Kūno presas

HÖFER Koptronik

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 867, įėjimo srovė: 16 A, įėjimo dažnis: 50 Hz, reikalingas plotis: 800 mm, vietos reikalavimas ilgis: 3 950 mm, reikalingas aukštis: 2 400 mm, aukščio reguliavimo tipas: elektrinis, stalo plotis: 670 mm, bendras svoris: 2 300 kg, ruošinio aukštis (maks.): 1 400 mm, ruošinio ilgis (maks.): 2 500 mm, ruošinio plotis (maks.): 650 mm, - Spaudos ilgis: 150-2500 mm - Spaudos aukštis: 150-1400 mm - Spaudos gylis: 650 mm - Spaudimo laikas programuojamas Hsdpjydqulsfx Ab Ash - Spaudimo jėga reguliuojama - Slėgio sukūrimas per dažnio valdoma pavaros variklius

Sąlyga: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Hsdpoiidm Nsfx Ab Aoh Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED SQUARING AND EDGE BANDING MACHINE – 1st machine in line Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 45 mm Working width (min/max): 236 / 1300 mm Control/Software: ICOS Open Feed speed (adjustable): 10 / 50 m/min No transmission bar (Master & Slave systems) Safety and noise protection cabin SQUARING SECTION (per side): Spray unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free position Hsdjdh Tfgjpfx Ab Aeh EDGE BANDING SECTION (per side): Gluing unit (Hot Melt + premelter) 04.1570 Pressure zone for edging Edgeband magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flush trimming unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free position

Sąlyga: naudotas, Weinig Unimat 23 Technical data Working width: 30 - 230 mm Working height: 19 - 200 mm mounted on platform bottom – right – left – top – top/bottom without infeed machine only The machine has been dismantled and is available immediately. Transport can be arranged. Hsdpfx Aoncc Igsb Ash

Sąlyga: geras (naudotas), Gamybos metai: 1991, Longitudinal saw with 6.2 m cutting length maximum cutting height 170 mm maximum cutting width 600 mm with laser electric width adjustment Hsdpsut Rbvofx Ab Aeh immediately ready for operation

Gamybos metai: 1995, Sąlyga: geras (naudotas), Kuper Veneer Zig-Zag Splicing Machine, Model FW/1200-E Year of manufacture: 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: - High feed speed of 60 m/min - Electronically infinitely adjustable zig-zag width of the glue thread cutting unit Maximum veneer thickness: 3.0 mm Minimum veneer thickness: 0.3 mm Glue thread with hot air heating Compressed air generation Disc for transporting veneer over the veneer table Foot pedal control Feed speed: 35–60 m/min Hodpfx Aehbp Ifob Aoh Voltage: 400 V, 50 Hz Total power: 1.35 kW Working height: 915 mm Weight approx.: 440 kg Dimensions: 2.12 m x 0.73 m x 1.55 m

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006290, Max. working width: 1300 mm Hjdpfju A Evhsx Ab Aoh Max. working height: 100 mm Number of rollers: 2

Sąlyga: naujas, Vacomats are mobile dust extractors capable of collecting large volumes of dust and chips in very confined spaces. These clean air extraction units (negative pressure systems) are designed for indoor installation and can be used either for single-machine or multi-machine dust extraction, handling air volumes of up to 10,000 m³/h. Manufactured according to the latest EU standard EN 16770, they are particularly suitable for woodworking operations that must comply with heightened safety requirements due to the risk of dust explosions. Suitable for substances in dust explosion class St1. The filter cleaning mechanism of the Vacomat XPe operates fully electro-mechanically via an efficient shaking motor, which automatically activates when all connected machines have shut down. The control is managed through a signal from the woodworking machine using volt-free contacts. Motorized filter shaking is included in the scope of supply. Supplied without coils. Features: - Motorized filter regeneration - Mobile design - Extraction connections can be positioned right or left (can be reconfigured) - Height reduction for transport possible ----- Technical Specifications ----- Hedpfxeu T Dv Ee Ab Ajh Extraction nozzle Ø: 200 mm Airflow rate: 2,495 m³/h Nominal airflow: 2,262 m³/h Max. negative pressure: 2,000 Pa Filter surface area: 14.5 m² Residual dust content: < 0.1 mg/m² Number of collection bags: 3 pcs Motor power: 4.0 kW Dimensions (LxWxH): 2,645 x 900 x 2,130 mm Weight: 500 kg Sound pressure level: 73 dB(A) Dust class: M Includes: attached control cabinet

Gamybos metai: 2016, Sąlyga: labai geros būklės (naudotas), Böhl - Wrapping Machine Type JUNIOR/S-450 VA Product Dimensions: Length: 600/800 mm maximum 5800 mm Width: 15 mm maximum 220 mm Height: 15 mm maximum 120 mm Weight maximum 30 kg/meter The maximum cross-sectional diagonal of the previous customer was 220 mm. The specified weights are only possible with a powered, customer-provided roller conveyor. Technical Data: Electrical Control: Siemens S7 with TP Control Voltage: 24 V DC Hedpfslcc U Eex Ab Aeh Operating Voltage: 3 x 400 V/50 Hz, N, PE Pneumatics: FESTO Compressed Air: 6 bar, dried, filtered, and oil-free Air Consumption: approximately 20 NL/cycle Maximum Infeed Pressure: 8 bar Noise Emission Level: less than 80 db/A Machine see layout drawing Operating Side: right in conveying direction Control Cabinet: left, fixed to the machine Paint Machine 7032, grey Black-yellow Roller Conveyor Height: 900mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 241.125, Horizontalioji juostinė pjovimo staklės, gamintojas Schelling, skirtos medienos pagrindo medžiagoms pjauti HPO – pjovimo optimizavimo programa Pjūklo disko išsikišimas: maks. 95 mm Pjūklo vežimėlio judėjimo greitis iki 120 m/min Pjovimo ilgiai: Modelis FH 4 430 – 4.300 mm Galima apžiūrėti veikiančią iki 2026 metų pradžios (numatomas išmontavimas) Didžiausias pjūklo disko skersmuo – 350 mm Išsikišimas – 95 mm Spaustuvo atidarymas 90 mm Pagrindinio pjūklo variklio galia – 15 kW Pjūklo brėžiantysis disko skersmuo – 300 mm Padavimo greitis pirmyn iki 80 m/min Hjdpfx Abex Ebzde Ash atgal 80 m/min Pjūklo padavimo greitis pirmyn iki 120 m/min atgal 120 m/min