CNC apdirbimo centras su dygiu įstatymu

Holz-Her Evolution 7402 Pin-Jet

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum power in this class Very quiet Application Area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a matching extraction port diameter Can also be used for several dust sources High-quality, well-conceived construction Robust and compact housing made of galvanized sheet metal Extraction port can be easily converted from left to right, allowing for flexible use Large access openings for maintenance Large, mobile chip containers with clamping lever and chip collection bag Unit delivered fully assembled, ready for immediate use Mobile Filter Description: Ultra-compact with maximum filter surface area Filter media made of polyester fleece, aluminum vapor-coated, washable for extended service life Filters are standard in antistatic design, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning light on control panel The fan is positioned downstream of the filter Equipment Features: With innovative locking device for safe container positioning All units in this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Access opening for cleaning the bypass filter Connection cable 5 m with 5-pin CEE plug and phase inverter 2 fixed casters and 2 swivel casters with brakes Pre-wired for connecting machine recognition for up to 8 machines and slide valve controls Manual filter cleaning Sound pressure damper available as an accessory Model: RLA 125 M Article No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Rated airflow: 1095 m³/h Max. airflow: Negative pressure at rated airflow: Filter surface: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg Ncodpfx Abecnw U Deren

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007361, Darbo sritis X ašis: 3050 mm Darbo sritis Y ašis: 850 mm Pagrindinio veleno galia: 9 kW Nsdpfex A Tibox Abrscn Valdomų ašių skaičius: 3 ašys Gręžimo velenų skaičius: 19 Įrankių vietų skaičius: 3

Sąlyga: naudotas, Gamybos metai: 1975, Technical details: Swing diameter over bed: 400 mm Swing diameter over support: 220 mm Turning length: 1,100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis (longitudinal): 0.08 - 1.10 m/min Feed range y-axis (cross): 0.028 - 0.40 m/min Tailstock quill taper: MK4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Machine dimensions approx. LxWxH: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm by Forkardt with reversible jaws - Multifix tool holder - Coolant system with pump - Chuck guard - Chip tray - Chip guard Ncjdpfx Abeu Ix E Hsron Accessories: - Chuck key - Tool holder - 2 gears

Sąlyga: naudotas, Gamybos metai: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: - Designed for classic nesting machining with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry-type carriage - Helical rack and pinion drive in X and Y axes, ball screw drive in Z axis for precise positioning - Machining dimensions: - Maximum support surface on nesting table: X = 3100 mm, Y = 1560 mm - Maximum travel ranges: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Maximum clearance height DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed - Vector speed: 128 m/min - X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid division - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum zones: single-circuit vacuum system - Drill unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shape arrangement - 5+4 in X and 4 in Y direction - 32 mm grid - Max. drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternate CW/CCW - n(max): 1000 - 4400 rpm, infinitely variable - Mounting: M10 thread, locating seat 11 mm - Without tools, without collets - 6 horizontal spindles: - 2 twin drill spindles in X direction - 1 twin drill spindle in Y direction - Mounting: M10 thread, locating seat 11 mm - Max. drill length: 63 mm from mounting end - Without tools, without collets - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm, infinitely variable - Maximum output at 12000–24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand rising locknut (for right-rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid) - Tool weight max. 6 kg (including holder) - Tools: milling and grinding tools max. Ø 160 mm Ncedpfxewka Upj Abron - Safety guarding in accordance with CE standards - Safety fence at sides and rear - Vacuum pump: 500 m³/h, dry-running - Personnel safety by light barriers in the front machine area - Handheld remote control with the following functions: - Start/stop of machining programs - Machining cycle speed control - Reset button - Manual feed / rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software, 1x machine license including: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication according to defined intervals - Additional sealing against dust via positive pressure in each guide carriage

Sąlyga: geras (naudotas), Gamybos metai: 1988, Weiler lathe Model Condor B 2-axis digital readout Centre height: 165 mm Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle bore: 40 mm Connected load: 3 kW Speed range: 22–2800 rpm Tailstock: Morse taper 3 Coolant pump (not connected) Work lamp Automatic longitudinal and cross feed Spindle brake - Hinged chuck guard - Splash guard Ncjdpfx Abjvgmbvjron Weight approx. 1040 kg 3-jaw chuck Multifix B quick-change toolpost Live centre

Sąlyga: naujas, Gamybos metai: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min/Max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointing unit Corner rounding unit, radius R = 2 mm Ncjdog Tu Rkjpfx Abrjn Quick-change device for corner rounding unit Radius changeover motor EF R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spray Nesting Pneumatic 3-point adjustment Multi-function cutter (R2/R1/chamfer) Equipment for short workpieces

Sąlyga: labai geros būklės (naudotas), TECHNISCHE DATEN NICHT VON DIESER MASCHINE Rücklaufeinrichtung für Kantenanleimmaschine (LINKS) In Kombination mit einer einseitigen Kantenanleimmaschine ermöglicht sie einem einzelnen Bediener die kontinuierliche Beschickung der Maschine. Nodpoff R Tqsfx Abrscn Luftschleierbank, Einlauf und Auslauf (Gesamtabmessungen 3.520 x 2.560 mm) 180°-Transfer (3.120 x 2.140 mm) mit motorisierten Rollenbahnen und motorisierten Bändern Motorisierte Fördermatte (9.080 x 1.560 mm) Werkstückmaße (MIN/MAX): Länge – 240 mm / 2.800 mm Breite – 120 mm / 1.300 mm Dicke – 8 mm / 60 mm, optional bis 100 mm

Sąlyga: visiškai atnaujintas (naudotas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, equipped with fast automatic handling system. Comprising the following machines: A) LOADING STATION “RBO” Winner C 3200 with dual pick-up and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for panel stack infeed to the loader. B) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° Njdpfx Abjdfgg Iorjcn G) UNLOADING STATION “RBO” Winner SC 3200 with dual pick-up, double stacking station, and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for outfeed of panel stacks from the unloader.

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (with sliding carriage) No. 1 motorized carriage with horizontal metal arms External roller conveyor (at floor level) for feeding the stack of panels to the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fence with safety mats Operating capacity (cycles / min) approx. 16 Nodpefi Tg Hsfx Abrocn Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Sąlyga: labai geros būklės (naudotas), 3-axis (X-Y-Z) CNC machining center – Cantilever design Movable horizontal plate (workpiece), static machining head Control system (BiesseWorks software), with separate electrical and control panels Machining head safety enclosure, safety tread mats Infeed table (workpiece support) at entry No. 2 workpiece clamping vices positioned within the working area Outfeed table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm 3000 x 1300 x 60 (approx.) Total connected load (kW) 24 Ncedpfx Ajwb Allsbrjn WORKING UNITS (TOP): Independent vertical drilling spindles: 29 pcs. Independent horizontal drilling spindles: 10 pcs. (8 X + 2 Y) Grooving saw unit (for X-axis machining), diameter 160 mm (1 pc. x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (1 pc. x approx. 4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles: 29 pcs. Independent horizontal drilling spindles: 10 pcs. (8 X + 2 Y) Grooving saw unit (for X-axis machining), diameter 160 mm (1 pc. x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (1 pc. x approx. 4.5 kW)