Įpurškimo liejimo mašina

Arburg 520S inkl. Multilift 520 S 1600 290/70 2K

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Tsdpfxsuiy Hro Alweb Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036721, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 1 110 mm, darbinio tūrio: 1 078 cm³, įpurškimo slėgis: 1 877 juosta, injekcijos svoris: 981 g, atvērimo eiga: 3 200 mm, plokštės aukštis: 1 540 mm, pavaros tipas: Hydraulisch, laisvas tarpatramis: 3 200 mm, įrankio svoris: 2 200 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you here our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe perfectly absorbs forces and extends the lifetime of the moulds. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and highly stable in value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT colour display with multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Max. mould open force kN 455 - Tie bar spacing (h x v) mm 1110 x 960 - Platen size (h x v) mm 1540 x 1440 - Mould installation height min.-max. mm 1550 (without center platen) - Daylight mm 3200 - Max. opening stroke mm 1650 - Max. mould weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter/type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight max. stroke PS g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticising rate g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter/type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight max. stroke PS g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticising rate g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL SPECIFICATIONS - Connected load kW 341 - Power supply V / Hz 400 / 50 3 phases with neutral conductor Tsdow U N Ixjpfx Alwsb WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mould heating 96-fold (3.5 kW) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical center platen - Parallel clamping and opening movement during injection process with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface—signal interface for connecting an RPM system - Electrical interface for HRS Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our factory in Parsdorf and is available at short notice. Additional options available upon request. We look forward to your enquiry.

Būklė: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 2007, Funkcionalumas: neveikiantis, For sale is an injection molding machine by Netstal, model Synergy 1000-230. Todpfxjrfbnme Alwob Due to a transport accident, the control cabinet is completely defective. For this reason, the machine is offered as a source of spare parts or for repair. The machine was fully operational and in good condition prior to the incident. Technical data: - Operating pressure: 210 bar - Injection force: 182 kN - Clamping force: 1000 kN - Opening stroke: 0–400 mm - Mold installation height: 450–750 mm - Total weight: 7,200 kg - Operating hours: approx. 53,000 Available from March 2024 Initial hydraulic oil fillings can be ordered from us. On request and for an additional fee, loading and transport (throughout Europe) can be organized. Prices plus VAT. Inspection possible by appointment. Contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase & sale BUYING/SELLING PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for high-quality yet affordable metalworking machinery for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, veikimo valandos: 6 200 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 4 200 kN, varžto skersmuo: 75 mm, Krauss-Maffei KM 420-2000 CX Injection molding machine from Krauss-Maffei with 420 tons of clamping force. Only 6,000 automatic operating hours. Year of manufacture: 2008. MC5 control system. Screw diameter: 75 mm. Extras: 8 hot runner zones. 2 cores on the fixed platen, 2 cores on the moving platen. 1 pneumatic valve on the moving platen. The injection molding machine is delivered RE-Conditioned by the UK Transitus expert technical team. Commissioning at the customer's site can be offered, ensuring proper operation upon installation completion. Technical Details SCREW DIAMETER: 75 mm INJECTION PRESSURE: 1635 BAR INJECTION VOLUME: 1237 cm³ INJECTION WEIGHT: 1126 g Todpfx Alswq D Efowob MAX. DISTANCE BETWEEN PLATENS: 1400 mm MINIMUM MOLD HEIGHT: 380 mm OPENING STROKE: 1020 mm DISTANCE BETWEEN TIE BARS: 900 x 800 mm PLATEN DIMENSIONS: 1270 x 1230 mm SCREW DIAMETER: 75 mm CLAMPING FORCE: 4200 kN YEAR OF MANUFACTURE: 2008 OPERATING HOURS: 6282

Būklė: geras (naudotas), min. szerokość środkowej pryzmy po przecięciu: 55 mm minimalna długość ciętego wałka: 1270 mm maksymalna średnica ciętego wałka: 350 mm średnica wału: 60 mm średnica piły tarczowej: 500 mm płynna regulacja prędkości posuwu przez falownik moc silnika dolnego wrzeciona: 45 kW moc silnika górnego wrzeciona: 37 kW moc silnika posuwu: 1,50 kW Todpfxswmg Sas Alwsb

Būklė: naujas, *TECHNICAL SPECIFICATIONS: Heating capacity (hot circuit): 48 kW Heating capacity (cold circuit): 12 kW Cooling capacity (hot circuit): 42 kW Cooling capacity (cold circuit): 270 kW Medium: Water up to 200°C Maximum external volume: 10 l at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *FEATURE HIGHLIGHTS: - PLC control system with touch screen - Heating via Incolloy stainless steel tubular heaters - Heating control via solid-state relays - IP54 switch cabinet with forced ventilation - Electrical wiring with terminal blocks - Volt-free input for cold/warm switching signal (front door) - Volt-free contact for collective alarm via 3-pole connector (front door) Tsdpfxog Ey Ufe Alwob - Temperature control unit with heating and cooling circuits for connection to a valve station, enabling rapid switching between hot and cold circuits - Temperature-controlled supply of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and circulation system return - Separate automatic filling with dirt strainer - Flow measurement via differential pressure principle in both circuits - Monitoring of heater surface temperature via temperature sensors - System pressure regulation, required compressed air supply: 6 to 8 bar - Pressure booster pump type DS 360 for make-up water supply - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature probe PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This unit complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification describes the standard equipment; customer requests deviating from the standard are specified in offers or order confirmations.

Būklė: geras (naudotas), Gamybos metai: 2008, Ref. No.: 18643 Manufacturer: ARBURG Model: 470 C 1500-400 Golden Edition Year of manufacture: 2008 Clamping Unit Clamping force: 150 tons Opening stroke: 500 mm Tie bar spacing (h x v): 470 x 470 mm Min. mold installation height: 250 mm Daylight (max. opening): 750 mm Injection Unit Screw diameter: 35 mm Shot volume: 154 cm³ Shot weight (PS): 141 g Injection pressure: 2500 bar Dimensions and Weights Dimensions LxWxH: 4.6 x 1.6 x 2.1 m Machine weight: 4850 kg Additional Information & Extras Core pull: 1 unit Todpfsxvy Rljx Alwob Additional Information: Communication card for ProSeS interface available (OPC-UA) Robot interface available (EUROMAP 67) The Golden Edition is a special version of the proven ALLROUNDER C-Series, characterized by optimized hydraulic performance, stable process control, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications with high quality requirements. Typical advantages of this series include: * Sturdy and durable construction * High process stability and repeat accuracy * Reliable ARBURG control system * Good spare parts availability * Ideal for continuous industrial operation The Golden Edition stands out additionally due to its optimized performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is frequently used in areas such as automotive supply, technical plastic components, and series production.

Būklė: geras (naudotas), Gamybos metai: 2004, Pageidavus, už papildomą mokestį galime organizuoti pakrovimą ir transportavimą visoje Europoje. Visos kainos su PVM. Apsilankymas galimas susitarus laiką. Susisiekite su mumis, mūsų komanda mielai Jums padės. Galimas keitimas arba priėmimas dalinai mainais! Telefonas: Mobilus: galima ir per WhatsApp Tedpfjxirqqsx Alwob Svetainė: Įrengimų pirkimas / pardavimas GAMYBINIŲ IR METALO APDIRBIMO STAKLIŲ PIRKIMAS / PARDAVIMAS BEI DAUGIAU. Reikia kokybiškos, bet nebrangios metalo apdirbimo staklės Jūsų gamybai? O gal norite parduoti savo įrenginį? Daugiau informacijos ir kontaktų rasite mūsų svetainėje.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Arburg injection moulding machine from the year 2000. 130 tons clamping force. The machine is delivered fully refurbished at our facility in Heras (Cantabria). New seals have been installed in the clamping unit. We can demonstrate the machine in operation. Technical Details CLAMPING FORCE: 1300 kN PLATEN DIMENSIONS: 660 x 840 mm OPENING STROKE: 575 mm MAXIMUM DISTANCE BETWEEN PLATENS: 800/850 mm TIE BAR DISTANCE: 420 x 420 / 470 x 470 mm SCREW DIAMETER: 50 mm Tedpfsrxtpdsx Alwsb INJECTION VOLUME: 353 cm³ INJECTION WEIGHT: 117 g YEAR OF MANUFACTURE: 2000 INJECTION PRESSURE: 2500 bar

Būklė: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 95 239 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 173937, spaudimo jėga: 2 000 kN, varžto skersmuo: 55 mm, tarpas tarp stulpų: 520 mm, formos aukštis (min.): 250 mm, bendras ilgis: 5 100 mm, bendras plotis: 1 800 mm, bendras aukštis: 2 200 mm, bendras svoris: 6 630 kg, Įranga: dokumentacija / vadovas, The machine was operating flawlessly up until the day before the arrival of the new machine. Therefore, it is in good used condition. The machine is being sold due to lack of space in the injection molding area and is no longer powered. The pump, injection unit, and clamping unit are all leak-free. Tjdpfsv D Nxlox Alwob The machine manual is available, and videos of the machine are available on request. Pump operating hours: 95,239 Automatic operating hours: 86,082 Repairs in recent years: - Filter changed annually - 05/2024: Fan in the control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/backward - 02/2023: New keypad installed. Panel with motor and heating - 12/2022: Ejector sealed. Injection unit sealed, including new piston