Kompaktiška VFFS sistema

AMTEC VFFS-SYS 12-lane 720-G

Būklė: naujas, Gamybos metai: 2025, Automatic Powder Filler and Lid Sealer for Small Containers such as Coffee Capsules. - Suitable for filling powdered products (coffee, coffee blends, drinking chocolate, milk powder, etc.) into various capsule-shaped container sizes/types (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, with/without filter, etc.) and subsequent sealing. Automated filling and dosing using an auger filler. UV sterilization system, ionizer, and dust extraction system for cavity formats included. Automatic foil feed and dual hot-sealing of lids. - Specifications: max. idle speed: 55 cups/minute; filling range: 0-20g; filling accuracy: +/- 0.15g; hopper capacity: 5L (approx. 3kg powder); power supply and consumption: 220V, 1.5kW; required compressed air and flow rate: 6-8 bar, approx. 300L/min; protective gas flow rate: approx. 200L/min; machine dimensions: L1900xW1118xH2524mm; weight: 800kg. Specifications refer to Nespresso capsules; deviations may occur for other capsule brands. Iasdpfov Nkzxox Ab Sop Please note that our new prices are often below typical used equipment prices. Feel free to make an inquiry and let us know your packaging requirements. - We regularly have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. - All machines are sold with full warranty.

Gamybos metai: 2025, būklė: naujas, Complete version of the vertical packaging system with auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packaging powdery products with high or low flowability. The vertical form-fill-seal machine (VFFS) is equipped with the following components: PLC (touchscreen operation monitor, available in various languages such as English, German, etc.), date printer, automatic program setup, mark sensor, quick-change forming set, pneumatic sealing unit, servo motor for film feed, dual feed possible, air separator/extraction device (removes air from the bag before sealing—no vacuum is created), holding fixture for heavy finished bags, euro slot punching device, suitable for OPP and PE film (PE unit available at extra cost, if required). - Specifications of the VFFS packaging machine: - Filling range: up to 5000 ml - Film width: max. 620 mm - Bag size min-max: L(100-400) x W(180-300) mm - Max. idle machine cycle rate: 45 cycles/minute - Stainless steel 304 Isdpfx Ajv Nmk Ajb Sjap - 220 V, 5 kW - 6 bar, 0.3 m³/min - Machine dimensions (L x W x H): approx. 1780 x 1850 x 1950 mm - Weight: 700 kg - Specifications of auger dosing unit: - Filling capacity up to 50 l (hopper) - Filling range: 10-5000 g - Max. idle machine cycle rate: 40 cycles/min - Accuracy: ±0.3~1.5% (depending on product) - 380 V, 3 kW - Dosing unit dimensions (L x W x H): 600 x 1250 x 1200 mm - Weight: 220 kg Screw conveyor for automatic material transport to the dosing unit. The vibration motor ensures even product flow. Feed hopper with up to 150 liters capacity. Size depends on the customer-specific final system. - Specifications: Hopper, conveying length, and angle can be adjusted according to customer/product-specific requirements. Overall dimensions depend accordingly. Conveying length: 3~4 m; stainless steel 304; conveying speed: 3.0 m³/h - 12.0 m³/h; 380 V, 0.8 kW-4.1 kW; weight: 130 kg – 270 kg. Deviations from the stated specifications are possible. Support rod optionally available. The discharge conveyor belt features a stainless steel frame. - Specifications: conveying speed: 30 m/min; 220 V, 0.55 kW; dimensions (L x W x H): approx. 1850 x 550 x 1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L2980 x W3650 x H2600 mm, depending on final configuration. The system must be adapted to customer/product-specific requirements. Therefore, there may be deviations in the specified specifications for the modules and machines. Key components: - Color touchscreen display SIEMENS - PLC controller SIEMENS - Servo motor SIEMENS - Cylinder AIRTAC - Solenoid valve AIRTAC - Relay OMRON - Servo motor for film transport SIEMENS The machine/system is also available in different versions for various packaging sizes and packaging speeds. Please note that our new prices are often lower than the usual prices for used machines. Feel free to make an inquiry and let us know your packaging requirements. Typically, 30-50 different new machines are always immediately available from stock. In addition, we offer very short delivery times starting from approx. 3 weeks for custom-built machines. All machines are available with full warranty.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, ✂️ Flake Foam Cutting Machine – Model BC206 Ideal for manufacturers of sofas, armchairs, mattresses, and cushions, the BC206 flake foam cutting machine is designed to convert foam blocks into flakes of various sizes (from 3 to 50 mm). These flakes can be used as filling material, ensuring optimal comfort and enhanced durability for finished products. ✅ Technical Specifications: Dimensions: 3000 x 1200 x 1100 mm Weight: 1000 kg (robust and stable frame) Production capacity: 350 to 400 kg/h Adjustable cutting size: 3 to 50 mm according to requirements Motor power: 28.9 kW (high-performance and energy-efficient) 📦 Applications: - Manufacture of cushions, poufs, and pillows - Upholstery for sofas, mattresses, and car seats - Production of flakes for foam recycling projects 🛠️ Advantages: - Fast and efficient production: The high cutting capacity enables continuous output, ideal for industries with high demand. - Easy flake size adjustment: The operator can adapt the flake size to meet different market requirements. - Sturdy construction: The machine is engineered for longevity using industrial-grade materials. - Energy saving: The high-efficiency motor consumes less energy while delivering maximum productivity. Ijdpevn T Hnefx Ab Sjap 🌱 Eco-Friendly Solution: This machine also enables the recycling of foam offcuts and their conversion into reusable flakes, thus contributing to the reduction of industrial waste.

Gamybos metai: 2025, būklė: naujas, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design without a platform frame. Suitable for producing pillow bags with back seam, gusset stand-up pouches (gusset tool required) OR pyramid-shaped bags (special sealing unit required). The vertical form-fill-seal machine is equipped with: touchscreen; PLC; photo sensor (print mark recognition) for sealing/cutting position; pneumatic end-sealing unit; servo motor for film draw-off; thermal transfer printer for batch number, date, best-before date. - Multihead weigher specifications: Number of weighing heads: 10; weighing range (per discharge): 2~200g; volume per weighing head: 0.5L; weighing accuracy: X(0.5); discharge gate: single flap; surface finish: smooth (optional dimpled surface); product-contacting parts made of: AISI 304 (optionally AISI 316 at extra cost). - VFFS machine specifications: Max. machine cycle rate (idle): 65 cycles/minute; bag size: L(40-250) x W(50-170)mm (double film draw-off possible for longer bags); suitable film width: 120-360mm; product-contacting parts made of: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 3.7kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.5m³/min; dimensions (LxWxH): 1400*1320*2040mm; weight: 580kg. Iajdpov Nm T Rofx Ab Sop Please note that our new machine prices are often below the typical used machine prices. Simply contact us and tell us about your packaging project. We generally have 30-50 different new machines available immediately from stock. For custom-built machines, we offer very short lead times starting from around 3 weeks. All machines are available with full warranty.

Būklė: naudotas, rida: 54 160 km, galia: 125 kW (169,95 AG), kuro tipas: dyzelinas, kuras: dyzelinas, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, Gamybos metai: 2023, Įranga: ABS, centrinis užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, trauki kontrolė,

Gamybos metai: 2025, būklė: naujas, Vertical packaging machine including dosing unit(s) with 6 production lines for the manufacture of “stick-packs” with center back seal (alternatively: 3- or 4-side sealed – at extra charge) for packing standard liquids (water, vinegar, etc.). PLC and color touchscreen from OMRON, self-diagnostic function. Pneumatic components by AIRTAC, OMRON temperature PID control, electronic components by SCHNEIDER and OMRON. Film feed with AB converter control, stainless steel version (SS304), piston pump with 60-liter hopper. - Specifications: max. idle machine cycle rate: 6x60 cycles/min; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-68)mm; power supply: 220V, 4.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1600xW1400xH1900mm; weight: 550kg. The machine/system is also available in further versions for various packaging sizes and speeds. Please note that our new prices are often below usual used prices. Feel free to contact us and tell us your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting at approx. 3 weeks. – All machines are supplied with full warranty. Iajdpfx Aov Nmd Njb Sop

Būklė: naujas, Gamybos metai: 2025, Vertical packaging machine including dosing unit(s) with 4 production lines for manufacturing "stick-packs" with a medium back seal (alternatively: 3- or 4-side sealed – at extra cost) for packaging granulates (sugar, salt, etc.). PLC and color touchscreen from OMRON, self-diagnosis. Pneumatic components from AIRTAC, temperature PID control from OMRON, electronic components from SCHNEIDER and OMRON. Film drive, AB converter control, stainless steel version (SS304), oscillating cup filling unit for granulates. - Specifications: max. machine cycle rate in idle: 4x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-100)mm; power supply: 220V, 3.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1500xW1300xH1900mm; weight: 450kg. The machine/system is also available in various models for different packaging sizes and packaging speeds. Please note that our new machine prices are often below typical used machine prices. Simply inquire and let us know your packaging requirements. – Typically, 30-50 different new machines are always available ex stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times of around 3 weeks. – All machines are available with a full warranty. Isdpfsv Nmc Ssx Ab Soap

Būklė: naujas, Gamybos metai: 2025, Vertical packaging machine including dosing unit(s) with 4 production lines for the manufacture of stick packs with center back seal (alternatively: 3- or 4-side sealed – at extra cost) for packing powders (pepper, milk powder, etc.). PLC and color touchscreen by OMRON, self-diagnostics. Pneumatic components from AIRTAC, temperature PID control by OMRON, electronic components from SCHNEIDER and OMRON. Film transport, AB inverter control, stainless steel design (SS304), auger dosing unit with servomotor, including hopper. - Specifications: Accuracy: +/- 0.3-1%; max. machine cycle rate (idle): 4x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-100)mm; power supply: 220V, 3.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1500xW1300xH1900mm; weight: 450kg. The machine/production line is also available in other versions for various packaging sizes and packaging speeds. Iasdsv Nmftopfx Ab Ssp Please note that our new prices are often below typical used machine prices. Feel free to contact us with your packaging requirements. Typically, 30-50 different new machines are available for immediate delivery from stock. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. – All machines are available with full warranty.

Būklė: naujas, Gamybos metai: 2025, Complete version of the vertical packaging system with auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packaging powdery products with high or low flowability. The vertical packaging machine (VFFS) is equipped with the following components: PLC control (touchscreen operation panel, available in various languages such as English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming unit, pneumatic sealing station, servo motor for film feeding, dual transport optional, air extraction device (removes air from the bag before sealing – does not generate a vacuum), holder for heavy finished bags, euro-hole punching station, suitable for OPP and PE film (PE unit may incur extra cost). Specifications of the VFFS packaging machine: filling range up to 3000ml; film width max. 520mm; bag size min-max: L(80-400)xW(80-250)mm; max. idle machine speed: 50 cycles/min; stainless steel 304; 220V, 4kW; 6bar, 0.3m³/min; packaging machine dimensions LxWxH: approx. 1150x1790x1650mm; weight: 600kg. Specifications of the auger dosing unit: filling capacity up to 50l (hopper); dosing range: 10-1000g; max. idle machine speed: 50 cycles/min; accuracy: ±0.3~1.5% (depending on product); 380V, 2.5kW; dosing unit dimensions LxWxH: 690x1030x1100mm; weight: 150kg. Screw conveyor for automatic transport of material to the dosing unit. The vibration motor ensures uniform product flow. Feed hopper with up to 150 liters capacity. Size depends on customer's final system configuration. Specifications: Hopper, conveyor length, and angle can be customized for specific products or customers; actual dimensions depend on final configuration. Conveyor length: 3~4m; stainless steel 304; conveying speed: 3.0m³/h – 12.0m³/h; 380V, 0.8kW-4.1kW; weight: 130kg – 270kg. Variations in the specified technical data are possible. Support pole available as an option. The discharge conveyor belt has a stainless steel frame. Specifications: conveying speed 30m/min; 220V, 0.55kW; dimensions LxWxH: 1850x550x1230mm approx.; weight: 80kg. Total system dimensions: approx. L2350xW3590xH2500mm, depending on final configuration. As a matter of principle, the system must be adapted to the customer’s and product's specific requirements. Therefore, there may be deviations in the specifications of the modules and machines. Main components: SIEMENS color touchscreen display, SIEMENS PLC controller, SIEMENS servo motor, AIRTAC cylinder, AIRTAC solenoid valve, OMRON relay, SIEMENS servo motor for film feeding. The machine/system is also available in other configurations for various packaging sizes and speeds. Iedpsv Nmkvjfx Ab Ssap Please note that our new prices are often below typical used prices. Feel free to inquire and let us know your packaging requirements. – As a rule, 30-50 different new machines are always available from stock for immediate delivery. For custom-built machines, we offer very short lead times from approx. 3 weeks. – All machines are available with full warranty.

Būklė: naujas, Gamybos metai: 2025, Vertical packaging machine including dosing unit(s) with 6 production lines for the manufacture of stick packs with center back seal (alternatively: 3- or 4-side sealed – at extra cost) for the packaging of powders (pepper, milk powder, etc.). PLC and color touchscreen by OMRON, self-diagnosis. Pneumatic components by AIRTAC, temperature PID controller from OMRON, electrical components by SCHNEIDER and OMRON. Film feed, AB converter control, stainless steel design (SS304), auger dosing unit with servo motor and hopper. - Specifications: Accuracy: +/- 0.3-1%; max. machine cycle rate (idle): 6x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; pouch sizes: L(50-350)xW(10-68)mm; power supply: 220V, 4.5kW; compressed air: 1.5m³/min, 6bar. Machine dimensions: L1600xW1400xH1900mm; weight: 550kg. The machine/system is also available in other designs for various packaging sizes and packaging speeds. Please note that our new prices are often below the usual prices for used equipment. Please do not hesitate to contact us with your packaging application. – We generally have 30-50 different new machines available from stock for immediate delivery. In addition, lead times for custom-built machines are usually very short, starting from approx. 3 weeks. – All machines are offered with full warranty. Iaodpev Nmfyjfx Ab Ssp