Gręžimo centras

BIESSE BIESSE SKIPPER V31

Sąlyga: labai geros būklės (naudotas), Line for door frames (casings), for cutting, milling of strike plates, and inserting hinges (ANUBA) comprising: X10030A) Discharge conveyor X10030B) Transfer unit Bodsqwycljpfx Aahswi X10030C) Double cutting and drilling machine "AMS" - 45° left-side cut – Drilling - 90° cut - 45° right-side cut – Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" model MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" model Teknomat 3000

Sąlyga: geras (naudotas), Gamybos metai: 2007, mašinos/transporto priemonės numeris: 94323, X ašies eiga: 3 060 mm, Y ašies eiga: 1 260 mm, Z ašies eigos atstumas: 150 mm, bendras aukštis: 2 400 mm, bendras ilgis: 4 400 mm, bendras plotis: 2 800 mm, bendras svoris: 3 130 kg, For sale: CNC MACHINING CENTER IN CONTINUOUS OPERATION Biesse ROVER 3.03 CNC Machining Center Bwjdpfx Aowpthtoahoi Fully operational, available for inspection in Wadowice. X-axis travel: 3060 mm Y-axis travel: 1260 mm Z-axis travel: 150 mm CNC control type: XP 600

Sąlyga: naujas, Gamybos metai: 2022, Exhibition machine Year of manufacture: 2022 Equipment and technical data: Base machine 7402 with Pin-Jet dowel insertion function Handheld control device 2D barcode scanner UPS (uninterruptible power supply) Quattro HSK package incl. 4-position tool changer XL drilling head Double drilling spindle in Y-axis Bjdswt E Tvepfx Aahowi automatic central lubrication Location: Hochheim Availability: approx. week 32/2022

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool diameter 93-125 mm) Working height: 100 - 200 mm (with tool diameter 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Bjdperq Ebfofx Aahswi Right spindle: 1 Left spindle: 1 Top spindles: 2 Spindle arrangement: b-r-l-t-t-b Maximum spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Chamfering unit included Separate motor for each spindle Electronic feed with brake, infinitely variable 5-40 m/min Durofer spike-tooth feed rollers Short infeed table, 1.2 m long, with 2 powered rollers above the table Machine table surface with hard coating Manual lubricant pump WEINIG Comfort Set Control system: WEINIG MEMORY PLUS SYSTEM CE mark Declaration of conformity

Sąlyga: naujas, Gamybos metai: 2026, Korpusų tvarkymo sistemų komplektavimas rankinėms, pusiau ar visiškai automatizuotoms korpusų surinkimo linijoms visada atliekamas atsižvelgiant į kliento reikalavimus. Bwjdpfjdx R D Dsx Aahsi Korpusų surinkimo linijų, kurios palengvina darbą, sumažina perstatymo laiką ir padidina gamybos pajėgumą, privalumus mielai paaiškinsime asmeninio pokalbio metu.

Sąlyga: naujas, Gamybos metai: 2023, Order comb, tine shape 15 mm Order combs, tine shape 20 mm Bedpfx Aoiacbpsahewi Finger joint profile Adhesive application comb Glue application comb Glue comb Glue combs >> Delivery time ex stock

Sąlyga: naujas, Typ: SK-1000-P6 Arbeitsbreite: 1000 mm Bsdpfsdmi Niex Aahewi Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: frequenzgeregelt Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtanschlussleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Querwalzenmotor: 1,5 kW × 1 Schraubwalzenmotor: 2,2 kW × 2 Vorschubmotor: 2,2 kW Hubmotor (oben/unten): 0,37 kW × 4 Schenkelschwenkmotor: 0,37 kW × 2 Arbeitstisch-Hub: 0,55 kW Transportabmessungen (L×B×H): 3650×1850×2100 mm Gewicht: 4200 kg

Sąlyga: naudotas, Number of sanding units: 4 pcs. Sanding width: 190 mm Max. sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from top/bottom Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. High-stability premium version with innovative features. Designed for high continuous load even with greater material removal. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from top and bottom 1st sanding unit: heavy steel roller 2nd sanding unit: rubber-coated roller and shoe 3rd finishing unit: fiber brush (see optional equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and longer belt life - Forced pneumatic belt oscillation - Effective dust extraction directly at the sanding rollers - Airborne dust extraction at tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment below via precision lead screw with scale ring (resolution 0.1mm) - Pneumatic belt tensioning with constant tension pressure - Quick belt change with pneumatic belt release in seconds - Adjustable sanding belt tracking during belt changes - Electropneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip and adhesive-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Bjdpfxsvu Hgbo Aahewi Technical Data: - Belt speed: 22 m/s - Belt length: 1,800mm - Belt width: 200mm - Working width: 190mm - Sanding thickness: 2–180mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200mm at 0.37 kW each - Extraction ports: 2 x 180mm, 2 x 120mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with Softdisc 2,740mm): 2,600mm - Length with control panel (with Softdisc 3,035mm): 2,985mm - Width: 880mm - Height: 1,910mm - Approx. weight: 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air blow-off 4-belt via nozzles directly at the radii ...

Sąlyga: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Included: - Option: BARBARIC uniWood comfort control All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: Bwedsu R Szajpfx Aahoi - BARBARIC column-mounted slewing crane Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Mounting: supplied with adhesive anchors for concrete floor. If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. - New exhibition machine -

Sąlyga: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: Bwjdoxraimjpfx Aahei X-axis: 4,300 mm X-axis pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis pendulum operation: 600 mm Y-axis: 1,240 mm Work table: 8 ATS workpiece supports, each with 3 vacuum cups 8 rear workpiece stops, programmable lowering, integrated in each support 8 workpiece stops, mounted 670 mm from the rear in each support 2 + 2 lateral workpiece stops 4 removable center stops 6 pneumatic lifting rails, programmable lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate working zones in X direction Auxiliary vacuum system for clamping templates Chip conveyor integrated into machine table Vacuum pump 90 m³/h Processing head configuration: Mounted on Z2 axis Drilling unit BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in X direction Grooving saw, diameter 120 mm fixed in X direction Grooving saw, diameter 120 mm fixed in Y direction Milling spindle 13.2 kW (11 kW S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Right/left rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the gluing process 16-slot tool magazine Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC-controlled, with 360-degree endless rotation Glue application for hot-melt adhesives Double pressure roller, exchangeable and switchable Heating lamp for preheating the edge material End trimming unit for cutting the edge material at 8 degrees angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results with wood edges with primer of 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. internal radius 18 mm for edges less than 1 mm thickness Min. internal radius 30 mm with edge thickness 2 mm Min. panel size for edge banding 300 x 300 mm Min. size for banding inner cutouts 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine; this configuration restricts pendulum operation. Roll diameter (edge material): 800 mm Safety equipment: * Safety mats in front of the machine * Right-side safety guard with access door No tools included Control: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/trimming and radius milling unit - Combination profile/flat scraping unit - Sawing unit