Platus juostinis šlifuoklis

SCM SANDYA UNO

Būklė: labai geros būklės (naudotas), Wide Belt Sander for Calibration and Fine Finishing Manufacturer: SCM Model: RCS 1st Unit: Calibrating Roller, Steel 2nd Unit: Combination Unit (Roller 60 Sh, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Nlsdpfx Ajxqggcjcpea Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 emergency stops Table extension with 2 rollers, front and rear Sanding pad inserts covered with new graphite cloth Including nearly new sanding belts All documentation included Note – Used Machines: • Technical data and prior sale subject to change. • Prices quoted are ex location – loaded free on truck! • The machine has been cleaned and tested for functionality. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Būklė: naudotas, Gamybos metai: 2005, Apdirbimo matmenys: 3000 x 1600 x 180 mm Aukšto slėgio siurblys 60 AG / 45 kW Modelis E-60 Darbinis slėgis 4 130 BAR Vandens suvartojimas 4,69 litro/min. Programinė įranga: Watercad-CAM Automatinis pjovimo optimizavimas Sandėliavimo vieta: klientas Njdpfx Aexgfbqocpjla

Būklė: naudotas, working width 900 mm calibrating unit with steel roller Nlsdew Dq D Uepfx Acpoa combination unit with rubber roller and sanding pad pneumatically actuated sanding pad pneumatic oscillation pneumatic belt tensioning star/delta starter two feed speeds electric height adjustment of the table material thickness gauge

Būklė: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements Nljdpfxoiidm Ns Acpja - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Būklė: naudotas, mašinos/transporto priemonės numeris: 007984, Didžiausias apdirbamas plotis: 1300 mm Mažiausias apdirbamas storis: 4 mm Darbo stalas: fiksuoto aukščio Vakuuminis konvejeris: taip Darbo agregatų skaičius: 4 vnt Nljdpfx Aewqdbmecpsa

Būklė: naudotas, Weinig Unimat 23 Technical data Working width: 30 - 230 mm Working height: 19 - 200 mm mounted on platform bottom – right – left – top – top/bottom Nlsdpjncc Igjfx Acpea without infeed machine only The machine has been dismantled and is available immediately. Transport can be arranged.

Gamybos metai: 1995, būklė: geras (naudotas), Kuper Veneer Zig-Zag Splicing Machine, Model FW/1200-E Year of manufacture: 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: - High feed speed of 60 m/min - Electronically infinitely adjustable zig-zag width of the glue thread cutting unit Maximum veneer thickness: 3.0 mm Minimum veneer thickness: 0.3 mm Glue thread with hot air heating Compressed air generation Disc for transporting veneer over the veneer table Foot pedal control Feed speed: 35–60 m/min Voltage: 400 V, 50 Hz Total power: 1.35 kW Working height: 915 mm Nlsdpfxshbp Ifo Acpea Weight approx.: 440 kg Dimensions: 2.12 m x 0.73 m x 1.55 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, mašinos/transporto priemonės numeris: 241.125, Funkcionalumas: visiškai funkcionalus, Horizontalioji juostinė pjovimo staklės, gamintojas Schelling, skirtos medienos pagrindo medžiagoms pjauti HPO – pjovimo optimizavimo programa Pjūklo disko išsikišimas: maks. 95 mm Pjūklo vežimėlio judėjimo greitis iki 120 m/min Pjovimo ilgiai: Modelis FH 4 430 – 4.300 mm Galima apžiūrėti veikiančią iki 2026 metų pradžios (numatomas išmontavimas) Didžiausias pjūklo disko skersmuo – 350 mm Išsikišimas – 95 mm Njdex Ebzdopfx Acpjla Spaustuvo atidarymas 90 mm Pagrindinio pjūklo variklio galia – 15 kW Pjūklo brėžiantysis disko skersmuo – 300 mm Padavimo greitis pirmyn iki 80 m/min atgal 80 m/min Pjūklo padavimo greitis pirmyn iki 120 m/min atgal 120 m/min

Būklė: naudotas, mašinos/transporto priemonės numeris: 006290, Max. working width: 1300 mm Nljdpsu A Evhefx Acpsa Max. working height: 100 mm Number of rollers: 2

Būklė: labai geros būklės (naudotas), Apatinio veleno frezavimo staklės SCM T130E su lango apvadų agregatu Veleno skersmuo: 35 mm Bendras veleno ilgis: 140 mm Veleno greitis reguliuojamas su dažnio keitikliu iki 10 000 aps./min Nedpfoxbnyrjx Acpjla Pagrindinio variklio galia: 5,5 kW Langų apvadų pjovimo agregatas Agregato galia: 2,2 kW Elektroninis veleno aukščio reguliavimas Elektroninis tvorelės reguliavimas 4 ritinėlių Masterwood padavimo įrenginys Padavimo greitis reguliuojamas per variatorių CE sertifikatas DTR dokumentacija Pagaminimo metai: 2005