Briaunų klijavimo staklės

HOMAG KAL 210 AMBITION 2264

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 2008, veikimo valandos: 33 000 h, Funkcionalumas: nepatikrintas, X ašies padavimo greitis: 25 m/min, ruošinio aukštis (maks.): 60 mm, darbinio aukščio: 950 mm, valdiklio modelis: Power Control PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Working height: 950 mm Minimum working width with workpiece thickness 22 mm: 55 mm Minimum working width with workpiece thickness 60 mm: 100 mm Workpiece overhang: 30 mm Workpiece thickness: 8 (12) - 60 mm Edgebanding material strips max.: 0.4 - 20 mm Edge cross-section strips max.: 900 mm² Edgebanding material rolls: 0.3 - 3 mm Edge cross-section max. with PVC: 135 mm² Edge cross-section max. with veneer: 100 mm² Pgodeyc Sr Ajpfx Af Neg Maximum roll diameter: 830 mm MACHINE DETAILS Control system: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Continuous machine stand for mounting processing units Workpiece support with roller rail, extendable by approx. 800 mm Glue roller drive at feed stop Glue pot lift at feed stop Workpiece-activated glue pot clamping Automatic adjustment of infeed fence Pneumatically controlled infeed lock Infeed device with 2 rollers Infeed extension 500 mm Automatic adjustment of pressure zone Sliding carriage Boomerang ZHR05 return system pre-installation Workpiece support in extended scissor design Operating data acquisition Electric height adjustment Fixed stop on left side Workpiece transport device Upper pressure Separating agent spray unit Joint trimming unit, 2 x 3 kW Gluing unit A20 Basic for rolls up to 3 mm and strips up to 20 mm, with melting unit, granulate container and quick-change system End trimming unit, 2 x 0.8 kW, with pneumatic adjustment Sliding agent spray unit Pre-milling unit 1.5 kW, pneumatically adjustable Contour trimming unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with stepless axis Multi finishing unit MN21 automatic Finishing unit FA11, with finishing device, cleaning agent application and buffing unit, pneumatically adjustable Noise protection Reserve space for additional processing units Note: The machine is sold without tooling. Container loading and seaworthy packaging by the seller is not possible.

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 2014, Funkcionalumas: nepatikrintas, pjovimo ilgis (maks.): 4 200 mm, pjūklo disko skersmuo: 320 mm, pjovimo plotis (maks.): 3 500 mm, bendras svoris: 4 800 kg, Įranga: dozatorius, TECHNINĖ INFORMACIJA Pjovimo sritis: 4.200 x 3.500 mm Pjūklo disko išsikišimas: 80 mm Pjūklo disko skersmuo: 300–320 mm Priešpjovio disko skersmuo: 150 mm Pjovimo vežimo judėjimo greitis į priekį: 5–100 m/min Pjovimo vežimo judėjimo greitis atgal: 130 m/min Medžiagos stumtuvo judėjimo greitis į priekį: 25 m/min Medžiagos stumtuvo judėjimo greitis atgal: 80 m/min ĮRENGINIO DUOMENYS Variklio galia: 9 kW Priešpjovio variklio galia: 1,2 kW Išmatavimai ir svoris Svoris: apie 4.800 kg ĮRANGA Etikečių spausdintuvas Valdymo pultas kairėje pusėje 4 oro pagalvių stalai AV licencijos raktas Ardis optimizavimui Psdoyc Sggopfx Af Nogg Pastaba: Pardavėjas negali organizuoti konteinerių pakrovimo ir jūrinio pakavimo.

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 2009, veikimo valandos: 6 000 h, Funkcionalumas: nepatikrintas, X ašies padavimo greitis: 80 m/min, X ašies eiga: 3 550 mm, Y ašies eiga: 1 680 mm, Z ašies eigos atstumas: 275 mm, veleno greitis (maks.): 24 000 aps./min, TECHNICAL DETAILS Pgodpfx Afsyc Smgj Nog Travel range X-axis: 3,550 mm Travel range Y-axis: 1,680 mm Travel range Z-axis: 275 mm Main spindle max. speed: 24,000 rpm Working area X-axis: 3,060 mm Working area Y-axis: 1,210 mm Working area Z-axis: 100 mm Speed X: 80 m/min Speed Y: 80 m/min Speed Z: 25 m/min MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 5,900 x 4,020 x 2,340 mm Weight: approx. 3,350 kg Extraction nozzle diameter: 200 mm Operating hours: approx. 6,000 h EQUIPMENT Linear tool changer with 8 positions, traveling Side pick-up station for 2 tools Traveling pick-up station for HSK F63 unit/tool 14 vertical drilling spindles (9 in X and 5 in Y direction) 6 horizontal drilling spindles (4 in X and 2 in Y direction) 1 slot saw (4-10 mm) mounted in the X-axis 1 main spindle HSK F-63, 9 kW Preparation for 0-360° C-axis 6 consoles for holding vacuum clamps Traveling laser for vacuum cup positioning 2 processing fields for pendulum operation Hand terminal Automatic central lubrication system Note: Container loading and seaworthy packaging by the seller is not possible.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 20 mm, ruošinio plotis (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is ready for immediate use! TECHNICAL DETAILS Bonded edge thickness: max. 20 mm Maximum gluing height: 60 mm Maximum roller material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: max. 25 m/min Feed: continuous Electrical height adjustment: available Pressure: upper belt pressure Preheating zone: available Granulate glue system: with prefabricated container Glue pot: interchangeable/variable Spray unit: available Pre-milling unit: available Trimming unit: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Pjdpjx Tqgbjfx Af Negg Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left-hand side Quick change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special equipment: with nesting - new chains - HOMAG feed device 2 rollers - HOMAG A 20 gluing unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile pull scraper unit PN 10 - HOMAG FA 11 finishing unit

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007575, Type of applied edge: thin edge, thick edge Glue system: EVA Jointing milling: yes Podpfxjybawws Af Njgg Multipurpose unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 8 pcs

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006849, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA Jointing unit: yes Multifunction unit: yes Maximum feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 7 pcs Pedpfowd Itmox Af Negg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Allgemeine Daten Abmessungen (Tiefe): 7.845 mm Maschinengewicht: 5.000 kg Zusätzliche Ausstattung HOMAG-Verleim- und Finish-Komponenten Diese HOMAG KAL 210 AMBITION 2264 Kantenanleimmaschine wurde 2010 hergestellt. Sie bietet eine maximale Kantenstärke von 20 mm, eine Kantenanleimhöhe bis zu 60 mm und eine maximale Vorschubgeschwindigkeit von 25 m/min. Ausgestattet ist sie mit einem Granulat-Verleimsystem, einer Vorheizzone sowie diversen Bearbeitungseinheiten, darunter Fügefräsen und Eckenrunden. Nutzen Sie die Gelegenheit, diese HOMAG KAL 210 AMBITION 2264 Kantenanleimmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Psdpfx Afex D H R Ue Negg Einsatzbereiche Kantenanleimen

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 20 mm, ruošinio plotis (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is ready for immediate use! TECHNICAL DETAILS Bonded edge thickness: max. 20 mm Maximum gluing height: 60 mm Maximum roller material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: max. 25 m/min Feed: continuous Electrical height adjustment: available Pressure: upper belt pressure Preheating zone: available Granulate glue system: with prefabricated container Glue pot: interchangeable/variable Spray unit: available Pre-milling unit: available Trimming unit: with 2 motors Milling stations: flush/radial/chamfer, 1 available Psdpfxexg Ix Se Af Njgg Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left-hand side Quick change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special equipment: with nesting - new chains - HOMAG feed device 2 rollers - HOMAG A 20 gluing unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile pull scraper unit PN 10 - HOMAG FA 11 finishing unit

Sąlyga: naudotas, Gamybos metai: 2014, Power Control PC 22 control system with WoodWop – POWERTOUCH software. Panel height: 8 - 60 mm. PVC/ABS thickness: up to 3 mm. Feed speed up to 25 m/min (20 m/min with contour trimming). Electronically adjustable working height via CNC. Motorized, rubberized pressure belt with superior hold. Panel support guide for easier handling and introduction of small panels. Controlled entry guide. Anti-adhesive unit. Pre-milling unit with two motors (each 3 kW, 9000 rpm). Roller-bearing glue application unit for PUR adhesive, including premelter and glue tank. Edge pressing unit for straight profiles with CNC-actuated pressure rollers. Trimming unit with two motors (automatic tilt adjustment). Overlapping end trim unit with two motors. Rounding unit with two multifunction motors (flush trimming and rounding) with CNC control. Scraper unit for edges. Glue scraper unit. Buffing unit. Anti-adhesive unit. TECHNICAL DETAILS NEED TO BE VERIFIED. Pgjdpfevqbh Eex Af Nsg