Platus juostinis šlifuoklis

Heesemann LSM 8

Gamybos metai: 2004, būklė: paruoštas naudoti (naudotas), A 5-roller wood sanding machine by Heesemann is available. Sanding belt dimensions: 2620 x 1350 mm, sanding width: 1300 mm, working height: 1000 mm, roller diameter: 250 mm, belt speed: 24 m/s, extraction volume: 89.5 m³/min, extraction connection diameter: 250 mm + 180 mm, air velocity: 20 m/s. Dimensions (L/W/H): approx. 5200 mm / 2300 mm / 2300 mm, weight: approx. 13,000 kg. Documentation available. Inspection on site is possible. Csdpot Amc Uofx An Horc

Būklė: naudotas, mašinos/transporto priemonės numeris: 008027, Maks. apdirbamas plotis: 1350 mm Min. apdirbamas storis: 200 mm Darbo stalas: fiksuoto aukščio Vakuuminis transporteris: taip Darbo agregatų skaičius: 4 vnt. Csdpfxswvq E Aj An Hjrc

Būklė: naudotas, Gamybos metai: 2006, Apatinis kalibratorius su 2 apatiniais diržais, RR 1300, 2 apatiniai volai; Viršutinis kalibratorius su 2 viršutiniais diržais, RR 1300, 2 viršutiniai volai Crsdoycxwfspfx An Hsc

Būklė: naudotas, Gamybos metai: 2004, • Cutting width (mm): 1300 • Maximum workpiece thickness (mm): 3 - 140 • Deburring device: brush roller diameter 150 mm Crodpfx Anjtt Slcj Hec • Drive for deburring device (kW): 1.5 • Conveyor table: 3.0 kW frequency-controlled / 4.0 kW • Feed speed (m/min): 5 - 25 • Workpiece transport belt vacuum clamping system (kW): 7.5 • Total weight (kg): approx. 7500 • Total connected load (kW): approx. 73

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), WEINIG window production line comprises: Unirex 3000 machining center Crodpfx Aneh H Iyxo Hec Univar 15 Unitex 15

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, bendras ilgis: 4 400 mm, darbinis plotis: 1 400 mm, aukščio reguliavimo tipas: elektrinis, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, Hello, we offer for sale a Heesemann LSM 8 wide belt sander in a configuration with four sanding units: cross-belt unit / longitudinal unit with calibration drum / longitudinal unit with reverse / longitudinal unit with de-dusting brush The machine has undergone mechanical refurbishment and inspection, checked and set up, ready for operation. Year of manufacture: 1997 Feed speed: 5-25 m/min – infinitely adjustable from the control panel Working height: 880 mm Workpiece thickness: 3-80 mm Power requirement: 107 kW – at full load Total weight: 10,250 kg Control: control panel with physical buttons and display Control and abrasive belt change side: right Single, perforated feed belts, perforated table with channel and vacuum fan – for safe transport of short workpieces. Element hold-down: rubber-coated rollers, diameter 70 mm. Abrasive belt Q unit: 5,400 mm x 150 mm Motor power: 13/17 kW – two-speed motor – belt speed 12 m/s / 24 m/s "Sergeant" belt: 4,850 mm x 141 mm Longitudinal belt L unit: 2,620 mm x 1,450 mm Motor power: 16.5 kW / 21 kW – two-speed motors – 10 m/s / 20 m/s Pressure: Hold-down beams with computer-controlled selective pressure adjustment – CSD® system for seamless, multi-row feeding with smooth adjustment of individual pressure elements. Controller roller reading distance: 16 mm. Abrasive belts feature a cleaning system – air blast and dust extraction. Workpiece thickness tolerance compensation up to 2 mm via maintenance-free electromagnetic hold-downs. Working width as well as the start and end position of the sanding pressure beam are electronically controlled. Abrasive belt cleaning via blowing tubes; dust extraction via integrated extraction channels; air blast activation is automatic upon workpiece detection in the machine. At the end: cleaning/de-dusting brush, 150 mm diameter, with extraction channel for dust removal. Additional blow rotors at the machine outfeed with an extraction channel. Commissioning at your location and basic operational training – to be arranged. Price negotiable on request, machine available immediately. Crjdpfx Aju Hlzfon Hec

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 350 mm, bendras svoris: 10 000 kg, įėjimo srovė: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding Width: 1350 mm CROSS/LONGITUDINAL/LONGITUDINAL Machine Base: Conveyor unit with a single transport belt; feed speed adjustable between 3 - 15 m/min via frequency control, including transport belt cleaning device. Constant working height of 920 mm; adjustment to various workpiece thicknesses (3 - 80 mm) by motor-driven adjustment of the upper machine section. Toothed belt cover for the lifting gear provides dust protection. Lifting gear toothed belt is monitored and controlled, integrated into the switch cabinet. 1. Cross Sanding Unit - Belt dimensions: 5,400 x 150 mm - Drive power: 13/17 kW - Sanding belt equipped with additional blasting tube for the belt cleaning device, wear-resistant brake unit, pressure segment belt system, intermittent belt cleaning blast device, belt running control. Includes door with glass insert. 2. Longitudinal Sanding Unit - Belt dimensions: 2,620 x 1,350 mm - Drive power: 13/17 kW - Belt, in combination with double the number of blasting holes in the belt cleaning device, wear-resistant brake unit. Automatic compensation for differences in belt length, sanding belt runs against feed direction, intermittent dust blasting device, infra-red belt monitoring. Eccentric bearing for the front (steel) roller for light calibration; controlled via operator terminal. 3. Longitudinal Sanding Unit - Belt dimensions: 2,620 x 1,350 mm - Belt speeds: 0.5 - 18 m/s - Drive power: 17 kW (frequency controlled) - Infinitely variable sanding belt speed, with twice the number of blasting holes in the belt cleaning device, wear-resistant brake unit, automatic compensation for belt length differences, sanding belt runs against feed direction, intermittent belt cleaning blast, infra-red belt monitoring. 4. Brush Roll Unit - Centrally height-adjustable; includes extraction hood and press-on roll. - Diameter: 150 mm - Drive power: 1.5 kW - Bristle type: fibre 5. Workpiece Suction Device - For secure transport of workpieces shorter than 500 mm in the feed direction, including integrated ventilator Voltage: 400 V, 50 Hz Belt Change: Left Control Terminal: Left 6. Ionization Bar (Top) - For removal of static charge, incl. high-voltage transformer 7. Workpiece Blasting Device with Rotating Compressed Air Nozzles (within the machine frame) The machine is ready for operation at your facility following a complete mechanical and electrical overhaul by authorized Heesemann service personnel. A new conveyor belt is fitted. Start-up and operator training at the customer’s location can be arranged. Transport costs are negotiable – loading is included in the price. If you have any questions, I am available. Crsdpfx Ansxp Hvns Hjc Paweł Szczepański +48 795 517 258

Būklė: naudotas, Slotted Spindle 1 pc Number of Milling Units: 4 pcs Spindle Diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC-controlled radially and axially --- The machine was factory-refurbished by Weinig in 2024. During this process, the control system was upgraded to Siemens S7 677 C with a new “touch” membrane panel. Equipped with the following processing units: Crosscut Saw --- with laser guide light, motor power 3 kW, spindle diameter 40 mm, Crodpfx Anoxpi Due Hec spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatically across 8 positions for edge rounding from above Edge Rounding Unit from Below --- Axial adjustment paired with crosscut saw Tenoning and Mortising Spindle --- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm minimum tool cutting circle 380 mm, maximum 400 mm tool clamping length 640 mm axial adjustment CNC axis axial adjustment stroke 580 mm adjustment speed 100 mm/sec 1st Profile Spindle (Conventional and Climb Milling) --- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd Profile Spindle --- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal Profiling Unit, Upper --- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment over 8 positions axially and radially Vertical Profiling Unit, Right at Machine End --- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment over 8 positions axially and radially Additional Equipment --- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, incl. positioned crosscut saw integrated into the control Window mullion cutting unit, swivels 60° both sides double-part handling package with automatic singling and transfer feed-in device with window automation for rebating rebate carriage for rebating narrow sash widths climate control unit in the switch cabinet PC control NEXUS automatic turning system lamella conveyor, including return conveyor for transporting workpieces back to the operator (Technical data according to manufacturer – subject to confirmation).

Gamybos metai: 2001, būklė: geras (naudotas), I am selling a wide belt sander Costa SA2 TS 1350, year of manufacture 2001. Configuration: electronic segmented pad and brush head. Working width: 1350 mm. Abrasive belt: 1380x2620 mm. Pressure rollers for short elements. Compressed air cleaning system for both units. Total weight: 2600 kg. Main motor: 11 kW. Final cleaning unit with extraction. Documentation included. Condition: good. Available immediately. Cedpjg Trufjfx An Herc

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 300 mm, Equipped with: 1 transverse belt with CNC-controlled CSD magnetic pads Cjdpfx Ajwy Npuen Hjrc 1 longitudinal belt with 1 retractable descent roller + CNC-controlled CSD pad 1 cleaning brush