Smulkinimo įrenginiai pirkti naudotą (129)

Sąlyga: geras (naudotas), 📄 Technical data: Kubria F/M 90/S Feature / Parameter Value / Information Application Secondary and tertiary crushing of hard rocks (e.g., granite, basalt, gneiss), ore, limestone, cement raw materials, etc. Crushing principle Cone crusher: material is crushed by compression between a fixed crushing ring and a rotating crushing cone. Cone diameter (lower cone / mantle) 900 mm Maximum feed size up to 150 mm edge length Closed Side Setting (CSS) 8 – 35 mm Hfjdpfxsxzk Urj Abmjr Feed opening (max.) max. 180 mm (feed opening “f”) Final grain / product sizes (depending on setting) e.g., 0–16 mm, 0–22 mm, 0–32 mm Throughput capacity (depending on material / setting) up to approx. 90 t/h (fine), up to approx. 110 t/h (medium), up to approx. 140 t/h (coarse / with larger screen/setting range) Main dimensions (L × W × H) 1,960 mm × 1,550 mm × 2,460 mm Total weight (without drive, electrics, hydraulics, control system) approx. 10 t Drive V-belt drive

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, CONSTMACH SW serijos mobilūs smėlio plovimo ir sijojimo įrenginiai užtikrina maksimalų našumą aikštelėje dėl didelio efektyvumo ir lankstaus panaudojimo galimybių. Šie įrenginiai naudojami natūralaus smėlio ir žvyro plovimui, sijojimui bei rūšiavimui; jų kompaktiškas dizainas leidžia lengvai pastatyti net ir ribotoje erdvėje. Visa įranga sumontuota ant vienos mobilios važiuoklės, todėl sumažinamas montavimo laikas ir supaprastinamas transportavimas. Greitas perkėlimas iš vienos vietos į kitą leidžia įmonėms sutaupyti laiko ir lėšų. SW-1240 Gamybinis našumas: 60 t/val. Sijojimo sieto matmenys: 1 200 x 4 000 mm Spiralinio plovimo matmenys: 400 x 4 000 mm Pildo aukštis: 4 600 mm Bendra variklio galia: 37 kW Elektros generatoriaus galingumas: 75 kVA Svoris: 20 000 kg Transporto matmenys: 15(Ilg.) x 2,8(Plot.) x 4,2(Aukšt.) m SW-1640 Gamybinis našumas: 80 t/val. Sijojimo sieto matmenys: 1 600 x 4 000 mm Spiralinio plovimo matmenys: 500 x 5 000 mm Pildo aukštis: 4 650 mm Bendra variklio galia: 41 kW Elektros generatoriaus galingumas: 85 kVA Svoris: 24 000 kg Transporto matmenys: 15,5(Ilg.) x 3,25(Plot.) x 4,3(Aukšt.) m SW-1850 Gamybinis našumas: 150 t/val. Sijojimo sieto matmenys: 1 800 x 5 000 mm Spiralinio plovimo matmenys: 600 x 6 000 mm Pildo aukštis: 4 700 mm Bendra variklio galia: 50 kW Elektros generatoriaus galingumas: 100 kVA Svoris: 32 000 kg Transporto matmenys: 16(Ilg.) x 3,65(Plot.) x 4,4(Aukšt.) m SW-2060 Gamybinis našumas: 200 t/val. Sijojimo sieto matmenys: 2 000 x 6 000 mm Spiralinio plovimo matmenys: 700 x 7 000 mm Pildo aukštis: 4 750 mm Bendra variklio galia: 55 kW Elektros generatoriaus galingumas: 120 kVA Svoris: 37 000 kg Transporto matmenys: 17(Ilg.) x 3,85(Plot.) x 4,5(Aukšt.) m Kodėl verta rinktis CONSTMACH mobilią smėlio plovimo ir sijojimo augalą? CONSTMACH mobilūs smėlio plovimo ir sijojimo įrenginiai išsiskiria kokybe, patvarumu bei vartotojui draugišku dizainu. Pagaminti pagal Europos standartus, šie įrenginiai pasižymi didele plovimo galia ir nedidelėmis eksploatacijos sąnaudomis. Kiekvienas mūsų gaminamas įrenginys, paremti ilgų inžinerinių metų patirtimi, sukurtas siekiant užtikrinti nepertraukiamą efektyvumą kliento gamyboje. Mobilumas, greitas surinkimas bei didelis efektyvumas suteikia maksimalią lankstumą visų Jūsų projektų metu. Rinkitės CONSTMACH prekės ženklą dėl kokybiškos gamybos, techninės pagalbos ir patikimo aptarnavimo. Ką mes darome Constmach? Constmach – tai viena iš pirmaujančių įmonių, gaminanti įrangą statybos ir kasybos sektoriui, siūlanti platų produktų asortimentą. Mūsų gaminių portfelį sudaro betoninių blokelių gamybos staklės, stacionarios ir mobilios betono gamyklos, akmens trupinimo įranga, akmens trupinimo ir sijojimo linijos, smėlio plovimo mašinos, smėlio gamybos įrenginiai, asfalto gamyklos, transporteriai, žnyplinės trupintuvės bei mobilios trupinimo linijos. Dėl aukštų kokybės standartų, inovatyvių gamybos metodų bei orientacijos į klientą, Constmach išsiskiria kaip patikimas partneris tiek nacionalinėje, tiek tarptautinėje rinkoje. Mūsų įranga profesionalų vertinama dėl patvarumo, efektyvumo ir ilgaamžiškumo. Hodpfsxqgy Njx Abmsfr

Sąlyga: beveik kaip naujas (parodų įrenginys), Demonstration unit with 7 operating hours Another machine available immediately (ex works Neckartailfingen) Shredder MRZ 830 Customs tariff number: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Knives: reversible several times Hydraulically operated pusher Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo clutch Standard features include: - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when rotor is idling - Speed: 70-90 rpm for high throughput - Intermittent control to prevent idle times - Performance-boosting step control for hydraulic pusher - Pertinax guides for hydraulic pusher Hfedpfxjv Sqrpe Abmer - Vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF panels, and other materials subject to testing and approval by the manufacturer. Includes: - Shredder elevated by 30 cm (prepared for conveyor belt installation) Additional shredder options: - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €6,780 net - Control system for conveyor belt and overband magnet + €2,750 net (Start and stop each synchronized with the shredder) Raw material requirements: - The moisture content (oven-dried basis) must be below 30%. - Metals and mineral impurities such as sand, stones, etc. will increase wear.

Sąlyga: naujas, Gamybos metai: 2025, Zestaw szczęk do Metso LT120, QUARRY TOOTH Szczęka stała MM0521203 18%Mn2%Cr - 2120 kg Hedpfxspit Rbs Abmofr Szczęka ruchoma MM0521201 18%Mn2%Cr - 1875 kg Odlewy bardzo dobrej jakości WSZYSTKIE ODLEWY SPRAWDZONE SPECTROMETREM W CELU POTWIERDZENIA NAJLEPSZEJ JAKOŚCI Cena za zestaw EXW Polska, możliwa wysyłka na cały świat

Sąlyga: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, BHS rotacinė smūginė malūnas, pagamintas 2000 m. – naudotas, veikiantis Hfodpsxhgp Sjfx Abmjr

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, veikimo valandos: 4 308 h, Funkcionalumas: visiškai funkcionalus, Presavimo cilindras: 6000 kN Plienas, ketus: 16 t/val. Aliuminis: 6-8 t/val. Pavaros galia: 2x22 kW Montavimo plotas: 7,1x3,3 m Mašinos svoris: 51 t Vieta: Austrija Hjdpfexuqv Nox Abmofr Prieinama iš karto

Sąlyga: beveik kaip naujas (parodų įrenginys), For sale: Retsch rotor mill Condition: As new. The TWISTER rotor mill is specifically designed for sample preparation of foodstuffs (e.g., feed) for NIR analysis. The optimized shape of the rotor and grinding chamber generates an air flow that transports the ground material to the integrated cyclone with a sample bottle. The air flow prevents the sample from heating up, ensuring grinding without moisture loss. The supplied accessories guarantee optimal homogenization, eliminating the need to recalibrate the NIR spectrometer. Three selectable rotor speeds allow the device to be perfectly adapted to application requirements. The mill is quick and easy to clean, as the air flow ensures complete removal of material from the grinding chamber. This is another cyclone mill from RETSCH, ensuring sample preparation of the highest standard and repeatable grinding results for NIR analysis, making the analysis reliable and reproducible. TYPICAL APPLICATIONS Feed, corn, pasta, feedstuffs, pharmaceuticals, rice, soy, tobacco, cereals, ... PRODUCT ADVANTAGES Hodpfx Absrvxqxjmefr - Ideal for grinding feed, cereals, grains, and similar products - 3 adjustable speeds - Cyclone separator with a 250 ml bottle for fast sample collection - No sample contamination thanks to easy and quick cleaning - Convenient control panel - Durable 900 W motor Applications: Grinding for NIR analysis Fields of use: Medicine/pharmacy, agriculture, food/feed Input material: Fibrous, soft Operating principle: Pressure, friction Input size*: < 10 mm Final fineness*: < 250 µm Input volume/material quantity*: < 250 ml Speed setting: 10 rpm Rotor speed: 52 / 62 / 72 m/s Rotor diameter: 98.5 mm Sieve sizes: 1 mm / 2 mm Drive: Motor with linear characteristic Drive power: 900 W Electrical data: Various supply voltages Power connection: Single-phase W x H x D (closed): 449 x 427 x 283 mm Net weight: kg Standards/Norms: CE

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2004, Stacionarus vienos ašies smulkintuvas Doppstadt DW2560E Büffel elektrinis Hfjdpfx Aoxmvqvebmjr - Pagaminimo metai: 2004 - Elektrinis variklis 210 kW - Valdymo spinta - Svoris: 26 500 kg Mašina visiškai suremontuota - nauja smulkintuvo ašis - visiškai suremontuotas variklis - pavarų dėžė kaip nauja

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Special Price: €29,970 net One machine is available immediately. This is the ideal machine for shredding voluminous, lightweight aluminium chips or turnings. Not suitable for more solid aluminium parts. Included: + Optimized cutting geometry Hodpfjgmh H Tjx Abmofr + Adapted pusher control + Load-dependent hydraulic pusher (which presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 40x40mm, multiple cutting edges (reversible), Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 m³, Hydraulically operated pusher Screen perforation selectable (15 - 40mm) Extraction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Shredder raised by 30 cm (preparation for conveyor belt) +€2,990 net - Angle conveyor (discharge height approx. 220 cm) +€9,770 net - Overband magnet +€6,980 net - Control system for conveyor and overband magnet +€2,750 net (start and stop synchronized with shredder) We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Sąlyga: naujas, Gamybos metai: 2025, Main pump David Brown Hydreco X1A504650335033 / 124003 / 1C for Powerscreen Chieftain 2100. Original part. This and many more available for all crushers and screens. Hedsigvctspfx Abmjfr

Sąlyga: naudotas, Gamybos metai: 2020, The shredder breaks down large, bulky pieces of polystyrene and EPS, as well as similar materials with a maximum bulk density of 30 kg/m³, into small pieces. In this process, the shredder reduces the volume by approximately 65%. Hsdoxm T I Sopfx Abmofr This makes the machine ideally suited for use in industrial and craft businesses, as well as for wholesalers and retailers dealing in polystyrene packaging materials. Throughput capacity: Screen 10 mm: approx. 3 m³/h Screen 20 mm: approx. 8 m³/h Screen 30 mm: approx. 13 m³/h Screen 40 mm: approx. 18 m³/h Screen 50 mm: approx. 23 m³/h Depending on the selected screen size, your polystyrene waste can be reduced in volume by a ratio of 3:1 simply through shredding. Custom solutions available upon request. VAT will be shown separately on the invoice. Shipping within Germany included (islands subject to surcharge). If you have any questions, please do not hesitate to contact us.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (LxWxH): 1750 x 1100 x 1640 mm Weight: 1000 kg Total power requirement: 15 kW Shredder CHIPPER 510 - Hopper opening: 510 x 810 mm - Hopper shape: straight - Hopper volume: 0.4 m³ - Output depends on material and screen size - Motor: 15.0 kW - Voltage: 400 V / 50 Hz - Rotor diameter: 260 mm - Rotor length: 510 mm - Cutting system: 12 diamond-concave knives 30 x 30 mm - Rotor speed: 70 - 90 rpm - PLC control - Control cabinet (fully wired) incl. 5 m cable - Screen perforation: 8 - 40 mm selectable (standard 15/20 mm) - Suction connection diameter: 160 mm - Slide with pressure beam - Vibration-damping machine feet - Automatic star-delta start-up - Automatic shut-off when idling - Cyclic control to avoid unnecessary idle times - Performance-enhancing incremental hydraulic slide control - CE compliant - Dimensions (LxWxH): 1750 x 1100 x 1640 mm - Weight: 1000 kg Hfedpfjvz Eygox Abmor

Sąlyga: naudotas, Enthaltener Container 28,5 m³ Hfodpfev Hpn Sex Abmer

Sąlyga: naujas, Gamybos metai: 2025, Ekonomiški sprendimai su trumpais pristatymo terminais Transportavimo juostos, tinkančios visiems populiariems sijotuvams, pvz., Doppstadt SM518 / SM618 / SM620 / SM720 / Terra Select T4-T7, Komptech Max, Mustang ir kt. Transportavimo juostos, tinkančios visiems įprastiems smulkintuvams, pvz., Doppstadt Bison / Büffel / Mamut, Biopower, AK 430, AK 235, AK 635 ir kt. Gaminama pagal Jūsų nurodymus: - Ilgis neribojamas - Plotis iki 1800 mm Hfsdoxmvplspfx Abmsr - 2, 3 arba 4 sluoksniai - įvairūs profiliai - Plieninių vielų kiekis: 10 cm/ 35 +/-1 - įvairūs medžiagos storio variantai Aukščiausios kokybės transportavimo juostos

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Demonstration machine with approx. 10 operating hours Another machine available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for increased throughput capacity We are pleased to offer a free test with your material. I would like to invite you to our facility in Neckartailfingen for this purpose. Alternatively, you can ship your material to us via freight, and we will document the test with images and videos. Motor: 18.5 kW; 400 V – 50 Hz – 3-phase Knives: 15 units, reversible multiple times, Optional double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (10–40 mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % Atro Standard equipment included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Fast hydraulics - Automatic shutdown when rotor is idle - Rotational speed 70–90 rpm for high throughput - Cycle control to prevent idle times - Performance-boosting step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder features at extra cost: - Shredder raised by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for over 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or materials with thickness less than 3 mm) - Inclined conveyor belt + €8,770 net Angle adjustable 0–60° Discharge height: approx. 2000 mm - Automatic overbelt magnet + €5,980 net Hodpfx Absb Ny Eyemefr Alternatively, fixed magnet block over the conveyor belt for manual removal + €990 net (for infrequent metal contamination) - Control for conveyor belt and overbelt magnet + €2,750 net (start/stop synchronized with the shredder) alternatively manual start/stop of conveyors + €595 net Raw material requirements: - Moisture content (atro) must be below 30% - Installation environment: temperature-controlled room at minimum +5°C - Metals and mineral contaminants such as sand, stones, etc., result in increased wear

Sąlyga: naujas, Gamybos metai: 2025, This listing concerns a set of cones for the Maxtrak 1000, Maxtrak 1000SR, and Terex Finlay C1540 cone crushers. Outer cone: 22% Mn, 2% Cr – 350 kg – part number 603/9052 Hedpeigvfvsfx Abmofr Inner cone: 22% Mn, 2% Cr – 370 kg – part number 603/9106 Cones manufactured to the highest casting quality standards on the market. Net price Only with us: the chemical composition of cast parts is supplied with a QUALITY CERTIFICATE, confirmed by spectrometer analysis. Do not buy cheaper, inferior cast parts – lower manganese or chromium content can reduce cone lifespan by up to half! We also offer backing material for all cone crushers.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, *Tüm ürünlerimiz özenle üretilmekte olup 1 yıl garanti kapsamındadır! *Kurulum ve Operatör Eğitimi ÜCRETSİZDİR Fabo paletli darbeli kırıcı FTI-130s, hidrolik tahrikli palet sistemi ile 1 km/saat hızla hareket edebilen, titreşimli ızgara besleyici, darbeli kırıcı, katlanabilir stok konveyörleri, kontrol ünitesi ve elektrik jeneratörü kombinasyonuna sahip tam donanımlı bir mobil sistemdir. Günümüz koşullarında ve teknolojik süreçlerinde işletmeler faaliyet alanlarını daha verimli hale getirmenin yollarını aramaktadır. Verimliliği artırırken kullandıkları makinelerin operasyonel kullanım kolaylığı, düşük maliyet ve personel ihtiyacı gibi faktörleri de göz önünde bulundururlar. Paletli Kırıcılarımız, özel tasarlanmış gövdesi ve kompakt yapısı sayesinde en zorlu maden sahalarında bile yüksek performansla kırma işlemi gerçekleştirebilir. Paletli sistemlerimize talebe göre Çeneli Kırıcı, Primer ve Sekonder Darbeli Kırıcı veya Konik Kırıcı entegrasyonu yapılabilir. Paletli Kırıcıların Avantajları; - Ağır hizmet tipi yürüyüş paletleri, sıradan makinelerin ulaşamadığı yerlere erişebilir. - Şehir içinde inşaat atıklarını kırmak için uygun boyutlara ve ses seviyesine sahiptir. - Jeneratör ve yürüyüş paleti ünitelerinin yakıt tüketimi oldukça ekonomiktir. - Son teknoloji kontrol yazılımı ile sistemin bakımı ve yönetimi son derece kolaydır. TEKNİK ÖZELLİKLER: Model: FTI-130s Üretim Kapasitesi: 400-450 ton/saat Maksimum Besleme: 500 mm Kırıcı Tipi: Darbeli Kırıcı EBAT: 1270x1200 mm Hfsdpfex Dhl Hex Abmjr Çıkış Ayarı (CSS): 0-50 mm Toplam Güç: 500 kVA Titreşimli Elek: 1500x4200 mm Ağırlık: 63 ton – Düşük yatırım ve işletme maliyeti – Sıfır altyapı hazırlığı – Kullanım ve bakımda kolaylık – Hızlı montaj ve demontaj DAHA FAZLA BİLGİ İÇİN LÜTFEN BİZİ ARAMAKTAN ÇEKİNMEYİNİZ!!!

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1737 x 1167 x 1650 mm Weight: 1300 kg Total Power Requirement: 18.5 kW Shredder CHIPPER 630 - Hopper Opening: 630 x 800 mm - Hopper Volume: 0.6 m³ - Throughput performance depending on material and screen size - Drive Motor: 18.5 kW Hfjdsvz Ef Njpfx Abmer - Rotor Diameter: 260 mm - Rotor Length: 630 mm - Rotor Speed: 70 - 90 rpm - 30 Karo Blades, 30 x 30 mm - PLC control - Control cabinet (fully wired) incl. 5 m cable - Screen perforation: 8 - 40 mm, selectable - Suction connection: diameter 160 mm - Slide with pressure beam - Vibration-damping machine feet - Automatic star-delta starter - Automatic shut-off in idle mode - Cycle control to prevent unnecessary idle times - CE conformity - Dimensions (L x W x H): 1737 x 1167 x 1650 mm - Weight: 1300 kg

Sąlyga: naujas, Gamybos metai: 2024, Consisting of Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (Production time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (FU) – this controls the speed of the drag floor. Bales are placed on the drag floor and the cutter head’s feed is activated. The tines on the cutter head tear the straw from the bale and throw it into the hopper. Ideally, a combination of bale breaker and straw shredder is recommended here. Technical Data – Bale Breaker: Capacity: 1–2 bales per hour Up to max. 600 kg per hour (depending on screen size used in the straw mill, kW of the straw mill). Without the straw mill, the bale breaker can even dissolve up to max. 900 kg/h of straw. Max. size of square bales: 2400 x 1200 x 800 mm (L x W x H) Cutter head motor: 5.5 kW, 380 Volt Drag floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Extra charge for larger straw shredder (18.5 kW) + €3,940 net Technical Data, MHZ with Special Hopper: Motor: 15 kW, 380 Volt electric Diameter: 600 mm Hardened cutting blades Screen with interchangeable inserts (options: 10, 12, 15, 22, 30, 45 mm hole size) With star-delta switch, overload protection, and 8m supply cable ready to plug in Discharge spout: 160 mm Blowing distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Options at Extra Cost: Feed auger + €970 net Cyclone (to be mounted by customer; should be max. 10 m away) + €2,970 net Simple filter €1,750 net --- Further Options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve (for pressureless material discharge) + €5,750 net Control system: from €1,620 net Special dissolver extension 3 m (other dimensions on request) + €9,750 net Briquetting press MPP 180 S; lightly used demo unit 70 mm briquette – up to max. 100 kg/h from €39,700 net Hfedpfx Ajb Nulhebmor * Larger machines available on request --- Description: The muetek bale breaker was developed for loosening round and square bales of hay and straw. The shredder attached to the bale breaker processes straw from all types of grain, hay, corn, and miscanthus. muetek machines of the MHZ/MHB series are characterized by a robust design and a heavy-duty construction. muetek bale breakers of the MHB series are equipped with a chain conveyor on which the straw bale is placed using a front loader. The support can be adjusted according to the type of bale. The chain conveyor feeds the bale against the milling rotor; the feed speed is adjustable. The milling rotor is equipped with several teeth that tear apart the straw bale. The separated straw is discharged. --- As a rule, the machines are suitable for dry input materials: - Straw - Hay --- The processing of hemp is only possible with a special dissolver. Extra cost approx. €9,720 net, depending on version. The shredder cannot process hemp with the straw mill. Requirements for the input material: Maximum moisture content 12%.

Sąlyga: naujas, Gamybos metai: 2025, Zestaw bijaków martenzytycznych z podwójną warstwą ceramiki do kruszarki Metso 1213. Możemy również zaoferować wersję wysoko chromową z ceramiką do tej maszyny. Hedoihfc Sspfx Abmjfr Wszystkie odlewy pochodzą z odlewni na terenie UE – najwyższa jakość na rynku. Posiadamy również w ofercie bijaki udarowe do wszystkich innych maszyn, takich jak Tesab, Pegson, Rubblemaster, Hartl i wiele innych.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Ideal for shredding polystyrene (EPS) or similar materials. Throughput highly dependent on screen and input material: Hodpfxjh S H T Ue Abmefr - up to 60 kg/h when processing EPS with a 15 mm screen *the coarser the screen, the higher the throughput Motor: 9.2 / 11 kW – 400 Volt Robust steel construction, hardened cutting knives, screen with interchangeable inserts, available perforations (8), (10), 15, 22, 26, 30, 40, or 60 mm With electric drive, supplied with star-delta switch, overload protection, and 8 m power cable, plug-ready. Discharge spout: 150 mm, optionally suitable for plastic or grain pipes, blowing distance approx. 12 m. Chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires. Dimensions (LxWxH): approx. 1200 x 900 x 1270/1400 mm Weight: approx. 240 kg Spare part prices and options: 24 hardened knives: €9.90 each (net) 6 bolts: €14.90 each (net) 1 screen: €475 (net) Cover: €290 (net)

Sąlyga: naujas, Gamybos metai: 2025, This listing is for a jaw plate suitable for Extec C10, Extec C10+, Sandvik QJ240, and QJ241 jaw crushers. Tooth spacing: 55 mm. Fixed jaw, part number J692HDE: 18% manganese, 2% chromium – 901 kg. Movable jaw, part number J693HDE: 18% manganese, 2% chromium – 624 kg. Hjdpfsigvc Tox Abmjfr Part numbers: J6920000 + J6930000. Transport per pallet: 500 PLN net. The jaws are available immediately!

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine with Special Rotor Available immediately Advantages: + Special rotor with reduced blade projection + 22 kW motor + Efficient square blades *For pallets: up to 10 pallets per hour *(dependent on screen size and material). Significantly higher throughput for smaller wood remnants. Motor: 22 kW; 400 V - 50 Hz - 3 ph Screen: 15/20 mm Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Extraction port Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Hfsdpfx Abedv Eu Hsmjr Sample image above: System color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shutdown in case of rotor idle - Speed 70-90 rpm for high throughput - Interval control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *As shown in the last 2 images. - Additional blade row + €2,790 - Segmented floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (Consider for plastic shredding with screens smaller than 15 mm or high fines content. Not necessary if greasing the bearings with lubricant every ~4 weeks during operation) - Raise shredder by 30 cm (prepared for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €5,980 net - Control unit for conveyor belt and overbelt magnet + €2,750 net (Start and stop synchronized with shredder) - Outward-stretched feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Material feed must be free of metals and mineral impurities. Damage to the tools and/or increased wear may occur as a result

Sąlyga: naujas, Gamybos metai: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Hfjdpjd Dgw Usfx Abmor Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multiple reversible Hydraulically operated pusher Screen perforation of your choice (10 - 40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH): approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: - automatic star-delta start - fast hydraulic system - automatic shut-off when rotor is idling - Speed: 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control for the hydraulic pusher - pertinax guides for the hydraulic pusher - vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF panels, and other materials (subject to testing and approval by the manufacturer) Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (upon arrival) must be below 30% - Installation temperature: heated indoor area, at least +5°C - Metal and mineral impurities such as sand, stones, etc., lead to increased wear

Sąlyga: naujas, Gamybos metai: 2026, Single-Shaft Shredder MRZ 530 Includes: + Profile rotor for increased throughput capacity Options: Double blade row + €895 net Veneer and paper stripper + €970 net * Recommended for extremely thin materials with a thickness less than 3 mm Our mütek Single-Shaft Shredder MRZ 530 processes a variety of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine features a robust construction ensuring consistent quality in continuous operation. We are happy to offer a free trial with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight forwarding and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase, Blades: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume: approx. 0.4 m³, Throughput capacity: 1 - 5 hopper fillings/hour, Hsded Db N Iepfx Abmjfr Hydraulically operated pusher, Screen perforation as required (10 - 40 mm), Extraction connection Ø 160 mm, Weight: approx. 1,000 kg, Dimensions: approx. 1550 x 1100 x 1640 mm, Moisture content of raw material must be under 30% (absolutely dry). Standard equipment included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC • Automatic star/delta starting • Automatic shut-off in case of rotor idle • Removable extraction chute • Speed 70 - 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (conveyor preparation): +€1,980 net - Angled conveyor belt: +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet: +€5,980 net - Control for conveyor belt and overband magnet: +€2,750 net (Start and stop each synchronized with the shredder) Requirements for input/raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear