Briaunų klijavimo staklės

Lange B90 KFE

Būklė: naujas, Gamybos metai: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with discharge function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece feed, and integrated distance control for contactless management of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer tape, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. - 3 free slots for finishing units - 10" color touchscreen Machine length: 4030 mm Workpiece thickness: 8 - 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (approx. 200 mm with corner copying) Edge thickness: 0.4 – 3.0 mm Pre-milling unit cutting depth: 0 – 2.0 mm, stepless Total installed power: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Bjdpfx Ajw I U Drea Dodf Options: - Surcharge for radius scraper unit with air-blast device + extraction - Surcharge for flat scraper unit + extraction - Surcharge for buffing unit - EVA/PUR glue pot with discharge function - Surcharge for diamond tools, height = 65mm, for pre-milling unit - Riepe spray device (anti-adhesive) at pre-milling unit - Riepe spray device (cleaning spray before buffing unit) - Pipe system with 90° elbow + hand slider, mounted on machine, D = 200 mm Availability: short-term Location: Hochheim

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Brandt KDF 1440 Edition Only 1700 operating hours – in very good condition – can also be supplied with XES 200 stand-alone preheating station (+ € 4500,-) SUMMARY OF UNIT CONFIGURATION: - Jointing Milling Unit: 2 x 2.2 kW, 200 Hz - Gluing Unit QA 65 N - End Trimming Unit, Chamfer/Straight: 2 x 0.18 kW - Pneumatic Adjustment for End Trimming (Chamfer/Straight) - Multi-Stage Milling Unit MS 40, Counter-Rotation - Pneumatic 2-Point Adjustment - Profile Milling Unit: 1 x 0.35 kW WD 60; also suitable for construction floors - Pneumatic 2-Point Adjustment for Radius/Chamfer - Multi-Stage Scraper Unit MZ 40 - Glue Joint Scraper - Buffing Unit - Top Pressure: PU rollers instead of standard rollers - Additional glue application unit QA 65 N (interchangeable) - Release Agent Spraying Unit for workpieces - Automatic edge feeding - Multiple roller tracing for multi-stage milling unit MS 40 + multi-stage scraper MZ 40 - Cleaning agent spraying unit WORKPIECE AND EDGE PARAMETERS: – Min. workpiece width: – For workpiece thickness 8-22 mm: 70 mm* – For workpiece thickness 23-40 mm: 120 mm* – For workpiece thickness 41-60 mm: 150 mm* *Depending on workpiece length – Workpiece overhang: 38 mm – Workpiece thickness: 8 – 60 mm – Max. edge height = workpiece height + 6 mm – Edge material (roll): 0.4 – 3 mm – Max. edge cross-section: – For PVC: 135 mm² – For veneer: 100 mm² – Max. roll diameter: 830 mm – Edge material (strips): 0.4 – 8 mm – Max. edge cross-section (strips): 360 mm² – Feed speed: 8 – 14 m/min – Max. feed speed with contour milling: 11 m/min – Working height: 950 mm – Pneumatic connection: min. 6 bar – Total length: 5,573 mm Bsdpfx Aezb Iggja Djdf Complete description: see PDF

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application for straight workpieces (EVA-PUR glue pot with drainage function optional), 2-motor high-frequency cross-cut saw unit with tiltable motors, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece tracking, and integrated line control for contactless management of processing functions. Suitable for ABS, PVC, melamine, and thick wood veneer rolls, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 12.0 m/min.; 8.0 m/min. with corner copying. • 3 free slots for finishing units • 10" color touchscreen. • Two counter-rotating, demand-driven pre-milling units with diamond-tipped spiral cutters ensure clean, tear-free jointing of workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, designed leak-proof, with bottom glue reservoir (excess glue is automatically returned to the glue pot), finely metered glue application via glue roller, separately adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine remains switched on but unused for extended periods). Optional: EVA/PUR glue pot with drain/cleaning function for fast color changes Optional: Quick-change system for glue pots Bedsl Rix Nepfx Aa Dedf • Automatic strip magazine with spiked roller for wooden laths. • Pressure zone consisting of a powered pressure roller running synchronously with the glue roller and two smaller, oppositely tapered spring-loaded pressure rollers. • High-frequency cross-cut saw equipped with two HF motors (0.55 kW, 12,000 rpm), 2 saw blades, and high-precision linear guides for clean and precise cuts, equipped with extraction hood, manually tiltable. • High-frequency combination milling station: 2 powerful 0.55 kW HF motors with special HM-WPL cutters. • Corner copying unit: Automatic machining of edge corners up to 2 mm edge thickness. Equipped with a 0.27 kW high-frequency motor, switchable from the control panel. Choice of single-sided (front or rear edge) or double-sided corner copying. • Rotatable control panel with 10" color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtime, on/off of units, and fault diagnostics, including digital meter counter for edge material consumption. • LED lighting in the cabin. • Riepe spray systems for anti-stick, NFLY, and cleaning agents optionally available. Optional finishing units (3 free slots): • Radius scraper unit: Lightly scraping cut removes any milling traces in the radius and ensures a perfect finish. Fine adjustment via digital counter. • Flat scraper unit: Lightly scraping cut cleans the workpiece surface of any glue residues at the glue joint. • Buffing unit: 2 motors, each 0.09 kW, 1,500 rpm, deliver a superb finish for ABS and PVC edge materials.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt glue application for straight workpieces (EVA/PUR glue pot with draining function optional), HF end trimming saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece sequence, and integrated track control for contact-free operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll materials, as well as fixed lengths from 0.4–3.0/6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner rounding • 3 free spaces for finishing units • 10" color touchscreen display. • Automatic edge feeding for roll material via rotating turntable D=800 mm • Two opposing, program-controlled pre-milling units with diamond-tipped spiral jointing cutters ensure clean, chip-free workpiece edges before edge banding • Long infeed fence (650 mm) with support • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leakproof, bottom-feed glue supply (excess glue is automatically returned to the glue pot), precise glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby function (prevents glue from burning if the machine remains on but is not used for an extended period). Optional: EVA/PUR glue pot with draining/cleaning function for rapid color change • Automatic strip magazine (70 mm holding capacity) with spiked roller for solid wood lippings • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, counter-conically operated spring-loaded pressure rollers, ensures optimal edge joint with workpiece; pressure zone can be adjusted via digital counter • High-frequency end trimming saw equipped with 0.35 kW HF motor, 12,000 rpm, two saw blades and high-precision linear guides for clean, accurate cuts; extraction hood included • High-frequency combination milling station, two powerful 0.55 kW HF motors with HM-WPL special cutters, suitable for radius, flush, and chamfer milling; horizontal and vertical tracing of the workpiece; unit adjustment equipped with digital counters for different edge types; two chip extraction hoods with central Ø 100 mm connectors; height adjustment of top unit linked to upper pressure system • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness; equipped with 0.27 kW HF motor, switchable from control panel. Selectable single-sided (front or rear edge) or double-sided corner copying. • Swiveling control panel with 10" color touchscreen for controlling glue temperature settings, automatic temperature reduction in standby, on/off for units and fault diagnostics; including digital meter counter for edge material consumption • LED lighting inside the safety cabin • Riepe spray systems for anti-adhesive, NFLY and cleaning agents available as options Bdedpfx Aaod R U Ags Dof Optional finishing units (3 free spaces): • Radius scraping blade unit: Light scraping action removes potential milling traces for a perfect finish.

Būklė: geras (naudotas), SCM MINIMAX ME 25 - CE Standartas – Automatinis kraštų laminavimo staklės stalių, baldų, nestandartinių baldų, plokščių, durų, virtuvių ir kt. gamybai – CE Standartas – Metai 2017 Techniniai duomenys: - Briaunos juostos storis 0,4–3 mm - Maks. briaunos storis 5 mm - Min/maks. panelės aukštis 12/50 mm - Panelės padavimo greitis 7 m/min - Darbo stalo aukštis 904 mm - Min. panelės ilgis/plotis 190/65 mm - Aukšto sukibimo dantytas padavimo diržas - Panelės atraminis ritininis konvejeris per visą staklių ilgį Komplektacija: - Klijavimo mazgas: Klijų bako talpa 1 kg – Variklio galia 0,18 kW - Galo apipjovimo mazgas: Variklio galia 0,37 kW – Disko skersmuo 90 mm Z 20 – Disko apsisukimai 12000 aps./min - Apipjovimo mazgas: Viršutinio ir apatinio variklio galia 0,75 kW – Vidia frezos skersmuo 75 mm Z 4 – Frezos apsisukimai 12000 aps./min - Briaunos gramdiklio mazgas, skirtas PVC/ABS briaunų apdailai - Klijų gramdiklio mazgas likučiams pašalinti Bdedpfszfapmox Aa Def - Siurbimo anga 120 mm - Matmenys mm 1950 x 700 x 1250 h - Svoris kg 430

Būklė: naujas, JLT-Klemmregalsysteme für Massivholz-Kanten- und Flächenverleimung Bdjdpfxob Evnko Aa Djf Ein robustes und vielseitiges Spannsystem, das speziell für die Kanten- und Flächenverleimung von Massivhölzern, sowohl Hartholz als auch Weichholz, entwickelt wurde. Das Klemmregal (bzw. Plattenpresse) ist in zwei Standardgrößen erhältlich und eignet sich ideal für die Herstellung von Komponenten wie Platten, Rahmenholz, Treppenbauteilen, Arbeitsplatten, Blockverleimungen, Tischplatten usw. Auch Rahmen können eingespannt werden. Die patentierten "Equalizer"-Klemmarme verfügen über mehrere wichtige Funktionen, die bei anderen mechanischen Spannsystemen nicht zu finden sind und eine hochwertige Leimfuge gewährleisten. Sie lassen sich an jeder beliebigen Stelle im Rahmen positionieren und können leicht zur Seite oder in eine andere Reihe versetzt werden. Bei Nichtgebrauch können die Klemmarme platzsparend vertikal an einer oberen Traverse aufgehängt werden. Für die Flächenverleimung von Material bis zu 150 mm Stärke sind optional sogenannte Rocker Plates erhältlich, die einfach über die oberen und unteren Klemmbacken geschoben werden und so den Anpressdruck gleichmäßig verteilen. Mit dem Klemmtyp 401 und Rocker Plates kann Material bis zu 200 mm Stärke verleimt werden. Die Standard-Öffnungsweite des Klemmarms beträgt 1.020 mm, größere Größen sind auf Anfrage lieferbar.

Būklė: naudotas, Gamybos metai: 2001, Ruoinio storis min./maks.: 6/45 mm; briaunos storis: 0,4 - 3 mm; didž. briaunos aukštis: 51 mm; minimalus briaunos juostelės ilgis: 350 mm; maksimalus briaunos perviršis aukštyje iš abiejų pusių: 3 mm; minimalus ruošinio plotis: 60 mm; minimalus ruošinio ilgis: 180 mm; bendras ilgis: 3700 mm; plotis: 1440 mm; didž. aukštis: 1970 mm; ruošinio įėjimo aukštis: 850 mm; svoris: apie 850 kg. Sandėliavimo vieta: Nattheim. Bdedpfxjy Dd Iyj Aa Dof

Būklė: naudotas, Gamybos metai: 1997, naudotas, geros būklės Gamintojas Spänex Tipas SMU 4500 Pagaminimo metai 1997 Mašinos Nr. 4500-97/59 Švaraus oro įrenginys / neigiamas slėgis GS dulkių patikrintas CE tipo patikrintas Variklis 5,5 kW Jungties skersmuo 250 mm Slėgis 2400 Pa Oro našumas 4250/3530 m³/h nominali oro srauto apimtis Bdedpjw U Emqsfx Aa Dof Išleidimo talpos 2 vnt. po 230 l Filtro plotas 22 m² Filtro valymas automatinis/pneumatinis Naujos kaina apie 15.000,00 EUR Užimamas plotas apie 2070 mm x 900 mm x 1965 mm Svoris apie 600 kg Sandėlio vieta 97447 Gerolzhofen, laisvai pakrauta, neįpakuota Perdavimas esamoje, kaip apžiūrėta, būsenoje, be garantijos ir atlygintinumo

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Bedjy Emw Hepfx Aa Dedf Automatic edge banding machine with cartridge-based gluing system for processing wood, PVC, ABS, and veneer edges. Suitable for furniture, panel materials, custom production, kitchens, bathroom furniture, joineries, and much more – CE standard compliant. Technical Specifications: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine Features: Automatic feed for coil and strip materials Cartridge glue system allowing in-process change between EVA and PUR glue or glue color 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunctional trimming unit with controlled axis for flush and chamfer trimming, each with 2 motors of 0.6 kW Flat scraper unit Radius scraper unit Buffing unit Soundproofing hood Control System: Rotatable and tiltable operator panel All units individually addressable Function display with text and graphics Pre-selection display of units Program list with names and numbers, self-diagnosis Approx. machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1000 kg INCLUDES OTT Rondomat corner rounding unit Used Machinery Notice: • Subject to technical changes and prior sale. • Prices are ex works – loaded, ready for transport! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if your address and telephone number are provided!)

Būklė: naujas, Gamybos metai: 2025, Naujas įrenginys Pagaminimo metai: 2025 Kompaktiškas ir lankstus net ir mažiausioje erdvėje. Tik 2,13 m ilgyje ruošiniai čia įgauna galutinę apdirbimo kokybę. Įrenginyje sumontuotas 1,1 kW didelio dažnio variklio klijavimo mazgas su deimantu dengtų spiraliniu frezu, teflonu dengtas klijavimo mazgas, priešpjovimo modulis ir daugiafunkcis HF frezavimo modulis. 2 laisvos vietos apdailos agregatams, pvz., plokštuminiam grandikliui ir poliravimo moduliui. Paprastas valdymas per 3,5 colių spalvotą lietimui jautrų ekraną. Techniniai duomenys Staklių ilgis: 2122 mm Ruošinio storis: 10–45 mm Ruošinio plotis – min. apie 120 mm Briaunos storis: 0,4–2,0 mm Briaunos aukštis max. = ruošinio aukštis + 4 mm (2+2) Elektra: 400 V Bendras galingumas: 3,6 kW Padavimo greitis: 6,5 m/min Pneumatinis prisijungimas: 6 bar Grynasis svoris: apie 490 kg Pasirinkimai: Plokštuminiam grandikliui skirtas modulis Bdodey Eizzepfx Aa Dsf Deimantiniai įrankiai aukštis = 45 mm Vieta: Flörsheim Prieinamumas: trumpai laukiant