Hidraulinės plokštinės žirklės + sūpuoklinis lankstymo staklės

LOTZE T 1000 / 5,5

Sąlyga: geras (naudotas), Viessmann Refrigeration/Freezing Chamber External dimensions: 5700 x 3000 x 2450 mm Internal dimensions: 5420 x 2700 x 2150 mm Panel thickness: 150 mm Stock status: 1 unit available Rbedpfx Ahoiauifs Het Easy-to-assemble chamber Compressor unit and evaporator included We offer many other refrigeration devices, such as: refrigeration units, compressors, evaporators, condensers, chillers, cold rooms, refrigerated and gastronomic furniture, as well as machinery and equipment for restaurants and meat processing. Check our other listings or call us – not all equipment is listed on Machineseeker.

Sąlyga: naudotas, Stainless Steel Welded Tube Production Line, Model 70/120, manufactured by OLIMPIA 80 Equipped with tricatodic welder, seam roller and orbital polishing system Rjdpfxevtn H Tj Ah Hebt Specifications: - Diameter: 35 – 120 mm - Wall thickness: 0.7 – 3.5 mm - Length: 3 – 6 m Tube diameter: 35 – 120 mm Tube length: 3 – 6 m

Sąlyga: naujas, galinis atmušas: 750 mm, - Capacity 1050 x 6 mm - NC electric backgauge Rbedjgg N Hbspfx Ah Hjt - Foot switch - Rear photoelectric safety guard - Support arms - Cutting line illumination - Brake motor - Emergency stop - Documentation - Weight 1800 kg - 400V

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l Rbedpfxsfxyhfo Ah Hot The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, paskutinio kapitalinio remonto metai: 2023, For sale: a complete and fully operational steel sheet roll forming line for processing coils (e.g., Magnelis) into various profiles such as C-type, commonly used in photovoltaic installations and solar farms, steel hall and shelter construction, as well as furniture manufacturing, etc. Rodpsu A U Utjfx Ah Hobt The line, including the decoiler, is installed in a heated hall under near-laboratory conditions. Buyers can test run the machine before purchase. I have contacts for companies supplying custom roll forming toolsets for specific profiles, as well as for companies specializing in upgrading and expanding such machines. Further information is available exclusively by phone; I do not respond to written messages. A VAT invoice will be issued for the production line. --- Located in Poland, near the border with Ukraine (Krosno city).

Sąlyga: visiškai atnaujintas (naudotas), SCHLATTER MG24 Welded Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer warp wires: 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Minimum spacing between warp wires: 100 mm Spacing between weft wires: 25 – 250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24 MG 24.1/8C MESH WELDING MACHINE, Standard Equipment Includes: - 1 Machine base frame - 1 Upper support for press reception, continuously adjustable via handwheel - 1 Magnet holders with holding magnets and monitoring of weft wires - 1 Row of pneumatic solenoid valves for press actuation - 1 Air and water system - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front from 25 – 250 mm, adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION Includes: - 8 C-type transformers - Rated power per transformer: 100 kVA - Secondary open-circuit voltage: 7.1 V - Secondary rated current: 14 kA - 8 ES 130 thyristor contactors - 12 Welding presses: 5.0 kN - 12 Warp wire current bridges for 50–100 mm warp wire spacing - 12 Warp wire current bridges for 100 mm stepped warp wire spacing - 10 Warp wire current bridges for 100–150 mm warp wire spacing - 8 Warp wire current bridges for 150 mm stepped warp wire spacing - 6 Warp wire current bridges for 150–200 mm warp wire spacing - 6 Warp wire current bridges for 200 mm stepped warp wire spacing - 24 Lower copper electrode holders with standard angular electrodes, each with a water-cooled current cable, width: 58 mm - 24 Wire holding clamps Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 – 1,600 mm Spacing between extreme warp wires: max. 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Spacing between warp wires: min. 100 mm Weft wire spacing: 25–250 mm Warp wire diameter: 4.0 – 12.0 mm Rjdewu Tu Djpfx Ah Hsbt Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24

Gamybos metai: 1978, Sąlyga: labai geros būklės (naudotas), Technische Details: - Hersteller: DRAWEBA - Modell: DDANS 17 l - Baujahr: 1978 - Drahtdurchmesser: 1,4 – 1,6 mm - Maschenöffnung (min.): 10 x 10 mm - Maschenbreite: 1.600 mm Rjdpfslf Iqnex Ah Hebt

Gamybos metai: 2015, Sąlyga: naudotas, Parduodama W ir C profilio gamybos linija Skirta kelio atitvarų, stulpelių ir tvirtinimo elementų gamybai. Pilnai sukomplektuota linija, tinkama nuolatinei pramoninei gamybai. Liniją sudaro: Du dekoileriai Stulpelių gamybos linija Parapetų gamybos linija Rbodpfx Ajxhf R Ijh Hot Du presai tvirtinimo detalėms gaminti Techniniai parametrai: Ilgis: 17 m Plotis: 1 m Aukštis: 1 m Variklio galia: 22 kW Svoris: 18 t Gamybos metai: 2015 Gamintojas: Chengxing Machinery (Kinija) Paskirtis ir privalumai: Ši W ir C profilio gamybos linija pritaikyta įvairių kelių saugumo elementų gamybai: atitraukiamųjų kelio atitvarų, atraminių stulpelių bei tvirtinimo detalių. Įranga užtikrina patikimą, stabilų ir nuoseklų gamybos procesą. Įrenginys yra paruoštas apžiūrai. Jei turėsite daugiau klausimų – mielai atsakysime.

Gamybos metai: 2004, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 0441057, Offer 23300 Technical Specifications: - Belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm Rjdpfxspug D Es Ah Hobt - Support vice – angle adjustable: 90° to 30° - Belt speed: 15 + 30 m/sec - Possible contact wheel diameters: Ø 20 – 76 mm - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW - Drive speeds: 1440 / 2880 rpm - 1 piece contact wheel: 48 mm - Required space approx.: W 800 x H approx. 1000 x D 1300 mm - Weight approx.: 250 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1114.3705-24, Used CNC lathe Manufacturer: Boehringer Model: VDF 250Cm Year of manufacture: 1997 VDF Boehringer 250C This machine includes the following features: - 1000 mm turning length - No tailstock - Driven tools - Special swivelling chuck - Siemens 840C control system Redpfowlap Aex Ah Hjbt The Boehringer VDF 250 Cm is a CNC lathe designed for the machining of chuck components. It stands out for its robust construction and precise machining capabilities. Technical data (Model year 1997) Working area: - Swing diameter over bed: 550 mm - Swing diameter over cross slide: 480 mm - X-axis travel: 405 mm - Z-axis travel: 1,099 mm - Max. turning length: 1,000 mm (Tailstock: None) Turret: - Number of stations: 12 - Tool holder: VDI 50 DIN 69880 - Driven tools: YES Spindle: - Spindle nose: Size 8 DIN 55026 - Spindle bore: 103 mm - Max. chuck diameter: 315 mm - Max. drive power (50% duty cycle): 53 kW - Max. torque: 780 Nm - Speed range: 30–3,000 rpm Feed rates: - Automatic feeds: 1–10,000 mm/min - Rapid traverse speed: 10 m/min (X and Z axes) - Max. feed force: 15 kN Dimensions and weight: - Machine dimensions (L × W × H): approx. 5,400 × 3,200 × 2,400 mm - Machine weight: approx. 11,000 kg Equipment: - Swivelling control panel - HYDROKRAFT hydraulic system - Coolant system with 600 l tank, pump pressure max. 5.5 bar, flow rate 60 l/min, pump power 1.1 kW - Chip conveyor with 325 l tank capacity, discharge to the right - 3-jaw power chuck - Oil mist extraction - Electrical cabinet with cooling unit and temperature controller by RITTAL Control system: - SIEMENS SINUMERIK 840 C Variants and Differences There are various models in the VDF 250 series, such as the VDF 250 CU, equipped with different control systems (e.g. PHILIPS B2T) and technical specifications. Some models feature driven tools and a tailstock, while others are pure chuck machines designed without a tailstock. Conclusion The Boehringer VDF 250 Cm is a versatile CNC lathe, noted for its stability and precision. Its durable construction and comprehensive range of features make it ideally suited for machining chuck components in diverse production environments.