Rąstinių namų frezavimo staklės Auertech

Auertech BL100A

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Log House Milling Machine BL100A, fully overhauled with factory warranty For log thickness up to 140mm, construction height up to 200mm, and processing length up to 9.0m • Infeed table (timing belt cross conveyor) and entry table for timber length 9m • Log house milling machine BL100A – four-spindle milling unit with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-sections approx. 140x220mm Kjdpfx Agsxxhwlehodw • HM reversible insert tools included for wall thickness approx. 40–100mm • End groove milling unit 3.0kW with cutter B = 21–40mm • Drilling device with drill guide and drill bit D = 20mm • Integrated under-table cross-cut saw 4.0kW, saw blade D = 500mm • Pneumatic workpiece clamping with horizontal clamping jaws • Outfeed table 9m with push-off device and material storage table 6x1.5m • Servo slider positioning system with IPC control and IITO Control Software • Label printer for component identification, laser printer for printing production lists • Excellent condition, factory-refurbished & general serviced, with parts warranty, in ready-to-operate condition • Price & delivery time upon request. Subject to prior sale and all rights reserved

Sąlyga: geras (naudotas), Gamybos metai: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating principle Processing of timber for chalet construction / log house production. Beams can be processed in a single pass. • Cross-cutting • Horizontal and vertical milling of notches/grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Rugged welded steel construction. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, hardened and ground guides for maximum processing accuracy. Carriage guided by dust-protected, preloaded ball bearing guide rollers. Working range up to 200 x 250 mm. Fully operational, with contactor control system; motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for customer-provided chip extraction system; includes 2 eccentric clamps; no milling tools (rebate cutter). Features electro-hydropneumatic horizontal and vertical feed, synchronized with the start of the milling motors. Rapid traverse and feed rate steplessly adjustable. Fully wired and installed, including air service unit. Beams thicker than 14 cm must be processed in two passes; for these beams, the workpiece must be fed again to the extent of the excess thickness for further milling. Machine guards over all moving parts with gas spring counterbalance. Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog scale display Max. saw blade Ø / bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (uni-directional) Adjustable riving knife Motor speed min⁻¹: 2900 Power (kW): 2.2 2. CM milling unit (log house unit): Hydropneumatic feed Spindle adjustment with digital scale display Horizontal milling unit: Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter width >60 mm only use aluminum alloy cutters with indexable inserts. 2 x hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed; rapid traverse and working feed rate steplessly adjustable. 3. Drilling unit: Manual feed Spindle adjustment with analog scale display Drill chuck: ER 25 collet Max. clamp Ø: 16 mm Max. drill Ø: 32 mm Motor speed min⁻¹: 1450, Power (kW): 1.8 4. End milling unit: Hydropneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor min⁻¹/2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics Required operating pressure min/max. MPa (bar): 0.7/1 (7/10) Air consumption: 8 Nm3/h Electrics Operating voltage V/Hz: 380 V, 50 Hz Rated power: 8.8 – 15.8 kW depending on configuration Customer-supplied fuse: 3 x 25 A (slow-blow) Max. simultaneous power demand: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Total height, guard lowered: 1600 mm Total height, guard raised: 2200 mm Extraction port Ø (under-floor extraction) Kdsdpfxeu Uh T Ds Aghjw Weight: approx. 1300 kg Including roller conveyor 2 x 6 m (2 x 4 m) Technical data subject to change!

Gamybos metai: 2002, Sąlyga: beveik kaip naujas (naudotas), L x W x H: approx. 12.1 x 3.0 x 3.25 m Volume: 55 cbm Kdedpfx Asllvpzoghow Conveying capacity: approx. 150 m³/h 6 dosing/discharge screws – driven in pairs, each with 11 kW Weight: approx. 15 t Was in operation at an RDF (Refuse Derived Fuel) plant

Sąlyga: geras (naudotas), Morsoe mitre guillotine, machine number 48706, in good condition, immediately available. Kdodsh Aka Iopfx Aghjw If you are interested, we are also happy to inform you about other machines available at our facility. You are welcome to inspect the machine at our premises by prior appointment.

Sąlyga: beveik kaip naujas (naudotas), 1500 m² Schäfer R3000 Mezzanine, 3-Storey Used, excellent condition, like new – see photos Ground floor: steel-constructed mezzanine; two additional levels: Schäfer shelving system Manufacturer: SCHÄFER R3000 CAD design and assembly 3-storey construction Partial sale possible Price: on request! Item is in stock. Transport and installation available on request. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. (Subject to changes, errors in technical data, details and prices as well as prior sale! See our T&Cs, all prices excl. VAT ex works) Purchase / Sale We are constantly looking for or offering a wide range of items from various sectors. - Swept-clean business clearances - Liquidations - Fast – flexible – efficient! We also clear and/or dispose for insolvency administrators. Contact us with a few keywords and we will get back to you promptly. To visit our website, please click on our logo! Ksdpshzw Hisfx Aghodw

Sąlyga: naujas, Gamybos metai: 2025, Pilnai automatinis vidutinių–didelių aliuminio profilių pjovimas su paprasta naudoti automatizacija. Tiesiog padėkite bet kurį aliuminio profilį – įrenginys jį automatiškai atpažins ir supjaustys pagal užduotis, naudodamas didelio tikslumo servovariklį medžiagos padėčiai nustatyti. Pjovimo užduočių sąrašus galima lengvai įkelti per „Excel“ per WIFI, greitam ir paprastam didelių sąrašų įvedimui. Kiekvieno dedamo pjauti aliuminio ruošinio ilgį, nesvarbu, koks jis, išmatuos lazerinis jutiklis. Galingas optimizavimo algoritmas operacijos metu apskaičiuoja geriausią dalių pjovimo eilę, kad būtų kuo mažiau atliekų. Įrenginys pats automatiškai supjausto visą apskaičiuotą sąrašą be sustojimų. Jokių papildomų jūsų įvesčių nereikia – tiesiog vis dėkite naujus aliuminio profilius. Paprasta, didelės spartos alternatyva dvigubagalviams pjūklams. Tiesiog įveskite arba importuokite reikiamus ilgius ir kampus bei paspauskite START. Įrenginys nuolat gamina kampuotas detales, tiksliai ir dideliu greičiu. • Pilnai automatinis darbas: profilių padavimas ir pjovimas pagal ilgį. • Paprasta naudotojo sąsaja; užduotį įvedate ir pradedate pjauti per kelias sekundes. • Supaprastintas detalių, partijų ar didelių „Excel“ sąrašų pjovimas. • Grupinis (daugiajuostis) kelių profilių vienu metu pjovimas ir skaičiavimas. • Nuotolinis „Excel“ užduočių sąrašų įkėlimas per WIFI su plačiomis duomenų susiejimo galimybėmis. • Visiškai reguliuojami pjūklo ir padavimo greičiai optimaliai našumui. • Automatinis optimizavimo režimas su lazeriniu profilio ilgio matavimu ir minimalia atliekų kiekių optimizacija (pasirinktinai). • Automatinis etikečių spausdinimas ant detalių pagal užduočių sąrašą (rankinis etikečių klijavimas, pasirenkama). • Tiesioginis ženklinimas ant profilio gamybos eigoje, be operatoriaus veiksmų (pasirinktinai). • Brūkšninių arba QR kodų spausdinimas arba nuskaitymas užduotims įvesti (pasirinktinai). • Automatinis servo pavaros valdomas pjūklo posūkio iki ±75° kampu nustatymas (pasirinktinai). Puikiai tinka: • Langų ir durų gamybai • Kampuotų aliuminio konstrukcijų gamybai • Aliuminio konstrukcijų gamybai • Kompozitinių konstrukcijų gamybai • Žaliuzių, užuolaidų ir baldų gamybai • Aliuminio profilių prekybai Modelis: A550 Ilgis: 9 m Išilginis blokas: ProfiStop Alpha Medžiagos ilgis: 8580 mm Stūmimo galia: 20–40 kg Programinė įranga: Optimiser Kedpfxef Eknno Aghsdw AUKŠČIAUSIOS KOKYBĖS AUSTRALIŠKOS GAMYBOS ĮRANGAI.

Sąlyga: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, pjovimo plotis (maks.): 625 mm, Hundegger joinery machine with automation 5 axes Kjdpfx Agov Ubtcjhjdw Working width: 625 mm with tools

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2003, Complete plant with primary impact crusher, feed opening 2320x1700 mm. Mobile. Production capacity: 800 t/h, output size 0-40 mm, suitable for limestone. Secondary stage includes two Laron Lau 8 hammer mills, feed opening 1620x700 mm. Kdsdpfxelwya Ne Aghjw

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2004, HYDRAULIC THICKNESS CLAMP FOR GLUING WOODEN ELEMENTS HSKG Category: VI - Hydraulic presses for gluing wooden components The HSKG device is designed for gluing wooden elements cut to thickness under high pressure applied by hydraulic cylinders. The achievable pressing force per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing process is performed in a stack with the loading field dimensions. Stack formation is carried out by hydraulic pressing between movable vertical beams and vertical slats of the cross cylinders. Both stack forming elements are fitted with wooden or metal inserts matching the profile of the stack of slats. Gluing wooden elements by thickness enhances frame quality, reduces machining costs, and minimizes wood waste. Technical and operational data (standard HSKG - 6m version): - Number of loading fields: 4 pcs - Dimensions of a single loading field: - Loading height: 1140 mm - Length of slats in one field: 1530 mm - Maximum slat width: 150 mm - Maximum length of glued elements: 3120 mm - Installed power: 3 kW - Electrical supply: 3/N/PE, 400V 50Hz - Control voltage: 24V DC - Number of cylinders per field: - Ø 50x100 mm – 3 pcs - Ø 80x100 mm – 3 pcs - Overall dimensions (L x W x H): 8120 x 1000 x 2300 mm Ksdotrl R Aopfx Aghedw - Machine weight: 4800 kg On customer request, we can provide other configurations of pressing cylinder control, depending on the required length of glued elements, as well as various lengths of individual working fields in different quantities within the press assembly. The maximum working width can be increased up to 220 mm with enhanced pressing force.

Sąlyga: naudotas, Gamybos metai: 2021, Number of spindles: 5 pcs Kdodpfx Agewgwmnjhsw Working width: 250 mm Planing height: 160 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control: K2 Basic 7" Touch KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm, spindle 4,500 – 8,000 rpm - Width and height motorized positioning: left spindle radial top spindle axial - Feed beam motorized positioning - Further motorized positioning: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125–163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (with tool diameter up to 163 mm): 10 – 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm The machining of the workpieces depends on the following operating parameters: Material, wood moisture, tools, chip removal diameter, and feed speed. Adjustments to the operating parameters may be necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with frequency inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 125–160 mm Rabbet cutter: diameter difference 20–25 mm to the planing head Important: Machine cannot be operated without a jointer rabbet cutter Suction port D = 125 mm Tool clamping system: Quick-clamping nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with frequency inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with frequency inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with frequency inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatically and dynamically adjustable via linear guides Standard profile depth: 20 mm Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with f...