Compact VFFS System

AMTEC VFFS-SYS 6-lane 360-P

Gamybos metai: 2025, būklė: naujas, Complete version of the vertical packaging system with auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packaging powdery products with high or low flowability. The vertical form-fill-seal machine (VFFS) is equipped with the following components: PLC (touchscreen operation monitor, available in various languages such as English, German, etc.), date printer, automatic program setup, mark sensor, quick-change forming set, pneumatic sealing unit, servo motor for film feed, dual feed possible, air separator/extraction device (removes air from the bag before sealing—no vacuum is created), holding fixture for heavy finished bags, euro slot punching device, suitable for OPP and PE film (PE unit available at extra cost, if required). - Specifications of the VFFS packaging machine: - Filling range: up to 5000 ml - Film width: max. 620 mm - Bag size min-max: L(100-400) x W(180-300) mm - Max. idle machine cycle rate: 45 cycles/minute - Stainless steel 304 - 220 V, 5 kW - 6 bar, 0.3 m³/min - Machine dimensions (L x W x H): approx. 1780 x 1850 x 1950 mm - Weight: 700 kg - Specifications of auger dosing unit: - Filling capacity up to 50 l (hopper) - Filling range: 10-5000 g - Max. idle machine cycle rate: 40 cycles/min - Accuracy: ±0.3~1.5% (depending on product) - 380 V, 3 kW - Dosing unit dimensions (L x W x H): 600 x 1250 x 1200 mm - Weight: 220 kg Screw conveyor for automatic material transport to the dosing unit. The vibration motor ensures even product flow. Feed hopper with up to 150 liters capacity. Size depends on the customer-specific final system. - Specifications: Hopper, conveying length, and angle can be adjusted according to customer/product-specific requirements. Overall dimensions depend accordingly. Conveying length: 3~4 m; stainless steel 304; conveying speed: 3.0 m³/h - 12.0 m³/h; 380 V, 0.8 kW-4.1 kW; weight: 130 kg – 270 kg. Deviations from the stated specifications are possible. Support rod optionally available. The discharge conveyor belt features a stainless steel frame. - Specifications: conveying speed: 30 m/min; 220 V, 0.55 kW; dimensions (L x W x H): approx. 1850 x 550 x 1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L2980 x W3650 x H2600 mm, depending on final configuration. The system must be adapted to customer/product-specific requirements. Therefore, there may be deviations in the specified specifications for the modules and machines. Key components: - Color touchscreen display SIEMENS - PLC controller SIEMENS - Servo motor SIEMENS - Cylinder AIRTAC - Solenoid valve AIRTAC - Relay OMRON - Servo motor for film transport SIEMENS Bwsdpov Nmk Aofx Ai Ejw The machine/system is also available in different versions for various packaging sizes and packaging speeds. Please note that our new prices are often lower than the usual prices for used machines. Feel free to make an inquiry and let us know your packaging requirements. Typically, 30-50 different new machines are always immediately available from stock. In addition, we offer very short delivery times starting from approx. 3 weeks for custom-built machines. All machines are available with full warranty.

Būklė: naujas, Gamybos metai: 2026, Dosing ranges: 1 ml - 38 ml 2 ml – 100 ml 5 ml – 250 ml 20 ml – 680 ml 50 ml – 1,500 ml Volumetric filling Sub-surface filling possible Special “anti-drip” device Adjustable filling nozzle Bodpfx Aswpr Uxsi Eeww Pump and filling nozzle made of stainless steel AISI 316 L Automatic cap application Infinitely adjustable capping torque Capping system for plastic lids Touch display control The products can originate from the food, cosmetics, pet food, oils, chemical, and other sectors (always subject to technical evaluation). The pouches are manually inserted into a special rail feeding system. The machine then transports the empty pouches into the star wheel. There, the pouches are volumetrically filled, the caps are applied automatically, and then closed automatically. The tightening torque is adjustable. The machine is compact and highly versatile in use. Also available as a semi-automatic monoblock.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Parduodame puikios būklės „DURST P5 250 WT“ skaitmeninę spausdinimo mašiną, pagamintą 2022 m. Gamintojas: DURST Modelis: DURST P5 250 WT Pagaminimo metai: 2022 Būklė: Puiki Mašinos tipas: pramoninė, kelių praėjimų skaitmeninė spausdinimo mašina Aprašymas: „DURST P5 250 WT“ – tai naujos kartos skaitmeninė spausdinimo mašina, įrengta „Durst Water Technology“ sistema. Ši sistema leidžia spausdinti naudojant mažai kvapo turinčius arba bekvapus vandens pagrindu pagamintus dažus, todėl ji puikiai tinka pakuočių ir gofruoto kartono reklaminių stendų gamybai. „Durst WT“ dažai nesukelia pavojaus sveikatai ir atitinka griežtus darbo saugos reikalavimus. Sistemoje naudojami recirkuliuojantys „Durst Quadro Array“ spausdinimo galvutės ir „WT“ dažai. Papildoma dažų grąžinimo sistema už spausdinimo galvutės antgalio plokštės užtikrina didelį našumą ir patikimumą. Techniniai duomenys: Medžiaga: įvairios neapdorotos ir apdorotos gofruoto kartono rūšys Lapo dydis: min. A3 (297 × 420 mm) iki maks. 2 500 × 3 200 mm Skiriamoji geba: 1 000 dpi Didžiausias greitis: 345 m²/val. Vidutinis greitis: 200 m²/val. Vidutinis našumas esant 2 440 × 1 220 mm: apie 67 lapai/val. Spausdinimo galvutės: „Durst Quadro Array“ Dažų sistema: „Durst Water Technology“ Spausdinimo dažai: 6 spalvos Komplektacija: „DURST P5 250 WT“ skaitmeninė spausdinimo mašina Padavimo įrenginys Krovimo įrenginys Registracijos stalas Transportavimo padėklas Papildoma informacija: Bwedezwdibepfx Ai Eew Mažai naudota Nėra atidėtų techninės priežiūros darbų dėl galiojančios aptarnavimo sutarties Yra transportavimo padėklas Daugiau informacijos ir techninių detalių suteiksime pagal užklausą. Jei turite klausimų arba norite gauti daugiau informacijos, rašykite mums arba skambinkite.

Būklė: naudotas, Gamybos metai: 2016, Features: Condition: Fully functional, with signs of use Ideal for rapid material transport Professionally dismantled and packed Roller Conveyor Curve 90° Model: Round belt tCondition: Used Year of manufacture: 2016 Manufacturer: AMI Fördertechnik Overall width exterior: approx. 2100 mm Overall width interior: approx. 1130 mm Conveyor width incl. motor: approx. 700 mm Conveyor width without motor: approx. 600 mm Roller pitch/axle pitch: approx. 80/130 mm Frame made of steel Frame height: approx. 125 mm Bsdpopl Uypefx Ai Eeww Frame width: approx. 35 mm Color: light grey Includes SEW motor (0.37 kW) Includes side guide Supports to be ordered separately Stock: 2 units Price per unit The conveyor system was operational until it was dismantled. Thanks to the excellent build quality of this conveyor technology, your material will glide smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics Whether you require roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods—we are your competent partner! We are happy to provide a customized offer or advise you on layout or installation queries. Simply let us know your requirements and on-site conditions. Benefit from our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies in various sectors, such as logistics, pharmaceutical industry, trades, or the electronics industry. Together, we will develop customized concepts to optimize your workflow and material flow in a cost-effective and sustainable way. We can even offer you fully automated sorting technology or supplementary components such as order picking racks or containers.

Būklė: geras (naudotas), J-Tec bag dumping station with filter extraction Fully made of stainless steel Lockable with lid Level sensor included Control cabinet (without wiring) Equipped with pneumatic hopper knocker Optional matching weighing hopper with vacuum filter and double dosing screw (K-Tron) Bwjdpfx Aiowyf Iyj Eew See our other listings

Būklė: naujas, Gamybos metai: 2025, Vertical filling machine for packaging low-viscosity products in flat sachets. Includes liquid dosing unit. - Specifications: max. machine cycle rate (idle): 200 cycles/minute; suitable for volumes of 5-20ml; infinitely variable sachet length adjustment; accuracy: depending on product; max. film width: 30-80mm; sachet size: max. L50-110 x W30-80mm; no compressed air required; power supply: 220V, 1.7kW; stainless steel version (housing: SS201, contact parts: SS304); machine dimensions: L790 x W600 x H1780mm; weight: 350kg; suitable for laminated composite films such as BOPP/PE films and others. Bedpfx Asv Nmywoi Esww The machine/system is also available in other versions for different packaging sizes and packaging speeds. Please note that our new prices are often below the usual prices for used equipment. Feel free to make an inquiry and describe your packaging requirements. - Normally, 30-50 different new machines are available from stock for immediate delivery. For custom-manufactured machines, we offer very short lead times starting from approximately 3 weeks. - All machines are supplied with a full warranty.

Gamybos metai: 2025, būklė: naujas, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design without a platform frame. Suitable for producing pillow bags with back seam, gusset stand-up pouches (gusset tool required) OR pyramid-shaped bags (special sealing unit required). The vertical form-fill-seal machine is equipped with: touchscreen; PLC; photo sensor (print mark recognition) for sealing/cutting position; pneumatic end-sealing unit; servo motor for film draw-off; thermal transfer printer for batch number, date, best-before date. - Multihead weigher specifications: Number of weighing heads: 10; weighing range (per discharge): 2~200g; volume per weighing head: 0.5L; weighing accuracy: X(0.5); discharge gate: single flap; surface finish: smooth (optional dimpled surface); product-contacting parts made of: AISI 304 (optionally AISI 316 at extra cost). Bwedpfx Ajv Nm T Roi Eow - VFFS machine specifications: Max. machine cycle rate (idle): 65 cycles/minute; bag size: L(40-250) x W(50-170)mm (double film draw-off possible for longer bags); suitable film width: 120-360mm; product-contacting parts made of: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 3.7kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.5m³/min; dimensions (LxWxH): 1400*1320*2040mm; weight: 580kg. Please note that our new machine prices are often below the typical used machine prices. Simply contact us and tell us about your packaging project. We generally have 30-50 different new machines available immediately from stock. For custom-built machines, we offer very short lead times starting from around 3 weeks. All machines are available with full warranty.

Būklė: naujas, Gamybos metai: 2025, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design without platform frame. Suitable for the production of pillow bags with back seal, gusseted stand-up pouches (gusset tool required), OR for pyramid-shaped bags (special sealing unit required). The VFFS machine operates in an inclined position to protect easily breakable products such as thin frozen foods or baked goods. The vertical packaging machine is equipped with: touchscreen; PLC; photoelectric sensor (for print mark detection) for sealing/cutting position; pneumatic sealing unit for end sealing; servo motor for film feed; thermal transfer printer for batch number, date, best before date. — Multihead Weigher Specifications: Number of weighing heads: 10; Weighing range (single discharge): 1~60g; Volume per head: 0.3L; Weighing accuracy: X(0.5); Discharge chute: single chute; Surface finish: smooth (optional embossed surface); product-contact parts: AISI 304 (optionally AISI 316 at extra cost). — VFFS Machine Specifications: max. machine cycles in idle: 55 cycles/minute; bag size: L(40–250)xW(50–170)mm, (double film draw for longer bags possible); suitable film width: 120–360mm; product-contact parts: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 3.7kW; required compressed air: 0.4–0.8MPa; air consumption: 0.5m³/min; dimensions (LxWxH): 1866*1316*2158mm; weight: 580kg. Please note that our new machine prices are often lower than typical used prices. Feel free to inquire and let us know your packaging requirements. — We usually have 30–50 different new machines available from stock for immediate delivery. For custom-made machines, we offer very short lead times starting from approx. 3 weeks. — All machines are available with full warranty. Bwjdpfx Aijv Nnaro Eow

Gamybos metai: 2025, būklė: naujas, Vertical packaging machine including dosing unit(s) with 6 production lines for the manufacture of “stick-packs” with center back seal (alternatively: 3- or 4-side sealed – at extra charge) for packing standard liquids (water, vinegar, etc.). PLC and color touchscreen from OMRON, self-diagnostic function. Pneumatic components by AIRTAC, OMRON temperature PID control, electronic components by SCHNEIDER and OMRON. Film feed with AB converter control, stainless steel version (SS304), piston pump with 60-liter hopper. - Specifications: max. idle machine cycle rate: 6x60 cycles/min; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-68)mm; power supply: 220V, 4.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1600xW1400xH1900mm; weight: 550kg. Bwjdpfx Aov Nmd Nei Eew The machine/system is also available in further versions for various packaging sizes and speeds. Please note that our new prices are often below usual used prices. Feel free to contact us and tell us your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting at approx. 3 weeks. – All machines are supplied with full warranty.

Būklė: naujas, Gamybos metai: 2025, Vertical packaging machine for the production of pillow bags with back seam and gusseted stand-up pouches (gusset tooling required). Equipped with: quick-change forming unit; SIEMENS PLC; WEINVIEW touchscreen; photo sensor (print mark detection) for sealing/cutting position; pneumatic end sealing unit; servo motor for film feed; thermal transfer printer for batch number, date, and best before date. - VFFS machine specifications: max. machine cycle rate in idle mode: 70 cycles/min; bag size: L(40-200) x W(30-150)mm; suitable film width: 80-320mm; product-contact parts made of AISI 304 (optionally AISI 316 at additional cost); power supply: 220V, 50/60Hz; power consumption: 3.2kW; required compressed air: 0.7MPa; air consumption: 0.2-0.4m³/min; weight: 310kg. Bwedpfx Aiov Nnb No Esw Please note that our new equipment prices often undercut typical used-equipment prices. Feel free to contact us with your packaging requirements. - We typically have 30-50 different new machines in stock and available for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting from approximately 3 weeks. - All machines are available with a full warranty.