Dažymui skirtos roletų juostos

CM

Būklė: naujas, bendras ilgis: 5 000 mm, bendras plotis: 4 250 mm, 21.25 m² Mezzanine Storage Platform, Top Edge 300 cm, 500 kg/m² load capacity, immediately available from stock, suitable for pallet jacks, modular platform system, steel mezzanine, storage level Specifications: - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Additional flooring overhang: 200 mm - Supports, cross braces & tie rods powder-coated in RAL 7016 - Main & secondary beams galvanized - Flooring: 38 mm chipboard P6, top natural & bottom white - Brand new, in stock in Wietmarschen - IMMEDIATELY AVAILABLE The storage platform consists of: - 04 x supports - 02 x main beams C+350 - 06 x secondary beams S+260 - 01 x cross bracing - 02 x tie rods - 10 x chipboard panels - Includes connecting materials & bolts -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: Hsdpfxjy A N Rwo Af Dsff €2,590.00 net €3,082.10 gross You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged via our partner shipping company on request. Costs are based on postal code. Assembly: Our trained staff are available to assist you with the professional assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements… We’re happy to support your projects from planning and ordering through to installation. Interested or have questions? Simply contact us by message or phone. Our phone number is on our company page. ☎️ You can reach us by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we’ll call you back as soon as possible.

Būklė: naudotas, Clamping Plate – Table of a Long Planer Machine – Table Width / Clamping Width: 1,845 mm Table Length / Clamping Length: 5,505 mm 7 longitudinal T-slots for T-slot nuts: M30 Hfsdpfxebn Amfs Af Dsf T-slot pitch: 263 mm Overall Length: 6,230 mm Total Plate Height: 350 mm Weight: 11 t

Būklė: naujas, Gamybos metai: 2022, Cantilever Racking NEW STOCK Specifications: - Height: approx. 350 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle distance: 131 cm - NEW STOCK, immediately available from stock. Hedpfxey A N H Ss Af Djff - 500 kg load capacity per arm - 2,250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: base + 3 storage levels (total 4 storage levels) Rack includes: - 4 x uprights incl. base, approx. 350 cm made from IPE160 - 12 x cantilever arms, approx. 120 cm made from IPE 80 - incl. all necessary connecting elements and bolts Why BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All stated load capacities for uprights and cantilever arms are statically proven at 100% load. - All rack systems are supplied hot-dip galvanized, suitable for both indoor and outdoor use, and do not rust like painted systems – ensuring consistent appearance for many years. - We use the legally required hot-dip galvanized bolt sets according to DIN EN 15048-1 - Long purchase guarantee - Upright base and upright rear are welded together for additional safety and reduced assembly times, as the bases do not need to be bolted separately to the uprights. - Bracing made of angle steel, so no adjustment using turnbuckles is necessary, which reduces assembly time. - No slotted hole system, thus no weakening of the upright profile. Price: €2,356.00 net + legally applicable VAT. You will receive an invoice with VAT shown separately. Transport: Delivery is available upon request via our partner freight forwarder, costs are dependent on postal code. Assembly: Our trained personnel are happy to assist you with professional assembly and disassembly of your facility if required. Our recommendation: Let us know your requirements... We are happy to assist you with your projects – from planning to ordering to installation.

Būklė: naujas, Gamybos metai: 2020, Cantilever Racking NEW Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Centre distance: 131 cm - NEW - immediately available from stock. - 750 kg load per arm - 2250 kg load per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: Base + 3 storage levels (4 storage levels in total) Rack consists of: - 04 x uprights, incl. base approx. 300 cm made from IPE160 - 12 x cantilever arms approx. 120 cm made from IPE 100 - Incl. all necessary connecting elements and bolts Why choose BLT Cantilever Racking? Hfsdpfx Ajy A N Hfof Dof - Certified German manufacturer in accordance with DIN EN 1090 - Made in Germany - All specified load capacities of uprights and arms are statically verifiable at 100% capacity - All racks supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use without rusting unlike painted racks. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets according to DIN EN 15048-1 - Long-term post-purchase guarantee - The upright base and upright rear are welded together, providing added safety and fast installation since the feet do not need to be bolted to the rear - Bracing made from angle steel, so no adjustment via turnbuckles is necessary. This reduces installation time. - No slotted hole system, preventing weakening of the upright profile Price: €2,404.00 net + applicable VAT. You will receive an invoice with VAT shown. Accessories such as floor anchors, collision protection, etc. are also available from us. Transport: Delivery available through our partner shipping company on request; cost depends on postcode. Assembly: Our trained staff are happy to professionally assemble and dismantle your equipment if required. Our recommendation: Tell us your requirements ... We are happy to assist you with your project, from planning and ordering to installation.

Gamybos metai: 1999, būklė: naudotas, KAPAZITÄT 2000 kg HUBHÖHE 4,7 m & 5 m ARM-LÄNGE 3,2 m Hjdpfx Ajwa I A Tof Doff 2 STÜCK

Būklė: naujas, Gamybos metai: 2020, Cantilever Rack – NEW STOCK Hodpfxjy A N Ehj Af Djff Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Pitch: 131 cm - NEW STOCK, available immediately from stock. - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: base + 3 storage levels (4 storage levels) Rack includes: - 04 x uprights incl. base, approx. 416 cm, made from IPE160 - 12 x cantilever arms, approx. 120 cm, made from IPE80 - Includes all necessary connecting elements and bolts Why choose BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically certified at 100% capacity - All racks are supplied with hot-dip galvanized finish; suitable for indoor and outdoor use, will not rust like powder-coated systems, maintaining appearance for many years - We use legally required hot-dip galvanized bolt sets in accordance with DIN EN 15048-1 - Long-term replacement parts warranty - Upright foot and upright back are welded together for added safety and reduced assembly time (no need to bolt foot to upright back) - Bracing made of angle steel, eliminating the need for adjustable tension rods and reducing assembly time - No slotted holes, so upright profiles are not weakened Price: €2,578.00 net + statutory VAT You will receive an invoice with VAT shown separately Accessories such as floor anchors, collision protection, etc. are also available Transport: Delivery available nationwide via our partner freight forwarder, costs depend on postal code Assembly: Our trained personnel will professionally assist with assembly and disassembly of your facility if required Our recommendation: Tell us about your requirements… We are happy to assist in realizing your projects – from planning to ordering to installation

Būklė: naujas, Gamybos metai: 2022, Cantilever Racking NEW STOCK Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK available immediately from stock. - Load capacity per arm: 500 kg - Load capacity per upright: 2250 kg - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms height-adjustable in 100 mm increments - Levels: base + 3 storage levels (4 storage levels total) Racking consists of: - 04 x uprights, incl. base, approx. 300 cm made of IPE 160 - 12 x cantilever arms, approx. 120 cm, made of IPE 80 - Incl. all necessary connecting elements and bolts Why choose BLT Cantilever Racking? - Certified German manufacturer DIN EN 1090 - Made in Germany - All stated load capacities for uprights and arms are statically verified at 100% load - All racking systems supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use, will not rust like painted systems. Consistent appearance for many years - We use legally required hot-dip galvanized bolt assemblies according to DIN EN 15048-1 - Long-term aftersales guarantee - Upright foot and upright back are factory welded together, offering additional safety and shorter installation times, as they do not require separate bolting - Bracing made from angle steel; no tension rods required, reducing installation time - No slotted hole system, thus no weakening of upright profiles Price: €2,265.00 net plus applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged via our partner haulier on request. Costs depend on your postal code. Assembly: Our trained personnel are available to assist with professional installation and dismantling of your warehouse equipment as required. Hodpfx Afey A N D Re Doff Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning to ordering and assembly.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, įėjimo srovė: 238 A, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Hsdpfxsvf E Ave Af Deff Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: naujas, Gamybos metai: 2022, Cantilever Rack NEW STOCK Specifications: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Center distance: 131 cm - NEW STOCK available immediately from stock. - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 200 mm increments - Levels: Base + 3 storage levels (4 storage levels total) The rack consists of: - 04 x uprights, incl. base approx. 400 cm from IPE160 - 12 x cantilever arms approx. 120 cm from IPE 80 - incl. all necessary connecting elements and bolts Why choose BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 – Made in Germany - All specified load capacities of uprights and cantilever arms are statically verified at 100% load. - All racking systems are supplied in hot-dip galvanized finish. They are suitable for both indoor and outdoor use and do not rust like painted systems, ensuring a consistent appearance for many years. - We use the legally required hot-dip galvanized bolt assemblies according to DIN EN 15048-1 - Long-term availability of spare parts - The base and back of the upright are welded together, providing additional safety and shorter installation times since the base does not require additional bolting to the upright back. - Bracings made of angle steel; thus, no adjustment with turnbuckles is necessary. This significantly reduces assembly time. Hfodpfx Afey A N A Ts Djf - No slotted hole system, which means no weakening of the upright profile. Price: €2,462.00 net + statutory VAT. You will receive an invoice with VAT shown separately. Transport: Delivery by our partner freight forwarder on request. Costs depend on postal code. Installation: Our trained personnel are available to assist you with professional assembly and disassembly of your facility if required. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects, from planning and ordering to installation.

Būklė: naujas, keliamoji galia vienai konsolės svirčiai: 650 kg, lentynos aukštis: 4 000 mm, bendras ilgis: 4 000 mm, bendras plotis: 1 480 mm, apkrova vienai atramai: 1 950 kg, Data: - Height: approx. 400 cm - Depth: approx. 148 cm - Length: approx. 400 cm - Cantilever arms: approx. 120 cm, including 8 cm front stop - Axle spacing: 130 cm - BRAND NEW, available immediately from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights painted RAL7016. - Cantilever arms painted RAL3000. - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels in total) The uprights included in this racking set are pre-fabricated free of charge for possible conversion to double-sided use. Advantages of hook-in cantilever arms, see illustrations. Racking consists of: - 04 x uprights, including foot section, approx. 400 cm, made from IPE180. - 12 x cantilever arms, approx. 120 cm, made from 10 x 4 cm profile. - Includes all necessary connecting parts and bolts. Price: €1,995.00 net Hfsdoy A H U Hepfx Af Dsf €2,374.05 gross You will receive an invoice showing VAT. Accessories such as floor anchors, impact protection, etc. are also available from us. Transport: Delivery can be arranged by our partner forwarding agent upon request. Shipping costs depend on the delivery postcode. Assembly: Our trained personnel are happy to assist you with the professional assembly and disassembly of your industrial equipment if required. Our recommendation: Let us know your requirements! We are happy to support you in realising your projects, from planning and ordering, right through to installation.

Gamybos metai: 2004, būklė: geras (naudotas),

Būklė: naujas, Gamybos metai: 2020, Cantilever Racking NEW STOCK Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Arm length: approx. 120 cm - Bay width: 131 cm - NEW STOCK, available immediately from our warehouse. - 750 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized. - Cantilever arms hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels in total) Racking consists of: - 4 x uprights, incl. base, approx. 416 cm, made from IPE160 - 12 x cantilever arms, approx. 120 cm, made from IPE 100 - All necessary connecting elements and bolts included Hfodpfoy A H Uyox Af Dof Why choose BLT cantilever racking? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All stated load capacities for uprights and cantilever arms are statically verified at 100% capacity. - All racking systems are supplied in hot-dip galvanized finish, suitable for indoor and outdoor use, with long-term corrosion protection, unlike painted systems. Consistent appearance for many years. - We use legally required hot-dip galvanized screw sets according to DIN EN 15048-1 - Extended spare parts availability guarantee - Base and rear of upright welded together for added safety and reduced assembly time, as the base does not require separate bolting. - Bracing made from angle steel, eliminating the need for tension rods and thereby shortening installation time. - No slotted hole system, thus no weakening of the upright profile. Price: €2,631.00 net plus statutory VAT. You will receive an invoice showing the VAT separately. Accessories such as floor anchors, collision protection, etc. can also be purchased from us. Our recommendation: Let us know your requirements... We are happy to assist you with your projects – from planning and ordering to installation. Affordable delivery available on request.

Būklė: naujas, Approx. 8.4 linear meters, Height: 500 cm, compartment load: 4500 kg. Pallet racks, heavy-duty racks, high-bay racks, industrial racking – racks available immediately from stock. Details: - Height: approx. 500 cm - Depth: approx. 110 cm - Length: approx. 8.4 linear meters - Load capacity: 4500 kg per storage compartment - Uprights galvanized - Beams: 270 x 15 x 5 cm, T45 - Beams in orange - Brand new BLT PR50/101 - Manufactured in Europe & tested according to current standard DIN EN 15512 - 100% quality at the best price Rack includes: - 04 x uprights, approx. 500 cm x 110 cm, disassembled - 18 x beams, approx. 270 x 15 x 5 cm, T45 - 36 x safety pins - Levels: floor + 3 - 36 pallet spaces incl. floor levels - IMMEDIATELY AVAILABLE MULTIPLE TIMES -- Hsdpfey A H Slex Af Deff Price: €1,840.00 net Plus statutory VAT You will receive an invoice with VAT stated Pre-assembly of the frames can be carried out by us for a small additional charge of €12.50/net per unit.

Būklė: labai geros būklės (naudotas), Motor-driven NC rotary table Stepless rotary table (increment 0.001°) Integrated pallet station: pallet changer table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Overall height: 660 mm Centering bore: 100 H6 mm T-slots: 7 units Hfsdpfx Ajfk R Tdjf Dof Slot dimensions: 22 H7 mm Slot spacing: 160 mm Position measurement via ROD 250 rotary encoder. Condition: Very good (used) Optional: with machine base (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, as well as CNC control upgrades. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - Control system upgrades

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, The used Stow pallet racking system is a high-quality heavy-duty rack for industrial storage – offering approximately 100 linear meters in length and 7 meters in height. It is ideal for logistics, warehouses, and craft businesses requiring maximum storage capacity in minimal space. Manufactured in Europe, this racking system stands for stability, quality, and durability. Available immediately from stock – perfect for companies with a high turnover of goods. Customizable to your requirements: The rack uprights can be individually modified to your desired height – professionally and precisely in our workshop. Contact us – we offer bespoke solutions for your storage needs. PRODUCT DETAILS: - Height: approx. 700 cm - Depth: approx. 110 cm - Length: approx. 10,000 cm (100 linear meters) - Shelf load: 3,200 kg - Beams: 360 x 14.5 x 5 cm - Beam color: RAL2004 (painted orange) - Uprights: 700 x 110 cm, RAL5015 (painted blue), pre-assembled - Levels: Floor + 3 - Pallet spaces: 432 incl. floor positions - Version: Used Stow product DELIVERY SCOPE: - 28 x uprights (ca. 700 x 110 cm), pre-assembled Hfodpfx Afjy A H R Is Def - 162 x beams (ca. 360 x 14.5 x 5 cm) - 324 x locking pins Price: €9,800.00 net €11,662.00 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner logistics provider – shipping costs depend on postal code - Professional installation and dismantling by trained teams available on request - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly provide you with a non-binding offer tailored to your specific requirements. Whether for new construction, conversion, or expansion – we offer expert advice on your racking configuration. SHOWROOM: Visit our showroom! On site, you can get an in-depth look at our pallet racking, storage racks, and other solutions. Many systems are assembled and ready to experience. Our specialist consultants are on hand to answer your questions and provide individual advice – we look forward to your visit! Not the right solution yet? Visit our website for a quick overview of numerous offers & product variations! INTERESTED OR HAVE QUESTIONS? Contact us easily via message or call. You can find our phone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.