Strypų šlifavimo staklės

Löwer LS 200

Gamybos metai: 2012, būklė: paruoštas naudoti (naudotas), Eight identical label dispensers are available. Speed: 0-80 m/min, throughput: 1000 labels/min, dimensions: length 700 mm, width 320 mm, height 500 mm, including accessories. Itedsflmc Nspfx Agfed

Būklė: naudotas, Number of sanding units: 4 pcs. Sanding width: 190 mm Max. sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from top/bottom Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. High-stability premium version with innovative features. Designed for high continuous load even with greater material removal. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from top and bottom 1st sanding unit: heavy steel roller 2nd sanding unit: rubber-coated roller and shoe 3rd finishing unit: fiber brush (see optional equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and longer belt life - Forced pneumatic belt oscillation - Effective dust extraction directly at the sanding rollers Itedevu Hgbopfx Agfsd - Airborne dust extraction at tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment below via precision lead screw with scale ring (resolution 0.1mm) - Pneumatic belt tensioning with constant tension pressure - Quick belt change with pneumatic belt release in seconds - Adjustable sanding belt tracking during belt changes - Electropneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip and adhesive-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical Data: - Belt speed: 22 m/s - Belt length: 1,800mm - Belt width: 200mm - Working width: 190mm - Sanding thickness: 2–180mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200mm at 0.37 kW each - Extraction ports: 2 x 180mm, 2 x 120mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with Softdisc 2,740mm): 2,600mm - Length with control panel (with Softdisc 3,035mm): 2,985mm - Width: 880mm - Height: 1,910mm - Approx. weight: 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air blow-off 4-belt via nozzles directly at the radii ...

Gamybos metai: 1990, būklė: dilaminuotas dirbtuvėje (naudotas), Four-side planer WEINIG, 7-head, universal, head configuration: bottom horizontal, right vertical, left vertical, right vertical, top horizontal, bottom horizontal, and final universal head. Drive is implemented using cardan shafts. Head protection with Rotax safety clutches. Workpiece feed clamped pneumatically. Continuously adjustable feed through frequency inverter. Feed speed: 0–42 m/min. Motors: 2.5 kW and 7.5 kW. Table reground and new. Additionally equipped with new wiring and new electrics. Machine fully refurbished. Warranty provided. Iedpfx Aspqxnxjgfstd

Būklė: naudotas, Darbinis plotis: 610 mm Galandimo aukštis: 200 mm Variklio galia: 4,4 kW Padavimo greitis: 7-14 m/min. Mašinos svoris: apie 1.150 kg Sunkioji storio obliavimo mašina Bäuerle 125/02 tipas, skirta tiksliam masyvo ir medienos plokščių matmenų apdorojimui (storio obliavimui). Tvirta konstrukcija ir galingas pavaros mechanizmas užtikrina vienodus obliavimo rezultatus ir ilgą tarnavimo laiką. Įskaitant priedus. Itodpfowy Itlex Agfed Obliavimo velenas: juostiniai obliavimo peiliai Z4

Būklė: naudotas, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single Wood Sanding Machine Ø Sanding from below/above Ø With 2 offset sanding units each (below and above) Ø Sanding units (below and above) arranged in series according to the planing principle Ø Pre-sanding with coarse grit (calibration) Iodpfx Ast Tqy Ejgfetd Ø Fine sanding with fine grit (finishing) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper feed units Ø Oscillating use of sanding belts (during the sanding process) Ø Absolute power connection via 5.5 kW motors and large-dimensioned drive drums Ø Oxide-ceramic sanding shoe for: - precise surface geometry - no need for readjustment - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy-duty welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration damping. Offset sanding units with large-scale belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust, with sealing brushes and integrated sanding belt air-blast system to extend sanding belt service life. Sanding units made from heavy steel plate design as a basis for vibration-damped, smooth belt running. Absolutely backlash-free guides using ball linear sets made from hardened and ground shafts. Height adjustment of sanding units via hardened and ground special linear guides and preloaded guide carriages. Lasting precision due to dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers serve as contact rollers. Contact rollers and sanding shoes are optimally matched to the sanding belt grit load. The large-dimensioned drive drums guarantee full transmission of the sanding motors’ 5.5 kW output to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation. This enables maximum stock removal. Automatic machine stop trigger in the event of belt breakage. Optical indicator at the control panel and machine warning beacon. Finishing sanding shoes are completely maintenance- and wear-free, made from oxide-ceramic for optimal heat dissipation. Sanding belt tension by appropriately dimensioned pressure springs. Sanding belt release for belt changes using a pneumatic system for sensitive, distortion-free installation of new belts. Upper sanding unit and brushing device are centrally motorized, height-adjustable with digital display at the control panel for motorized sanding thickness adjustment. Integrated brushing and finishing device for improved surface finish, built into the main machine. Two vertically-aligned special brush rollers, 150 mm diameter, operating in the same direction as the feed. Separate height adjustment of the brush rollers using precise slide guides for wear compensation. Additional conveyor roller for removing or further transporting the workpiece out of the sanding machine, coupled with the transport belt. Wood guide at entry for hard, double-sided...

Būklė: naudotas, Gamybos metai: 2012, Integrated NC machining centre for windows and doors, comprising: A) Automatic loader model "SP" Automatic loader for Base SP No. 1 profiling machine - Automatic loader consisting of: - Table with motorised belts - Automatic device for transferring parts from the buffer to the loading area of the profiling machine * Min. workpiece length: 450 mm, max.: 3200 mm * Min. workpiece width: 40 mm, max.: 230 mm * Min. workpiece thickness: 40 mm, max.: 120 mm * Work cycles: 10/min * Chain feed speed on table: 7 m/min * Loading table dimensions: 2800 x 2150 mm B) Automatic profiling machine model SUPERSET NT C 6 Position 1 = Planing spindle Position 2 = 1st right vertical spindle Position 3 = 1st left vertical spindle Position 4 = 1st upper horizontal spindle Position 5 = 1st lower horizontal spindle Position 6 = Beading recovery unit Entry level 2500 mm Feed speed 6-36 m/min via frequency inverter No. 1 - Motor power 5.5 HP (4 kW) Horizontal pressure unit before planer with pneumatic disengagement from plate Pneumatic disengagement from the control panel for the infeed unit before the planing spindle Tandem infeed unit before right vertical spindle, fast disengagement Infeed units after the upper spindles to reduce piece span from 620 mm to 450 mm Entry guide with bearings for automatic feeder Electrical setup for the use of automatic loader Manual central lubrication Pump for lubricating work surface with automatic drive System for inline integration with INTEGRA SYSTEM - Working height raised to 970 mm - Entry signal light (traffic light) - Piece counter Independent control cabinet POS. 1 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) T-SET quick tool clamping system - Allows locking/unlocking the tool with a simple air gun POS. 2 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Vertical spindle with 180 mm usable length T-SET quick tool clamping system Electronic vertical positioning POS. 3 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) High-precision spindle Vertical spindle with 180 mm usable length T-SET quick tool clamping system Electronic horizontal positioning POS. 4 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Speed 8,300 rpm T-SET quick tool clamping system Electronic vertical positioning Isdsixxwmjpfx Agfotd POS. 5 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Speed 8,300 rpm T-SET quick tool clamping system POS. 6 Beading recovery unit Includes: PRL enables automatic transition from planing to beading function and vice versa. - Spindle group with 30 mm shaft diameter, 30 mm length - Electronic horizontal positioning - Electronic vertical positioning - Hardware and PLC modifications for axis management - Tandem outfeed and modified

Būklė: naudotas, Number of sanding units: 2 Sanding width: 190 mm Maximum sanding height: 4–180 mm HESS GLORIA – 2-BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer’s Description: ---- Compact design constructed according to modern principles. Quiet and vibration-free operation thanks to a torsion-resistant, stable machine housing and special insulation. Safety features compliant with EU Machinery Directive, certified as “dust tested.” Offset sanding units equipped with large tension rollers for effective heat dissipation and stable belt guidance. Sanding units with forced sanding belt oscillation. Two-point sanding dust extraction directly at the sanding drum. Airborne dust extraction at the large tension rollers. Integrated sanding belt air-blow system for extended belt lifespan. Integrated brush and finishing device, adjustable by threaded spindle, with large dust extraction. Motorized adjustment of sanding thickness for the entire upper unit via precision lead screws and linear ball sets on hardened and ground precision shafts, protected against dust and dirt. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe proportioned for optimal grit load. Hardened and ground sanding rollers. Maintenance-free and wear-free oxide-ceramic sanding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional stability. Sanding belt tensioning via pneumatic cylinders. Belt change by pneumatically actuated belt release. Adjustable belt tracking during belt change. Electro-pneumatic pressure monitoring of compressed air supply with visual fault indicator. Automatic machine stop upon belt breakage or if infeed safety device (with integrated wood thickness control) is triggered. Visual indicator on control panel. Feed device and proven, calibrated, non-slip transport belts on precision-ground tables and spring-mounted pressure rollers. Cardan drive for consistent wood feed. Continuously variable feed speed. Chip removal adjustment via precision lead screw with scale ring (resolution 0.1 mm). Ergonomically arranged controls on the machine front: Top sanding and brush unit, bottom sanding and brush unit, workpiece transport, sanding thickness setting, operation indicators, fault indicators. Integrated control panel with lockable main switch. All motors electrically protected against overload. Itedpfxjv D Rg Do Agfed Technical Data: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Shortest workpiece length: 300 mm Feed speed: Infinitely adjustable, 5–25 m/min Sanding belt dimensions: 200 mm wide, 1600 mm long Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 – 2500 m³/h, 20–25 m/sec Extraction connection ports: 2 x 160 mm diameter, top of machine housing External dimensions: Length: 1600 mm ...

Būklė: naujas, Number of sanding units: 8 pcs. Sanding width: 180 (260) mm Max. sanding height: 160 mm Dimensions (L/W/H): 3065x1600x1900 mm Machine weight approx. 1500 kg LÖWER-Leistomat SD ----- Automatic fine sanding machine for wood sanding (smoothing, denibbing, and edge breaking) or intermediate sanding of profiled window bars. Features Softdisc technology for visible surfaces as well as automatic profile and width adjustment. - 2 side-mounted lamella roller units, 0.75kW each, L=120mm, D=200mm 1 top-mounted softdisc unit Ø=200mm, 0.75kW, 1 top-mounted lamella roller unit L=200mm, 0.75kW, 1 bottom-mounted softdisc unit Ø=200mm, 0.75kW, 1 bottom-mounted lamella roller unit L=200mm, 0.75kW, 2 side-mounted lamella roller units, 0.75kW each, L=120mm, D=200mm - All sanding units feature linear guidance via linear ball bearing sets on hardened shafts - Time-controlled dipping of all lamella roller units directly over the entering edges of the workpieces. This dipping allows the units to be set deeper into the profiles. - Motorized workpiece thickness adjustment - Variable sanding lamella speed via frequency converters for adjusting the sanding intensity (separate for discs, wide rollers, and side rollers) - Disc units as Softdisc with hook-and-loop fastening for sanding discs (wood sanding) - Infeed via three lower and one upper conveyor belts and spring-loaded pressure rollers, with infinitely variable speed 4–15m/min - Touch panel adjustment of parameters: workpiece thickness, workpiece width (left side units individually), dipping depth of side units, spindle speed, feed speed - Parameter storage as machine programs in program mode - Operation in automatic mode with non-contact workpiece width detection and profile recognition as well as automatic adjustment of sanding units to workpiece width and profile shape (workpiece height is preset) - Pneumatically sequenced powered infeed roller, automatic clamping of the workpiece, and feeding after unit adjustment - Signal lights red/green for operation status indication - Shortest workpiece length: 380mm - Conveyor belt width: 200mm - Max. workpiece width: 180mm (260mm possible with flipping process) - Workpiece height: 12–160mm - Extraction ports: 4 x 100mm and 2 x 80mm diameter - Sensor-controlled tool air blast directly at the discs - Housing dimensions (L x W x H): 3065 x 1600 x 1900 mm - Total length: 4365 mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500 kg - Operating voltage: 400V, 50Hz, 3-phase, air connection 6 bar - CE compliant ----- Price of the above machine on request! ----- Optional accessories (surcharge): Set of replacement lamella strips for Leistomat SD-200 consisting of Wide units: 30 strips EH45 / 200 - 7 (rollers) 30 strips EH45 / 200 - 20 (rollers) Rabbet units: 96 strips M55 / 120 - 4 SmartFlex lamella disc Ø200 solid with 30 grooves 50mm long Set of replacement lamella strips for SmartFlex lamella disc consisting of 60 strips M35 / 50 K 180-7 S Sanding disc VB for Softdisc D=200mm, grit 220 with velour (hook-and-loop), pack of 100 pcs. Sanding disc VB for Softdisc D=200mm, grit 280 Iodpevnv Uhofx Agfetd with velour (hook-and-loop), pack of 100 pcs. -----

Būklė: naudotas, SCM TYPE UNO 900 mm šlifavimo staklės Itsdpfxjx I R Sms Agfed

Būklė: naudotas, Gamybos metai: 1982, bendras svoris: 950 kg, Šlifavimo juostos ilgis 2200 mm, šlifavimo juostos plotis 400 mm, stalo ilgis 1200 mm, naudingoji aukštis 120 mm, šlifavimo plotis 390 mm, šlifavimo juostos greitis apie 21 m/s, padavimo greičiai 6 - 11 - 16 m/min, pagrindinis variklis 7,5 kW, padavimo variklis 0,26 - 0,55 - 1 kW, pneumatinė juostos oscilacija ir juostos išpūtimas, įskaitant važiuoklę Itodpfxoxq Ehxj Agfod