Pramoninis robotas

FANUC P-250iA

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2008, The wrist is used and has been overhauled. There are 2 units available. Godpfx Afsihb Axs Dsua

Gamybos metai: 2006, būklė: paruoštas naudoti (naudotas), A welding cell including a robot and welding unit is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5,250h, operating hours: 1,244h. 1) Robot: Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1,373mm, repeatability: +/-0.08mm, weight: approx. 238kg. 2) Welding unit: Fronius Magic Wave 4000, year of manufacture: 2006. An on-site inspection is possible. Gsdpfjviv Dlox Af Deua

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2006, veikimo valandos: 39 475 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 80022, bendras svoris: 520 kg, keliamoji galia: 15 kg, rankos pasiekiamumas: 2 800 mm, pasukimo diapazonas: 320 °, valdiklių gamintojas: FANUC, valdiklio modelis: RJ3iC, teach pendant gamintojas: FANUC, valdymo spintos plotis: 800 mm, valdymo spintos aukštis: 1 360 mm, įėjimo įtampa: 400 V, įėjimo srovė: 20 A, įvesties srovės tipas: Oro kondicionierius, kartojimo tikslumas: 2 mm, This is a paint robot from Fanuc. It was previously used at BMW for clear coat application on luxury car bodies and, with its 40,000 operating hours, it has a considerable amount of working life behind it. The robots at BMW operated on a rail system, which is why the controller features a large additional amplifier. A second auxiliary amplifier is used for driving the shoulder-mounted motors for gear pumps; however, these motors are not installed. The rail motor would be connected directly to the robot. The cable length between the robot and the controller is 10m and features plug-in connections at the controller—this is also a notable feature. We can assist with transportation and installation. The robot, together with its controller, is fixed transport-ready on a special pallet measuring 2500x800x1600mm. Gedpfx Aotu H Hcjf Djua It is currently configured as a left-arm, left-handed version. It is equipped with line tracking. However, this configuration can easily be changed without mechanical modifications. The unit is still at our customer’s site but can be demonstrated under power at Paintrobotics for serious inquiries. We have two units available. For demonstration, we would transport the robot from Frankfurt to our facility.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2007, veikimo valandos: 92 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 82351, bendras svoris: 520 kg, keliamoji galia: 15 kg, rankos pasiekiamumas: 2 800 mm, pasukimo diapazonas: 320 °, valdiklių gamintojas: FANUC, valdiklio modelis: RJ3iC, teach pendant gamintojas: FANUC, valdymo spintos plotis: 800 mm, valdymo spintos aukštis: 1 360 mm, įėjimo įtampa: 400 V, įėjimo srovė: 20 A, įvesties srovės tipas: Oro kondicionierius, kartojimo tikslumas: 2 mm, This is a paint robot from Fanuc. It comes with a very special configuration. Originally, it was intended as a replacement robot at BMW for clear coat application on luxury car bodies. The robot was never used and is therefore in like-new condition. At BMW, these robots operated on a rail. For this reason, the controller is equipped with a large additional amplifier. The corresponding motor is included and can simply be connected directly to the robot itself, allowing for direct mounting onto the carriage. Gujdotu H Avepfx Af Dea Another notable feature of this robot is the built-in motor in the shoulder, which is used to control a gear pump. This allows for precise dosing on the robot without issue. The cable length between the robot and controller is 2x10m and is pluggable at the controller. This means you have 10 m of cable, e.g. routed through a drag chain from the rail, and then another 10 m, also pluggable, to the controller. This is another special feature. We provide a 1-year commissioning warranty. We can assist with transport and installation. The robot is mounted together with the controller, transport-ready, on a special pallet measuring 2500x800x1600mm. Currently, it is configured as a right-arm, right-handed unit, but this can be easily changed without any mechanical modifications. The unit is still located at our customer’s site, but can be viewed under power at Paintrobotics, given serious interest. For this, we would arrange to transport the unit from Frankfurt to our facility.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Fanuc R2000iB/210F, 20% nuolaida užsakant daugiau nei 1 robotą. GSG ROBOTICS PLĖTRA GSG Robotics GmbH, įkurta 2005 m. Geterslohe, nuo 2015 m. įsikūrusi Marle, turi didelę aptarnavimo zoną robotų priežiūrai ir remontui. Bėgant metams tapome visapusišku partneriu visais klausimais, susijusiais su pramoniniais robotais ir automatizavimo technologijomis. Esame pilno aptarnavimo tiekėjas dviem žinomiems robotų gamintojams – ABB ir Fanuc. Guedjxq Tu Hjpfx Af Doa

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2011, veikimo valandos: 2 509 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 111313, bendras svoris: 520 kg, keliamoji galia: 15 kg, rankos pasiekiamumas: 2 800 mm, pasukimo diapazonas: 320 °, valdiklių gamintojas: FANUC, valdiklio modelis: R-30iA, teach pendant gamintojas: FANUC, valdymo spintos plotis: 800 mm, valdymo spintos aukštis: 1 360 mm, įėjimo įtampa: 400 V, įėjimo srovė: 20 A, įvesties srovės tipas: Oro kondicionierius, kartojimo tikslumas: 2 mm, This is a paint robot from Fanuc. It features a very special configuration. It was originally intended for coating wind turbine blades. For this purpose, it was mounted on a 60-meter-long rail, which included an additional rail enabling the robot to move up and down. Therefore, two large additional amplifiers are integrated in the controller. The encoder brake module is also duplicated for this reason. Another unique feature of this robot is that motors are installed in the shoulder to control two gear pumps, making 2-component mixing on the robot effortless. The robot was never actually put into operation. The operating hours accrued solely because the robot remained powered. The system operators (Enercon) have confirmed this. The actual Servo ON time is only 0.2 hours. The robot shows minor signs of contamination but is practically in mint condition. Unfortunately, the teach pendant and teach cable are heavily soiled, but they can be replaced if required. The cable length between the robot and the controller is 5 m and features a plug-in connection at the controller – another special feature. We provide a 1-year commissioning warranty. We can assist with transportation and installation. The robot is secured together with the controller on a special pallet measuring 2500x800x1600 mm, ready for transport. We have two units available; the price applies to one robot. It is currently configured as a right-arm/right-hand unit, but this can be easily converted without mechanical modifications. Gusdpfx Afstu Hpqs Dsa The unit can be viewed under power at Paintrobotics.