Giluminio erozijos mašinos nuo 700 mm išilginio eigos pirkti naudotą (31)

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Completely overhauled OPS Ingersoll Gantry 800 Eagle sinker EDM – technically and visually in top condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent technical and visual condition. During the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully inspected and replaced as needed, including, among others, ball rollers and drive spindles. This was followed by complete geometric measurement, alignment, and additional inspection using a laser measuring system. The machine bed and entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, were completely replaced. The machine also received a brand-new paint job and presents itself in a very well-maintained visual state. The generator and control system were cleaned and technically inspected. The generator's cooling unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent comprehensive EDM testing according to OPS Ingersoll's quality and test standards. The machine is immediately available and ideally suited for reliable production use. Hsdpjyr I Aiefx Ab Seni Technical Data: - Ingersoll (OPS Ingersoll) - Sinker EDM machine - OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn rapid programming - Powertec Handheld – multifunctional hand control device - Manual EDM with Powertec Handheld - High Speed Jump max. 18 m/min - Generator output: 60 Ampere, EAGLE Powertec - Travel range (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up rotary changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Work table (W x D): 760 x 1000 mm - Load capacity: 2,000 kg Accessories: - CO2 fire suppression system - Integrated cartridge filter system Special Equipment: - Linear measuring system on all axes (standard on Z-axis in this series)

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2013, X ašies eiga: 550 mm, Y ašies eiga: 850 mm, Z ašies eigos atstumas: 450 mm, ruošinio svoris (maks.): 2 000 kg, stalo plotis: 760 mm, atstumo iki veleno lentelė: 585 mm, stalo ilgis: 1 000 mm, ruošinio ilgis (maks.): 1 095 mm, ruošinio plotis (maks.): 795 mm, ruošinio aukštis (maks.): 480 mm, bendras svoris: 6 800 kg, paskutinio kapitalinio remonto metai: 2025, stalo apkrova: 2 000 kg, greitasis eiga Z ašyje: 18 m/min, Įranga: dokumentacija / vadovas, OPS INGERSOLL GANTRY EAGLE 800 Refurbished Year of manufacture: 2013 EAGLE Powertec PC/NC control 3060 22" display with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control device Manual EDM with Powertec Handheld EAGLE Powertec - Finish Generator PT 60, 60 Ampere High Speed Jump max. 18,000 mm/min. Travel ranges (X, Y, Z): 550 x 850 x 450 mm Hodpfx Abeyrqprj Ssni Distance table/electrode holder min. 135 mm / max. 585 mm Electrode changer 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Worktable (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Head load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS, Hirschmann or System 3R (per customer request) ECOTEC energy saving function standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, X ašies eiga: 1 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 650 mm, stalo plotis: 1 140 mm, stalo ilgis: 1 640 mm, ruošinio ilgis (maks.): 1 770 mm, ruošinio plotis (maks.): 1 270 mm, ruošinio aukštis (maks.): 680 mm, padavimo greitis Z ašis: 12 m/min, stalo apkrova: 7 500 kg, Condition: completely overhauled Control: Mitsubishi - 64 bit CNC Generator capacity: 70 Amps - multipulse Hedpfeyrqn Iox Ab Sjni Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-fold pick-up disc changer Work tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Equipment: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Control: PC-NC dialog Hnjdpfx Aoyriu Hsb Ssi Travels X/Y/Z: 1000/1510/700 mm C-axis 30-position electrode changer Hirschmann clamping system Support surface (W x D): 1140 x 1640 mm Load capacity: 7,500 kg Filtration unit Fire extinguishing system

Būklė: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, Techninės detalės Stalo ilgis: 840 mm Stalo plotis: 600 mm Amperai: 60-120 A Bendras galios poreikis: 15-23 kVA Apytikslis mašinos svoris: 2,75 t Reikalinga erdvė: apie 2760 x 1110 x 1840 mm Papildoma informacija Su valdoma C ašimi ir 16 pozicijų automatinė įrankių keitimo sistema. Hsdpfjyrn E Rex Ab Soni DARBO STALAS Stalo dydis: 840 x 600 mm Dielektriko aukštis virš stalo: 360 mm Maksimalus ruošinio svoris: 1000 kg T formos grioveliai: 4 x 10 mm Atstumas tarp stalo ir siaurapjūvio be tvirtinimo (maks. / min.): 595 / 180 mm DARBO GALVA X - Y eiga: 565 x 400 mm Z eiga: 415 mm X - Y - Z ašių skiriamoji geba: 0,001 mm C ašies skiriamoji geba: 0,001° Greitas judėjimas: 800 mm/min Didžiausias elektrodų svoris be sukimosi: 100 kg Didžiausias elektrodų svoris su sukimu: 15 kg DIELEKTRIKO TIEKIMAS Talpa: 400 litrų Popieriniai kasetiniai filtrai: 4 vnt. GENERATORIUS Matmenys (Aukštis x Plotis x Ilgis): 1800 x 600 x 920 mm Svoris: 300 kg Nominali srovė: 60-120 A Jungties galia: 15-23 kVA Matmenys (Aukštis x Plotis x Ilgis): 2760 x 1110 x 1840 mm Svoris: 2750 kg

Būklė: naudotas, Gamybos metai: 1998, mašinos/transporto priemonės numeris: 22406695, X ašies eiga: 992 mm, Y ašies eiga: 807 mm, Z ašies eigos atstumas: 561 mm, ruošinio ilgis (maks.): 1 260 mm, ruošinio plotis (maks.): 1 060 mm, ruošinio aukštis (maks.): 550 mm, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, Siūlome šią naudotą AEG Elotherm P1 panardomąją erozijos staklę, pagamintą 1998 m. Tipas: P1 Gamyklinis numeris: 22406695 Užsakymo numeris: 704.1177 Įtampa: 400 V Srovė: A Hnjdpfx Asypln Deb Soi Dažnis: 50 Hz Išjungimo metodas: Plan: Pagaminimo metai: 1998 Jei turite klausimų arba reikia papildomos informacijos, rašykite mums žinutę arba skambinkite.

Būklė: naudotas, Gamybos metai: 2012, veikimo valandos: 5 150 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 905 mm, Y ašies eiga: 705 mm, Z ašies eigos atstumas: 450 mm, ruošinio svoris (maks.): 3 000 kg, bendras aukštis: 3 400 mm, bendras plotis: 2 100 mm, bendras ilgis: 3 425 mm, stalo plotis: 850 mm, plunksnos brūkšnys: 710 mm, įvesties srovės tipas: trifazis, atstumo iki veleno lentelė: 250 mm, stalo ilgis: 1 150 mm, garantijos trukmė: 6 mėnesiai, X ašies padavimo greitis: 5 m/min, Y ašies padavimo greitis: 5 m/min, padavimo greitis Z ašis: 15 m/min, įėjimo įtampa: 400 V, bendras svoris: 7 500 kg, paskutinio kapitalinio remonto metai: 2026, stalo apkrova: 3 000 kg, įėjimo dažnis: 50 Hz, greitas poslinkis X ašimi: 5 m/min, greitas poslinkis Y ašis: 5 m/min, greitasis eiga Z ašyje: 15 m/min, Įranga: dokumentacija / vadovas, EDM314MF30 Valdymo sąsaja MF30 Metai: 2012 Darbo valandos: 5150 val. Generalinis remontas Eigos ašys XxYxZ: 905/1020x705x455 mm Darbo stalas: 1150x850 (plieninis stalas su T formos grioveliais) Darbinis bakas: 1200x900 mm Darbinio bako užpildymo aukštis: 500 mm Maksimalus elektrodų svoris: 50/500 kg Ruoinio svoris: 3000 kg Staklių svoris: 7500 kg Staklių matmenys (plotis x gylis x aukštis): 2100x3425x3450 mm Įranga: Spalva: sidabrinė metalinė 30 padėčių įrankių keitiklis Kasetinė filtravimo sistema EROWA ITS greito fiksavimo griebtuvas C ašis 100 aps./min, tiesioginis matavimas 0,0001° C ašies stabdis CO² gaisro gesinimo sistema K&B Priešgaisrinės sklendės Dūmų ištraukimo įrenginys su aktyviosios anglies filtru Integruotas aušintuvas Rankinis valdymo pultas Automatinis bako padavimo mechanizmas Išorinė programavimo stotis Erozinis generatorius 60A Boosterio pasirinktis – 120A erozijai Hnedpeyt Ewgsfx Ab Sji Transportavimas Paleidimas vietoje Apmokymai

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Completely overhauled OPS Ingersoll Gantry 800 Eagle sinker EDM – technically and visually in top condition Hnjdsykn Ngepfx Ab Sei The machine has been thoroughly and professionally overhauled in our facility and is in excellent technical and visual condition. During the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully inspected and replaced as needed, including, among others, ball rollers and drive spindles. This was followed by complete geometric measurement, alignment, and additional inspection using a laser measuring system. The machine bed and entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, were completely replaced. The machine also received a brand-new paint job and presents itself in a very well-maintained visual state. The generator and control system were cleaned and technically inspected. The generator's cooling unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent comprehensive EDM testing according to OPS Ingersoll's quality and test standards. The machine is immediately available and ideally suited for reliable production use. Technical Data: - Ingersoll (OPS Ingersoll) - Sinker EDM machine - OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn rapid programming - Powertec Handheld – multifunctional hand control device - Manual EDM with Powertec Handheld - High Speed Jump max. 18 m/min - Generator output: 60 Ampere, EAGLE Powertec - Travel range (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up rotary changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Work table (W x D): 760 x 1000 mm - Load capacity: 2,000 kg Accessories: - CO2 fire suppression system - Integrated cartridge filter system Special Equipment: - Linear measuring system on all axes (standard on Z-axis in this series)

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2013, X ašies eiga: 550 mm, Y ašies eiga: 850 mm, Z ašies eigos atstumas: 450 mm, ruošinio svoris (maks.): 2 000 kg, stalo plotis: 760 mm, atstumo iki veleno lentelė: 585 mm, stalo ilgis: 1 000 mm, ruošinio ilgis (maks.): 1 095 mm, ruošinio plotis (maks.): 795 mm, ruošinio aukštis (maks.): 480 mm, bendras svoris: 6 800 kg, paskutinio kapitalinio remonto metai: 2025, stalo apkrova: 2 000 kg, greitasis eiga Z ašyje: 18 m/min, Įranga: dokumentacija / vadovas, OPS INGERSOLL GANTRY EAGLE 800 Refurbished Year of manufacture: 2013 EAGLE Powertec PC/NC control 3060 22" display with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control device Manual EDM with Powertec Handheld EAGLE Powertec - Finish Generator PT 60, 60 Ampere High Speed Jump max. 18,000 mm/min. Hjdpfxeyi Uais Ab Seni Travel ranges (X, Y, Z): 550 x 850 x 450 mm Distance table/electrode holder min. 135 mm / max. 585 mm Electrode changer 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Worktable (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Head load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS, Hirschmann or System 3R (per customer request) ECOTEC energy saving function standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, X ašies eiga: 1 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 650 mm, stalo plotis: 1 140 mm, stalo ilgis: 1 640 mm, ruošinio ilgis (maks.): 1 770 mm, ruošinio plotis (maks.): 1 270 mm, ruošinio aukštis (maks.): 680 mm, padavimo greitis Z ašis: 12 m/min, stalo apkrova: 7 500 kg, Condition: completely overhauled Control: Mitsubishi - 64 bit CNC Generator capacity: 70 Amps - multipulse Hedpfx Abeyh A Nao Ssni Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-fold pick-up disc changer Work tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Equipment: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Būklė: naudotas, X ašies eiga: 800 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 400 mm, ruošinio svoris (maks.): 4 000 kg, stalo plotis: 700 mm, stalo ilgis: 1 100 mm, Talpa: 120 A – 19 kVA X ašis: 800 mm Y ašis: 600 mm Z ašis: 400 mm Hnjdoyg Hpdspfx Ab Sji Stalo matmenys: 1.100 x 700 mm Atstumas tarp galvos ir stalo: 950 mm (maks.) Alyvos rezervuaras: 1.700 x 1.000 x 650 mm Detalės svoris: 4.000 kg (maks.) Valdymas: CNC Datic S120

Būklė: geras (naudotas), Gamybos metai: 1998, CNC panardomosios erozijos staklės Gamintojas: INGERSOLL HANSEN Tipas: GRANTRY 1000 Metai: 1998 Hnodpfet Dbaksx Ab Sei Valdymas: MITSUBISHI 64 Bit CNC multipuse Generatorius: 70 A Eigos: X 700 mm, Y 1350 mm, Z 500 mm Darbinis rezervuaras: 1000 mm x 1600 mm x 550 mm Maksimali stalo apkrova: 3000 kg Aušinimo sistema, dokumentacija yra, duomenų saugojimas yra Priedai: Hirschmann įrankių laikiklis.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 650 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 450 mm, ruošinio svoris (maks.): 1 000 kg, garantijos trukmė: 12 mėnesiai, Precision and stability thanks to robust construction. The static, dynamic, and rigid mechanical design ensures consistently stable operation with high performance. Linear glass scales on the X, Y, and Z axes provide precise position detection and minimize measurement errors. Compact and rigid mechanical concept. The short C-frame design combined with generously dimensioned cast components guarantees mechanical stability and precision throughout the machine’s entire service life. Thanks to its high robustness, the design absorbs all machining forces, ensuring a consistently accurate spark gap between the workpiece and the electrode. Key features at a glance: - Manual eroding for spark erosion via hand control with joystick function - High vibration damping due to stable cast iron construction - Highest removal rates and accuracy with all material combinations - Wear-resistant finish dimension tuning - Fully encapsulated integrated measuring systems - Fully integrated work area illumination - Automatic central lubrication Technical specifications: Height: approx. 2660 mm Width: approx. 2780 mm Depth: approx. 3050 mm Weight without fluids: approx. 3900 kg Table (L x W): 1000 x 600 mm Hodpfx Abeyh Ngxe Ssni Dielectric above table: 450 mm Dielectric filters: 4 cartridge filters Workpiece weight: max. 1000 kg Travel range X-Y: 650 x 450 mm Travel range Z: 450 mm Resolution X-Y-Z: 0.001 mm Electrode weight: max. 50 kg Dielectric capacity: 1200 l Required cooling capacity: 4.5 kW Air flow rate: 10 l/min Required air pressure: min. 6 bar Electrode changer: 6-position

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 400 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 350 mm, ruošinio svoris (maks.): 700 kg, garantijos trukmė: 12 mėnesiai, Precision & stability through robust construction. The static, dynamic, and rigid mechanical design ensures long-term operational stability with high performance. Linear glass scales in X, Y, and Z axes enable exact position detection and minimize measurement errors. Compact & rigid mechanical concept. The short C-design in combination with generously dimensioned cast components guarantees mechanical stability and precision throughout the entire service life of the machine. Thanks to its high robustness, the construction absorbs all machining forces, ensuring a consistently precise spark gap between workpiece and electrode. Key features at a glance: - Manual eroding for spark initiation via hand control with joystick function - High vibration damping thanks to sturdy cast-iron construction - Maximum removal rate and accuracy across all material pairings Hnedpfx Aboyh Nf Uj Sji - Low-wear final dimension tuning - Fully enclosed integrated measuring systems - Fully integrated work area lighting - Automatic central lubrication Height: approx. 2400 mm Width: approx. 2410 mm Depth: approx. 2270 mm Weight without fluids: approx. 2800 kg Table: Length x Width: 700 x 400 mm Dielectric above table: 350 mm Dielectric filters: 3 cartridge filters Workpiece weight: max. 700 kg Travel path X-Y: 400 x 300 mm Travel path Z: 350 mm Resolution X-Y-Z: 0.001 mm Electrode weight: max. 50 kg Dielectric requirement: 450 l Required cooling capacity: 4.5 kW Air flow rate: 10 l/min Required air pressure: min. 6 bar Electrode changer: 4-position

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2003, X ašies eiga: 1500 mm Hsdpfsxwma Aox Ab Ssni Y ašies eiga: 750 mm Z ašies eiga: 500 mm Darbinio stalo aukštis: 820 mm Laisvas tarpas: 920 mm Maksimalus ruošinio svoris: 100 000 N Maksimali apkrova galvutei: 4 000 N Vandens vonia: fiksuota Vandens vonios matmenys: 2300 x 1300 x 700 mm Darbinis stalas: 1700 x 1000 mm Naudingoji dielektriko aukštis: 620 mm Generatorius Minimali standartinė šiurkštumas: VDI=0 Galia: 60 A Pilnos komplektacijos įranga: • 120 A ekspertinis generatorius • Fiksuotas stalas 1700x1000 mm • CNC sinchroniniam ašių valdymui • Integruota ONA C ašis su automatiniu System 3R Macro Standard tvirtinimu • Ekologinis filtras su automatiniu valymo ciklu • Dielektriko temperatūros termokontrolė Pagaminimo metai: 2003

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 000 mm, Y ašies eiga: 1 510 mm, Z ašies eigos atstumas: 650 mm, ruošinio svoris (maks.): 7 500 kg, bendras aukštis: 3 900 mm, bendras plotis: 2 950 mm, bendras ilgis: 3 430 mm, Įranga: dokumentacija / vadovas, For sale: OPS Ingersoll Gantry 1200 EDM machine, year of manufacture 2004, fully overhauled in 2016. Hsdpfx Aevwa Nbeb Seni The machine was operating flawlessly until recently and is in very good condition. On-site inspection is possible; however, please note that the machine is currently not connected to power.

Būklė: naudotas, Gamybos metai: 1998, Elektroerozijos staklės OPS INGERSOL Gantry 1000 multipulse, Nr. 571692, pagaminta 1998 m., darbo sritis 1.200 x 1.000 x 700 mm, su įvairiais pagalbiniais agregatais, aušinimo agregatas/pompa pakeisti 2025 m. Hnodpfxsyhqnto Ab Sji

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, X ašies eiga: 1 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 650 mm, stalo plotis: 1 140 mm, stalo ilgis: 1 640 mm, ruošinio ilgis (maks.): 1 770 mm, ruošinio plotis (maks.): 1 270 mm, ruošinio aukštis (maks.): 680 mm, padavimo greitis Z ašis: 12 m/min, stalo apkrova: 7 500 kg, Condition: completely overhauled Control: Mitsubishi - 64 bit CNC Generator capacity: 70 Amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-fold pick-up disc changer Hedpfx Aox Ryzvsb Soni Work tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Equipment: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2006, veikimo valandos: 985 h, X ašies eiga: 905 mm, Y ašies eiga: 705 mm, Z ašies eigos atstumas: 455 mm, ruošinio svoris (maks.): 3 000 kg, EDM314MF30 - SLM (antraeilis naudotas įrenginys) Visiškas atnaujinimas (retrofit) 2026 m. Judėjimo eiga X x Y x Z: 900x705x455 mm Stalo matmenys: 1150x850 mm Rezervuaro dydis: 1200x900 mm Atstumas nuo stalo iki tvirtinimo įtaiso: 260/710 mm Elektrodų svoris: 50/500 kg Maksimalus ruošinio svoris: 3000 kg Bendrieji įrenginio matmenys: 2210x3450x3250 mm Energijos tiekimas: 400V/DS/50/60Hz Rezervuaro aukštis: 750 mm Įranga: Hnedpfx Aehfaizjb Sji Pilnai nauja elektros instaliacija Nauja valdymo spinta Naujas generatorius Nauja valdymo sistema Vartotojo sąsaja MF30 Judesio valdymo pultas Lietimui jautrus ekranas Atsitraukimo greitis 15000 mm/min (Highjump) Erozijos generatorius 60A Integruotas aušinimo įrenginys Kasetinis filtravimo įrenginys Įrankių keitiklis 8/20/30 vietų C ašis su tiesioginiu matavimu, skiriamoji geba 0,0001° C ašis pozicionavimui, sukimui ir erodavimo funkcijai C ašis 100 aps./min Automatinis rezervuaro pozicijos reguliavimas Nauja užpildymo, filtravimo ir skalavimo pompa Transportas Paleidimas Apmokymai 12 mėn. garantija

Būklė: naudotas, Gamybos metai: 2002, veikimo valandos: 42 610 h, X ašies eiga: 900 mm, Y ašies eiga: 680 mm, Z ašies eigos atstumas: 405 mm, stalo plotis: 850 mm, Stalo dydis X: 1200 mm Stalo dydis Y: 850 mm maks. ruošinio svoris: 3000 kg Hnodpfxox Up Efe Ab Soi Elektrodų keitiklis: 16 kartų Veleno laikiklis: EROWA

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, X ašies eiga: 1 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 650 mm, stalo plotis: 1 140 mm, stalo ilgis: 1 640 mm, ruošinio ilgis (maks.): 1 770 mm, ruošinio plotis (maks.): 1 270 mm, ruošinio aukštis (maks.): 680 mm, padavimo greitis Z ašis: 12 m/min, stalo apkrova: 7 500 kg, Condition: completely overhauled Control: Mitsubishi - 64 bit CNC Generator capacity: 70 Amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-fold pick-up disc changer Hnjdpfxjxpvhas Ab Sei Work tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Equipment: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 575650, X ašies eiga: 550 mm, Y ašies eiga: 850 mm, Z ašies eigos atstumas: 450 mm, TECHNICAL DETAILS Hjdpfx Aow T Thmsb Ssni Version: Tank with lifting function Internal dimensions (W x D x H): 800 x 1100 x 480 mm Programmable/automatic dielectric fluid height: max. 450 mm WORKING HEAD At ram clamping system UPC/H8000/Dynafix: 150 kg Min. distance electrode clamping system to worktable: 135 mm Max. distance electrode clamping system to worktable: 585 mm INTEGRATED C-AXIS Adjustable rotational speed: 1 - 20 rpm Measuring resolution: 0.001 degree Load capacity (manual electrode change): 50 kg Load capacity (automatic electrode change): 15 kg Holding/clamping torque: 120 Nm Max. moment of inertia of electrode: 0.4 kgm² WORKTABLE Support surface (W x D): 760 x 1000 mm Load capacity: 2,000 kg TRAVEL PATHS X / Y / Z (within working tank): 550 x 850 x 450 mm Y (for electrode change and loading position): 1180 mm CONTROL PC-NC dialogue: 2 x 32 bit Drive type: digital AC servo motors Max. travel speed X, Y, Z: 5,000 mm/min High speed jump max.: 18,000 mm/min MACHINE DETAILS Main voltage: 400 V / 50 Hz Control voltage: 24 VDC Maximum fuse: 32 A Power consumption: 19 kVA Machine weight: 6,400 kg Main dimensions (W x H x D) with generator: 2760 x 2730 x 2940 mm Space required with generator: 9 m² Generator weight: 640 kg Operating hours: 3,221 h

Būklė: naudotas, Gamybos metai: 2001, veikimo valandos: 35 973 h, Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: 5.3049, X ašies eiga: 825 mm, Y ašies eiga: 680 mm, Z ašies eigos atstumas: 405 mm, ruošinio svoris (maks.): 2 500 kg, bendras aukštis: 2 760 mm, bendras plotis: 1 500 mm, bendras ilgis: 2 200 mm, stalo plotis: 850 mm, stalo ilgis: 1 200 mm, ruošinio ilgis (maks.): 1 150 mm, ruošinio plotis (maks.): 800 mm, valdymo spintos ilgis: 600 mm, valdymo spintos plotis: 920 mm, valdymo spintos aukštis: 1 960 mm, įėjimo įtampa: 380 V, bendras svoris: 4 500 kg, bakelio talpa: 900 l, Įranga: dokumentacija / vadovas, Zimmer & Kreim ZK 1200 – Die Sinker EDM Machine (used, dismantled) For sale is a used sinker EDM machine Zimmer & Kreim ZK 1200. The machine was fully operational until its dismantling and is currently stored in a dismantled state. The included electrode changer is defective. Also included in the scope of delivery are a Kraft & Bauer CO₂ fire suppression system and a chiller. Technical data Machine: Dimensions (H x W x D): 2760 x 1500 x 2200 mm Weight: 4500 kg (without dielectric) Worktable: Table size: 1200 x 850 mm Dielectric above table: 410 mm Max. workpiece weight: 3000 kg T-slots: 4 x 12 mm Distance table–ram (max./min.): 650 / 235 mm Machining head: Travel (X/Y/Z): 900 / 680 / 415 mm Resolution X–Y–Z: 0.001 mm Resolution C: 0.001° Hnedpsxrcpcofx Ab Soi Rapid traverse speed: 2000 mm/min Electrode weight without rotation: 100 kg Electrode weight with rotation: 15 kg Dielectric supply: Capacity: 800 liters Paper cartridge filters: 4 pcs Generator (rollable): Dimensions (H x W x D): 1960 x 600 x 920 mm Weight: 300 kg Rated current: 60 Amp Connected load: 15 kVA Also included: CO₂ fire suppression system by Kraft & Bauer Chiller Condition Used, well-maintained Machine is dismantled Electrode changer defective Machine was running until dismantling Machine must be loaded and collected in 49393 Lohne.

Būklė: naudotas, Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 7 500 mm, Y ašies eiga: 3 100 mm, Z ašies eigos atstumas: 1 000 mm, stalo plotis: 2 000 mm, stalo ilgis: 7 000 mm, bendras svoris: 180 000 kg, paskutinio kapitalinio remonto metai: 2016, Table: 7020 x 1810 mm (Please note portal width: 2250 mm) Travel paths: X = 7387 mm, Y = 3070 mm, Z = from support to max. height without tool 920 mm + W axis 1000 mm Control: Heidenhain iTNC 530 Hedpfxewx Nlts Ab Seni Simultaneous operation: X, Y, Z axes yes; A, B, C axes with 1° Hirth coupling Spindle type: SK50 / geared spindle Four angle heads included Internal spindle cooling: Yes Operating hours: 95,475 h Spindle hours: 37,984 h Modernization carried out: 2003 (new control and drives)

Būklė: naudotas, Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 576409, OPS INGERSOLL GANTRY EAGLE 1200 Baujahr: 2017 Standardausstattung 1.01 Eagle Powertec PC/NC * Multiprog Powertec Technologie Programmierung am PC/NC und als CD (externer Programmierplatz) * Powertec Easy Burn Hochgeschwindigkeitsprogrammierung * Powertec Handheld – multifunktionales Handbediengerät Hjdpewu Hb Rsfx Ab Seni * Manuelles Erodieren mit Powertec Handheld * Schnittstellen: Ethernet und USB * Multikontrollleuchte (Fernwartung über Internet), kostenlos während der Garantiezeit 1.02 Eagle Powertec Feinbearbeitungsgenerator PT60 1.03 Eagle Power Jump mit 18 m/min Hubgeschwindigkeit in der Z-Achse 1.04 Programmgesteuerte Druckspülung, Sauganschluss manuell 1.05 Filtereinheit, 32 m² Papierfilter 1.06 Kompressorkühler 1.07 CO₂-Löschanlage 1.08 Lackierung: Strukturlack in Kobaltblau (RAL 5013), Grau (RAL 7045), Gelb (RAL 1021) 1.09 Maschinenschuhe Technische Daten Verfahrwege XYZ: 1.000 × 1.500 × 700 mm Tankgröße: 1.270 × 1.770 × 680 mm Aufspanntisch: 1.140 × 1.640 mm Tischbelastung: 7.500 kg Max. Kopflast: 300 kg Eilgang: 5.000 mm/min Z-Hub High-Speed: 18.000 mm/min (18 m/min) CNC-Steuerung: Dual 32-Bit PC, Touchscreen, USB/Ethernet Generator (PT60): Adaptive Stromregelung, 60 A Dielektrikummenge & Filter: 2.400 l, 32 m² Filter Maschinenabmessungen & Gewicht: 2.950 × 3.950 × 3.440 mm, ca. 12.000 kg