sensor (max. 10mm/sec speed) 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230mm Auxiliary cylinders: 2 pcs Ø 50 x 30mm Auxiliary guide: 2 pcs Ø 50mm Motor: 11 kW – 15 hp (IE-3) Pump: 23 liters / ASC Speed: Advance 110mm/sec – Return 200mm/sec – Pressure: 9mm/sec Installation height: 500mm Stroke length: 400mm Table plate: 800 x 600 – (with T-slots) (custom design available) Ram plate: 800 x 600 – (with T-slots) Table height: 850mm (floor to top of table plate) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC (20 – 100 tons) Speed adjustable via PLC Air cooler Prefill valve Control accessories: Siemens S7-1200 Main control cabinet Swiveling operator panel Safety PLC – SICK Light sensors SICK 700 + 150mm Linear scale for setting the stroke length 9” PLC screen – Siemens (German & English) Mobile two-hand control Ethernet connection for remote maintenance Alarm indicator for faults (light & sound) 2-fold workspace illumination Giedpom Nntysfx Ap Isu 8 free inputs & outputs on the PLC for external connections The press complies with machinery directives Hydraulic proportional valves Dual-channel cable protection Operating manual & parts list (German) With lateral safety door (doors can be slid to the rear)

Būklė: naujas, Gamybos metai: 2026, galia: 15 kW (20,39 AG), spaudimo jėga: 100 t, eigos ilgis: 600 mm, stalo plotis: 650 mm, stalo ilgis: 850 mm, gerklės gylis: 300 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, 100 Ton C-Frame Hydraulic Press – CHCP 100 – New / 24-Month Warranty Hydraulic presses are industrial machines that offer high force and precision in metal forming, deep drawing, cutting, and assembly operations. The CHCP 100 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for heavy-duty production applications, featuring high tonnage capacity, robust frame construction, and precise operational capabilities. Key Advantages - Rigid, vibration-free steel frame construction - High precision (≤120 microns/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long lifespan and low maintenance cost Applications - Metal forming - Deep drawing and stamping operations - Cutting and punching operations - Assembly and pressing operations - Automotive and ancillary industries Standard Features - Stress-relieved steel frame construction by vibration method - PLC control with touch panel - Argon welding applications - Welding certified to EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and squareness in accordance with ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 100 Gedpfxsyzb Dyo Ap Ijiu - Press Force: 100 Ton - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 650 x 850 mm - Press Depth: 1300 mm - Press Width: 650 mm - Table Height from Floor: 900 mm - Total Height: 2700 mm - Main Cylinder Diameter: Ø220 mm - Motor Power: 15 kW - Weight: 8500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 Months - Condition: Brand new and unused This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, galia: 7,5 kW (10,20 AG), spaudimo jėga: 100 t, stalo plotis: 670 mm, stalo ilgis: 950 mm, perforavimo jėga: 100 t, pramušama skylė stalo paviršiuje: 180 mm, cilindro skersmuo: 45 mm, eigos reguliavimas: 120 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press that operates by means of the force generated through an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is a highly efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 100 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance tailored for serial production environments. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement through centralized automatic lubrication - Production-ready usability with PLC control + dual hand/foot pedal operation Typical Applications - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • 4-way guided slide Giedevtx Injpfx Ap Iju • Spheroidal cast connecting rod and gear bushings • Crankshaft and drive shafts made of 4140 quenched & tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Dual solenoid safety valve • Manually adjustable stroke • Finger–hand safety protection with light curtain • PLC control system • Dual hand/foot pedal operation • Mechanical safety system • Emergency reverse motor operation • Occupational safety regulations compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener units • One set of custom dies (on request) • Eight-way guided slide ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Bed–ram distance: 400 mm Slide–table clearance: 465 mm Distance between side frames: 420 mm Ram adjustment (shut height adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1900 mm Approx. press height: 2450 mm Front anchor span: 710 mm Side anchor span: 1135 mm Table bore diameter: Ø200 mm Table size: 600×780 mm Die clamping slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approx. weight: 4650 kg Note: Please notify us if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.

Būklė: naujas, Pressure: 100 Motor: 11 Installation height: 500 Max. stroke length: 400 Ram adjustment: 790 x 600 Table height: Floor to top edge of table - 850 Dimensions (LxWxH): 1,300 x 2,000 x 2,750 mm Approx. weight: 5,500 kg Oil capacity: 200 Type: Hydraulic C-frame press Capacity: 100 tons at 230 bar Gsdpfxowrkctj Ap Ijiu Control / Key switch modes: - Setup mode – Manual, without light curtain - Automatic mode – At full speed and with light curtain Hydraulic system: - Main cylinder: Ø 230 mm - Auxiliary cylinders: 2 units, Ø 50 x 30 mm - Auxiliary guides: 2 units, Ø 50 mm - Motor: 11 kW / 15 HP - Pump: 16 cc – 23 l/min, helical gear pump Speeds: - Approach: 110 mm/sec - Return: 200 mm/sec - Pressure phase: 9 mm/sec Machine dimensions: - Installation height: 500 mm - Stroke length: 400 mm - Ram plate: 790 x 600 mm (with T-slots) - Table plate: 790 x 600 mm (with T-slots) - Table height: 850 mm (from floor to top edge of table) Hydraulic accessories: - Hydraulic control block & components by REXROTH - Pressure adjustment via PLC (20 – 100 tons) - Adjustable speed via PLC - Air cooler - Pre-fill valve - Pressure-holding valve Control accessories: - Siemens S7-1200 control system - Main control cabinet - Safety PLC by SICK - Light curtains by SICK (700 mm) - Linear encoder for stroke adjustment - 10" BEIJER touchscreen (German & English) - Movable two-hand control - Ethernet port for remote maintenance - Fault indicator with light and sound signal - Dual working area lighting - Side safety doors (fold-out) - Hydraulic proportional valves - Dual-channel safety control - Operation manual & parts list (German) - Conforms to current Machine Directive EN 693 Oil volume: 220 liters (tank volume: 250 liters) Total weight: approx. 5,500 kg Dimensions: 1,300 x 2,000 x 2,750 mm Paintwork: RAL 7035 Light Grey & RAL 7016 Anthracite Grey

Būklė: labai geros būklės (naudotas), CTS CW‑60/5.5 – Climate Test Chamber, Water-Cooled The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for temperature and humidity testing of multiple specimens simultaneously. Device Description: The climate test chamber enables evaluation of the function or material properties of test objects under the influence of temperature and humidity. Efficient air circulation with a correspondingly high airflow ensures excellent transfer conditions to the test item. The air-handling module is located at the rear of the chamber. The plant aggregates are mounted in a separate frame behind the unit for easy access. The control system is housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature fluctuation: ±0.5 to 1 K over time Gsdpfjx Eabpex Ap Ieiu - Temperature change rate (linear, with specimen and radiation, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89°C - Temperature accuracy: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.h. over time Technical data refers to an ambient temperature of +25 °C, rated voltage 400 V, without test item, no radiant load, and without auxiliary equipment. Dimensions: Interior (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic - Infinitely variable capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R 23 / R 404 A Notes: - Viewing available by appointment (46325 Borken) - Shipping by freight carrier possible – costs & arrangements upon request - Scope of delivery: (see image) (Subject to changes and errors in technical data and descriptions!) Feel free to contact us by phone with any further questions.

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description This climate test chamber allows functionality or material properties of a test item to be evaluated under varying temperature and humidity conditions. Efficient air circulation with a correspondingly high recirculation volume ensures optimal transfer to the specimen. The air handling section is located at the rear of the chamber interior. The aggregates are housed in a separate frame at the back of the device and are easily accessible. The control system is located in a separate switchgear cabinet, with the control panel mounted on the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test space can also be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 - ±3% r.H. over time Technical data based on an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Gisdpfx Asx Eaxbep Ieu Dimensions: Interior (test space/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm Exterior dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power consumption: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Execution: - Cooling unit: water-cooled, low noise, semi-hermetic - Infinitely variable power adjustment via electronic monitoring and control system - Uses environmentally-friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment (46325 Borken) - Shipping via freight forwarding available – cost & arrangements on request - Scope of delivery: (see picture) (Subject to modifications and errors in technical data and information!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform temperature and humidity testing on multiple test specimens simultaneously. Device Description The climate test chamber enables the functional or material properties of a test object to be tested under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective climatic transfer to the specimens. The air handling unit is located at the rear of the chamber interior. The refrigeration units are positioned behind the machine in a separate frame and are easily accessible. The controller is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time Gedpfxox D Abpe Ap Ijiu - Linear temperature change rate with test specimen and radiant heat, measured in the supply air - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ± 0.5 K over time - Humidity deviation: ±1 – ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional accessories. Dimensions: Internal Dimensions (Test / Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm; Width: 1600 mm; Depth: 1550 mm External Dimensions: - Height: 2800 mm; Width: 2250 mm; Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 outlets) - Rated current: 86.0 A - Protection class IP 54 Technical Features: Refrigeration Unit - Water-cooled, low noise, semi-hermetic design - Infinitely variable power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes Viewing by appointment possible (46325 Borken) Shipping via forwarding agent possible – costs & arrangements on request Scope of delivery: (see photo) (Subject to changes and errors in the technical data, specifications subject to confirmation!) Please feel free to contact us by phone for further questions.

Būklė: naudotas, mytron Model: T2240 Water-cooled temperature chamber Technical data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test chamber volume: approx. 2240 liters Cable entry ports: 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature Temporal temperature stability: +/- 0.5 °K Spatial temperature stability: +/- 1.0 °K Cooling: Water cooling, Inlet and outlet: 1'' female thread Cooling water shut-off via solenoid valve when device is OFF Fault display for chiller malfunction Cooling water consumption: inlet temp. approx. 15 °C, approx. 15 l/min, outlet temp. approx. 22 °C (continuous cooling approx. 27 °C) Mains connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Protection: 3 x 20.0 A time-lag, 3 x 10.0 A time-lag Gedpfx Apovtl Hqo Isiu Lighting: 25 watt each, left and right sides of test chamber Exhaust connection: DN 100 mm push-fit system Safety device: Electronic overtemperature protection, fixed setting Smoke gas monitoring with audible alarm Viewing window: triple-glazed 130 x 360 mm Refrigerant: R404A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), CTS Model: TW-60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded - Heat input: 3000 watts continuous Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 48.9 kW - Rated current: 74.9 A Giedpfx Apsvb Hans Isu - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Model: TW-60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Gedpfx Aovb E Uqop Ioiu Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded - Heat input: 3000 watts continuous Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 48.9 kW - Rated current: 74.9 A - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) We are happy to answer further questions by phone.

Būklė: geras (naudotas), Gamybos metai: 2000, Arburg 270 C 400-100 (2000) Spaudimo jėga: 40 t Sraigto skersmuo: 20 mm Atstumas tarp kolonų: 270 x 269 mm Svoris: 25 g Tipas: horizontalus Pavara: hidraulinė Giodpfxexqfi Aj Ap Isu Valandos: 138000 h

Gamybos metai: 2010, būklė: paruoštas naudoti (naudotas), Yra Cloos robotizuota suvirinimo įranga su Kuka robotu. Roboto svoris: 1155 kg, valdymas: Qirox C Romat 520, valdymo svoris: 300 kg, roboto ašių skaičius: 6. Dokumentacija yra. Galima apžiūra vietoje. Giedpfjyt N Ayjx Ap Iju

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2021, baterijos talpa: 575 Ah, likusi baterijos talpa: 100 procentas, akumuliatoriaus įtampa: 24 V, bendras ilgis: 827 mm, bendras plotis: 325 mm, bendras aukštis: 630 mm, bendras svoris: 445 kg, Krautuvo baterija 24V 5PzS575 baterija, 100% IŠBANDYTA Pagaminimo metai: 2021 Svoris apie 435 kg Matmenys: 825 mm x 325 mm x 630 mm Bateriją aptarnavo ir testavo specializuota įmonė. Talpos testas (C5 iškrovimo testas): 659/575 Ah baterija Gisdpfx Asyu I D Ssp Iou Likutinė talpa: 100% Su Aquamatik užpildymo sistema (BFS) Su polių varžtais, bet BEIŠEJIMO pabaigos nuvedimo

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, baterijų gamintojas: Stuba, akumuliatoriaus modelis: 80v 5PzS775, baterijos talpa: 775 Ah, likusi baterijos talpa: 100 procentas, akumuliatoriaus įtampa: 80 V, baterijos svoris: 1 863 kg, bendras aukštis: 785 mm, bendras ilgis: 1 028 mm, bendras plotis: 850 mm, Krautuvų baterija 80V 5PzS775 100% IŠTESTUOTA Metai: 2024 Patikros data: 2025 Matmenys (ilgis x plotis x aukštis): 1028mm x 850mm x 785mm Svoris: 1870kg Bateriją prižiūrėjo ir testavo specializuota įmonė. Talpos testas (C5 iškrovos testas): 802/775 Ah baterija Likutinė talpa: +100% Giodpfx Apeyu Iw Sj Iou Su Aquamatik užpildymo sistema (BFS) Su polinių varžtų, bet BE GALINIO NUTEKĖJIMO

Būklė: geras (naudotas), Gamybos metai: 1972, Funkcionalumas: visiškai funkcionalus, This process plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository masses, etc., with a useful capacity of 100 liters. The total volume with the vessel closed is 123 liters, and the minimum fill volume is 35 liters. The system consists of a completely enclosed stainless steel vessel with a double jacket that can be heated or cooled with electricity/water, and a vessel lid with integrated mixing units and drives. The mixing vessel is mounted on three casters for mobility and can be rolled out for filling or cleaning. The lid is mounted on a lifting column for hydraulic raising and lowering, facilitating cleaning and emptying, and is equipped with an observation window as well as two filling nozzles with valves. These nozzles can also be used to add other product components. Additionally, there is an adjustment device for setting the grinding gap of the colloid mill. Technical specification: Vessel: Permitted operating pressure: 1 bar/-1 bar Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Gijdpfsyx Sxcsx Ap Iou Spiral agitator: 29/58 rpm

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, The LCT bio.x C100 brush cleaning table is a proven classic in a new design, featuring optimized device technology. It stands out due to its exceptional stability and load-bearing capacity. The spacious work surface enables unobstructed and comfortable operation. - Robust construction - Particularly low-maintenance - High load capacity - Energy-saving mode for idle periods such as nights or weekends Gedpfxoh S Unde Ap Isiu - A flexible swivel hose enables easy rinsing of parts - Optimal cleaning performance by heating the cleaning fluid to 41°C Parts are rinsed using a nozzle, which can be positioned as desired with the aid of the flexible jointed hose. The cleaning brush assists in cleaning heavily soiled components. The large cleaning area allows for highly effective work. High load-bearing capacity thanks to a stable device construction. The device is made of plastic, providing excellent stability and corrosion resistance. Easy to transport using a pallet truck. Multi-stage filtration system consisting of a coarse strainer, fine strainer, and magnet. Additionally, a washable filter bag (fineness: 100 μm) retains even the finest contaminants before they enter the bath. A functional control unit with a soft-touch operating panel ensures energy savings of about 50% by selecting the energy-saving mode. All electronic components are integrated into a compact technical module. Our LCT bio.x C100 can be operated with the following label-free cleaning agents: - LCT Bio Liquid - LCT Bio Liquid Spezial - LCT Bio Liquid Power - LCT Kokoscleaner - LCT Kokoscleaner Alu - LCT Kokoscleaner low-foam

Būklė: naujas, Gamybos metai: 2023, Nominal Pressing Force: 1,000 kN Gjdpfxsdulide Ap Ieiu Ram Stroke, adjustable in steps: 16...140 mm Ram Adjustment: 90 mm Throat Depth: 295 mm Stroke Rate (idle): 70 / min Die Installation Height at Maximum Stroke (stroke down, adjustment up): 420 mm* Table Clamping Surface (W x D): 1,050 x 660 mm Ram Clamping Surface (W x D): 640 x 460 mm Pin Bore in Ram: 65 H7 mm Main Motor Power: 7.5 kW Machine Height approx.: 3,085 mm Machine Weight: 8,500 kg Equipped with hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, and the latest safety standards (UVV).

Būklė: naudotas, Lens, lenses Godpfx Aeb Nfc Sjp Ieiu - Quantity: 6x lenses - Packaging: individually packed - Dimensions: 110/110/H35 mm - Price: complete set for all 6 pieces - Sold only as a complete set - Weight: 0.3 kg/piece

Būklė: naudotas, Temperature controller, temperature sensor, temperature adjustment, signal converter, temperature limiter, electronic temperature controller display Gedpfx Apopcmt Ts Ieiu -Manufacturer: Kfm, temperature controller display -Type: 800 710 -Temperature range: 0...100°C -Voltage: 220V / 48–62 Hz -Quantity: 2x displays available -Price: per unit -Dimensions: 125/100/H50 mm -Weight: 0.4 kg/unit

Būklė: geras (naudotas), Flat gear motor, geared motor, electric motor, electric geared motor, flat geared motor, flat gear motor -Manufacturer: KEB, flat geared motor -Type: F 4.2 C DK 100 LX 4 W TW i= 11.38 -Speed: 50 rpm -Motor: Type SK 100 L/40 -Power: 3.0 kW / 1410 rpm -Hollow shaft: Ø 40 x 150 mm -Protection class: IP56 Gijdpst Hy Thofx Ap Iju -Dimensions: 445/230/H360 mm -Weight: 60 kg

Būklė: geras (naudotas), 2-column punching tool, cutting tool, punching tool, punch press, die, punch, pillar set -Manufacturer: Fibro punching tool pillar set -Type: 201.31.056. DIN 9822 C 100 x 80 -Punch: see photos Gijdpsivql Sefx Ap Isu -Dimensions: 340/160/H235 mm -Weight: 23 kg