Pmh Gmbh Ex20-25D Nirtiert pirkti naudotą (69 540)

Būklė: naudotas, Gamybos metai: 1974, Priešsrovės talpa. Talpa 150 hl. Mašina (papildomai): horizontalus slėginis bakas Talpa: 150 hl Darbinis slėgis: 4 bar Darbinė temperatūra: 20 °C Hnsdpfx Aoyzhv Njdmek Ilgis: 4 m Plotis: 2,3 m Aukštis: 2,7 m Medžiaga: nerūdijantis plienas Padėtis: horizontalioje padėtyje Įranga: šildymo spiralė; lygio indikatorius; CIP jungtis; temperatūros indikatorius; mėginių paėmimo čiaupas

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, #9053 Capacity: 712 litres Max. allowable pressure: -1/+25 bar Test pressure: 37.75 bar Permitted min. / max. temperature: -10/+50° C Manufacturer: Siegfried Kempe GmbH Year of manufacture: 2007 Drawing, test certificate for acceptance, declaration of conformity as well as further technical documentation available Hnjdpfx Aelxyg Esdmsk

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, spalva: balta, krovinių skyriaus plotis: 1 430 mm, krovimo vietos ilgis: 2 680 mm, krovos erdvės aukštis: 2 300 mm, Buy WC Container with 2 Cabins NEW | Compact Toilet Container 3.83 m² | Sanitary Container Purchase WC containers directly from the manufacturer – compact toilet container with 2 cabins (3.83 m²), ready for immediate use. Ideal for construction sites, events, parks, and public areas. WC Container for Sale – Compact Toilet Container with 2 Cabins "Manufacturer of modular containers – customized solutions to your specifications, including bespoke dimensions and premium interior fittings." The WC Container SN-20 from MODULE-T Germany GmbH is the ideal solution if you are looking to purchase a toilet container with 2 cabins. With a compact footprint of just 3.83 m², this sanitary container provides two separate WC cabins, enabling simultaneous use with minimal space requirements. Thanks to its robust steel construction, hygienic equipment, and plug-and-play design, this WC container is ready for immediate operation and perfectly suited for mobile use. 👉 Buy your WC container now – compact, hygienic & straight from the manufacturer 🟩 Application Areas - WC container for construction sites - Toilet containers for events & functions - Sanitary containers for public facilities - Mobile WC units for parks & outdoor areas - Temporary sanitary solutions for industry & commerce 🟩 Your Key Benefits ✔️ WC container with 2 cabins – parallel use possible ✔️ Extremely compact – only 3.83 m² footprint ✔️ Mobile & flexible sanitary container ✔️ Ready for immediate use ✔️ Hygienic, low maintenance & easy to clean ✔️ Robust steel frame – durable & stable ✔️ 100% brand new – no rental or used containers ✔️ Direct from the manufacturer – excellent value for money ✔️ Forklift pockets and 4 lifting hooks included 🟩 Technical Specifications - Model: SN-20 - Dimensions: 268 × 143 cm - Area: 3.83 m² - Internal height: 2.35 m - External height: 2.60 m Construction: Hnjdpfsy Dayxjx Admsk - Powder-coated steel frame Walls: - 50 mm PU sandwich panels - Optional: reinforced insulation / mineral wool Floor: - PVC covering on fibre cement board - Water-resistant & durable 🟩 Included Features - 2 separate WC cabins with flush toilets - Ventilation system for optimal air circulation - Ready-to-connect for water & wastewater - LED interior lighting - Power sockets & light switches - Integrated fuse box 👉 Ready to use instantly, no additional installation required 🟩 Optional Features - Washbasin (internal or external) - Urinal, soap dispenser & hand dryer - Electric heater or air conditioning - Stainless steel or vandal-proof fittings - Hot water boiler (10 / 30 litres) - Expandable to complete sanitary facilities 🟩 Delivery & Installation 🚚 Delivery Germany & Europe: approx. 45–50 days 📦 Delivery pre-assembled or as flat-pack ⚡ Immediately operational after connection 🟩 Why choose MODULE-T Germany? - Over 15 years of experience in container construction - Specialist manufacturer of sanitary & WC containers - Pan-European delivery & project experience - Direct from manufacturer – no intermediaries 🟩 Call-to-Action 👉 Buy your WC container now or request a quotation 👉 Get expert advice directly from the manufacturer

Būklė: naudotas, bakelio talpa: 130 000 l, BENDRAI Įranga: ventiliacija / ištrauka Konstrukcija: vertikali Apsisukimų skaičius: 950 / 1145 aps./min. Vidinis skersmuo: 3 500 mm Bendras aukštis: 15 860 mm Izoliacija: yra Galia: 5,5 / 6,3 kW Maišytuvas: propeleris Pastatymo tipas: stovint ant kojelių Vieta: išorinis sandėlis Tipinė lentelė: Tūris: 130 000 litrų Produkto kontaktinė medžiaga: V2A 1.4301 (AISI304) Cilindrinis aukštis: 14 660 mm Paskutinis panaudojimas: maisto pramonė TALPA Apatinis dugnas: plokščias dugnas su nuolydžiu IZOLIACIJA Hnjdpfx Aoxqdbkodmsk Izoliacinis apvalkalas: hermetiškai suvirintas ĮRANGA Žmogaus anga / dangtis: cilindre Išleidimas: yra MAIŠYTUVAS 1 Įtampa: 380 V Maišytuvo padėtis: šone prie cilindro

Būklė: naudotas, bakelio talpa: 20 000 l, BENDRA INFORMACIJA Įranga: įsiurbimo/išleidimo ventiliacija, purškimo galvutė, kėlimo ąsos Konstrukcijos tipas: vertikali Pastabos: 1 talpa su nedideliu įlenkimu cilindre; žmogaus anga apie 340 x 440 mm Vidinis skersmuo: 2 500 mm Bendras aukštis: 6 750 mm Didž. viršslėgis: 0,50 bar Maišyklė: maišyklės flanšas Stovėjimo konstrukcija: aukščio reguliuojamos kojos Vieta: Brėmenas Tipinė lentelė: Tūris: 20 000 litrų Produkto paviršiaus medžiaga: V2A 1.4301 (AISI304) Būklė: naudotas Cilindro aukštis: 3 700 mm Paskutinis panaudojimas: vaisių sulčių pramonė TALPA Vidutinio tankis: 1,37 (t/m³) Kojų skaičius: 3 vnt. Hnodpfx Adsxqc Uiomjk ĮRANGA Žmogaus anga / dangtis: cilindre Išleidimas: vamzdžio galas ø apie 80 mm Pastaba: išleidimo galas nupjautas MEDŽIAGOS CHARAKTERISTIKA Kojų medžiaga: nerūdijantis plienas MAIŠYKLĖ 1 Maišyklės vieta: šone ant cilindro

Būklė: naudotas, Gamybos metai: 2006, bakelio talpa: 10 000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Year of manufacture: 2006 Remarks: Nameplate no longer available; cylinder manhole diameter 600 mm; a small dent is present on the side of the tank Internal diameter: 2,500 mm Total height: 3,800 mm Power: 3 kW Top: Flat bottom Agitator: Paddle agitator Support design: Height-adjustable feet Location: Outdoor storage Technical documents: Drawing Volume: 10,000 liters Hodpsx Dmbajfx Admenk Cylinder wall thickness: 3 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 2,000 mm Previous application: Sludge TANK Max. permissible operating temperature: 80°C Specific gravity of medium: 1.8 (t/m³) Bottom: Conical bottom Number of feet: 3 pcs EQUIPMENT Manhole / Dome: In the cylinder, in the top (Ø 430) Outlet: Flange DN80 Note: Minor residues MATERIAL SPECIFICATION Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: Fluid Voltage: 380/660 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Agitator arrangement: Eccentric in the top

Būklė: naudotas, BENDRA INFORMACIJA Bendras plotis: 700 mm Bendras aukštis: 2 050 mm Bendras ilgis: 1 750 mm Kita: - Gamintojas: APV - Tipas: DELTA SR52 - leidžiamas rėmo darbinis viršslėgis: 13 bar Hnsdpfx Aexqcitsdmek Vieta: Brėmenas Tipas ženklas: Būklė: naudota paskutinė naudojimo paskirtis: vyninė

Būklė: naudotas, bakelio talpa: 8 750 l, BENDRA INFORMACIJA Konstrukcija: stačiakampė Pastabos: kiekviename bake po 2 aušinimo plokštes; 1 žmogaus anga (apie 300 x 400 mm) priekiniame dugne; kojos su atskiromis, reguliuojamo aukščio kalotės varžtais (gali būti, kad ne visi varžtai yra pilni; kalotės neskaičiuotos į bendrą aukštį, naudojant jas aukštis atitinkamai padidėja); kojos išdėstytos lengvai pasislinkusios Bendras plotis: 1 620 mm Bendras aukštis: 2 700 mm Bendras ilgis: 2 950 mm Šildymas/aušinimas: yra Vieta: Brėmenas Identifikacinė lentelė: Tūris: 8 750 litrų Darbinė medžiaga (kontaktuojanti su produktu): V2A 1.4301 (AISI304) Būklė: naudotas Paskutinis panaudojimas: vyno laikymas TALPYKLA Palaikymo tipas: kojos Kojų skaičius: 4 vnt. ŠILDYMO/AUŠINIMO APVALKALAS Temperatūros reguliavimas viduje: aušinimo plokštė ĮRANGA Išbėgimas: DN40 DIN 11851 Hnedpjycktrofx Admek MEDŽIAGOS CHARAKTERISTIKOS Temperavimo sistemos medžiaga: nerūdijantis plienas Kojų medžiaga: nerūdijantis plienas

Būklė: naudotas, Gamybos metai: 2011, bakelio talpa: 956 l, GENERAL INFORMATION Hnjdpfox Dlqgsx Admek Design: vertical Year of manufacture: 2011 Remarks: Technical documentation (including agitator documentation) available for one of the two vessels Speed: 24 - 247 rpm External diameter: 1,050 mm Internal diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 2,000 mm Heating/Cooling: available Max. permissible operating overpressure: 1.5 bar Top head: Removable / hinged top cover Agitator: Anchor agitator Base type: mobile on castors Location: Bremen Technical documentation: Drawing, CE marking and declaration of conformity, operating manual Cylinder temperature control: double jacket Nameplate: Vacuum: 0.5 bar Volume: 956 litres Double jacket volume: 83.0 litres Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: unused Cylindrical height: 950 mm Last application: Pharmaceutical VESSEL Number of feet: 4 HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Discharge: 25 mm MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel AGITATOR 1 Agitator manufacturer: Inotec GmbH TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm Agitator arrangement: central on top cover Agitator equipment: pneumatically driven motor

Būklė: naudotas, BENDRA INFORMACIJA Hnjdpexqciasfx Admek Keitimosi plotas: 13,8 m² Vidinis skersmuo: 700 mm Bendras aukštis: 1.950 mm Bendras ilgis: 5.400 mm Kita: 1 jungtis sulenkta (žr. nuotraukas); Svoris: 1400 kg Vieta: Brėmenas Techninė dokumentacija: brėžinys, priėmimo sertifikatas Tipinė lentelė: Būklė: naudota Paskutinė paskirtis: garavimo vanduo APVALKALO TALPA Apvalkalo talpa: 1.400 litrų VAMZDŽIŲ SKYRIUS Vamzdžių talpa: 400 litrų Apvalkalo medžiaga: AISI316 (V4A) 1.4571 Vamzdžių medžiaga: AISI316 (V4A) 1.4571 Maks. leistinas darbinis viršslėgis apvalkalo talpoje: 0,5 bar Maks. leistinas darbinis vakuumas apvalkalo talpoje: 1,0 bar Maks. leistina darbinė temperatūra apvalkalo talpoje: 200 °C Maks. leistina darbinė temperatūra vamzdžių skyriuje: 100 °C Maks. leistinas darbinis viršslėgis vamzdžių skyriuje: 6,0 bar Maks. leistinas darbinis vakuumas vamzdžių skyriuje: 1,0 bar

Būklė: naudotas, Gamybos metai: 2006, bakelio talpa: 10 000 l, BENDRA INFORMACIJA Įranga: kėlimo kilpos Konstrukcija: vertikali Metai: 2006 Pastabos: Yra tik tipinė lentelė; Yra papildoma techninė dokumentacija; Cilindro liuko Ø 600 mm; išleidimo angoje sumontuotas reduktorius DN 50; pageidaujant galimas antras toks pat identiškas rezervuaras Vidinis skersmuo: 2.500 mm Bendras aukštis: 3.600 mm Vieta: Brėmenas Techninė dokumentacija: brėžinys, TÜV sertifikatai Tūris: 10.000 litrų Cilindro sienelės storis: 3 mm Produkto kontaktinis paviršius: V4A 1.4401/04 (AISI316) Būklė: naudotas Cilindrinis aukštis: 1.500 mm Paskutinis panaudojimas: srutos TALPA Maks. leistina darbinė temperatūra: 80 °C Tirpalo savitasis svoris: 1,4 (t/m³) Stovėjimo tipas: reguliuojamos kojelės Kojelių skaičius: 3 vnt. Hnedjycktfspfx Admek ĮRANGA Liukas / kupolas: cilindre, viršuje (Ø 430) Išleidimas: flanšas DN80 MEDŽIAGOS CHARAKTERISTIKOS Kojelių medžiaga: nerūdijantis plienas TECHNINIAI DUOMENYS / MATMENYS Dugno sienelės storis: 4 mm

Būklė: naudotas, Gamybos metai: 2008, mašinos/transporto priemonės numeris: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No. 166 0821 Year of manufacture: 2008 Used, ready for operation Travel ranges: X-axis: 600 mm Y-axis (swivel position): 600 (975) mm Z-axis: 500 mm Control: Siemens 840D control, side-mounted Feed/rapid traverse speed: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Absolute position measuring system X, Y, Z Spindles: Spindle speed (stepless): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% ED) Power: 2 x 38 kW (S6/40% ED) HSK–A 100, arranged horizontally side by side Spindle spacing: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled with AC technology Working area: Swing carrier with straight-toothed gearing, max. transport load 2000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tools, HSK-A 100 chain magazine, position-coded Automatic pickup Tool change time (chip to chip): 4.9 sec Max. tool diameter 100 mm Hedpfxsy Ah Rcj Admsnk 250 mm with adjacent space free Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Oil minimum-quantity lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic unit Maintenance module Water recooler Full enclosure, suitable for crane loading Dimensions, with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Dimensions, without paper band filter: approx. 5.15 x 6.60 x 4.20 m Additional Information: - Good condition, appropriate for the age - Annual servicing was carried out regularly by the previous owner --- Sale without clamping devices --- --- Without foundation components --- Available immediately, viewing by appointment EXW 72793 Pfullingen, Dismantled into main components Transport to installation site to be arranged by customer/purchaser! Dimensions/Transport dimensions of main machine parts: 1 pc Machine unit (X, Y, Z): mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc Table unit: mm 4400 x 2400 x 3400 approx. 10,000 kg Plus peripheral systems such as chip conveyor, small parts, sheet metal, etc. Short-term delivery possible!!!!! Viewing by arrangement

Gamybos metai: 2023, būklė: naudotas, Funkcionalumas: nepatikrintas, Vending Machine “NON-Stop-Shop” Vending Machine Manufacturer: NonStop Shop GmbH Year of manufacture: 2023 Technical Specifications Power supply: 230 V, 16 A Outer wall: Sandwich panels (two metal outer layers with polyurethane foam core) External dimensions (LxWxH): 4430 mm x 2450 mm x 3150 mm Unladen weight: approx. 1.8 t Product trays (LxWxH): 290 mm x 145 mm x 60 mm Temperature: Constantly controllable down to 3°C (independent of outside temperature) Transport options: Integrated forklift pockets (hence very flexible) Shelving systems: 43 channels, each with 10 trays of 5 kg Filling volume: No need to modify shelving system for different product heights Minimum stock detection: Hsdpfx Aey Anrysdmenk Status notification of available products directly to vendor’s/refiller’s mobile device Net purchase price €25,000 plus legally applicable VAT. VAT is itemized separately on our invoice. Financing available We can arrange suitable financing if desired. Please feel free to contact us. Subject to change, errors, and prior sale. Sale takes place without guarantee or warranty, exclusively to business customers. Enquiries will be processed Monday to Friday from 8 a.m. to 4 p.m.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 20 331 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 970 mm, pildymo angos ilgis: 1 800 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 750 kg, bendras svoris: 33 000 kg, Good day, We hereby offer you, without obligation, a used, complete bale press line consisting of a baler from HSM, type VK 8818 R-FU including conveyor technology and wire feed stations. Hnjdpfxoyz Af Eo Admok The following technical data have been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we cannot accept any liability. Technical data – press: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Pressing force, main press: 1000 kN Specific pressing force: 120 N/cm² Pressing force, shearing edge ejector: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm; variable length, 600 up to 2000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights at a bale length of approx. 1.2 m: 650 – 750 kg/bale, depending on material Hydraulic oil tank capacity: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Overall press dimensions assembled: 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions (press with conveyor system): 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of the press: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Special equipment ordered additionally: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with identical output performance Manual switching on/off of the number of wire ties to save strapping wire on non-expansive materials Shearing edge ejector with 121 kN pressing force Sensor-based wire monitoring with press shutdown in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the press: The entire press line (baler and conveyor system) is in good, immediately operational condition. The system was cleaned weekly by the operator, lubricated and serviced as specified by the manufacturer. Technical data – chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Incline belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: HSM VK 8818 R-FU baler Maintenance platform Bale chute Wire feed stations Wire roll trolleys (without wire rolls) Stadler chain belt conveyor KF 1800 Transverse sliding belt conveyor Pit cover from feed conveyor to pit Second control cabinet for press operation at the conveyor Machine documentation in English Delivery time: The entire line is already dismantled, stored, and can be loaded at short notice after receipt of payment. We would be pleased if this or one of our other baling presses is of interest to you. Your Service Team Mertens & Frowein GmbH

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, aušinimo tipas: oras, lazerio bangos ilgis: 1 064 nm, The LAS 28 XLe universal laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. Hnedpewlc Stofx Admsk The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after initial setup. Furthermore, the software is capable of reading data (such as drawing numbers, project names, etc.) from existing tables and automatically transferring them into predefined fields. The use of a handheld scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available upon request. Made in Germany Fiber laser: 30 Watt, 20 Watt or 50 Watt • Laser class 1 • Wavelength: 1064nm • Marking field size: 150x150 mm (optionally larger) • Signal lamp for operational status indication • Optional: rotary axis (3-jaw chuck) • Optional: fume extraction (including activated carbon filter) • Optional: digital height measurement system • Optional: autofocus system for automatic determination of focal distance • Marking software EZCAD in German / English (other software upon request) • Pilot laser (easy preview, plain text preview) • Focus finder (easy focus adjustment) • Max. workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touch screen and keyboard tray, height adjustable • Aluminum profile frame • Air cooled • Door width: approx. 700 mm / Door height (pass-through): approx. 400 mm • Connection: 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH); with monitor arm approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, įėjimo dažnis: 50 Hz, lazerio galia: 20 W, lazerio bangos ilgis: 1 064 nm, nuskaitymo srities ilgis: 110 mm, nuskaitymo srities plotis: 110 mm, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts or, for example, nameplates. Due to its compact design, the system is very practical and can be used almost anywhere. The device is very easy to operate without any programming knowledge. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior configuration. Furthermore, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 20-watt fiber laser (Optional: 30-watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110mm - Marking software EZCAD in German / English - Pilot laser (for simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) Hjdpfx Ajw Et Ilodmjnk - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For durable markings, the use of lasers has become indispensable in many industries. The powerful laser software allows text, numbers, 2D codes, QR codes, and logos to be created easily and with just a few clicks, without advanced programming skills. Serial and article numbers can be incremented automatically after configuration. Additionally, the software can read data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. Use of a handheld scanner is also supported. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as side extensions for long parts, movable Z-axis, drawer systems, etc., are also available. Furthermore, programmable, software-controlled axes (X, Y, Z axes) and database connectivity are possible. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optional) • Marking software: EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic determination of focal distance • Optional: programmable X, Y, and Z axis (software controlled) Hnjdpfowkpvvsx Admek • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Signal light for operating status indication • Max. workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made from aluminum profile • Air-cooled • Door width: approx. 700 mm / door pass-through height: 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, The universally deployable laser marking system LAS 28 by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 Watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without advanced programming knowledge. The software can automatically sequence serial and part numbers after prior configuration. Additionally, it can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with mounting bracket and Windows operating system. Optionally, the LAS 28 laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options such as side outriggers for marking long parts are available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – for automatic determination of focal distance • Signal tower to indicate operating status • Marking software EZCAD (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Maximum component height approx. 270mm • Electrically adjustable Z-axis (working plane adjustment) • Aluminum profile frame • 230V connection • Air cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660mm (L x W x H) Hnsdpov Sybyofx Admsk • Weight: approx. 80 kg

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 560 kg, bendras ilgis: 1 870 mm, bendras plotis: 1 040 mm, bendras aukštis: 1 550 mm, suslėgto oro jungtis: 6 juosta, pozicionavimo tikslumas: 0,01 mm, kartojimo tikslumas: 0,01 mm, sukimosi greitis (maks.): 60 000 aps./min, įvesties srovės tipas: trifazis, Semi-automatic Depaneling / Base machine with Parallel Shuttle The dynamic depaneling machine LOW 4322 is specifically designed for medium to high product volumes, meeting increasing demands in the production process. PCB panels of a wide range of materials are separated with high product flexibility, precision, and throughput using low-dust, low-stress sawing and milling techniques. High-dynamic linear motor axes, tools, and grippers meet the highest quality standards, guaranteeing the depaneling system exceptional durability and reliability. Made in Germany Semi-Automatic Depaneling – Tailored Solutions The LOW 4322 depaneling machine allows rapid product changeover while maintaining short depaneling and handling times. PCB panel loading is achieved with a parallel shuttle; clamping and fixation are implemented with pin clamping technology and, when required, combined with vacuum suction cups. This machine is equipped with: Hodpjxt Dmxefx Admjnk • A shaft and disc tool separation module on the Z-axis (automatically rotatable 0-90°) • X-Y cross-feed module featuring linear motor technology with high-resolution measuring system • Dual loading module designed as a parallel shuttle, separated left and right with sliding doors • Aluminum profile frame with two maintenance doors – left and right • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Work area of 420 x 330 mm • Automatic milling cutter length management (only in conjunction with shaft separation module) • Remote maintenance/support via remote connection (TeamViewer) or customer-provided access • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Milling cutter breakage control for shaft cutters only • Prepared for vacuum clamping technology • ESD protection window and sliding doors An optional dust extraction unit can be retrofitted. The high performance of the depaneling system, with its standard saw or milling module, fully automatic cutter length management, vision-assisted teach-in camera system, and two individually loaded PCB fixtures, can be expanded with numerous customer-specific adaptations and equipment options (e.g., camera vision system). Precision laser axis calibration prior to commissioning is part of the personalized customer service for all inline and stand-alone depaneling systems from Systemtechnik Hölzer.

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Gamintojas: Fasti GmbH Hodpfxovzwrbs Admonk Tipas: ERD 65 B Prijungiamoji galia: 0,9 kW

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 100 h, 5 pieces: • Gravimetric screw feeder • Feed hopper with pneumatic rotary flap, each with cover Hnjdpfx Aet S Rduedmek • Screw conveyor for Big Bag discharging with height-adjustable individual frame 1 piece: • Trough screw conveyor for combining and conveying dosing materials into a transfer container 5 pieces: • Big Bag discharge station with suspension traverse, preventing the Big Bag from collapsing during emptying • Big Bag bottom plate with discharge aid (vibration drive) Option not included in the price: Control cabinet incl. control system Delivery: EXW

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Lėtai veikiantis smulkintuvas (Langsamläufer) Pjovimo plotis - 150 mm Variklio galia - 2,2 kW Rotoriaus greitis - 200 aps./min. Rotoriaus peilių skaičius - 9 vnt Hnjdpfx Adoyf I N Asmok Statoriaus peilių skaičius - 2 vnt Turime 8 vnt., būklė puiki Našumas iki 25 kg/val. Kaina - 1000 EUR/vnt.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Įrenginį galima apžiūrėti vietoje – prašome iš anksto susitarti dėl susitikimo. Hsdey Atqnspfx Admjnk

Būklė: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, bendras svoris: 13 500 kg, rotoriaus skersmuo: 470 mm, valdymo spintos ilgis: 2 800 mm, valdymo spintos plotis: 600 mm, valdymo spintos aukštis: 2 100 mm, rotoriaus ilgis: 2 000 mm, galia: 220 kW (299,12 AG), sukimosi greitis (maks.): 80 aps./min, pildymo angos plotis: 1 650 mm, pildymo angos ilgis: 2 060 mm, sietų perforacija: 50 mm, įėjimo įtampa: 400 V, Galingiausias modelis: Micromat 2000 V2 Pagrindiniai varikliai: 2 x 110 kW, 400 V/50 Hz Valdymo spinta: pilnai su dažnio keitikliu Rotoriaus greitis: prie 50 Hz apie 80 aps./min. Rotoriaus peiliai: 104 vnt. Nauji Hjdpfeyxxk Ssx Admonk Rotoriaus peilių forma: 43x43x19,5 mm Įpylimo anga: Ilgis x plotis 2030 x 1650 mm Rotoriaus ilgis: 2030 mm Rotoriaus darbinis skersmuo: 560 mm Nubrozdinimo šukos: taip Prispaudimo peiliai: taip Hidraulinė stotis: pilna Hidraulinis cilindras sietams: sietai 50x50 mm Bendras svoris apie 13,5 t Matmenys Ilg.xPlot.xAukštis mm: apie 6500 x 2970 x 2660 mm Peržiūra ir bandomasis paleidimas galimi pagal susitarimą. Įskaitant piltuvą Pristatymo terminas: iš karto

Gamybos metai: 2015, veikimo valandos: 780 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: sn:CAI858663, Parduodamas ALUP Sonetto 15 500 sraigtinis kompresorius – patikimas pramoninis įrenginys – BENDRAS DARBO LAIKAS: 780 VALANDŲ!!! Parduodamas ALUP Sonetto 15 500 sraigtinis kompresorius, geros techninės būklės, tinkamas nuolatiniam pramoniniam naudojimui. Hnedpfx Aeyzhmbodmjk Pagrindinės techninės specifikacijos: Galia: 15 kW Oro rezervuaras: 500 litrų Darbinis slėgis: 8–10 bar Oro našumas: apie 1,8–2,4 m³/min Tipas: sraigtinis kompresorius ant talpyklos Aušinimas: oro aušinimas Valdymas: integruotas elektroninis valdiklis Būklė: Darbo valandos: 780 valandų Reguliariai prižiūrimas/aptarnautas Alyvos ir filtrų būklė: pakeisti paskutinio aptarnavimo metu Šiuo metu veikiantis / galima išbandyti Šis kompresorius pasižymi patikimu ir stabiliu veikimu, puikiai tinka dirbtuvėms, pramoniniam naudojimui ir automobilių servisams. Papildoma informacija: Vieta: Djoras / Vengrija Galimas transportavimas/pristatymas susitarus Kaina: 7 700 EUR (derinama) Dėl detalesnės informacijos prašome kreiptis telefonu arba žinute.