2015Y. Kesmak Juostinis Pjūklas pirkti naudotą (6 224)

Būklė: naujas, Gamybos metai: 2026, A versatile saw for cutting wood into veneers, slats, and similar materials. Workpiece height up to 400 mm. The powerful feed rate enables very high productivity. The R800 is a robust saw. It can accommodate bands of various widths. It features a mechanical feed system for the workpiece and is designed to perform reliably under heavy main motor load and high processing speeds (up to 30 m/min). A band width of up to 80 mm is possible. The machine's sturdy frame is constructed from welded sheet steel. Massive cast iron flywheels ensure maximum efficiency, and the wheels are mounted on dustproof ball bearings. The lower section of the saw blade is specially reinforced, allowing for a higher level of inertia without excessive startup or braking loads. To further enhance smooth operation, the guides are specially ground to ensure precise balancing. Wheel diameter: 800 mm Max. cutting height: 400 mm Max. cutting width: 770 mm Table height from floor: 960 mm Table size: 1060 x 800 mm Blade length: 5530/5380 mm Max. blade width: 80 x 0.8 mm Motor: 11 kW (15 HP) Flywheel speed: 680 RPM Blade speed: 28.5 m/sec Extraction: 1 x Ø 100 mm, 2 x Ø 120 mm Required extraction capacity: 3840 m³/h Compressed air consumption: 60 L/min Operating pressure: 6 - 8 bar Net weight: 880 kg RVP210 Roller height: 50 mm Drive roller diameter: 200 mm Ledpjgp I U Nefx Aaujaa Standard towing rollers: 2 pcs Standard roller square height: 300 mm Roller square length: 600 mm Roller square tilt: 0-45° Maximum roller-blade opening: 200 mm Maximum square blade opening: 420 mm Motor power: 0.37 kW Variable feed speed: 0-30 m/min Compressed air consumption: 30 L/min Operating pressure: 3 - 6 bar Net weight: 180 kg

Būklė: naujas, Gamybos metai: 2025, The machine is designed to cut both soft and hard wood, as well as wood blocks, into lengths compatible with the machine's construction. It can process both dry and fresh (green) timber. This model is equipped with a powerful petrol engine. The absence of a power supply connection offers greater mobility and independence. The maximum cutting length depends on the number of extensions used (optional equipment). In its standard configuration, it is 2.72 m. Petrol engine (LIFAN, manual start + key) 15 HP Displacement: 420cc Laedpfx Aajgykfvouoa Maximum workpiece dimensions: 790 x 178 x 2794 mm Band blade dimensions: 3670 x 34 x 0.9 mm Band speed: 17 m/min Tooth pitch: 22 mm Wheel diameter: 475 mm Overall dimensions: 4064 x 1778 x 1800 mm Track dimensions: 4042 x 900 mm Transport dimensions P1: 1800 x 550 x 810 mm; P2: 2000 x 140 x 95 mm Weight: 312/344 kg An additional 2-metre extension costs 350 euros (excluding VAT).

Būklė: naujas, Gamybos metai: 2025, 7.5 kW electric motor 400 V capacity, 3 phases Maximum workpiece dimensions: 790 x 178 x 2794 mm Saw band dimensions: 3960 x 34 x 0.9 mm Band speed: 17 m/s Tooth pitch: 22 mm Wheel diameter: 480 mm Dimensions: 4064 x 1778 x 1800 mm Track dimensions: 4000 x 1030 mm Transport dimensions: 2150 x 610 x 810 mm Weight: 352/380 kg Additional 2-meter extension costs €350 excl. VAT Lajdeid I A Espfx Aauja

Būklė: naujas, Gamybos metai: 2026, Roll diameter: 700 mm Max. cutting height: 460 mm Cutting width: 680 mm Table height from floor: 940 mm Table dimensions: 1030 x 710 mm Tilting work table: 20° (45° non-CE) Max./Min. blade length: 5040/180 mm Max. blade width: 40 x 0.6 mm Motor power: 3 kW (4 HP) Wheel speed: 736 RPM Extraction hood: 2 x Ø 100 mm Dimensions: 2300 x 1415 x 880 mm Compressed air consumption for pneumatic braking (CE): - Net weight: 400 kg Gross weight (crate): 490 kg Gross weight (box): 520 kg Lajdpogyd Skjfx Aauja Shipping volume: 2.30 m³ Sound power level: 88.9 dB

Būklė: naujas, Gamybos metai: 2026, 15 hp petrol engine (LIFAN, manual start) Capacity: 420 cc Maximum workpiece dimensions: 790 x 178 x 2794 mm Lajdpolk Dyiefx Aauea Cutting band dimensions: 3670 x 34 x 0.9 mm Band speed: 17 m/min Tooth pitch: 22 mm teeth Wheel diameter: 475 mm Machine dimensions: 4064 x 1778 x 1800 mm Track dimensions: 4042 x 900 mm Transport dimensions P1: 1800 x 550 x 810 mm P2: 2000 x 140 x 95 mm Weight: 312 / 344 kg Additional 2-meter extension costs 350 euros, excluding VAT Motorized height adjustment

Būklė: naujas, Gamybos metai: 2025, 27 hp petrol engine (LONCIN, electric start) Displacement 764 cc Maximum workpiece dimensions: 910 x 4800 mm Saw blade dimensions: 4576 x 40 x 0.9 mm Ljdshg Ahnepfx Aauoaa Blade speed: 17 m/min Tooth pitch: 22 mm Wheel diameter: 508 mm Manual feed Machine dimensions: 4064 x 1778 x 1800 mm Extension: 6000 x 1010 mm Transport dimensions: 2080 x 750 x 830 mm Weight: 722/782 kg Chassis option available

Būklė: naujas, Gamybos metai: 2026, Automatinis ir rankinis veikimas – galimas nepertraukiamas arba paleidikliu valdomas režimas Hidraulinis svirties nuleidimas – tolydus padavimo reguliavimas, be perkrovos rizikos Pjovimo kampo diapazonas: -45° iki +60° – greitas nustatymas be medžiagos nuėmimo Galingas 1500/1100 W variklis (2/4 polių) – didelis našumas net ir pjaunant storus profilius 2 juostos greičiai: 34 ir 68 m/min – pritaikomi pagal medžiagos tipą Stabili konstrukcija – 285 kg – be vibracijų, didelis tikslumas Greito prispaudimo spaustuvas – greitas medžiagos keitimas serijinėje gamyboje Siurblinis aušinimas – ilgesnis juostos tarnavimo laikas, geresnė pjovimo kokybė Lajdpfsyi Uq Uox Aausa Automatinis išsijungimas po pjovimo 400 V | Trifazis prijungimas 50 Hz Variklio galingumas 1500 / 1100 W Juostos greitis 34 / 68 m/min Juostos matmenys 2740 × 27 × 0,9 mm Skriemulio skersmuo 305 mm Pjovimo kampų diapazonas 45°K | 30°K | 15°K | 0° | 15°D | 30°D | 45°D | 60°D Aušinimo siurblys 45 W Aušinimo bakelio talpa 16 l Grynoji masė 285 kg Triukšmo lygis 68–71 dB

Būklė: geras (naudotas), 6 galvų horizontali daugiajuostė juostinė pjūklas Pjūklo skriemulio skersmuo: 915 mm Juostinio pjūklo plotis (maks.): 100 mm Standartinis pjūklo greitis: 35 m/s Ljdoy Auxaspfx Aaujaa Maksimalus medienos plotis: 305–450 mm Maksimalus pjūklo atidarymas iki grandinės stalo: 305 mm Padavimo grandinės iki pjovimo linijų: 292 mm Pagrindinis variklis: 6 x 18,5 kW Padavimo greičiai (kintami): 15–60 m/min standartinis, 7,5–30 m/min (pasirinktinai) Padavimo tipas: vidaus viršutinis padavimo mechanizmas su grandinėmis, sinchronizuotomis su grandinės stalu Operatoriaus valdymo pultas su greičio valdymu ir paleidimo/stabdymo funkcijomis Darbinis aukštis: 800 mm

Būklė: naujas, Gamybos metai: 2026, Roller diameter 600 mm Cutting height 480 mm Dimensions (L/W/H) 5200x1600x1850 mm WINTR VERTICAL 2-HEAD BAND SAW V2KB-480 The vertical twin-head band saw type 480 TWIN has been designed for high-performance processing of stacked wood as well as small-diameter logs. The machine allows for simultaneous double-sided cutting of cants from round timber and prepares the material for further processing. The 480 TWIN model is used as the first element in a technological line for cutting and edging logs, especially for the production of pallet components. Thanks to the use of two saw heads, two cutting passes can be performed simultaneously with high dimensional accuracy. The construction is based on a robust steel frame, a precise band saw guide system, and a feed system with steplessly adjustable feed rate. The hydraulic blade tensioning ensures optimal working conditions for the saw blades and guarantees a stable cutting process. Technical Data: Dimensions · Length: 5200 mm · Width: 1600 mm · Height: 1850 mm Operating Parameters · Feed table height: 850 mm · Maximum raw material diameter: 480 mm · Raw material length: 800 – 3000 mm Ledoy Ehy Nopfx Aauoaa · Thickness of produced cant: 45 – 300 mm · Feeding speed: 0 – 20 m/min Cutting System · Number of heads: 2 · Band saw length: 4000 mm · Band saw width: 40 – 50 mm · Guide wheels: 600 mm · Hydraulic blade tensioning · Cut width measuring system: ANP 05 Drive and Power Supply · Main motors: 2 × 5.5 kW · Feed motor: 0.75 kW · Power requirement: 12 kW · Power supply: 3-phase 400 V Performance · Average output: 7 – 8 m³/h* *Output depends on material type, operator, and feeding system. Advantages: Production · High output for processing thin and medium-diameter raw material · Simultaneous operation of two heads shortens cutting time · Accurate, dimensioned semi-products for further processing Economy · Lower material losses compared to circular saw technology · Optimized energy consumption relative to output · Reduced manual processing costs Organization · Usable as part of a complete production line · Easy to operate with short operator training time · Robust construction for multi-shift operation

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, bendras svoris: 2 000 kg, Behringer HBP263A(1000-KGT Ljdeywr Stopfx Aaueaa Mašina puikios būklės Paketo spaudimo prietaisas Vienkartinis medžiagos padavimas 1000 mm x 999 Dviguba aušinimo sistema: lašelinė alyva ir aušinimo skystis Techniniai duomenys: Pjovimo diapazonas 90° (apvalus/kvadratas): 260 mm / 260 x 260 mm Pjovimo diapazonas 90° (plokščias): 300 x 260 mm Pjovimo greitis (reguliuojamas): 20–120 m/min Juostos matmenys: 4640 x 34 x 1,10 mm Pjūklo variklio galia: 3,00 kW Bendra galingumo poreikis: 8,00 kW Minimalus pjovimo ilgis / diametras: 10 mm / 15 mm Mašinos svoris: apie 2000 kg Matmenys (I x P x A): apie 2,60 x 1,60 x 1,90 m Į komplektą įeina 5 nauji pjūklo juostos - Padavimo ir priėmimo ritininis stalas - Pilna originali techninė dokumentacija Mašiną galima apžiūrėti Głoskowe, netoli Varšuvos Galima organizuoti transportavimą į bet kurią ES vietą

Būklė: naujas, Būklė: nauja Sandėlio numeris: 060027 Pristatymo laikas: iš karto, su sąlyga, kad neparduota anksčiau Kilmės šalis: Turkija Kaina: 7 700 € Lizingo norma: 148,61 € Sandėlyje: 1 vnt. Pjūklo rėmas: pasukamas rėmas Juostinio pjūklo matmenys: 2730x27x0,9 mm Juostos greitis: 35/70 m/min Pjovimo galimybės 0° apvalus: 230 mm Pjovimo galimybės 0° kvadratinis: 230 mm Pjovimo galimybės 0° plokščias: 320x130 mm Pjovimo galimybės 45° apvalus: 210 mm, kvadratinis 190 mm Pjovimo galimybės 60° apvalus: 130 mm, kvadratinis 100 mm Pjovimo galimybės -45° apvalus: 180 mm, kvadratinis 150 mm Darbinis aukštis: 805 mm Hidraulinio variklio galia: 0,37 kW Variklio galia: 1,3 kW Aušinimo siurblio variklis: 0,12 kW Ilgis: 1350 mm Plotis: 700 mm Aukštis: 1300 mm Svoris: 430 kg Pasukamas pjūklo rėmas Nuolatinis nuleidimo reguliavimas su hidrauliniu cilindru Hidrauliškai pakeliamas pjūklo rėmas Lasdswirybjpfx Aauea Mechaniniai greito prispaudimo spaustuvai Aušinimo įrenginys Staklių pagrindas Drožlių surinkimo lovys Naudojimo instrukcija vokiškai arba angliškai PASIRINKTINAI: Ritininiai konvejeriai ir pjūklo juostos pagal užklausą

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 14–16 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 29 800 € Lizingo įmoka: 569,18 € Pjūklo rėmas: pasukamas rėmas Juostos matmenys: 3660x27x0,9 mm Juostos greitis: be pakopų valdymo, 15–120 m/min Pjovimo galia 0° apvalus: 320 mm Pjovimo galia 0° kvadratas: 320 mm Pjovimo galia 0° plokščias: 350x320 mm Pjovimo galia 30° apvalus: 170 mm, kvadratas: 150 mm Pjovimo galia 45° apvalus: 260 mm, kvadratas: 220 mm Pjovimo galia 60° apvalus: 320 mm, kvadratas: 280 mm Darbinis aukštis: 740 mm Hidraulinio variklio galia: 1,1 kW Variklis: 2,2 kW Servovariklis: 1 kW Aušinimo siurblio variklis: 0,12 kW Ilgis: 2120 mm Plotis: 2100 mm Aukštis: 1810 mm Svoris: 1810 kg NC valdymo pultas Servo padavimo sistema su rutulinių sraigtų pavaromis Hidraulinis spaustuvas Hidromechaninis juostos įtempimas Lsdpfxjwirhls Aaujaa Inverteris Aušinimo siurblys Pjūklo juosta Drožlių šepetys Apsauginis jungiklis Aukščio reguliavimas Naudojimo instrukcija VOKIEČIŲ arba ANGLŲ kalba PASIRINKTINAI (KAINOS PAGAL UŽKLAUSIMĄ): Hidraulinė paketų spaudimo įranga Volelių stalai ir pjūklų juostos

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 14 - 16 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 9400 € Lizingo įmoka: 181,42 € Pjovimo rėmas: pasukamas rėmas Pjūklo juostos matmenys: 2730x27x0,9 mm Juostos greitis be pakopų: 35-70 m/min Pjovimo pajėgumas 0° apvalioms detalėms: 230 mm Pjovimo pajėgumas 0° kvadratinėms detalėms: 230 mm Pjovimo pajėgumas 0° plokščioms detalėms: 240x230 mm Darbinis aukštis: 590 mm Hidraulinio variklio galia: 0,37 kW Variklis: 1,3 kW Aušinimo siurblio variklio galia: 0,12 kW Ilgis: 1700 mm Plotis: 800 mm Aukštis: 1500 mm Svoris: 530 kg Drožlių šepetys Valdymo pultas Aukščio reguliavimas jungikliu Hidromechaninis juostos įtempimas Mechaninis viršutinis tvirtinimas Medžiagos ilgio ribotuvas Aušinimo siurblys Pjūklo juosta Saugos jungiklis Lsdpswiqw Eefx Aausaa 1,2 m ritininis takas Eksploatavimo instrukcija VOKIEČIŲ arba ANGLŲ kalba PASIRINKIMAI: Ritiniai ir pjūklo juostos pagal užklausimą

Būklė: naujas, Gamybos metai: 2026, CORMAK HBS275 Bandsaw for cutting pipes, profiles, and bars is widely used in all locksmith workshops where precision, quality, and cutting speed matter. This model is equipped with a swiveling arm (0-60°), and the saw guides are based on carbide inserts. The frame design ensures precise and quiet operation. Machine Features The horizontal bandsaw for metal with a swiveling arm allows cutting perpendicular to the axis of the material and at any angle from 0 to 60°. Material can be fed manually or by any mechanical device; however, tool feed is automatic. The blade guides are fitted with special carbide plates and bearings. This significantly influences the band guidance, blade life, straightness, accuracy, and cutting quality. Carbide guidance greatly reduces machine and blade wear. The machine is fitted with an efficient coolant pump with a closed-loop cooling system. The saw arm is made from a single-piece cast iron, and with the 27 mm wide cutting blade used in this bandsaw, allows for series cuts of both profiles and solid materials. The vise is placed on an adjustable bed and features a quick-release clamp. The blade guides have hard metal carbide plates and a bearing system. It is specifically THE CARBIDE GUIDES that are responsible for cutting precision and straightness. The arm is fitted with an automatic blade tension sensor and is inclined at 25 degrees, increasing blade life. A cleaning brush is mounted underneath the arm to ensure optimal blade cleanliness and operation. The drive is transmitted via a worm gear. The base is fitted with a cast iron working table with a swiveling arm and a control panel on a separate arm. During cutting, the primary cutting movement is the translation of the blade, while the feed is by the descending arm. The arm descent speed (cutting speed) is adjusted by a hydraulic cylinder. Feed speed is regulated on the control panel. Two cutting speeds are available: 37.5 and 75 m/min. In the arm's lower position (after cutting), the drive to the cutting blade is switched off automatically. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle ends or any guard is opened. Additional protection results from the automatic machine switch-off in the event of a broken blade. The machine drive is transmitted by a motor with a worm gearbox. The motor features a thermal fuse to prevent overheating during operation. Technical Data TOTAL POWER: 1.5 kW Lasdpfx Aajudi Uneuja POWER SUPPLY: 400V 50Hz ARM DESCENT ADJUSTMENT: hydraulic cylinder BLADE LENGTH: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VISE BASE HEIGHT: 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg ANGLE 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100 The price does not apply to machines purchased in Poland.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Čekijos pusiau automatinis juostinis pjūklas TMJ 502 - Strypo pjovimo skersmuo: 500 mm Lasdpjywcgzofx Aauea - Gabaritai: 450x500 mm (modifikavus spaustuvą galima pjauti 650x500 mm) - Aušinimo skysčio siurblys - Hidraulinis spaustuvas - Svoris: 1500 kg - Juosta: 5370x41x1,3 mm - Originali dokumentacija

Būklė: naujas, Gamybos metai: 2026, The KS 652 is a double-column, semi-automatic band saw designed as the ideal work tool for professionals who need to cut bars, pipes, profiles, and other metal construction components—with the ability to cut at angles up to 60° to the left and right. Machine Description: The KS series saws are the only machines in their class that allow cutting both to the left and right—simply set and close the vise. Once the material is in place, the user can set the angle and rotate the saw bow without having to reopen the vise or reposition the bar. The vise moves transversely across the worktable, ensuring quick access. The cutting frame is constructed from electro-welded tubular steel, guaranteeing high stability during cutting. Like all IMET saws, the KS model features a high blade tension (2000 kg/cm²) and a 6° canted blade, which improves material feed, reduces loading, and optimizes cutting performance even for large cross-sections and solid materials. A wide worktable provides full support for the material. The machine is very user-friendly and easy to operate thanks to the automatic stop system covering 0° to 60° left/right and the angle scale on the table that makes positioning easier. For increased cutting precision, IMET saws are equipped with an angle deviation detection system. A mechanical material detection system ensures rapid approach to the material by automatically identifying the first point of contact; the end of the cut is managed by a microswitch in the blade guide, ensuring precise blade positioning through hardened rollers and auxiliary bearings. All working parameters and settings are controlled via an independent, mobile console with LED indicators for blade tension, blade guard, motor overheating, and power check. Lsdoyym I Ujpfx Aaujaa The console allows the operator to set the following machine parameters: blade speed, descent speed, and end-of-cycle management (selectable: return of the bow with halted blade, return of the bow with running blade, or end of cycle without bow return). Cutting performance can be further increased by opting for a 4 kW motor, hydraulic blade tensioner, and a high-tension hydraulic system (2200 kg/cm²). Technical Specifications: POWER SUPPLY: 3-phase 400V TOTAL POWER: 3 kW BOW DESCENT ADJUSTMENT: Hydraulic, infinitely variable CUTTING SPEED: 15–100 m/min VISE BASE HEIGHT: 844 mm BLADE DIMENSIONS: 5320 x 34 x 1.1 mm DIMENSIONS: 1895 x 2870 x 2300 mm WEIGHT: 2100 kg

Būklė: naujas, Gamybos metai: 2026, The CUBO 400 NC model is a modern band saw that provides user safety thanks to a guard made of specially designed metal sheets, protecting all four sides and all moving parts of the band saw. The guard system enables full access to the machine and ease of maintenance. Ljdeyym Eajpfx Aausaa An innovative and user-friendly 7" touchscreen with an intuitive interface allows complete control over all machine settings. It is possible to program up to 99 cutting programs and 10 different cutting lengths on the same bar. CNC control gives access to all operational functions: automatic calculation of blade thickness, number of stroke repetitions, band speed, and blade lowering speed. The interface also allows monitoring the CUBO work status and troubleshooting using a self-diagnostic function. An integrated feeder for automatic repetition of the cutting process. The feeder moves on a hardened and chromed guide; high positioning accuracy is ensured by precise feeding with a ball screw and backlash-free (self-braking) motor, mounted on a floating plate to compensate for loads when working with irregular bars. The saw body features a rigid cast iron construction made of square-section tubes, ensuring high resistance to deformation and improved performance with all types of material. The bow is equipped with an endless screw and a crown made of highly durable bronze alloy. The mechanical material detection device allows rapid blade approach to the material, automatically detecting the first cutting point. The end cut is controlled by a microswitch on the blade guide, enabling perfect band positioning thanks to hardened metal pads and additional bearings. IMET automatic machines can be connected to the company network and used remotely via the SAWFACTORY system and modem. SAWFACTORY is dedicated software that allows process management from the office by setting programs and monitoring operation via a web application. The software also enables remote technical support. Technical parameters: SUPPLY: 3 phase 400V TOTAL POWER: 2.2 kW ARM DESCENT CONTROL: Hydraulic with stepless adjustment CUTTING SPEED: 18-110 m/min VICE BASE HEIGHT: 890 mm BLADE DIMENSIONS: 4020 x 34 x 1.1 mm FEEDER LENGTH: 515 mm END SCRAP: 80 mm MINIMUM MATERIAL LENGTH: 15 mm DIMENSIONS: 1950 x 1800 x 1990 mm WEIGHT: 990 kg

Būklė: naujas, Gamybos metai: 2026, Powerful band saw, featuring a pivoting arm adjustable from -45° to +60°, portable quick-action vise, blade tension gauge, and hydraulically lowered arm with stepless adjustment. Additionally equipped with an ergonomically designed control panel ensuring safety and user comfort. Maximum cutting width is 490 mm. Distinctive features of the band saw include: - The blade tension wheel is fitted with a dial gauge tension meter, providing precise tension indication for optimal cutting results and blade longevity. - The saw frame is rigid, manufactured from cast iron, and resistant to torsion. High-quality drive wheels, fitted inside the frame, support the cutting blade. - The control panel is ergonomic, with clearly marked buttons for main power, start, stop, coolant activation, and blade speed selection (slow/fast). An emergency stop button is also present, compliant with the latest EU safety standards. - The hydraulic cylinder control is mounted on the panel column, allowing precise adjustment of the arm lowering speed and activation. - The drive system is stable thanks to high-grade, hardened, and ground gears. The powerful motor is proportionally matched to the material being cut. - Blade guidance is secure with bearing guides, adjustable to the width of the workpiece. - An auto-stop feature automatically cuts power when the arm reaches its lowest position. - The vise is robust, reliably clamping workpieces; a material stop is included. - The hydraulic cylinder is reinforced, enabling precise arm lowering speed adjustment via a potentiometer. The arm swivels from -45° to +60°, with lifting force adjustable by a spring. - An efficient coolant system is integrated into the saw base. - Workpieces can be rapidly clamped in the vise, which can be re-positioned to either side for angled cutting. - The package includes a coolant collection pan with pump. - The saw’s solid body is cast iron, guaranteeing stability during operation. - The saw arm can be locked in place. - The base is rigid, allowing work at approximately 95 cm height – standard configuration with the machine. Additional advantages: Other features include adjustable blade speed (35/70 m/min), quick-release vise, pivoting arm from -45° to +60° with scale readout, a full-featured unit with excellent value for money, a robust construction for precise, smooth, vibration-free operation, continuously adjustable hydraulic arm lowering, durable carbide roller guides, reinforced bronze worm gearbox, automatic end-stop, and coolant system as standard equipment. Technical specifications: Laodpfxsv R Tgts Aausa Working height – 870 mm Cutting speed – 35/70 m/min Band saw blade dimensions – 3770 x 34 x 1.1 mm Band saw blade width – 34 mm Coolant system pump power – 0.1 kW Total power – 2.8 kW Voltage – 400 V Dimensions (W x D x H) – 2200 x 1400 x 1500 mm Weight – 630 kg

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 380 V, pjovimo aukštis (maks.): 600 mm, pjovimo plotis (maks.): 550 mm, valdymo tipas: vadovas, pavaros tipas: elektrinis, bendras aukštis: 2 600 mm, bendras ilgis: 18 000 mm, bendras plotis: 3 500 mm, bendras svoris: 4 184 kg, Įranga: dokumentacija / vadovas, variklio stabdis, Parduodamas vertikalus plataus juostos pjūklas JAROMA DRCC-110 – pjūklas su padavimo vežimėliu, rąstų manipuliavimo sistema, išilginiu padavikliu ir rąstų įstūmikliu. Skirtas išilginiam rąstų pjovimui į lentas ir tašus. Pjūklo atraminių ratų skersmuo – 1100 mm. Pjovimo greitis – 38 m/s. Vežimėlio darbinis greitis – 1–40 m/min. Juostinio pjūklo plotis – 130 mm. Labai tinka kreivų rąstų pjovimui. Komplekte rąstų sandėlio skersinis padaviklis. Ljdpfx Aeyqx Uyeausaa

Būklė: naudotas, Techniniai duomenys: Pjovimo skersmuo: 260 mm Juostinio pjūklo ilgis: 4310 mm Juostinio pjūklo plotis: 27 mm Pjovimo sritis ties 90 laipsnių, apvalus: 260 mm Pjovimo sritis ties 90 laipsnių, kvadratas: 260 x 260 mm Juostos greitis: 17 - 110 m/min Elektros prijungimas: 400/50 V / Hz Bendra galia: 3,5 kW Apytikslis mašinos svoris: 1000 kg Mašinos matmenys apie Ilg x Pl x Aukšt: 2,3 x 1,0 x 1,4 m Matmenys Ilg x Pl x Aukšt: 3,0 x 0,4 x 0,8 m Lajdpfx Aajy Dc N Ajuoa

Gamybos metai: 1988, būklė: geras (naudotas),

Būklė: naudotas, Gamybos metai: 2008, Medžiagos padavimas bet kokio ilgio (maks. eiga 610 mm) Pjovimo skersmuo: apvalus 510 mm, plokščias 500 x 500 mm Pjovimo greitis reguliuojamas valdikliu: 25–235 m/min Drožlių transporteris Yra naudojimo instrukcijos, elektros schemos ir atsarginių dalių sąrašai Ledjvxqtaepfx Aaujaa Tik apie 5 000 pjovimo valandų Daugiau techninių duomenų nuotraukoje arba pagal užklausą Staklių svoris: apie 3 t Labai gera būklė

Būklė: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 380 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, DAUGIAPJŪVĖ PILA COSMEC SM 400 Techniniai duomenys: • Vikšro plotis: 400 mm • Didžiausias pjovimo aukštis: 160 mm • Didžiausias pjūklo disko skersmuo: 350 mm • Sklandus padavimo greičio reguliavimas Laedpfx Asytcrujauja • Automatinė tepimo sistema • Apsauga nuo atatrankos • Lygiagretusis liniuotė • Ištraukimo antgalio skersmuo: 260 mm • Avarinis išjungiklis • Maitinimas: 380 V • Pagrindinio variklio galia: 34,5 kW GAMYBOS METAI: 2000

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, pjovimo aukštis (maks.): 500 mm, pjovimo plotis (maks.): 800 mm, Įranga: CE žymėjimas, – DTR dokumentacija lenkų kalba TECHNINIAI PARAMETRAI: Laodpfx Aoyuf Tqsausa – smagračio skersmuo: 815 mm – maks. pjovimo aukštis: 500 mm – maks. pjovimo plotis: 800 mm – stalo matmenys: 1030 x 600 mm – stalo pasvyrimas: 0° – 20° – juostos matmenys: 5643 x 38 x 0,65 mm – juostos greitis: 20 m/s – S1 variklio galia: 4,5 kW – didelis pakreipiamas ketaus stalas – aukštos kokybės plieno konstrukcija – tikslus pjovimo juostos vedimo virš ir po stalu sistema – ratai dengti guma, padidina juostos ilgaamžiškumą – gabaritiniai matmenys (ilgis/plotis/aukštis): 122 / 77 / 254 cm – svoris (netto/bruto): 680 / 770 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Hello, For sale: MebaEco 335 DGA bandsaw. Fully automatic, CNC-controlled. The machine has been refurbished, is fully operational, and prepared for work by an authorized Meba bandsaw service center in Poland. The machine has undergone a thorough inspection; all parts requiring replacement or repair have been consistently identified and replaced. Technical specifications of the saw: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm • Table height: 750 mm • Feed range: from 5 to 2300 mm per stroke • Cutting area at 90°: flat materials 500 x 335 mm • Cutting range at 45°: approx. 330 mm • Cutting area at 45°: flat materials 320 x 335 mm • Circular cutting at 45° (left side): 305 mm • Cutting area at 45° (left): flat 305 x 335 mm • Maximum cutting range at 30°: approx. 180 mm • Cutting area at 30°: flat 170 x 335 mm • Cutting speed: steplessly adjustable from 15 to 150 m/min • Maximum material load: 250 kg/m • Total installed power: 3.0 kW Once programmed, the machine auto-feeds the material for cutting using a feed vise. Additionally, you can observe the saw in operation in the attached video. If you wish to see the machine in person, this is not a problem. The saw is currently stored in our warehouse. Ledsyzqv Sepfx Aauoaa For any questions, please contact me by email :)