Pjūklas, dantytas pjūklelis

MS 35-SF

Sąlyga: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED SQUARING AND EDGE BANDING MACHINE – 1st machine in line Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 45 mm Working width (min/max): 236 / 1300 mm Control/Software: ICOS Open Feed speed (adjustable): 10 / 50 m/min No transmission bar (Master & Slave systems) Safety and noise protection cabin Pjdpfx Aedh Tfgjfwjgw SQUARING SECTION (per side): Spray unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free position EDGE BANDING SECTION (per side): Gluing unit (Hot Melt + premelter) 04.1570 Pressure zone for edging Edgeband magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flush trimming unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free position

Sąlyga: naudotas, Automatic packaging machine, sealer SIAT / BRÜNINGHAUS type XL-35-94 / P Carton taping machine, automatic case sealer, semi-automatic sealing machine Serial no. 19084 Year of manufacture: 2004 Carton length: 160 mm – unlimited Carton height: 120–510 mm Carton width: 120–510 mm Power supply: 400 Volt, 50 Hz, 260 Watt - Manual adjustment of the side transport belts for carton width, via hand crank - Carton feed via transport belts on both right and left sides - Manual height adjustment of the upper taping station, via hand crank - Seals both the bottom and the top of the carton with two separate tape stations Pjdpfx Afet Exq Nowsgw - 2 taping heads for processing self-adhesive tape, width 75 mm, likely type K12 - Tape stations for self-adhesive tape (also suitable for large rolls Ø 300 mm) - Height-adjustable feet for adapting the working height Footprint (L x W x H): 1150 x 1100 x 1350 mm Weight: 185 kg Good condition

Gamybos metai: 2016, Sąlyga: labai geros būklės (naudotas), Böhl - Wrapping Machine Type JUNIOR/S-450 VA Pgsdpslcc U Eefx Afwew Product Dimensions: Length: 600/800 mm maximum 5800 mm Width: 15 mm maximum 220 mm Height: 15 mm maximum 120 mm Weight maximum 30 kg/meter The maximum cross-sectional diagonal of the previous customer was 220 mm. The specified weights are only possible with a powered, customer-provided roller conveyor. Technical Data: Electrical Control: Siemens S7 with TP Control Voltage: 24 V DC Operating Voltage: 3 x 400 V/50 Hz, N, PE Pneumatics: FESTO Compressed Air: 6 bar, dried, filtered, and oil-free Air Consumption: approximately 20 NL/cycle Maximum Infeed Pressure: 8 bar Noise Emission Level: less than 80 db/A Machine see layout drawing Operating Side: right in conveying direction Control Cabinet: left, fixed to the machine Paint Machine 7032, grey Black-yellow Roller Conveyor Height: 900mm

Sąlyga: naujas, Vacomats are mobile dust extractors capable of collecting large volumes of dust and chips in very confined spaces. These clean air extraction units (negative pressure systems) are designed for indoor installation and can be used either for single-machine or multi-machine dust extraction, handling air volumes of up to 10,000 m³/h. Manufactured according to the latest EU standard EN 16770, they are particularly suitable for woodworking operations that must comply with heightened safety requirements due to the risk of dust explosions. Suitable for substances in dust explosion class St1. The filter cleaning mechanism of the Vacomat XPe operates fully electro-mechanically via an efficient shaking motor, which automatically activates when all connected machines have shut down. The control is managed through a signal from the woodworking machine using volt-free contacts. Motorized filter shaking is included in the scope of supply. Supplied without coils. Features: - Motorized filter regeneration - Mobile design - Extraction connections can be positioned right or left (can be reconfigured) - Height reduction for transport possible ----- Technical Specifications ----- Extraction nozzle Ø: 200 mm Airflow rate: 2,495 m³/h Nominal airflow: 2,262 m³/h Max. negative pressure: 2,000 Pa Filter surface area: 14.5 m² Residual dust content: < 0.1 mg/m² Number of collection bags: 3 pcs Motor power: 4.0 kW Dimensions (LxWxH): 2,645 x 900 x 2,130 mm Weight: 500 kg Sound pressure level: 73 dB(A) Pedpju T Dv Esfx Afwsgw Dust class: M Includes: attached control cabinet

Sąlyga: labai geros būklės (naudotas), Hoffmann MS35-SF/S07.117 dviguba kampinė pjovimo staklė Pjovimas 45° kampu Pjūklo varikliai: 4 × 2,2 kW Pjūklo sukimasis: 3000 aps./min Pjūklo dydis: 350 mm, skylė 30 mm Maks. darbinis plotis: 80 mm Maks. darbinis aukštis: 80 mm Podpfx Aew T R T Tsfwogw Kiaurymės frezavimo agregatai: 2 × 0,5 kW Frezavimo galvučių sukimasis: 19 000 aps./min Galima nustatyti dvi frezavimo padėtis Darbinis slėgis: 6 bar CE sertifikatas DTR dokumentacija Svoris apie 800 kg Bendri įrenginio matmenys su stalais: 658 × 92 × 170 cm (A)

Sąlyga: naudotas, corner turner, roller conveyor, roller track, powered roller conveyor, roller conveyor, roller track with strip feeder, transfer station -Transfer station: 1x roller conveyor with conveyor belt, 1x conveyor belt -Base frame: robust, height-adjustable base frame -Speed: roller conveyor 20 m/min / conveyor belt 23 m/min Pgedpferv Av Iex Afwjw -Roller conveyor: conveyor rollers Ø63 x 2500 mm, conveyor belt 17 x 2815 mm -Conveyor belt: 6 belts 17 x 2830 mm -Drive/gearbox: Nord, see photos for type plates -Transport dimensions: 2810/1660/H870 mm / 2900/920/H870 mm -Weight: 569 kg / 258 kg

Sąlyga: naudotas, Horizontal conveyor belt, 13,500 x 800 mm wide, 13.5 m long, Price: €4,900, Contact: Mr. Rainer Eckerle Pedpfx As R U U Asfwsgw

Gamybos metai: 2009, Sąlyga: naudotas, Roller conveyor, roller table, powered roller conveyor, roller track -with rotary unit, rotatable via servo motor -robust construction -electrically driven Pgedpfx Asb A S Ugefwow -drive motor: 0.37 kW, 76 rpm -roller width: 1450 mm -conveying length: 1400 mm -roller diameter: 105 mm -rollers: rubber-coated -shaft diameter: 25 mm -conveying height: adjustable, 950 mm -driven by belt -dimensions: 1400/1650/H960 mm -weight: approx. 300 kg

Sąlyga: labai geros būklės (naudotas), ZIM Hülsta Case Lifter The case lifter is used for lifting and further conveying assembled carcasses. Case lifters are primarily used in pass-through carcass presses. They facilitate the handling of large workpieces when setting them upright. Transport and assembly device within a carcass assembly line. Behind a throughfeed carcass press, the pressed carcasses are laid on their back using this device. This allows assembly work on the underside to be performed. Manufacturer: ZIM Hülsta-Werke Type: Case Lifter Dimensions: Pgsdpfx Afevdb Ixewew You can find more new and used items in our shop! International shipping costs on request!