"Kuper" faneros surinkimo mašina

Kuper FW/ 1200-E

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Duedpfxefxyhfs Aaaep Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SÇ 403 Alüminyum Pvc Kesim Makinası, • Atitinka CE standartus. • Naudojama aliuminio ir PVC profiliams pjauti. • Hidropneumatinis pjovimas. • Pjovimo greičio reguliavimas pagal profilį. • Gali pjauti fiksuotais kampais į dešinę ir kairę: -60, -45, -30, -22,5, -15, 0, +15, +22,5, +30, +45, +60 laipsnių. • Pneumatinės vertikalios ir horizontalios spaudimo sistemos. • Ø600 arba Ø650 mm deimantinis aliuminio pjūklas. • Yra ritininis konvejeris (3 m dešinėje ir kairėje). Dedjramrzepfx Aaaoup • Alyvos purškimo sistema. • Precizinis pjovimas su 3 kW varikliu ir hydro-check sistema. • Galima naudoti su skaitmeniniu metru.

Būklė: naujas, Gamybos metai: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder and anodised aluminium sliding table Robust steel and cast iron construction Large supporting surface and precise cast iron table High-precision format sliding table made of anodised aluminium (travel 2250 mm) Large crosscut frame (900 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm, fitted with professional flip-over stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° to 45° Rip fence with fine adjustment Stable saw unit and large double trunnion spindle moulder unit for maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-relieved cast iron Three manually adjustable spindle speeds, 3500-10000 rpm Spindle moulder with right/left rotation Standard supplied hood guard for curved work Safety reversing aluminium fence jaws Two powerful motors with high power reserves Two plug-in handwheels for quick and convenient operation Dimensions and Weights Weight approx. 470 kg Extraction Connection Extraction nozzle diameter: 2 x 120 mm Extraction nozzle diameter (saw blade guard): 60 mm Electrical Data Drive motor power: 2 x 5.0 kW Dodpfjhp Rdlex Aaajup Connection voltage: 400 V Network frequency: 50 Hz Spindle Moulder Spindle tilt: 0 to -45° Usable spindle length: 100 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter non-retractable: 210 mm retractable: 180 mm Tenoning: 275 mm Circular Saw Unit Crosscut length: 1600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 2660 mm Saw blade tilt: 90-45° Max. cutting height 90°: 90 mm Max. cutting height 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 78 mm (Main) saw blade diameter: 315 mm (Main) saw blade diameter explained: independent of scorer (Main) saw blade speed: 4000 rpm Sliding Table and Table Table length: 1112 mm Table width: 430 mm Scope of delivery: Hood guard for curved work Anodised aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2026, The TYTAN CENTER 750 Vario lathe-milling machine combines two machines into one unit for enhanced user convenience and space-saving in the workspace. It features stepless spindle speed control for both the lathe and milling operations. Turning capacity: 250x750mm, 0.75 kW/230V; Milling capacity: 0.6 kW/230V. Lathe functions include: external and internal cylindrical surface machining, threading, and cutting of workpieces. Milling functions include: slot milling, drilling, and reaming. This machine is ideal for small-scale industrial enterprises, workshops, garages, etc. Main machine advantages: - Combination of two functions—turning and milling—in one compact design. - Separate spindle motors for the lathe and mill, each with stepless speed regulation, enabling independent operation. - LCD displays for accurate speed monitoring and precise spindle speed adjustment. - Two spindle speed ranges to suit various materials and machining methods. - Complex workpiece machining—no need for reclamping between machines. - Rigid dovetail guideways—for high stability during milling. Technical specifications: LATHE - 3-jaw chuck: 125 mm - Swing over bed: 250 mm - Swing over cross slide: 150 mm - Distance between centers: 750 mm - Bed width: 135 mm - Spindle bore: 29 mm - Spindle taper: MT4 - Spindle speed control: Stepless (2 ranges) - Spindle speeds: 50–1125 / 100–2250 rpm - Metric threads: (18) 0.2–3.5 mm - Imperial threads: (21) 8–56 TPI - Longitudinal feed: (6) 0.07–0.4 mm/rev - Compound rest size: 65 x 65 x 20 mm - Max. tool dimension: 12 x 12 mm - Top slide travel: 70 mm - Cross slide travel: 130 mm - Longitudinal travel: 630 mm - Tailstock quill diameter: 30 mm - Tailstock quill travel: 70 mm - Tailstock taper: MT2 - Motor power (S1/S6): 0.75 / 0.9 kW / 230 V MILLING MACHINE - Max. drilling diameter: 16 mm - Spindle quill taper: MT2 - Quill travel: 50 mm - Head tilt: –90° to +90° - Spindle–column distance: 170 mm - Spindle–table distance: 43–250 mm - Spindle speed range: 50–2250 rpm - T-slot size/number: 2 x 8 mm - Motor power: 0.6 kW / 230 V GENERAL PARAMETERS - Machine dimensions (LxWxH): 1350 x 580 x 1630 mm - Weight: 230 kg Duodpfx Aaew H Rdmoasp Standard equipment: - 125 mm 3-jaw lathe chuck with reversible jaws - Machine base - Fixed centers MT2 and MT4 - Drill arbor and chuck MT2/B16 - Change gears - Set of wrenches, oil can, service tools - CE-compliant guards

Būklė: naujas, Kepimo krosnis picai su dviem aukštais, garų gaubtu ir fermentacijos kamera GMG Kepimo kamera visiškai pagaminta iš ugniai atsparaus akmens Temperatūros diapazonas: 50–400°C Priekinė pusė pagaminta iš nerūdijančio plieno Skaitmeninis valdymas Viršutinė ir apatinė kaitra reguliuojamos atskirai Skaitmeninis viršutinės ir apatinės kaitros parametrų stebėjimas Skaitmeninė klaidų kodų sistema Aukšto patvarumo, atspari temperatūrai durų konstrukcija su spyruokle Dviejų stiklų durys, sustiprinta izoliacija ir oro cirkuliacija Dsdjuu H Aljpfx Aaajup Išoriniai matmenys: 149 x 110 x 194 cm Vidiniai matmenys: 105 x 70 x 15 cm Elektros galia: 2 x 8 kW – 3NAC I 400 V Fermentacijos kamera: 149 x 93 x 90 cm – 3 kW ir 230 V Svoris: 500 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, Control: MITSUBISHI MELDAS M70 Table dimensions: 910 x 400 mm Max. table load: 960 kg X-axis travel: 760 mm Y-axis travel: 445 mm Z-axis travel: 520 mm Spindle speed: 12,000 rpm Tool holder: MAS BT40 Drive power: 22 kW Tool magazine: 22 positions Weight: 4,400 kg Dimensions: 2,200 x 2,200 x 2,700 mm Dsdjv H D E Sjpfx Aaaoup Equipment, Accessories - Coolant system - Chip conveyor - Manuals

Būklė: naudotas, Presssystem: Kontinuierlich / Kalander Duedpfx Aasul H Nmjasp Hauptlieferanten: Bison / Berstorff Konstruktive Leistung: 160 m³/Tag Erreichte Kapazität ca.: 200 m³/Tag Effektive Betriebszeit: 23 Std./Tag Referenzdicke: 3,2 mm Max. Bruttobrettbreite: 2500 mm Max. Nettobrettlänge: 2440 mm Max. Nettobrettbreite: unbegrenzt Min. Nettobrettbreite: 1220 mm (teilbar) Min. Brettdicke: 2,0 mm Max. Brettdicke: 10 mm Elektrisches System: 380 V, 50 Hz Baujahr: 1985 Hauptmodernisierungen: 2007-2009, 2016 Betrieb bis: Mai 2018

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 06651, X ašies eiga: 6 800 mm, Y ašies eiga: 3 700 mm, Z ašies eigos atstumas: 1 500 mm, X ašies padavimo greitis: 15 m/min, Y ašies padavimo greitis: 15 m/min, padavimo greitis Z ašis: 10 m/min, bendras ilgis: 15 000 mm, bendras plotis: 7 500 mm, veleno greitis (maks.): 4 000 aps./min, bendras aukštis: 7 000 mm, stalo aukštis: 1 100 mm, greitas poslinkis X ašimi: 15 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 10 m/min, atstumas tarp stulpų: 3 300 mm, įvesties srovės tipas: trifazis, stalo apkrova: 50 000 kg, sukimosi greitis (maks.): 4 000 aps./min, atstumas nuo stalo centro iki veleno galo: 2 110 mm, bendras svoris: 110 000 kg, ašies variklio galia: 50 000 W, valdymo spintos ilgis: 7 000 mm, valdymo spintos aukštis: 2 000 mm, valdymo spintos plotis: 600 mm, Įranga: sūkių greitis be galo kintamas, Portalinis frezavimo staklės 5 ašių apdirbimui, labai geros būklės. Dujdpfx Aasyahv Seasp

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, TAKISAWA EX-122 CNC TEKINIMO STAKLĖS Kategorija: CNC tekinimo centrai Nuorodos Nr.: 311121 Galia: Ø610 x 1524 mm Pagaminimo metai: 2007 Techninės specifikacijos: CNC Valdymas: Fanuc 21iT DARBO TALPA Didžiausias tekinimo skersmuo: 610 mm Didžiausias tekinimo ilgis: 1524 mm Sūpavimas: 910 mm Kreipiančiosios: linijinės LM REVOLVERINIS BUKSAS Revolveris: 10 stočių GALINIS CENTRAS Galinė atrama: MT5 Dedpex Ehhdjfx Aaaoup VERPTUVAS Maks. apsukų skaičius: 1200 aps./min Verptuvo nosis: A2-15 Verptuvo anga: 200 mm Verptuvo tipas: pavaromas krumpliaračiais

Būklė: naujas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Įranga: CE žymėjimas, dvipusis, Line for lengthwise joining with two milling machines. Press length 6,000 mm. The machine is new and has never been used. All corresponding tools are included with the machine. Dusdowptnmjpfx Aaaep