Įpurškimo liejimo mašina

Engel DUO 5550/1100

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, ENGEL DUO 5550/1100 Injection Moulding Machine Year of manufacture: 2011 Injection Unit - Two short-design cylinders for material injection. - Direct screw drive; ceramic heaters on cylinders. - Standard screw geometry L/D = 22. - Hardened and nitrided screw, diameter Ø 90 mm. - Maximum injection volume: 2,740 cm³. - Maximum shot weight (PS): 2,520 g. - Open nozzle: front radius R = 35 mm, channel diameter Ø 6 mm, mounting thread M55×3. - Increased specific injection pressure: 2,180 bar. - Plasticizing rate: 85 g/s (for polystyrene, screw Ø 90 mm). Csdpfsw U Taxjx Ag Iohb Injection unit equipment: - Cylinder type M3 – bimetallic, enhanced corrosion and wear resistance, allowable temperature up to 350°C. - Screw type S4V – heat-treated, chromed, with armored edges, increased resistance to corrosion and wear. - Special screw geometry G11.3 optimized for process requirements. - Non-return valve R12 (multi-ball, recommended for PC, PMMA, ABS). Clamping Unit (Clamping System) - Hydromechanical two-platen clamping system. - Four short high-pressure cylinders on the nozzle side. - Four tie-bar tensioners on the ejector side. - Two diagonal-mounted fast-stroke cylinders in the clamping system. - Mold opening stroke adapted to mold height (dynamic stroke adjustment). - Moving platen guided on the machine frame – ensures rigidity and platen parallelism. - Clamping force: 11,000 kN. - Mold mounting platen dimensions: 1,850 × 1,810 mm. - Tie bar clearance: 1,400 × 1,150 mm. - Mold height: 600–1,200 mm. - Maximum opening stroke: 1,800 mm. - Mold cooling system: 10 water circuits with rotameters (max. 30 l/min each). - Special execution of platens with additional holes for two ejector systems (horizontal and vertical). Core Drive Systems (Core Pullers) - Independent hydraulic core drives in the mold: 2 units on the moving platen, 2 units on the fixed platen. - Hydraulic pressure reduction circuits for cores. - Independent pneumatic core drive on both the moving and fixed platens. Hydraulics - Pump station with electrohydraulically regulated pressure and flow pumps, and fixed displacement pumps. - Energy-saving proportional hydraulics with precise control of flows and pressures. - Servo valve for injection speed, hold pressure, and back pressure control. - ECODRIVE system – energy-saving hydraulic drive enabling parallel auxiliary movements with minimal energy consumption. ENGEL Viper 40 Robot - Integrated Cartesian robot, operated from CC200/RC200 controller. - Three servodriven axes: X = 700 mm (extendable to 900 mm), Y = 1,000 mm (tandem to 1,900 mm), Z = 1,880 mm (extendable to 5,720 mm). - Payload up to 17 kg, accuracy ±0.05 mm. - Axis C: rotating gripper 0–90°, pneumatic drive. - Axis B: head rotation around lifting axis (Y), servo motor drive, range +90° / –180°.

Būklė: naudotas, Plieninė konstrukcija kranų įrenginiui Plotis: apie 8,5 m Ilgis: apie 7,95 m Įrenginys išmontuotas Įrenginys parduodamas „toks, koks yra“ Apžiūra: Kviečiame apžiūrėti prekę – tiesiog susisiekite su mumis ir susitarkite dėl apžiūros laiko. Cedpfxebruzgs Ag Iohb Dėmesio: garantija netaikoma, keitimas neleidžiamas, grąžinti negalima.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection unit – 5550 Screw diameter: 90 mm Specific injection pressure: 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with hardened edges – high wear and corrosion resistance Clamping unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Pneumatic cores: 1+1 Heating zones GK: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed software: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 X axis: 1,300 mm Y axis: 1,800 mm Z axis: up to 2,840 mm C axis: rotary movement 0–90° 2 vacuum circuits Codpsw U Sz Iefx Ag Iohb 1 pressure circuit for sprue pick-up

Gamybos metai: 2014, būklė: paruoštas naudoti (naudotas), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Chodsh Nypfspfx Ag Iob

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2010, veikimo valandos: 23 905 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 600 kN, varžto skersmuo: 35 mm, darbinio tūrio: 135 cm³, įpurškimo slėgis: 2 221 juosta, atvērimo eiga: 335 mm, bendras ilgis: 2 420 mm, bendras plotis: 1 700 mm, bendras aukštis: 3 100 mm, bendras svoris: 6 700 kg, Įranga: dokumentacija / vadovas, Parduodama tvarkinga ENGEL INSERT 200V/60 liejimo mašina su tik 23 905 darbo valandomis. Mašina buvo naudojama tik pavyzdžiams gaminti. Apžiūra prijungus prie elektros galima bet kada! Techniniai duomenys pagal nuotraukas! Mašina iš karto prieinama! Codpfsy Iwlaox Ag Ishb

Būklė: naudotas, Machine designation: Dry Bulk Feeder Manufacturer: K-Tron / Coperion GmbH Model: K-ML-FB-130QC Year of manufacture: Unknown Speed: Mixer speed: 5.6 rpm Capacity: 75 liters Drive Motor: 0.25 kW – mixer drive 0.25 kW Dimensions: Length 800 mm x Width 700 mm x Height 1200 mm Unladen weight: 100 kg Technical documentation: No Remarks: Mixer drive 0.25 kW, speed 5.6 rpm Condition: Used Price: On request Chedpfx Ajiv Ic Esg Ieb

Būklė: naudotas, Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: X82600, spaudimo jėga: 12 000 kN, varžto skersmuo: 150 mm, tarpas tarp stulpų: 1 200 mm, darbinio tūrio: 12 193 cm³, įpurškimo slėgis: 1 500 juosta, injekcijos svoris: 11 584 g, atvērimo eiga: 1 400 mm, Used Stork IMM 12000-19000 injection moulding machine. Chedpswhkfyofx Ag Ieb

Būklė: reikia remonto (naudotas), Liejimo įpurškimo staklės, Engel ES 330/85, naudota įranga Csdpfx Aeukn S Heg Iehb Kaip matyti nuotraukose, darbo būklė yra neaiški. Bendri matmenys: 3100 x 1950 x 2600 mm Svoris: 5500 kg Gamintojas: Engel Tipas: ES 330/85 Pagaminimo metai: 1997 Elektros duomenys: 380V, 60 A Valdymo plokštės: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Engel ES 80/20 HL Clamping force: 20 tons Year of manufacture: 1999 Screw diameter: 22 mm Shot volume: 38 cm³ Chedpfxolq Hyqj Ag Iob Enlarged platen size: 550 x 430 mm

Būklė: naujas, Gamybos metai: 2022, spaudimo jėga: 15 t, C-Frame Press – Manufacturer Hidrobrasil – 15 t C-Press – Table 400 × 400 mm For sale is a hydraulic C-frame (single column) press from Hidrobrasil with a pressing force of up to 15 t. This machine is engineered for continuous, multi-shift operation and is ideally suited for assembly, pressing-in, and light forming tasks in workshops and production environments. ==== Technical Data & Information: Hydraulic Single Column Press – 15 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single Column Press / C-Frame Press - Design: C-Frame / Single Column Press - Pressing Force: max. 15 t (150 kN) - Adjustable Pressure Range: 5 – 17 t - Machine Weight: approx. 1.1 t - Dimensions (L × W × H): approx. 1,150 × 800 × 1,900 mm - Table Height: 850 mm - Operator Sides: 1 ==== Working Area - Max. Opening Width: 400 mm - Stroke: 350 mm ==== Table & Ram - Table Plate: 400 × 400 mm - Ram Plate: 200 × 200 mm - Features: with T-slots and central cylinder clamping ==== Speeds - Approach Speed: 10 mm/s - Return Speed: up to 25 mm/s - Pressing Speed: 0 – 10 mm/s ==== Hydraulics - Number of Cylinders: 1 - Operating Pressure: max. 290 bar - Pressure Accuracy: ± 5 bar - Pump: Gear pump, approx. 9 l/min - Oil Volume: approx. 80 l (HLP 46) - Oil Temperature: max. 55 °C - Ambient Temperature: max. 40 °C ==== Drive & Electrical Equipment - Motor Power: 3 kW - Total Connected Load: approx. 5 kW - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz ==== Equipment & Operation - Pressure adjustment via rotary control - Manual operation lever with two speeds - Oil temperature indicator - Control cabinet supply: 3,000 mm cable with 16 A plug - Machine body powder-coated / double painted ==== Control Cabinet - Protection Class: IP54 - Spare Space: approx. 20 % - Cooling: no - Internal Lighting: no - Operating mode switch: lockable Chjdpfeitylgox Ag Ijb ==== Design & Safety - Constructed as an oil-hydraulic single column press - Meets current accident prevention and EU directives ===== Assembly work, press-fit assembly, small batch production, workshop applications, light forming technology Single column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, die-setting press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Moreover, our presses exceed both Canadian and European safety standards, as they comply fully with Brazil’s national safety directive NR 12, which is based on these standards. Our key strengths are custom machine building and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. For the hydraulics, we predominantly use components from leading European manufacturers.