Briaunų apklijavimo mašina

HOMAG KAL 210 AMBITION 2264

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Allgemeine Daten Abmessungen (Tiefe): 7.845 mm Maschinengewicht: 5.000 kg Nsdpfx Asxxndlsbajdd Zusätzliche Ausstattung HOMAG-Verleim- und Finish-Komponenten Diese HOMAG KAL 210 AMBITION 2264 Kantenanleimmaschine wurde 2010 hergestellt. Sie bietet eine maximale Kantenstärke von 20 mm, eine Kantenanleimhöhe bis zu 60 mm und eine maximale Vorschubgeschwindigkeit von 25 m/min. Ausgestattet ist sie mit einem Granulat-Verleimsystem, einer Vorheizzone sowie diversen Bearbeitungseinheiten, darunter Fügefräsen und Eckenrunden. Nutzen Sie die Gelegenheit, diese HOMAG KAL 210 AMBITION 2264 Kantenanleimmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Einsatzbereiche Kantenanleimen

Sąlyga: naudotas, Number of spindles: 6 pcs. Working width: 240 mm Planing height: 200 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- The machine has been cleaned and functionally tested! Technical data: ----- Maximum working width: 240 mm Maximum working height: 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd HSK tool holder ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3rd HSK tool holder ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Nsdpfsvnv Uzex Abasdd Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Additional technical features: ----- 2 feed units after the upper spindles to reduce the axle spacing from 620 mm to 450 mm Air-cushion lubrication on the worktable 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 – 3 Working height of 200 mm instead of 120 mm 5 x electronic horizontal positioning positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) positions (3 – 4 – 5) Mobile 10 control PRL equipment for cutting out the glazing bead on 2nd upper horizontal spindle Machine is supplied without processing tools (Technical data according to manufacturer's information—no guarantee!)

Sąlyga: naudotas, Gamybos metai: 2014, Power Control PC 22 control system with WoodWop – POWERTOUCH software. Panel height: 8 - 60 mm. PVC/ABS thickness: up to 3 mm. Feed speed up to 25 m/min (20 m/min with contour trimming). Electronically adjustable working height via CNC. Motorized, rubberized pressure belt with superior hold. Panel support guide for easier handling and introduction of small panels. Controlled entry guide. Anti-adhesive unit. Pre-milling unit with two motors (each 3 kW, 9000 rpm). Roller-bearing glue application unit for PUR adhesive, including premelter and glue tank. Edge pressing unit for straight profiles with CNC-actuated pressure rollers. Trimming unit with two motors (automatic tilt adjustment). Overlapping end trim unit with two motors. Rounding unit with two multifunction motors (flush trimming and rounding) with CNC control. Scraper unit for edges. Glue scraper unit. Buffing unit. Anti-adhesive unit. TECHNICAL DETAILS NEED TO BE VERIFIED. Ndodpfjvqbh Eox Abaod

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006849, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA Jointing unit: yes Multifunction unit: yes Maximum feed speed: 25 m/min Nedpfx Aewd Itmobaedd Maximum panel thickness: 60 mm Working units: 7 pcs

Sąlyga: naudotas, Gamybos metai: 2013, Technical Data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power requirement: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical Features and Equipment General Functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double top pressure for workpiece stability Electronic thickness control Feed frequency inverter Automatic lubrication of the feed chain Automatic motor calibration Touchscreen control system Emulsion spray unit at infeed and outfeed Edge preheating Pre-milling Unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing Unit Adhesive and hot air application Heated application roller Quick-change complete unit Automatic motorized position adjustment 3 pressure rollers Edgebanding speed: 14 m/min End Trimming Unit Twin-motor unit with automatic tilting Tilting up to 15° THK prism guides Radius Milling Unit 2 tools Automatic adjustment in two axes Automatic overlap setting Copying Unit (2 motors) Automatic tool position change via servomotor Njdpfxev Szt Dj Abaedd Electromagnetic horizontal movement Vertically hydraulically damped movement

Sąlyga: naudotas, Gamybos metai: 2005, Darbo sritis: X=2970 mm / Y=1725 mm. Ašių judėjimo greičiai: X=60, Y=45, Z=25 m/min. Svoris: 3200 kg. Sandėlio vieta: Nattheim. Ndedpfx Abow Dccceasd

Sąlyga: naudotas, Gamybos metai: 2010, Touchscreen control for adjusting work groups Panel height from 10 to 50 mm Solid wood 12 mm PVC/ABS mm from 0.4 to 3 Feed speed up to 22 m/min Minimum panel length 150 mm Minimum panel width 70 mm Electronically adjustable working height via CNC Motorized, rubber-coated upper pressure belt Support guide for panels Side roller track with idler rollers for panel support Ndodopzfcgepfx Abaed Anti-adhesive unit Pre-milling unit with two motors, each 1.5 kW Roller holder plate COMBIMELT gluing system for hot melt adhesive with automatic VarioMelt dosing and pre-melter Patented edge pressure unit with segmented pads Trimming unit with 2 motors Corner rounding unit with 2 motors Corner rounding unit Scraper unit for edges Installed power: 13.7 kW Machine length: approx. 6170 mm TECHNICAL DETAILS TO BE VERIFIED

Sąlyga: naudotas, Gamybos metai: 2007, Working area: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel path X-Y: 2980 x 1271 mm. Z-axis traverse: 200 mm. Clearance height: 180 mm. The main body structure is a monolithic design made of thick-walled steel. It is reinforced throughout the machine bed with welded-in triangular plates, making it extremely stable. The triangular shape with a broad base, used for load-bearing parts, is the key to ensuring sustained precision and stability. The machine layout allows the operator to optimize workflow with a minimal footprint. This main body provides the processing unit with a balanced and secure foundation, featuring outstanding load distribution. The moving aggregate carrier is manufactured as a solid monoblock. It is positioned in the X-direction on ground, prismatic linear guides using recirculating ball carriages. The working unit is also mounted on these ground prismatic guides and ball carriages on the mobile aggregate carrier. Description of aggregates and basic accessories: Drilling unit: Drilling head with 10 + 4 spindles • 6 individually selectable vertical spindles in X • 4 individually selectable vertical spindles in Y • 2 horizontal spindles in X (1+1) • 2 horizontal spindles in Y (1+1) • Speed: 4,000 rpm • Power: 2.2 kW • Pitch: 32 mm • Chuck: M10 with 11 mm seating • Extraction nozzle: D = 160 mm Vertical milling unit (Position 2): • Tool holder HSK 63F • Speed: 1,500 – 24,000 rpm, stepless via inverter • Motor power: 4.4 kW (6 HP) at 12,000 rpm (S1) • CW/CCW rotation • Ceramic bearings • Scope of delivery: 4x tool holders (right) without collet Tool changer: • Side-mounted 7-position tool magazine (TR7), fully enclosed against chip projection • 7 tool slots for HSK 63F tool holders in a row • Max. tool diameter D = 120 mm • Max. weight per tool holder 4.5 kg • Max. total tool weight 20 kg (TR7) • Angular gear units can be accommodated Horizontal milling unit (Position 1): Horizontal unit with two opposed outputs for milling and grooving. • Speed: 9,000 – 18,000 rpm, stepless via inverter • 1 output for collet 3-20 mm (ER32) • 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) • Motor power: 3 kW (4 HP) • Max. front milling tool diameter: 20 mm • Max. front milling tool length: 110 mm • Max. rear milling tool diameter: 12 mm • Max. rear milling tool length: 80 mm • Max. saw blade diameter: 100 mm • Saw blade bore (ER32): 50 mm • Saw blade arbor diameter (ER20): 12 mm Worktable: The worktable is designed to guarantee the operator maximum freedom of movement. The quick-release vacuum clamping system ensures maximum flexibility with precise positioning and optimal holding of workpieces. • 4 supports, 900 mm, steplessly adjustable manually along X • 8 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 per support) • 2 stops in X (1 left / 1 right) • 1 stop in Y per support (total 6) • Retractable reference stops are CNC controlled • Supplied: 4 plug-in adapters for suction cups Nedpfx Aew Aifzobajdd • Pendulum processing as standard (2 working zones) Axis motion: The drive system in X, Y and Z directions uses ground recirculating ball screws of the highest precision class. The ball screw for the X-axis is positioned precisely at the center line...

Sąlyga: naudotas, Gamybos metai: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The structure of the machine base is a monolithic construction made of thick-walled steel. It is reinforced through the entire machine bed with welded triangular plates, providing exceptionally high stability. The triangular shape with a wide base used for supporting parts is the key to ensuring long-lasting precision and stability. The design of the machine allows the user to maintain an optimal workflow, even with minimal space requirements. This machine base offers the processing unit a balanced and secure foundation with excellent load distribution. The mobile unit carrier, designed as a gantry, is constructed as a solid monoblock. It is positioned in the X-direction on prismatically ground rails using recirculating ball carriages. The machining unit is again mounted on the mobile carrier on prismatically ground rails and recirculating ball carriage. Axis movement: The drive system in the Y and Z axes is via ground recirculating ball screws of the highest precision class. The drive in the X axis is via a backlash-free, preloaded precision rack-and-pinion drive. This ensures balanced load distribution during the positioning process. Such a characteristic is crucial to ensure smooth movement, even during more complex operations. The movement of the various axes is achieved by brushless AC servomotors. These provide excellent positioning speeds due to very short ramp-up times. Additionally, the measurement systems are fully integrated into these motors. These features make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (Basic) · Vacuum pump: 100 m³/h · Power: 2.5 kW · Max. vacuum (connection) 0.9 bar Control / Control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRICAL/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC provides the NC control system with an unparalleled level of user familiarity: the software runs on Windows XP, allowing fast and easy programming that can be learned quickly, even by inexperienced users. The system is open and allows the connection of a CD-ROM drive, sound card, barcode reader, modem, printer, scanning systems, etc. Furthermore, installation of all commercially available network systems as well as any CAD programs available on the market is possible. To save space, the control cabinet is placed under the machine table, and the operator works at a separate wheeled terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the chosen plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax help for drilling and milling operations - Parametric programming to perform the same panel machining on different Ndedpfxsvvi Rfo Abajd

Sąlyga: labai geros būklės (naudotas), COMPLETE DOUBLE-SIDED EDGE-AND-PROFILE PROCESSING LINE (including SOFTFORMING), with through-feed drilling machines, splitter, and high-speed automated conveyor technology. Configured as follows: A) Feeding station – stacking system (gantry) "RBO (BIESSE)" Model Winner C (1) B) 1st double-sided edge-banding and profiling machine "BIESSE" Model Stream SB1 11.0 Softforming C) 1st rotation station (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" Model GPK-1 D) 2nd double-sided edge-banding and profiling machine "BIESSE" Model Stream SB2 9.5 E) 2nd rotation station (90° straight or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-2 F) CNC through-feed drilling machine "BIESSE" Techno FDT CN (with 2 horizontal drilling supports, 6 lower vertical drilling supports, and 3 upper vertical drilling supports) G) CNC through-feed drilling machine "BIESSE" Techno FDT CN (with 2 horizontal drilling supports, 6 lower vertical drilling supports, and 3 upper vertical drilling supports) Nsdjttgy Hjpfx Abasdd H) 3rd rotation station (90° straight or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-3 I) Longitudinal panel saw (splitter) "GM (for BIESSE)" Model Split 4-84 LT L) Destacking station – stacking system (gantry) "RBO (BIESSE)" Model Winner SC (2)