Edgebander

HOMAG KAL 210 AMBITION 2264

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 20 mm, ruošinio plotis (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is ready for immediate use! TECHNICAL DETAILS Bonded edge thickness: max. 20 mm Maximum gluing height: 60 mm Maximum roller material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: max. 25 m/min Feed: continuous Electrical height adjustment: available Pressure: upper belt pressure Preheating zone: available Granulate glue system: with prefabricated container Glue pot: interchangeable/variable Spray unit: available Pre-milling unit: available Trimming unit: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left-hand side Quick change units: available Nkodpsx Tqgbjfx Af Iot MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special equipment: with nesting - new chains - HOMAG feed device 2 rollers - HOMAG A 20 gluing unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile pull scraper unit PN 10 - HOMAG FA 11 finishing unit

Sąlyga: naudotas, Gamybos metai: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, regularly serviced (last service by Homag in 11/2024) Equipment and technical data: Minimum workpiece thickness: 12 mm Maximum workpiece thickness: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) Minimum edge thickness: 0.3 mm (coil material) / 0.4 mm (strip material) Maximum edge thickness: 3 mm (coil material) / 20 mm (strip material) Feed speed: infinitely variable, 18–25 m/min (frequency controlled) Adhesive type: EVA hot-melt glue Adhesive application (pot / cartridge / nozzle): Melt unit with granulate container Adhesive volume / cartridge size: Granulate container, melting capacity 18–35 kg/h, level controlled Heat-up time: approx. 8–10 min Nedpfewx Aaqsx Af Ijkt Edge magazine (positions): 2 rolls (automatic roll change) Automatic edge change: yes (automatic via PC22, manual switching possible) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: Kapp unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel/straight) Flush trimming: via pre-milling unit, pneumatically adjustable Radius milling: FK13 contour milling unit, automatic 8-position tool changer (R = 2 mm) Bevel/profile milling: yes, via FK13, pneumatically adjustable Scraper: integrated in multi-finishing unit MN21 Polishing: buffing unit in finishing unit FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece pre-heating: available Release agent spraying device: above / below, Type 2929 (F.01) Extraction ports: several Ø 100 mm (individual extraction for each unit) Control system: power control PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / standards: CE compliant according to EC Directive 98/37/EC Dimensions / Space requirement: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system shown in the photos is not included in the scope of delivery! Availability: short notice Location: 63934 Röllbach

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007575, Type of applied edge: thin edge, thick edge Nksdpfx Afeybawwo Iet Glue system: EVA Jointing milling: yes Multipurpose unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 8 pcs

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006849, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA Jointing unit: yes Multifunction unit: yes Maximum feed speed: 25 m/min Maximum panel thickness: 60 mm Njdpfxewd Itmj Af Iekt Working units: 7 pcs

Sąlyga: labai geros būklės (naudotas), Apatinės ašies frezavimo staklės Panhans 240A Veleno skersmuo: 30 mm Veleno ilgis: 130 mm Kintamas veleno greitis: 3000/4500/6000/9000 aps./min Elektroninis veleno aukščio reguliavimas Elektroninis liniuotės reguliavimas Elektroninis kampo reguliavimas Nkodpfx Aexg Iz Hsf Ist SCM keturių volelių padavimo įtaisas

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 2009, veikimo valandos: 29 000 h, Funkcionalumas: nepatikrintas, X ašies padavimo greitis: 25 m/min, bendras ilgis: 7 755 mm, ruošinio aukštis (maks.): 40 mm, darbinio aukščio: 950 mm, valdiklio modelis: PowerControl PC22, TECHNICAL DETAILS Feed speed: 18 - 25 m/min Max. feed speed with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (with workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (with workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12 - 40 mm Edge material (roll): 0.3 - 3 mm Max. edge cross-section (PVC): 135 mm² Max. edge cross-section (veneer): 100 mm² Max. roll diameter: 830 mm Edge material (strips): 0.4 - 20 mm Max. edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT Workpiece support – scissor-type with roller support, extendable up to 1000 mm Automatic adjustment of infeed fence Fixed stop position left Pneumatically controlled infeed lock Njdpfxsyc S Has Af Iokt Upper pressure via driven composite V-belt Electric height adjustment Workpiece transport system via transport chain with rubber support Release agent spraying unit above/below Jointing cutter unit 2 x 3 kW Gluing unit A20 with 2 rollers, consisting of workpiece pre-heating, Quickmelt application system with quick-release mechanism, 2-roller magazine, pressure zone C (automatically adjustable, with 1 pre-press roller and 6 post-press rollers) End trimming unit HL84 0.8 kW, with automatic adjustment for bevel/straight and pneumatic control for flush/overhang trimming Pre-milling unit 1.5 kW, pneumatic adjustment for flush/overhang milling Profile trimming unit FK11 with automatic switching from bevel to radius trimming Profile scraper PN10 (with pneumatic adjustment to move aside) Finishing unit (with pneumatic adjustment to move aside), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK unit Note: Container loading and seaworthy packaging by the seller is not possible.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 20 mm, ruošinio plotis (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is ready for immediate use! TECHNICAL DETAILS Bonded edge thickness: max. 20 mm Maximum gluing height: 60 mm Maximum roller material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: max. 25 m/min Feed: continuous Electrical height adjustment: available Pressure: upper belt pressure Preheating zone: available Granulate glue system: with prefabricated container Glue pot: interchangeable/variable Spray unit: available Pre-milling unit: available Trimming unit: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Nkodpfxjxg Ix Sj Af Ijt Units: synchronized units with NC axis/axes Machine version: left-hand side Quick change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special equipment: with nesting - new chains - HOMAG feed device 2 rollers - HOMAG A 20 gluing unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile pull scraper unit PN 10 - HOMAG FA 11 finishing unit

Sąlyga: naudotas, Gamybos metai: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS PROCESSING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY EASY PROGRAMMING "MATIC" WORKTABLE: SINGLE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHORM400 AXES Working area X-axis (reference side): 3,680 mm Working area Y-axis (max. loadable workpiece at rear stops): 1,680 mm Workpiece passage Z / Number of Z axes: 170 mm / 1 Workpiece length for pendulum operation: 1,650 mm Travel speed X-Y axes Pro-Speed: 85 m/min Z-axis speed: 30 m/min INSTALLATION Installed power: 62–82 KVA Compressed air requirement: 400 NL/min Extraction air requirement: 4,430 m³/h Extraction air velocity: 25 m/s Extraction port diameter: 250 mm GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with worktable and workpiece supports suitable for: - Vertical drilling on panel surfaces - Horizontal drilling on all four workpiece edges - Grooving with disc cutter - General milling operations (3-4-5 axes) MACHINE STRUCTURE Njdpfx Afoxnldbs Ijkt The base structure is a monolithic construction made of thick-walled steel, reinforced throughout the entire machine bed for extreme rigidity and stability through welded-in reinforcements. The table design with a large base is the key to ensuring permanent precision and stability. The machine layout offers the operator an optimal workflow with a minimal footprint. The moving gantry is built from a solid monoblock and is guided on prism-ground rails with ball-bearing carriages in the X-axis. The mobile unit carries the operating unit, which is also mounted on prism-ground rails and ball-bearing guides. AXIS MOVEMENT All axes move on large-cross-section linear prism guides with wide-bearing ball-bearing shoes to ensure optimal gliding even at the highest speeds and accelerations. The precise and fast positioning of the moving gantry (X-axis) is achieved via rack and pinion with helical teeth. Large-diameter ball screws ensure accurate positioning of the working unit along the moving gantry (Y and Z axes). MOTORS, DRIVES, AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are achieved with high-quality drives and brushless motors, sized for speeds up to 90 m/min, ensuring the best possible surface finish. CONTROL SYSTEM The control unit consists of a numerical controller for milling and drilling with "Xilog Maestro" graphic interface on a Windows 7-based Office operating system: - 17" color LCD screen - QWERTY keyboard - Swiveling operator panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features: Programming - Parametric graphical programming - Import of DXF files (2D; geometries like "SPLINE", "POLYLINE 3D", straight or circular interpolation in three axes, linear in space, spiral in the chosen plane) - Supported programming with graphical and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Option to shift panel zero-point for drilling on slanted or curved panel edges

Sąlyga: naudotas, Gamybos metai: 2014, Power Control PC 22 control system with WoodWop – POWERTOUCH software. Panel height: 8 - 60 mm. PVC/ABS thickness: up to 3 mm. Feed speed up to 25 m/min (20 m/min with contour trimming). Electronically adjustable working height via CNC. Motorized, rubberized pressure belt with superior hold. Panel support guide for easier handling and introduction of small panels. Controlled entry guide. Anti-adhesive unit. Pre-milling unit with two motors (each 3 kW, 9000 rpm). Roller-bearing glue application unit for PUR adhesive, including premelter and glue tank. Edge pressing unit for straight profiles with CNC-actuated pressure rollers. Trimming unit with two motors (automatic tilt adjustment). Overlapping end trim unit with two motors. Rounding unit with two multifunction motors (flush trimming and rounding) with CNC control. Scraper unit for edges. Glue scraper unit. Buffing unit. Anti-adhesive unit. TECHNICAL DETAILS NEED TO BE VERIFIED. Nkedpfsvqbh Eex Af Ist

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, For sale is a Felder spindle moulder F-700 Z with 4 spindle speeds. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition, including full warranty / guarantee. Technical data: - 4 spindle speeds - Tilting spindle 90° - 45° - Spindle fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table Nedpfjwp Ri Uex Af Iekt - Motor output 5.5 kW / 7.5 hp SD start - Year of manufacture: 2023 / as new The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Contact phone: 03137-3109 Related terms: spindle moulder, milling machine, moulding Reference: R-D1618