Fixed holder ER-030678 , Pendulum holder 3D ER-030923

Erowa Fixhalter, Pendelhalter 3D

Būklė: naudotas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bush): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven stations on turret: 6 - Max. diameter in sub spindle: 12.7 [mm] Bljdjuhav Dspfx Ai Eep - Sub spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] ACCESSORIES - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub spindle - Brake for main spindle and sub spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various fixed and driven tool holders

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2010, valdiklių gamintojas: MAZATROL, valdiklio modelis: MATRIX, Ši 3 ašių Mazak QTN 250 MX 1000 horizontalioji tekinimo mašina buvo pagaminta 2010 m. Jei norite gauti aukštos kokybės tekinimo galimybes, apsvarstykite mūsų parduodamą Mazak QTN 250 MX 1000 staklių. Norėdami gauti daugiau informacijos, susisiekite su mumis. Mašinos privalumai Techninės mašinos privalumai • Maks. Talpa: 640 • X ašies greitojo tiekimo greitis: 36000 / z ašies greitojo tiekimo greitis: 36000 / c ašies greitojo tiekimo greitis: 555 • Apdorojamas skersmuo: 380 Bledjyalpcopfx Ai Esp • Maksimalus apdirbamas ilgis: 600 • Baro talpa: 76 • Savaiminio centravimo matmenys (pagrindinis velenas): 250 • Eiga: 1000/kūgis: cm 4 • Aušinimo skysčio bakas: 300 l

Gamybos metai: 1999, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt, 50 Hz Connected load: 9 kW Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Accessories: Bodpfer A Hcbjx Ai Ejlp • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Our direct contact details and further information about the machine can be found in the attached PDF document.

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 100 kg, bendras ilgis: 800 mm, bendras plotis: 600 mm, bendras aukštis: 1 660 mm, įėjimo įtampa: 230 V, įėjimo dažnis: 50 Hz, lazerio galia: 20 W, lazerio bangos ilgis: 1 064 nm, aušinimo tipas: oras, lazeri tipas: šviesolaidinis lazeris, The universally deployable laser marking system LAS 28 by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 Watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without advanced programming knowledge. The software can automatically sequence serial and part numbers after prior configuration. Additionally, it can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with mounting bracket and Windows operating system. Optionally, the LAS 28 laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options such as side outriggers for marking long parts are available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction system (incl. activated carbon filter) Bjdpfxsv Sybyj Ai Eolp • Optional: autofocus system – for automatic determination of focal distance • Signal tower to indicate operating status • Marking software EZCAD (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Maximum component height approx. 270mm • Electrically adjustable Z-axis (working plane adjustment) • Aluminum profile frame • 230V connection • Air cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg

Būklė: geras (naudotas), Gamybos metai: 2003, Visos ranka parodytos dalys nepridedamos. Techninė informacija pateikta nuotraukoje. Bljdpfx Ajyyniaei Esp

Būklė: naudotas, Gamybos metai: 1998, Grinding length 2000 mm Grinding width 600 mm Total power requirement 17 kW Machine weight approx. 10 t O F F E R We are pleased to offer you, subject to prior sale and error, from our stock and without obligation: GEIBEL & HOTZ CNC Cycle Controlled Surface & Profile Grinding Machine Model FS 2060 - GT SL Year 1998 Serial No. 1013220998 _____ Max. grinding length (max. table longitudinal movement 2,050 mm) 2,000 mm Max. grinding width (max. cross movement 600 mm) 600 mm Max. grinding height under wheel approx. 600 mm Blsdpfev S Ip Eex Ai Ejp Distance table – spindle center min./max. 180 – 800 mm Table size 2,300 x 550 mm Magnetic chuck size 2,000 x 600 mm Max. table load 3,110 kg Table speed 0 – 35 m/min Cross movement intermittent 0.5 – 60 mm/stroke Cross feed / rapid traverse 0 - 4,000 mm/min Grinding wheel dimensions, standard 400 x 100 x 127 mm Grinding spindle speeds, stepless 1,000 – 3,000 rpm Grinding spindle drive approx. 11 kW Total drive approx. 25 kW - 400 V – 50 Hz Weight approx. 9,500 kg Accessories / Special Equipment • Dialog-guided GEIBEL & HOTZ automatic grinding cycle control Type SL for 3 axes. Graphically supported data input in absolute values or via teach-in method in pre-programmed grinding and dressing cycles. SIEMENS LCD display with softkeys for setting all parameters and clear monitoring of axis movements and work progress. • Electronic handwheel for 3 axes X, Y, Z, selectable feed rate 0.01 / 0.1 / 1 mm/rev. • Table movement via roller ring threaded drive (GT), allowing very high and very low table speeds with constant torque and very high efficiency. • Cross and vertical movements via ball screw drive with incremental glass scale. • Single-grain diamond dresser mounted on the table. (Machine was previously equipped with an electronic straight dressing unit EGA 100, which is currently not present.) • MPM fully automatic balancing device AB 100 (the flange-mounted sensor is currently missing). • Built-in fine-pole electromagnetic chuck 2,000 x 600 mm with adjustable holding force • Wet grinding system with universal paper band filter unit UPF 100 with magnetic separator • Fully enclosed work area with electrically monitored sliding doors • Separate switch cabinet, separate mobile operating panel, various accessories, operating manuals Condition: Good to very good condition! Suitable for all grinding applications! Please click here soon for a video of the machine: Delivery: ex stock, immediate, FCA Metzingen Payment: strictly net - after receipt of invoice

Būklė: naudotas, Field of view at 50x on the objective: 11.2 x 9.2 mm Field of view at 100x on the objective: 5.6 x 4.6 mm Projection area: 560 x 460 mm Objective table size: 230 x 165 mm Glass stage diameter: 80 mm Weight approx.: 230 kg Required space: 1030 x 780 x 1800 mm Bledpfsb Nxl Isx Ai Eop

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 341883, TECHNICAL SPECIFICATIONS Capabilities: Maximum turning diameter: 270 mm Maximum diameter over cross slide: 160 mm Center height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on equipment): 630 mm Headstocks: Standardized spindle nose, enabling use of various collets and chucks with appropriate adapters. Collet accessories SCHAUBLIN: B45/F66 Maximum bar capacity, diameter: 36 mm/60 mm Standard power chuck, diameter: 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle: 15 / 18.5 kW Maximum torque at 100% / 50% duty cycle: 135 / 165 Nm Maximum spindle speed: 4000 rpm Spindle positioning increment: 0.1° C Axis: Programmable increment: 0.001° Spindle locking torque: 80 Nm Pneumatic clamping cylinder: 3400 daN Cross Slide: Transverse travel, X axis: 230 mm Radial resolution: 0.0005 mm Bjdpfxszb U Epe Ai Eslp Driven by AC motor, nominal torque: 3 Nm Ball screw, dia. x pitch: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm Driven by AC motor, nominal torque: 6 Nm Ball screw, dia. x pitch: 32 x 10 mm Feeds: Working feed, X/Z axes stepless: 0–5000 mm/min Rapid traverse, X/Z axes: 8/10 m/min Feed force, X/Z axes: 420/670 daN Turret Tool System: Number of tool stations: 12 Number of driven tool stations: 6 Driven by AC motor, intermittent power: 3.7 kW Max. intermittent torque: 36 Nm Max. drive speed: 5000 rpm Standardized toolholder mounting: VDI 30 Maximum turning tool section: 20 x 20 mm Integrated coolant Indexing in both directions Coolant: Tank capacity: 120 liters Pump flow rate: 10 l/min Pressure: 5 bar Inventory 2230043 includes: 1 Fanuc 18i control 1 A2-6 spindle headstock 1 12-position VDI 30 turret for 6 driven tools 1 pneumatically-operated tailstock support 180-65.200 1 SCHUNK Rota-s 200-52 A2-6'' 3-jaw chuck 1 Brucker CM5 live revolving center 1 ESX-25 radial drilling-milling head, max speed 5000 rpm, without EX nut, ref 4100.00552 1 ESX-25 axial drilling-milling head, max speed 5000 rpm, without EX nut, ref 4100.00550 1 KENNAMETAL ESX-25, without EX nut 1 EWS ESX-25, without EX nut 4 short left radial toolholders, type B2, ref 4100.0100 1 ESX-25 collet holder, type E3, with EX25 nut and 5 mm collet 1 similar, without EX25 nut 3 tapping collets, Ø 4.5, 6, and 8 mm 1 toolholder for indexable insert drills, Ø 40 mm bore, type E1, ref 4100.00124 1 similar, Ø 32 mm bore, ref 4100.00107 1 similar, Ø 20 mm bore, ref 4100.00105 1 boring bar holder, Ø 8 mm, type E2, ref 4100.00108 1 similar, Ø 10, ref 4100.0109 1 similar, Ø 12, ref 4100.0110 2 similar, Ø 16, ref 4100.0111 1 similar, Ø 20, ref 4100.0112 1 similar, Ø 25, ref 4100.0113 1 similar, Ø 32, ref 4100.0115 1 similar, Ø 32 GARANT, long 5 steel protective plugs, type Z2, ref 4100.00130 1 axial left toolholder, C4 force, ref 4100.00103 1 pneumatically-operated support tailstock CM 5, ref 180-65.200 1 stand for microscope only, ref 180-60.005 1 coolant system OPTION 1 hinged steady rest with 3 fingers for Ø 30 – 120 mm, ref 180-70.200, CHF 2,500.– + VAT All technical information provided without liability for errors or omissions.

Būklė: geras (naudotas), Gamybos metai: 2005, Mazak Integrex 300 - III tekinimo-frezavimo centras, pagaminimo metai 2005, CNC valdymas 640 MT, X/Y/Z eiga 630/230/1.585 mm, B ašis NC pasukama galva -30°/+195°, 80 vietų Capto įrankių magazinas, pagrindinis velenas 26 kW, C ašis 0,001°, uodegėlė MK 5, aukšto slėgio aušinimas 70 bar su filtrų sistema, Tooleye, 5 ašių vienalaikio apdirbimo paketas, Mazak stebėjimo sistema, drožlių transporter, Bjdpfx Aieyzfr Ij Eelp

Gamybos metai: 1999, būklė: labai geros būklės (naudotas), 600 KG 10 BAR Bljdoxy Ikbopfx Ai Esp