Pasukamos verpstės frezavimo staklės

Casadei F 255 A3 PL

Būklė: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Hjdew Naanopfx Alcsw Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main region and North Rhine-Westphalia). These enquiries will not be answered. Equipment and Technical Data: The Master delivers precision sanding, embodying the essence of our 75 years’ experience in sanding technology. This means it comes equipped—out of the box—with all the features essential for fast and reliable production of perfect surfaces. Nothing more, nothing less. The core Kündig Master model is fitted with a calibration roller and a sanding pad unit. Its proven construction guarantees decades of high-precision sanding, even across the generous working width of 1350 mm. Additionally, there is an integrated control unit for rapid and intuitive operation. Sanding Units – Proven Combination The sanding section uses the tried-and-tested combination of calibration roller and sanding pad. For safe workpiece feed, a parallel-sprung steel pressure roller is located at the machine infeed, while rubber pressure rollers are positioned between the sanding units. Calibration Unit (R): The calibration unit features a grooved rubber contact roller with proven hardness, ideal for calibration tasks and capable of handling high removal rates if required. The contact roller height is continuously adjustable to compensate for the thickness of the applied abrasive. Segmented Sanding Pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad (instead of a pneumatic system), with a sensor width of 35 mm. This allows for even greater precision when fine sanding workpiece edges. The edge pressure of the sanding segments is automatically regulated, but can also be finely adjusted using the touchscreen, allowing targeted sanding of workpiece edges. The graphite glide covering is also quick and easy to change. Summary of Features Construction: In terms of robustness and durability, the Master stands equal to our other model ranges. It features the same heavy-duty build quality that makes all our machines long-term investments, ensuring precise sanding results for many years to come. Upper Section Adjustment: For over 30 years, we have equipped our machines exclusively with upper section adjustment. Why? It is more complex to engineer than table adjustment, but it offers clear advantages: greater weight capacity for workpieces, consistent precision over time, and the benefit of a fixed working height. Workpiece Dimensions: The opening (clearance) adjustment of the upper section is motorized and finely controlled via touchscreen. Maximum workpiece height is 160 mm. With a 1350 mm working width, the Kündig Master provides the generous and proven industry-standard dimension.

Būklė: naujas, Gamybos metai: 2026, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Hjdpfx Aloiidm Necow Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Būklė: dilaminuotas dirbtuvėje (naudotas), Velenų skaičius: 5 vnt. Darbo plotis: 230 mm Obliavimo aukštis: 120 mm Obliavimo stalo ilgis: 2500 mm Padavimo variklis: 4 kW Padavimo greitis: 5–30 m/min Valdymas: atminties funkcija Weinig Powermat 400 su HSK/Powerlock, ašine/radialine CNC valdymu ----- Šiuo metu pas mus atliekamas mašinos paruošimas! Nuotraukos prieš išmontavimą ir šiuo metu vykstančio remonto metu! Trumpa santrauka: ----- - 5 velenai, 8 000 aps./min. - 4 x HSK/Powerlock - Velenų ašiniai ir radialiniai CNC reguliavimai per valdymo pultą - CNC valdomas padavimo reguliavimas ir pozicionavimas - Stalviršiai su kreipiančiuoju peiliu ties 2 ir 3 velenu - Įskaičiuota Weinig/Neumann grąžinimo sistema RF 15 Išsamesnis aprašymas: ----- Techniniai duomenys: Darbo plotis: 20–230 mm Darbo aukštis: 8–120 mm 1. Įrankio laikiklis – apačioje ----- Variklis su stabdžiu: 5,5 kW Veleno skersmuo: 40 mm Apsisukimai: 6 000 aps./min. Įrankio skriejimo skersmuo: 93–145 mm Ašinis reguliavimas: 5 mm Nukreipimo griovelio įtaisas MarathonCoatin stalviršio įdėklas prieš 1 apatinę įrankio tvirtinimo vietą 2. Įrankio laikiklis – PowerLock – dešinėje ----- Variklis su stabdžiu: 7,5 kW Bendras variklis su kairiuoju įrankio laikikliu Apsisukimai su aukštos klasės guoliais: 8 000 aps./min. Įrankio skriejimo skersmuo 40 mm po stalviršiu: 93–200 mm Įrankio skriejimo skersmuo 55 mm po stalviršiu: 93–180 mm Tiesių peilių galvutės maks. skriejimo skersmuo: 163 mm Maks. įrankio skersmuo už stalo ribos: 180 mm Maks. profiliavimo gylis: 35 mm Ašinis reguliavimas: 55 mm Velenas CNC ašies valdymas Stalviršiai su kreipiančiuoju peiliu 3. Įrankio laikiklis – PowerLock – kairėje ----- Variklis su stabdžiu: bendras variklis su antruoju velenu Apsisukimai su aukštos klasės guoliais: 8 000 aps./min. Įrankio skriejimo skersmuo 40 mm po stalviršiu: 93–200 mm Hodpfxjyy A Iqs Alcow Įrankio skriejimo skersmuo 55 mm po stalviršiu: 93–180 mm Tiesių peilių galvutės maks. skriejimo skersmuo: 163 mm Maks. profiliavimo gylis: 35 mm Ašinis reguliavimas: 55 mm Velenas su CNC ašiniu ir radialiniu valdymu Stalviršiai su kreipiančiuoju peiliu 4. Įrankio laikiklis – PowerLock – viršuje ----- Variklis su stabdžiu: 7,5 kW Apsisukimai su aukštos klasės guoliais: 8 000 aps./min. Įrankio skriejimo skersmuo: 93–200 mm Tiesių peilių galvutės maks. skriejimo skersmuo: 180 mm Maks. profiliavimo gylis: 35 mm Ašinis reguliavimas: 40 mm Padalintas spaudimo batelis prieš viršutinę įrankio vietą, reguliuojamas pagal įrankio skriejimą, atitraukiamas nuo įrankio, su spyruokle. Spaudimo batelis prieš viršutinę įrankio vietą ir padavimas po jos, su elektroniniais skaitmeniniais indikatoriais, integruotais į atminties funkciją. Velenas su CNC radialiniu valdymu 5. Įrankio laikiklis – PowerLock – apačioje ----- Variklis su stabdžiu: 7,5 kW Apsisukimai su aukštos klasės guoliais: 8 000 aps./min. Įrankio skriejimo skersmuo: 93–200 mm Maks. profiliavimo gylis: 15 mm Ašinis reguliavimas: 35 mm Padavimo sistema ----- Dažnio reguliuojamas padavimas, sklandžiai reguliuojamas su stabdžiu: 4 kW, 5–30 m/min Įtraukimo volas prieš 1 apatinį įrankį, pneumatiškai valdoma aukštyn/žemyn. Durofer smaigalio dantų volai (Weinig patentas) su gylio ribotuvu ir savaime išsivalančiu...

Būklė: naujas, Gamybos metai: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine tilts via handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Hsdpei Dfidjfx Alcsw Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta switch Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to one side to approx. 25° for sharp angles, and tilted flat to the left up to 30° Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Būklė: naudotas, Formatinė pjovimo staklės SCM 320cm SiX Vežimėlis 320cm, Agregato posvyris į abi puses nuo +45 iki -45 laipsnių, Pjūklo posvyrio ir aukščio reguliavimas motorizuotas, dešinėje pusėje liniuotė reguliuojama elektriškai iki 1500 mm, dvišis priešpjūklis su elektriniu reguliavimu, variklis 7,5 kW, greičiai reguliuojami dažnio keitikliu, maksimalus disko skersmuo 550 mm, vežimėlis gali būti sulenktas kampu, naudota staklė, gera būklė, Įrenginys turi naują neoriginalią valdymo sistemą, Visi reguliavimai veikia. Hedpfx Alozd Uf Tocow

Būklė: naujas, Gamybos metai: 2024, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve perfect foundations. The T 54 was developed with precisely this aim in mind. It enables you to dress workpieces easily at the most modern level and safely machine them with four-sided edges. The machine comes standard with a TERSA all-steel cutterblock. The Xplane cutterblock with a pulling cut is available as an optional extra. Chamfering is effortless thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The solid cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require more support area, both the infeed and outfeed tables can each be extended by 380 mm – of course, these extensions are also made of cast iron. Technical data: Hjdpfx Alepgkmwscew Table width: 500 mm Table length: 2840 mm Max. cutting depth: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorised table adjustment Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock 4 knives Location: In stock at 54634 Bitburg - Available immediately -

Gamybos metai: 2026, būklė: naujas, NEW - - Ideal for removing panels from your vertical panel storage. - For in-house transport of panels to a vertical or horizontal panel saw. - The continuously adjustable support surface can be precisely aligned to the height of your panel saw. - Panels up to max. 250 kg can be transported or swiveled by a single operator. Technical data: Support height - vertical: approx. 120 - 340 mm - horizontal: approx. 890 - 1200 mm Max. panel size: 5200 × 2100 mm Load capacity: 250 kg Location: Available from stock in 54634 Bitburg - immediately available - Shipping within Germany for 90,- Euro net Hjdpfsd Tyaasx Alcsw

Būklė: naujas, Gamybos metai: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, cast-iron milling unit mounted directly to the table Under-table extraction hood for improved dust extraction Solid and precise cast iron table Fast and straightforward speed change Powerful 5.0 kW motor Standard curved milling guard Quality made in Italy Equipment Details Cast iron milling unit Directly mounted onto the milling table Milling spindle mounted with high-precision ball bearings in the upper position for minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors Equipped with a high-performance three-phase motor Milling Guard The standard milling guard is supplied as standard for maximum safety, featuring a height-adjustable fence and protective cover. Milling Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw The integrated extraction port ensures an unobstructed view Milling Table Opening A large table opening allows the use of larger panel cutters, tenoning, and slotting tools above and below the table Curved Milling Guard Included as standard Reversible Fence Jaws Versatile, integrated fence to bridge the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and Weight Weight (net) approx. 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation Information Required length: 1,945 mm Machine body width/depth: 575 mm Required width/depth: 920 mm Working area length: 1,600 mm Explanation required space: The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Explanation working area: Please add the specified dimensions to the required space to calculate the recommended free setup area for the machine. Electrical Data Supply voltage: 400 V Drive motor power: 5.0 kW Mains frequency: 50 Hz Milling Spindle Usable spindle length: 100 mm Spindle speeds: 3,500/7,000/10,000 rpm Max. spindle protrusion above table: 130 mm Spindle shaft diameter: 30 mm Max. milling tool diameter Max. sinkable tool diameter: 180 mm Hjdpfx Ajhp Rcrslcew SCOPE OF DELIVERY Curved milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, minimax ti 55es LL – Spindle Moulder Image shows T 55 i elite s standard version Professional workshop machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension grey cast iron milling unit, tiltable up to -45° to the rear. Spindle speeds displayed via LEDs. Quick and easy speed change via eccentric clamping. Reversible direction of rotation (right/left). Height and tilt display accurate to 1/10 mm. Heavy-duty industrial fence: with rack-and-pinion fine adjustment, digital display, aluminium fence jaws, 3-position repeat setting for quick adjustment. Scope of delivery: Aluminium fence jaws Curved milling protection hood Table extensions left and right Model: minimax ti 55es LL Article No.: 5502252 Hodedqzh Repfx Alcjw Technical data: Worktable dimensions: 2500 x 655 mm Sliding table dimensions: — Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Hedpfx Asqlckpolcow Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -