Platus juostinis šlifuoklis

HEESEMANN LSM 8

Sąlyga: naudotas, Gamybos metai: 2006, Apatinis kalibratorius su 2 apatiniais diržais, RR 1300, 2 apatiniai volai; Viršutinis kalibratorius su 2 viršutiniais diržais, RR 1300, 2 viršutiniai volai Podpfx Ahsycxwfo Hopl

Sąlyga: naujas, Gamybos metai: 2026, Drum Chipper Series ATH 300 S&F chipping machines and drum chippers with horizontal feed are used in various sectors of the wood processing industry (sawmills, wood mills). Chippers of the "ATH" series produce high-quality and homogeneous wood chips from residual wood with a low proportion of fines, for example as quality wood chips for the pulp industry or as fuel chips for energy production. Series ATH 300 - Infeed height: 300 mm - Infeed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pcs - Number of counter knives: 2 pcs - Rotor diameter: 700 mm - Number of infeed rollers: 3 pcs - Throughput capacity: up to approx. 70 stacked cubic meters/h * - Chip length: 5 - 80 mm - Chipper drive power: 37 - 250 kW Ppedpfjuz Hmxox Ah Hjl - Infeed roller drive power: 2 x 3.0 kW - Operating / control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chip length, main motor kW, number of knives, and material feed Advantages: - Maximum throughput - Minimal fines content - Low maintenance - Versatile application - Custom manufacturing Need further information? Contact us! We’ll be happy to advise you. Drum Chipper | Wood Chipper | Chipper | Chipping Machine | Wood Chipping Machine | Shredder | Wood Crusher

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2002, Bendrieji duomenys Išmatavimai (plotis): 2300 mm Išmatavimai (gylis): 3850 mm Išmatavimai (aukštis): 2500 mm Staklių svoris: 9200 kg Pedpfx Aox D Dr Nsh Hspl Ši HEESEMANN LSM 8 juostinė šlifavimo staklės pagaminta 2002 m. Ji pasižymi 1300 mm šlifavimo pločiu ir leidžia apdirbti ruošinius, kurių storis nuo 3 iki 80 mm. Staklės turi vakuuminį transporto konvejerį ir kintamą padavimo greitį nuo 5 iki 25 m/min, užtikrinantį efektyvų medžiagos judėjimą ir lankstumą šlifavimo darbams. Pasinaudokite proga įsigyti šią HEESEMANN LSM 8 juostinę šlifavimo staklę. Dėl detalesnės informacijos apie įrenginį kreipkitės į mus. Pritaikymo sritys Šlifavimas

Sąlyga: naudotas, Gamybos metai: 2012, veikimo valandos: 60 000 h, Funkcionalumas: visiškai funkcionalus, X ašies padavimo greitis: 12 m/min, ruošinio svoris (maks.): 50 kg, darbinis plotis: 1 350 mm, bendras ilgis: 62 000 mm, bendras aukštis: 2 800 mm, bendras plotis: 3 200 mm, įvesties srovės tipas: Oro kondicionierius, darbinio aukščio: 120 mm, įėjimo įtampa: 400 V, siurbimo galia: 36 000 m³/val, įėjimo srovė: 800 A, įėjimo dažnis: 50 Hz, galia: 440 kW (598,23 AG), suslėgto oro jungtis: 6 juosta, Pilna dažymo linija. Dėl išsamesnės informacijos kreipkitės per portalą. Ppedov T Ttxopfx Ah Hsl

Sąlyga: naujas, Machining centre with 4 CNC-controlled axes suitable for processing aluminium, PVC, and steel profiles Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame: rigid welded construction, stress-relieved, with hardened linear guideways Psdpfx Ahjwrcwps Hjpl Protective enclosure along the entire machining length Pneumatically operated safety door Milling spindle: - 3.8/4.6 kW S1/S6 - 3.0/3.7 Nm S1/S6 - Max. 18,000 rpm, air-cooled - Tool holder ISO 30 - Minimum quantity lubrication for tools with fill-level monitoring Tool magazine: - 5 positions, located on the left side in the machine bed, for drill, milling, and thread-cutting tools, angle head, disc cutter up to Ø 150 mm Workpiece clamping: - 4 pneumatic profile clamps, clamping range up to 250 mm - Automatic positioning via Z-axis device Workpiece positioning: - One pneumatic reference stop each on the left and right on the A-axis Travel ranges: X-axis: 3500 mm Y-axis: 370 mm Z-axis: 348 mm A-axis: ±90° Rapid traverse speeds: X-axis: 70 m/min Y-axis: 30 m/min Z-axis: 30 m/min A-axis: 60°/sec Max. working areas: X-axis: 3270 mm Y-axis: 250 mm at 0°, 116 mm at ±90° on the A-axis Z-axis: 170 mm at 0°, 200 mm at ±90° on the A-axis Operating software: - CAD/CAM in 3D technology (option, included!) - Programming system according to ISO standard Functionality: - Linear and circular interpolation on two axes (X-Y) - Three-side machining possible by swivelling the A-axis (90°-0°-90°) - End-face machining using disc cutter Operating modes: - One profile bar along the entire machining length - Two profile bars with divided machining length Lubrication system: - Automatically controlled central lubrication for all axes, ball screws, and guides, with fill-level monitoring Operation: - 18.5” touchscreen - Mouse and keyboard Connection data: - Electrical: 400V/50Hz (3-Ph+N+PE), 16 A - Delivered without power cable - Pneumatic: Pressure 6–8 bar Dimensions and weight: - Length: 5800 mm - Width: 1640 mm - Height: 2000 mm - Weight: 2000 kg Includes: - Graphical programming software CM3D/CAD3D - Barcode reader - Additional network interface including remote maintenance/diagnostics for 1 year

Sąlyga: naudotas, Gamybos metai: 2006, veikimo valandos: 100 000 h, Funkcionalumas: visiškai funkcionalus, X ašies padavimo greitis: 30 m/min, ruošinio svoris (maks.): 50 kg, darbinis plotis: 1 400 mm, siurbimo galia: 48 000 m³/val, įvesties srovės tipas: trifazis, bendras aukštis: 2 800 mm, bendras ilgis: 68 000 mm, bendras plotis: 2 600 mm, darbinio aukščio: 75 mm, galia: 720 kW (978,93 AG), įėjimo dažnis: 50 Hz, įėjimo srovė: 1 800 A, darbinis slėgis: 6 juosta, ruošinio plotis (maks.): 1 250 mm, suslėgto oro jungtis: 6 juosta, Pilna dažymo linija. Daugiau informacijos suteiksime susisiekus per portalą. Ppjdpfov Ta Tfsx Ah Hol

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006530, Maks. apdorojimo plotis: 1300 mm Min. apdorojimo storis: 3 mm Ppodpfx Aewcybmoh Hsl Darbo stalas: fiksuotas aukštis Vakuuminis transporteris: taip Darbo agregatų skaičius: 8 vnt.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008030, Priklijuotos briaunos tipas: plona briauna, stora briauna, masyvo mediena Klijavimo sistema: EVA, PUR, karštas oras Sujungimo frezavimas: taip Daugiafunkcinis agregatas: taip Maks. padavimo greitis: 25 m/min Maksimali plokštės storis: 60 mm Pjdpfx Ahewvq Hge Hepl Darbo agregatai: 8 vnt.

Sąlyga: naudotas, Gamybos metai: 2004, • Cutting width (mm): 1300 • Maximum workpiece thickness (mm): 3 - 140 • Deburring device: brush roller diameter 150 mm • Drive for deburring device (kW): 1.5 • Conveyor table: 3.0 kW frequency-controlled / 4.0 kW • Feed speed (m/min): 5 - 25 Ppjdpfxjtt Slcj Ah Hel • Workpiece transport belt vacuum clamping system (kW): 7.5 • Total weight (kg): approx. 7500 • Total connected load (kW): approx. 73

Sąlyga: geras (naudotas), darbinis plotis: 1 350 mm, HESEEMANN LSM8 Ppsdpfx Ahoxcg Scj Hel

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, The JJZ-CP type press is designed for the production of plywood, doors, and MDF boards. Loading and unloading of laminated components from the press is performed automatically via powered rollers. The press can be integrated with glue applicators. Technical data: - Maximum pressure: 500T (adjustable) - Maximum feed height: 1300 mm - Maximum feed dimensions: 1300 x 2500 mm - Press dimensions: 3600 x 1370 x 4500 mm - Press installed approximately 500 mm below floor level Podpfxstutwvj Ah Hopl - Infeed table: 2000 x 1960 mm - Outfeed table: 2350 x 2500 mm - Maximum power: 13.2 kW - CE mark

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 350 mm, bendras svoris: 10 000 kg, įėjimo srovė: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding Width: 1350 mm CROSS/LONGITUDINAL/LONGITUDINAL Machine Base: Conveyor unit with a single transport belt; feed speed adjustable between 3 - 15 m/min via frequency control, including transport belt cleaning device. Constant working height of 920 mm; adjustment to various workpiece thicknesses (3 - 80 mm) by motor-driven adjustment of the upper machine section. Toothed belt cover for the lifting gear provides dust protection. Lifting gear toothed belt is monitored and controlled, integrated into the switch cabinet. 1. Cross Sanding Unit - Belt dimensions: 5,400 x 150 mm - Drive power: 13/17 kW - Sanding belt equipped with additional blasting tube for the belt cleaning device, wear-resistant brake unit, pressure segment belt system, intermittent belt cleaning blast device, belt running control. Includes door with glass insert. 2. Longitudinal Sanding Unit - Belt dimensions: 2,620 x 1,350 mm - Drive power: 13/17 kW - Belt, in combination with double the number of blasting holes in the belt cleaning device, wear-resistant brake unit. Automatic compensation for differences in belt length, sanding belt runs against feed direction, intermittent dust blasting device, infra-red belt monitoring. Eccentric bearing for the front (steel) roller for light calibration; controlled via operator terminal. 3. Longitudinal Sanding Unit - Belt dimensions: 2,620 x 1,350 mm - Belt speeds: 0.5 - 18 m/s - Drive power: 17 kW (frequency controlled) - Infinitely variable sanding belt speed, with twice the number of blasting holes in the belt cleaning device, wear-resistant brake unit, automatic compensation for belt length differences, sanding belt runs against feed direction, intermittent belt cleaning blast, infra-red belt monitoring. 4. Brush Roll Unit - Centrally height-adjustable; includes extraction hood and press-on roll. - Diameter: 150 mm - Drive power: 1.5 kW - Bristle type: fibre 5. Workpiece Suction Device - For secure transport of workpieces shorter than 500 mm in the feed direction, including integrated ventilator Voltage: 400 V, 50 Hz Belt Change: Left Control Terminal: Left 6. Ionization Bar (Top) Psdexp Hvnjpfx Ah Hepl - For removal of static charge, incl. high-voltage transformer 7. Workpiece Blasting Device with Rotating Compressed Air Nozzles (within the machine frame) The machine is ready for operation at your facility following a complete mechanical and electrical overhaul by authorized Heesemann service personnel. A new conveyor belt is fitted. Start-up and operator training at the customer’s location can be arranged. Transport costs are negotiable – loading is included in the price. If you have any questions, I am available. Paweł Szczepański +48 795 517 258

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, bendras ilgis: 4 400 mm, darbinis plotis: 1 400 mm, aukščio reguliavimo tipas: elektrinis, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, Hello, we offer for sale a Heesemann LSM 8 wide belt sander in a configuration with four sanding units: cross-belt unit / longitudinal unit with calibration drum / longitudinal unit with reverse / longitudinal unit with de-dusting brush The machine has undergone mechanical refurbishment and inspection, checked and set up, ready for operation. Year of manufacture: 1997 Feed speed: 5-25 m/min – infinitely adjustable from the control panel Working height: 880 mm Workpiece thickness: 3-80 mm Power requirement: 107 kW – at full load Total weight: 10,250 kg Control: control panel with physical buttons and display Control and abrasive belt change side: right Pjdpeu Hlzfefx Ah Hjpl Single, perforated feed belts, perforated table with channel and vacuum fan – for safe transport of short workpieces. Element hold-down: rubber-coated rollers, diameter 70 mm. Abrasive belt Q unit: 5,400 mm x 150 mm Motor power: 13/17 kW – two-speed motor – belt speed 12 m/s / 24 m/s "Sergeant" belt: 4,850 mm x 141 mm Longitudinal belt L unit: 2,620 mm x 1,450 mm Motor power: 16.5 kW / 21 kW – two-speed motors – 10 m/s / 20 m/s Pressure: Hold-down beams with computer-controlled selective pressure adjustment – CSD® system for seamless, multi-row feeding with smooth adjustment of individual pressure elements. Controller roller reading distance: 16 mm. Abrasive belts feature a cleaning system – air blast and dust extraction. Workpiece thickness tolerance compensation up to 2 mm via maintenance-free electromagnetic hold-downs. Working width as well as the start and end position of the sanding pressure beam are electronically controlled. Abrasive belt cleaning via blowing tubes; dust extraction via integrated extraction channels; air blast activation is automatic upon workpiece detection in the machine. At the end: cleaning/de-dusting brush, 150 mm diameter, with extraction channel for dust removal. Additional blow rotors at the machine outfeed with an extraction channel. Commissioning at your location and basic operational training – to be arranged. Price negotiable on request, machine available immediately.

Sąlyga: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Teknamotor Skorpion 500 EB/2 Wood Chipper/Shredder – Manufactured in Poland – Year of manufacture: 2008 – DTR (Technical Documentation), CE certified – Capacity up to 14 m³/h TECHNICAL SPECIFICATIONS: - Infeed width: 500 mm - Infeed height: 130 mm - Rotor diameter: 400 mm - Rotor width: 515 mm - Main motor: 45 kW - Number of knives: 2 pcs - Knife length: 515 mm - Bottom toothed feed roller - Bottom roller motor: 1.5 kW - Top toothed feed roller - Top roller motor: 1.5 kW - Infeed conveyor length: 3000 mm Podpotp Tayefx Ah Hspl - Discharge conveyor length: 3800 mm - Conveyor belt width: 500 mm - Conveyor feed direction: forward/reverse - Transport dimensions (L/W/H): 500 / 240 / 220 cm - Weight: approx. 2500 kg

Gamybos metai: 2004, Sąlyga: paruoštas naudoti (naudotas), A 5-roller wood sanding machine by Heesemann is available. Sanding belt dimensions: 2620 x 1350 mm, sanding width: 1300 mm, working height: 1000 mm, roller diameter: 250 mm, belt speed: 24 m/s, extraction volume: 89.5 m³/min, extraction connection diameter: 250 mm + 180 mm, air velocity: 20 m/s. Dimensions (L/W/H): approx. 5200 mm / 2300 mm / 2300 mm, weight: approx. 13,000 kg. Documentation available. Inspection on site is possible. Ppedot Amc Uopfx Ah Hel