Vienpusės kraštų apklijavimo mašinos

HOMAG KAL 210 AMBITION 2264

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 20 mm, ruošinio plotis (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is ready for immediate use! TECHNICAL DETAILS Bonded edge thickness: max. 20 mm Maximum gluing height: 60 mm Maximum roller material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: max. 25 m/min Feed: continuous Electrical height adjustment: available Pressure: upper belt pressure Preheating zone: available Granulate glue system: with prefabricated container Glue pot: interchangeable/variable Spray unit: available Pre-milling unit: available Trimming unit: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left-hand side Quick change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special equipment: with nesting Kodpox Tqgbofx Af Iell - new chains - HOMAG feed device 2 rollers - HOMAG A 20 gluing unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile pull scraper unit PN 10 - HOMAG FA 11 finishing unit

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 4 300 mm, padavimo eiga Y ašimi: 4 300 mm, pjovimo ilgis (maks.): 4 300 mm, pjovimo aukštis su įrėžėju (maks.): 4 300 mm, pjūklo disko skersmuo: 380 mm, HPP 380/43/43, visiškai automatinis pakrovimas su TBP 200/31/22/ Pagrindinis variklis 18,5 kW Mašina veikia puikiai, galima atlikti bandomąjį paleidimą Holzma Profi HPP 380 Pjovimo ilgis: 4 300 mm Pjovimo plotis (programiškai valdomas stūmiko judėjimas): 4 250 mm Oro pagalvių stalas: 2 160 x 650 mm, 3 vnt. + 1* 2 810 mm ilgio Centrinis pūstuvas: 1 vnt. su padidintu pūtimo našumu 2 papildomi paruošimo įtaisai Kodpfexvz T Iex Af Ioll Techniniai duomenys: Pjūklo disko išsikišimas: 95 mm Pjūklo vežimėlio padavimas: pirmyn 1–130 m/min, atgal pastovus 130 m/min Pagrindinio pjūklo variklis: 18 kW Pjūkliuko variklis: 2,2 kW, VVSH agregatas, programiškai valdomas, vertikaliai kylantis Maitinimo įtampa: 400 V (+10%/-5%) / 50 Hz Pagrindinio pjūklo variklio elektrinės galios prijungimas 18 kW: 24 kW Power Control CADmatic 4.0 valdymo sistema su 17 colių plokščiu ekranu Etiketavimas su detalių grafika / etiketavimo programa / etikečių spausdintuvas PICA 104

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007575, Type of applied edge: thin edge, thick edge Glue system: EVA Jointing milling: yes Multipurpose unit: yes Kledpfx Aeybawwjf Iol Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 8 pcs

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Allgemeine Daten Abmessungen (Tiefe): 7.845 mm Maschinengewicht: 5.000 kg Zusätzliche Ausstattung HOMAG-Verleim- und Finish-Komponenten Diese HOMAG KAL 210 AMBITION 2264 Kantenanleimmaschine wurde 2010 hergestellt. Sie bietet eine maximale Kantenstärke von 20 mm, eine Kantenanleimhöhe bis zu 60 mm und eine maximale Vorschubgeschwindigkeit von 25 m/min. Ausgestattet ist sie mit einem Granulat-Verleimsystem, einer Vorheizzone sowie diversen Bearbeitungseinheiten, darunter Fügefräsen und Eckenrunden. Nutzen Sie die Gelegenheit, diese HOMAG KAL 210 AMBITION 2264 Kantenanleimmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Einsatzbereiche Kantenanleimen Klodpfx Afsx D H R Uo Iol

Sąlyga: naudotas, BRANDT highflex 1440 edgebander well-equipped, PRE-MILLING UNITS glue application pneumatic pre-cut guillotine pressure rollers finishing saw units top and bottom trimming unit 2 x corner rounding units profile scraper flat scraper polisher the machine is equipped with NC controlled cutters and a pneumatic package Kedpfx Asv H D S Sof Iell max workpiece height: 60 mm max edge material thickness in rolls: 3 mm max feed speed: 14 m/min machine is operational, possibility to inspect before purchase

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 20 mm, ruošinio plotis (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is ready for immediate use! TECHNICAL DETAILS Bonded edge thickness: max. 20 mm Maximum gluing height: 60 mm Maximum roller material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: max. 25 m/min Feed: continuous Electrical height adjustment: available Pressure: upper belt pressure Preheating zone: available Granulate glue system: with prefabricated container Glue pot: interchangeable/variable Spray unit: available Pre-milling unit: available Trimming unit: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left-hand side Quick change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Kjdpfsxg Ix Sex Af Isll Standards: CE regulations EQUIPMENT - Special equipment: with nesting - new chains - HOMAG feed device 2 rollers - HOMAG A 20 gluing unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile pull scraper unit PN 10 - HOMAG FA 11 finishing unit

Sąlyga: naudotas, Gamybos metai: 2014, Power Control PC 22 control system with WoodWop – POWERTOUCH software. Panel height: 8 - 60 mm. PVC/ABS thickness: up to 3 mm. Feed speed up to 25 m/min (20 m/min with contour trimming). Electronically adjustable working height via CNC. Motorized, rubberized pressure belt with superior hold. Panel support guide for easier handling and introduction of small panels. Controlled entry guide. Anti-adhesive unit. Pre-milling unit with two motors (each 3 kW, 9000 rpm). Roller-bearing glue application unit for PUR adhesive, including premelter and glue tank. Edge pressing unit for straight profiles with CNC-actuated pressure rollers. Trimming unit with two motors (automatic tilt adjustment). Overlapping end trim unit with two motors. Rounding unit with two multifunction motors (flush trimming and rounding) with CNC control. Scraper unit for edges. Glue scraper unit. Buffing unit. Anti-adhesive unit. TECHNICAL DETAILS NEED TO BE VERIFIED. Kodpfx Aevqbh Eof Ioll

Sąlyga: naudotas, Gamybos metai: 2008, Used machine Year of manufacture: 2008 Kedpewx Aaqjfx Af Ioll Condition: well-maintained, regularly serviced (last service by Homag in 11/2024) Equipment and technical data: Minimum workpiece thickness: 12 mm Maximum workpiece thickness: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) Minimum edge thickness: 0.3 mm (coil material) / 0.4 mm (strip material) Maximum edge thickness: 3 mm (coil material) / 20 mm (strip material) Feed speed: infinitely variable, 18–25 m/min (frequency controlled) Adhesive type: EVA hot-melt glue Adhesive application (pot / cartridge / nozzle): Melt unit with granulate container Adhesive volume / cartridge size: Granulate container, melting capacity 18–35 kg/h, level controlled Heat-up time: approx. 8–10 min Edge magazine (positions): 2 rolls (automatic roll change) Automatic edge change: yes (automatic via PC22, manual switching possible) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: Kapp unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel/straight) Flush trimming: via pre-milling unit, pneumatically adjustable Radius milling: FK13 contour milling unit, automatic 8-position tool changer (R = 2 mm) Bevel/profile milling: yes, via FK13, pneumatically adjustable Scraper: integrated in multi-finishing unit MN21 Polishing: buffing unit in finishing unit FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece pre-heating: available Release agent spraying device: above / below, Type 2929 (F.01) Extraction ports: several Ø 100 mm (individual extraction for each unit) Control system: power control PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / standards: CE compliant according to EC Directive 98/37/EC Dimensions / Space requirement: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system shown in the photos is not included in the scope of delivery! Availability: short notice Location: 63934 Röllbach

Gamybos metai: 1997, Sąlyga: geras (naudotas),

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Machining centre Rover 20 Working area: 2,893 x 950 mm, milling spindle with ISO30 tool holder, 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills, as well as a grooving saw, 6-position tool changer. The NC410 control unit is equipped with a floppy disk drive, colour screen, and offers basic, graphically assisted programming capabilities. The Rover 20 also already allows for pendulum (pendulum processing) operations. Kljdpfx Aelc Dwnjf Iol Dimensions: approx. 3,800 x 2,000 mm, height 1,600 mm Control cabinet: 950 x 700 x 1,300 mm Available immediately from site.