Smulkinimo įrenginys

muetek MRZ 630 - 18,5 kW

Demonstration machine with approx. 9 operating hours
One more machine available immediately (ex works Neckartailfingen)

*Options available at extra cost – see below

Included:
+ Profile rotor for higher throughput capacity

We are happy to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarding, and we will document the test with photos and videos.

Godpfxeb Ny Eys Ab Setw
Motor: 18.5 kW; 400 V - 50 Hz - 3 phase
Blades: 15 pieces, multiple turning positions
Option of double blade row + €995 net

Rotor diameter: 260 mm
Control system: Siemens S7-1200 PLC
Cutting unit opening: 630 x 820 mm
Hopper volume approx. 0.6 m³
Hydraulically operated pusher
Screen perforation as desired (10 - 40 mm)
Extraction port Ø 160 mm
Weight approx. 1,300 kg
Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm
Moisture content: < 30% a.d. (absolutely dry basis)

Standard equipment includes:
- V-rotor for maximum throughput
- Control cabinet with Siemens PLC controller
- Automatic star-delta starter
- High-speed hydraulics
- Automatic shut-off when rotor is idling
- Speed 70-90 rpm for high throughput
- Cycling control to minimize idle times
- Performance-enhancing step control for hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE conform.

Optional shredder features at extra cost:

- Raise shredder height by 30 cm (preparation for conveyor belt) + €2,080 net

- Eco-rings: + €1,980 net
(recommended for more than 20% hardwood)

- Double blade row + €995 net

- Special scraper + €990 net
(recommended for shredding veneer or paper, or material thickness less than 3 mm)

- Angled conveyor belt + €8,770 net
Angle: adjustable 0-60 degrees
Discharge height: approx. 2,000 mm

- Automatic overband magnet + €5,980 net

Alternatively, fixed magnetic block over the conveyor belt for manual cleaning + €990 net (for low metal content)

- Control for conveyor belt and overband magnet + €2,750 net
(Start and stop each synchronised with the shredder) Alternatively, manual start and stop of the belts + €595 net

Material requirements:
- Moisture content (a.d.) must be less than 30%
- Installation temperature: heated area with at least +5°C
- Metals and mineral contaminants such as sand, stones, etc., lead to increased wear

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.