Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2014, veikimo valandos: 51 488 h, Šis Citizen CINCOM A32-VII CL šveicariško tipo tekinimo staklės pagamintas 2014 metais. Mašina turi pagrindinį veleną, kurio darbinis diametras siekia 32 mm, priešpriešinį veleną bei maksimalų tekinimo ilgį iki 3000 mm. Aukšto greičio CHIDOMI sistema užtikrina visų ašių sinchroninius judesius ir iki 9 000 mm/min padavimo greitį. Pasinaudokite proga įsigyti šias Citizen CINCOM A32-VII CL šveicariško tipo tekinimo stakles. Dėl išsamesnės informacijos apie šią mašiną susisiekite su mumis. Pritaikymo sritys Ihedpfx Ajx D Nhpsgfsw Tekinimas

Būklė: naudotas, Gamybos metai: 1998, veikimo valandos: 97 593 h, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 65 mm, veleno skylė: 79 mm, veleno greitis (maks.): 4 500 aps./min, veleno greitis (min.): 25 aps./min, For sale: Gildemeister MF Sprint 65 CNC lathe with 3-meter bar feeder, as shown in the photos. The machine was dismantled from our workshop in fully functional condition. A video of the machine in operation prior to dismantling can be provided on request. Approximately five years ago, the linear guides of the X1 and Z1 slides (main spindle side) were renewed, including bearings and belts. Recently, a new HMI interface was installed. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DETAILS Control: Sinumerik 840C Bar feeder: SIMAG 65.1-3200G, year of construction 1998 Bar length: 3 m Bar diameter/spindle bore: 65 mm Main drive Power rating: 28 / 21 kW Speed range: 25 – 4,500 rpm Torque: 320 / 240 Nm Feed rate for thread cutting: max. 10 m/min C-axis speed: 120 rpm C-axis holding torque: 180 Nm Tool turret Number of tools: 8 Shank diameter to DIN 69880: 30 mm Number of driven tool stations: 4 Power: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Tool turret 1 speed: max. 4,000 rpm Tool turret 2 speed: max. 4,000 rpm Slide 1 Cross travel / longitudinal travel: 155 / 280 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Ball screw pitch X: 15 × 25 mm Ball screw pitch Z: 15 × 32 mm Slide 2 Cross travel / longitudinal travel: 82 / 120 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Ball screw pitch X/Z: 15 × 25 mm MACHINE DETAILS Dimensions incl. bar feeder and chip conveyor (L×W×H): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Cooling system - Chip conveyor - Documentation Ihedpfxjwym Nfo Agfsw

Būklė: naudotas, Gamybos metai: 2020, Turning diameter 380 mm Turning length 511 mm Control Mazatrol SmoothG Turning diameter over cross slide 276 mm Max. swing diameter over bed 675 mm Standard machining diameter 276 mm Bar capacity 65 mm X-axis travel 234 mm Rapid traverse X-axis 30 m/min Z-axis travel 625 mm Rapid traverse Z-axis 33 m/min Speed range 35 - 5000 rpm Spindle nose A2-6 Spindle bore 76 mm Ihodpfx Ajtugggegfow Power (40% duty cycle) 26 kW Rated power (100% continuous operation) 22 kW Max. torque 465 Nm Speed 6000 rpm Main drive power 11 kW Max. torque 90 Nm Milling spindle speed (driven tools) 35-6000 rpm Max. torque at milling spindle: 47 Nm Drive power - milling spindle 5.5 kW (40% duty cycle) Milling spindle power (continuous operation) 3.7 kW Number of tool stations 12 (driven) Tool cross section (external) 25 sq mm Boring bar diameter 40 mm Drill diameter 20 mm Milling cutter diameter 20 mm Tapping diameter M20x2.5 Turret indexing time approx. 0.20 sec Coolant tank 180 l Connected load 46.2 kW Machine weight approx. 5.9 t Space requirement approx. 2.7 x 1.9 x 1.9 m Machine is in as-new condition Including the following accessories: - Signal light (3-color LED), rectangular - High-performance coolant system (1.1 kW) max. flow rate 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/connection 98mm - Preparation for bar feeder - Robot interface (Advance/Profibus) - Chip conveyor with low discharge height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preparation for use of a hollow clamping cylinder on sub-spindle - Hollow clamping device including draw tube + cylinder - Hainbuch Spanntop Nova Axfix mini size 52 collet chuck - Hainbuch Spanntop Nova Axfix special mini size 52 chuck - 2 x collets - Collet change device STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device at chuck on sub-spindle Linear guide system with guide carriages USB interface (1 port) Set of manuals in electronic form on CD C-axis main spindle input accuracy 0.0001° Sub-spindle positioning without C-axis input accuracy 0.001° 12-station VDI turret Operator door with safety interlock switch Double foot switch for main and sub-spindle Hydraulic pressure locking Fully enclosed work area, work area lighting Safety devices to worldwide standards High-performance coolant system (520W), max. flow rate 11.5 l/min. Complete coolant system Automatic opening/closing of chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (side) Synchronization of main and sub-spindle Synchronous tapping with milling spindle Relocation detector Mazatrol SmoothG control, 19" LCD color display (touch screen) User macro (600 variables), EIA/ISO input function Optional stop function Tool path verification in background Thread cutting function (G33), polar coordinate input (EIA) Drawing data direct input function LAN, SD memory card interface - Used machine, sold as is, without warranty -

Būklė: naudotas, Maximum turning diameter: 360 mm Turning length: 505 mm Control: Mazatrol SmoothC Max. swing diameter over bed: 660 mm Max. swing diameter over slide: 255 mm Max. bar diameter: 80 mm Spindle speed range: 35 - 4000 rpm Spindle torque: 358 Nm X-axis travel: 225 mm Rapid traverse X-axis: 30 m/min Z-axis travel: 605 mm Rapid traverse Z-axis: 33 m/min Spindle nose: A2-8'' Spindle bore: 91 mm Spindle through-hole: 80 mm Milling spindle speed (driven tools): 5000 rpm Max. torque at milling spindle: 47 Nm Ijdpfx Aov Dxw Rogfshw Milling spindle drive power: 5.5 kW (40% duty cycle) Tailstock quill taper: MK 5 Tailstock travel: 565 mm Max. axial thrust: 5000 Nm Tool turret: 1 Number of tool stations: 12 (driven) Turning tool shank cross-section: 25 x 25 mm Tool holder system: BMT Compressed air connection: 5 / 160 bar / l/min Operating voltage: 400 V Coolant tank: 180 l Motor power: 18.5 kW (30 min operation) Rated power (100% continuous operation): 15 kW Machine weight: approx. 6 t Space requirements: approx. 3.6 x 2 x 1.8 m Machine including the following special equipment: Chip conveyor, side right Productivity package C – special, as per stock machine This package includes: High-performance coolant system (1.1 kW) max. flow rate 17.6 l/min Preparation for chip conveyor (side) Automatic tool eye STANDARD EQUIPMENT Transformer for the European market Linear guideways with carriages SD MEMORY I/F (1P) + USB MEMORY I/F (1P) 1 x USB memory interface (1 slot) Spindle bore: 91 mm Set of manuals in electronic form on CD Mazak standard color CE marking, metric, 50 Hz C-axis positioning accuracy: 0.0001° NC-controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot pedal Hydraulic pressure interlock Fully enclosed work area Work area lighting Safety measures compliant with global standards COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic shut-off via circuit breaker MEASUREMENT SYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation detector Mazatrol SmoothC 10.4" colour monitor User macro (600 variables) EIA/ISO input function Background tool path simulation Thread cutting function (G33) Polar coordinate input (EIA) Direct drawing data input function LAN interface Various tool holders - All dimensions, weights and performance data are non-binding - - Used machine, sold without warranty -

Būklė: naudotas, Gamybos metai: 2022, Turning diameter: 276 mm Turning length: 500 mm Control: Mazatrol Smooth G Max. swing diameter over bed: 695 mm Distance spindle end - turret: 710 mm Max. bar diameter: 65 mm Spindle speed range: 35 - 5,000 rpm Spindle torque: 465 Nm X-axis travel: 234 mm Rapid traverse X-axis: 30 m/min Y-axis travel: 100 mm Rapid traverse Y-axis: 21 m/min Z-axis travel: 625 mm Rapid traverse Z-axis: 33 m/min Spindle nose: A2-6 Spindle bore: 76 mm Milling spindle speed (live tools): 5,000 rpm Max. milling spindle torque: 47 Nm Milling spindle drive power: 5.5 kW (40% ED) Tailstock quill: MK5 Tailstock travel: 550 mm Tool turret: 1 Number of tool stations: 12 (driven) Tool holder: VDI 30 min rated power: 42.6 kVA Compressed air connection: 0.5 / 330 MPa / l/min Distance spindle / table: 710 mm Total connected load: 37 kW Machine weight approx.: 5.7 t Space requirement approx.: 2.8 x 2 x 1.9 m with the following special accessories: - Mayfran chip conveyor, side discharge, hinged belt conveyor - Engraving function ACCESSORIES / MACHINE OPTIONS Automatic ON/OFF and warm-up function A warm-up is necessary to prevent issues such as abnormal wear of the slideways and jerky movement. Sufficient warm-up allows the machine to reach the thermal stability required to process workpieces with consistently high precision. Transformer for European market 8" chuck for main spindle with enlarged bore USB port (1 connection) Mazak standard color Main spindle motor AC 26 kW 12-position tool turret VDI, also for driven tools—maximum power only when the cutting tool is driven. Programmable tailstock (MK5) Tailstock quill (MK5) Y-axis control SAFETY DEVICES Operator door with safety interlock Double foot switch Separate switches for opening and closing the chuck. Hydraulic pressure interlock Fully enclosed work area Work area lighting COOLANT SUPPLY High-performance coolant system (520W), max. flow rate 11.5 l/min Complete coolant system CHUCKS, ETC. Automatic opening/closing of chuck jaws 8" power chuck with enlarged bore (main spindle) Kitagawa BB208 MEASURING SYSTEM Automatic Tool Eye NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation detector Mazatrol SmoothG control 19" color LCD touchscreen User macro (common variables: 600 pairs) Mazak threading/drilling cycle Tornado in EIA/ISO (only possible on machines with Y-axis). EIA/ISO package EIA/ISO input function EIA/ISO additional functions: - Helical interpolation - 3D tool compensation - Workpiece coordinate rotation - Geometric functions - Scaling - External data input/output Thread cutting function (G33) Inverse time feed G93 G37 tool length measurement Ihodpfx Asynbd Sjgfew Polar coordinate input (EIA) Optional stop Additional workpiece coordinate systems (300 sets) User macro (600 variables) Mazak threading/drilling cycle Tornado in EIA/ISO. EIA/ISO drilling cycles (arc, grid, circle, circular arc, line) Machining on inclined surfaces EIA/ISO input function Tool path simulation in the background...

Būklė: naudotas, Turning diameter 340 mm Turning length 575 mm Control system Mazatrol SmoothEZ Max. swing diameter over bed 695 mm Standard machining diameter 235 mm Max. bar capacity 65 mm X-axis travel 215 mm Rapid traverse X-axis 30 m/min Y-axis travel 100 mm Rapid traverse Y-axis 10 m/min Z-axis travel 605 mm Rapid traverse Z-axis 30 m/min Spindle speed 35 - 5,000 rpm Spindle nose A2-6 Spindle bore 76 mm Power (40% duty cycle) 15 kW Rated power (continuous duty) 11 kW Max. torque 167 Nm Spindle speed 35 - 6,000 rpm Spindle nose A2-5 Power (40% duty cycle) approx. 7.5 kW Power (continuous duty) 5.5 kW Max. torque 53 Nm Milling spindle speed (driven tools) 20 - 4,500 rpm Max. torque on milling spindle: 47 Nm Drive power – milling spindle 5.5 (40% duty cycle) kW Milling spindle power (continuous) 3.7 kW Number of tool stations 12 (driven) Tool shank (external) 25 sq mm Boring bar diameter 40 mm Drill diameter 20 mm Milling cutter diameter 20 mm Tap diameter M20 Coolant tank 225 l Chuck diameter main spindle 8'' Chuck diameter sub spindle 6'' W-axis travel 585 mm Rapid traverse W-axis 30 m/min C-axis 555 Machine weight approx. 4.9 t Space requirement approx. 2.8 x 2 x 1.8 m Special accessories: - Chip conveyor, hinged belt, side discharge - Production package, this package includes: Preparation for bar feeder Automatic parts catcher (Ø:80mm x L:120mm x 2.5 kg) 15 bar high-pressure coolant system Preparation for chip conveyor (side) Signal beacon (3-color LED), rectangular C-axis sub spindle 0.0001° Automatic Tool Eye 8" power chuck Kitagawa BR08 & cyl. SR1566C (HD1) GENERAL MACHINE OPTIONS Air blow-off device at chuck (sub spindle) Transformer for European market Linear roller guides SD MEMORY I/F (1 port) + USB MEMORY I/F (1 port) 1 x USB-Memory Interface (1 slot) CE marking CE marking, metric, 50 Hz Sub spindle positioning 0.0001 degrees without C-axis 12-station turret Y-axis control ADDITIONAL PROCESS SOFTWARE Smooth Restart function / restart mode Set of manuals in electronic form on CD Main spindle motor AC 15 kW (20 HP) Second spindle motor AC 7.5 kW MAIN SPINDLE C-axis main spindle indexing accuracy (contour/index) 0.0001° Mazak standard color (F White (Fine)/S Black) Automatic shut-off via safety switch actuation Double foot switch Hydraulic pressure interlock RFID door lock Safety foot switch with locking mechanism Safety measures according to global standard Work area lighting Complete coolant system Automatic opening/closing of chuck jaws (main and sub spindle) Chuck status feedback (main and sub spindle) Chuck status feedback via sensors. 8" power chuck 6" power chuck (sub spindle) Absolute positioning system Synchronous tapping with milling spindle Relocation detector Ihsdpfx Aowngklegfew NC control Mazatrol SmoothEz 15" color LCD (touch screen) User macro (common variables: 600 pairs) EIA/ISO package EIA/ISO - input function EIA/ISO - additional functions Helical interpolation 3D tool compensation Workpiece coordinate rotation Geometric function Scaling External data input/output Thread cutting function (G33) Dwell feed G93 G37 tool length measurement Polar coordinate input (EIA) Optional stop Additional workpiece coordinate...

Būklė: naudotas, Gamybos metai: 2012, Turning diameter 203 mm Turning length 300 mm Control Mazatrol Smart Distance spindle end - turret 99-434 mm Max. turning diameter 280 mm Bar diameter 51 mm Travel - X 200 mm Travel - Z 340 mm Spindle speed 35 - 6000 rpm Rapid traverse X-axis 33 m/min Rapid traverse Z-axis 36 m/min Spindle bore 61 mm Tool turret 12-station Turning tool shank cross-section 20 mm Boring bar diameter 32 mm Workpiece weight 150 kg Spindle nose A2-5 Taper in tailstock quill MK4 Tailstock travel 350 mm Total power requirement 16.3 kW Machine weight approx. 3.5 t Space requirements approx. 1.9 x 1.6 x 1.8 m Special accessories: Automated Tool Eye Spindle orientation Ihedpfoynbd Eex Agfsw Signal light Additional coolant nozzles above chuck Automatic shut-off Interface for bar feeder Automatic parts catcher Ø 51 x L: 100 x 2.5 kg Workpiece conveyor for automatic parts catcher with workpiece deposit Chip conveyor, side discharge Incl.: Automatic short bar magazine LNS QUICK LOAD SERVO 80_S2 Diameter range: 6 - 80 mm round and hexagonal material Bar lengths: 350 - 1600 mm, but max. spindle stock length / accident prevention regulations Max. weight 67 kg per bar Burr-free bars or bar sections Depth 600 mm for bar accommodation Input voltages from 200 – 460 Volt / Operating voltage 24 V DC LNS control programmed on SIEMENS STEP 7 PLC Flexible control panel with large screen User guidance via symbols for easy operation and setup Unit cover with 2 viewing windows made of Plexiglas.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 5 500 h, Funkcionalumas: visiškai funkcionalus, Valdymo sistema SIEMENS 840D SL Shopturn Apdirbimo diametras virš lovos 580 mm Apdirbimo diametras virš skaidyklių 320 mm Maks. tekinimo diametras 320 mm X ašies eiga 242 mm Y ašies eiga +/- 40 mm Z ašies eiga 540 mm Atstumas tarp centrų 780 mm Greitėjimo eiga X/Z 30/36 m/min Greitėjimo eiga Y 22,5 m/min Sukimosi greitis 5000 aps./min Verpstės nosis A2-6 Verpstės skylė D73 mm Pereinimas 51 mm Variklio galia 16,5/11 kW Revolverinė galvutė 12 pozicijų (su vidiniu aušinimu) Tvirtinimas VDI30 C ašis programuojama Atraminis įvorė Morse 4 Atraminio kelias 550 mm Judėjimas hidraulinis Energijos poreikis 28 kVA Svoris apie 4400 kg Matmenys (su drožlių transporteriu) 2800 (3680) x 1780 x 1850 mm Priedai, įranga - SMW hidraulinis griebtuvas D210 mm su D65 pereinimu (verpstė užblokuota) Isdpfx Ajyr I A Aegfohw - Drožlių transporterio juosta - Aušinimo sistema - C+Y ašys - Integruotas įrankių matavimo svirtis - Atrama (kontrasmeigis) - Instrukcijos

Būklė: naujas, Gamybos metai: 2026, Universal Lathe CORMAK TORNADO 460x1000 Main advantages of the machine - Versatile applications: turning cylindrical, conical, internal and external surfaces, drilling, broaching, polishing and a wide range of threading. - Powerful 5.5 kW motor ensures smooth performance even under heavy loads. - Large spindle bore ø82 mm enables machining of long and heavy shafts. - 2-axis digital readout with optical scales increases operational accuracy and operator comfort. - Removable bridge allows machining of workpieces up to 690 mm in diameter and 240 mm in length. - Stable cast iron construction with a hardened and ground 300 mm wide bed reduces vibrations and enhances durability. Construction and Technology At the heart of the CORMAK TORNADO 460x1000 lathe is a massive, precisely machined cast iron bed that guarantees stability under all conditions. The spindle with D1-8 nose, mounted on a reinforced bearing system, provides high rigidity and smooth operation at speeds from 25 to 2000 rpm. Thanks to the use of hardened and ground gears, the spindle gearbox boasts exceptional durability and quiet operation. Precision and Work Efficiency The built-in digital position readout on the X and Z axes allows for precise tool positioning, ensuring high repeatability of the process. A quick-feed joystick simplifies carriage movements and reduces setup and shutdown times. With the thread dial indicator, the operator can easily align the carriage at the proper time without recalculating thread leads. Standard Equipment - 3-jaw chuck 250 mm + internal and external jaws - 4-jaw chuck 320 mm + internal and external jaws - Fixed and travelling steady rests - 2-axis digital readout (optical scales) - MK7/MK4 reducing sleeve - Change gears, coolant system, work light - Fixed centre MK4, oil gun, set of maintenance tools - Guards compliant with CE standards, Polish manual, CE Declaration of Conformity Optional Equipment - MK4 turret head - MK4/B16 drilling arbor - 3-16/B16 drill chuck - HSS-Co5 cobalt drill set / 1–13 mm - ES-12 coolant 1L - Taper turning attachment Technical Specifications: - Swing over bed: ø460 mm - Swing over cross-slide: ø274 mm - Swing in gap (diameter x width): 690 mm x 240 mm - Centre height: 230 mm - Distance between centres: 1000 mm - Bed width: 300 mm - Max tool shank cross-section: 25 x 25 mm - Total cross-slide travel: 290 mm - Total top-slide travel: 120 mm - Spindle bore: ø82 mm - Spindle nose: D1-8 - Spindle taper: ø90 (1:20) - Number of spindle speeds: 12 - Spindle speed range: 25-2000 rpm - Leadscrew diameter and thread: ø35mm x 6 mm - Imperial threads (TPI): 2-112 TPI (60) - Metric threads: 0.1-14 mm (41) - Diametral pitch gears: 4-112 D.P. (50) Ihodjvzzffopfx Agfjw - Module gears: 0.1-7 M.P. (34) - Longitudinal feed: 0.054 - 3.04 mm/rev (42) - Cross feed: 0.037 - 2.048 mm (42) - Tailstock quill travel: 120 mm - Tailstock quill diameter: ø60 mm -Tailstock taper: MT no. 4 - Spindle drive motor: 5.5 kW - Coolant pump motor: 0.09 kW - Machine dimensions (LxWxH): 2170x1040x1340 mm - Net/gross weight: 1750/2000 kg

Būklė: naujas, Gamybos metai: 2026, INDUSTRIAL UNIVERSAL LATHE WITH TURNING DIAMETER - 500 mm, TURNING LENGTH - 1500 mm, AND SPINDLE BORE 105 mm Machine Features A modern, production-grade universal lathe, easy to operate, equipped with a 3-axis digital readout. Ideal for repair shops, tooling operations, and serial production. - Versatile applications in general machine building, part manufacturing, series production, vocational training workshops, etc. - Removable bridge enables machining of large-diameter workpieces. - Modern spindle supported by ball bearings. - Central feed switching system, lead screw and feed shaft for threading. - Precise speed and feed controls. - The machine bed is exceptionally torsion-resistant and vibration-free, ensuring fundamental prerequisites for high-accuracy turning. Technical Specifications TURNING DIAMETER OVER BED: 500 mm with LCD readout Ijdsi Apqlopfx Agfjhw TURNING DIAMETER OVER SLIDE: 300 mm TURNING DIAMETER IN BRIDGE GAP: 710 mm TURNING LENGTH IN GAP: 240 mm DISTANCE BETWEEN CENTERS: 1500 mm BED: inductively hardened BED WIDTH: 400 mm CHUCK DIAMETER: 315 mm SPINDLE BORE: 105 mm SPINDLE NOSE: D1-8 CAMLOCK SPINDLE TAPER: MT 6 SPINDLE SPEED RANGE: 36 - 1600 rpm (12 steps) MAX TOOL DIMENSIONS: 25 x 25 mm LONGITUDINAL FEED RANGE: 0.063 - 2.52 mm/rev CROSS FEED RANGE: 0.027 - 1.07 mm/rev METRIC THREADS: 1 - 14 mm (22 types) INCH THREADS: 28-2 TPI (25 types) MODULAR THREADS: 0.5-7 mm (18 types) D.P. THREADS: 56-4 D.P. (24 types) RAPID LONGITUDINAL FEED: 4.5 m/min RAPID CROSS FEED: 1.9 m/min TAILSTOCK QUILL DIAMETER: 75 mm TAILSTOCK QUILL TRAVEL: 150 mm TAILSTOCK QUILL TAPER: MT 5 DIGITAL READOUT: for 3 axes MAIN MOTOR POWER: 7.5 kW COOLANT PUMP POWER: 0.09 kW OVERALL DIMENSIONS: 3132 mm x 975 mm x 1270 mm NET WEIGHT: 3300 kg (3800 kg gross) Available Equipment: - 3-axis digital readout - 3-jaw self-centering chuck, Ø315 mm - 4-jaw independent chuck, Ø400 mm - Faceplate - Traveling steady rest - Fixed steady rest - Spindle reducing sleeve - Fixed center - Rapid carriage feeds - Foot-operated emergency brake - Full-length chip guard - Latest CE-compliant safety covers - Cooling system - 24V halogen lighting system - Threading dial indicator - Complete set of service tools - Operating manual in Polish - EC Declaration of Conformity (CE) For more information, please visit our website.

Būklė: naujas, Gamybos metai: 2026, CORMAK 360 Metal Lathe – New, Upgraded Model! The CORMAK 360 metal lathes are a new and improved version of the popular machines for metalworking. Upgrades include an enhanced tool post guard, improved spindle bearing system, and a new digital readout. These lathes are suitable for production facilities, workshops, and toolrooms, making them ideal for small batch and one-off production. Key Upgrades: - High-quality, reinforced spindle bearing system - New CE-compliant guard system - Latest axis digital readout model - Reinforced and modernized lathe base with tool drawers and chip tray Machine Features - Reinforced, ribbed bed for maximum vibration reduction; precision ground and hardened - Digital axis readout as standard - Large spindle bore (52 mm) ensures optimal machining performance - Adequate bed width for stable and precise operation - The machine is equipped with a high-quality, reinforced spindle bearing system - Efficient machining thanks to two automatic feeds and lead screw/feed shaft equipment - Hardened gears in the spindle gearbox - Adjustable overload clutch on the lead shaft - Full thread cutting range without changing gear wheels - Feed selection lock: by screw or by shaft - Removable gap bridge for machining workpieces of increased diameter - Removable chip tray and tool drawers for improved workflow Technical Specifications Ihjdpfxoiz S R Nj Agfow - Max turning diameter: 360 mm - Max turning diameter over carriage: 220 mm - Max turning diameter in gap: 490 mm - Max turning length in gap: 168 mm - Turning length between centres: 970 mm - Bed width: 187 mm - Spindle nose: D1-4 - Spindle bore: 52 mm - Spindle speed range: 90-2000 rpm - Number of spindle speed ranges: 8 - Longitudinal feed range: 0.055 – 1.291 mm/rev - Cross feed range: 0.014 – 0.345 mm/rev - Max tool size: 16 x 16 mm - Metric thread: 0.4 – 7 mm - Imperial thread: 4 – 60 TPI - Tailstock quill diameter: 32 mm - Tailstock quill taper: MT3 - Main motor power: 1.5 kW - Coolant pump power: 0.1 kW - Weight: 570 kg - Dimensions: 1890 x 720 x 1500 mm Standard Equipment - Digital axis readout - 3-jaw lathe chuck (200 mm) - 4-jaw lathe chuck (200 mm) - Faceplate - Fixed steady - Travelling steady - Reducing sleeve - Fixed centre - Coolant system - Work light - Change gear set - Thread dial indicator - Service tools - Lathe base - Operating manual (Polish) - EC/CE declaration of conformity - Brand new machine – full warranty For more information, please visit our website.

Būklė: naujas, Gamybos metai: 2026, Industrial Metal Lathe CORMAK GOLIAT 660 x 4000 mm – robust cast iron bed construction, equipped with a 12-speed gearbox and a powerful 7.5 kW / 400V induction motor – maximum torque and large spindle bore of 105 mm. Main Features: - Central feed shifting system, equipped with leadscrew and feed shaft for threading. - Digital readout operates on three axes: longitudinal, cross, and top slide. The processed electronic signal from optical scales visualizes movement values along the axes on the digital display. - The lathe is fitted with a high-quality, reinforced spindle bearing system. The main spindle uses modern ball bearings. - Optimum performance is ensured by a large spindle bore of 105 mm, 4000 mm centre distance, 320 mm three-jaw chuck, and a powerful 7.5 kW motor. - The rapid longitudinal and cross feed system significantly reduces machining time and increases productivity. - Hardened and ground gears in the headstock ensure long-term operational stability. - Equipped with leadscrew and feed shaft for thread cutting, automatic longitudinal and cross feeds. - Easy adjustment of spindle speed and automatic feed from ergonomic control panel on the gearbox. - Wide threading range without the need to change gears in the quick-change gearbox. Extensive threading range: metric (22) 1 – 14 mm, imperial (25) 2-28 TPI, module (18) 0.5-7 M.P., DP (24) 4-56 D.P. Capable of cutting right and left-hand threads. - Threading dial for precise thread pitch counting. This function saves time, enabling rapid disengagement of the leadscrew nut to quickly return the carriage to its original position by hand in several passes. - The bed is fitted with a removable gap bridge for turning large workpieces such as discs. This lathe model allows machining of up to 870 mm maximum diameter with the gap bridge removed. Technical Data Maximum turning diameter over bed: Ø660 mm Maximum turning diameter over carriage: Ø420 mm Maximum turning diameter in gap: Ø870 mm Gap length: 240 mm Centre distance: 4000 mm Maximum turning length: 3950 mm Spindle bore: Ø105 mm Spindle nose diameter and taper: Ø113 mm 1:20 Spindle mount: D1-8 CAMLOCK Spindle speeds: 12 speeds (36-1600 rpm) Number and range of longitudinal feeds: 65 (0.063-2.52 mm/rev) Ihedpfsvw Abgox Agfjw Number and range of cross feeds: 65 (0.027-1.07 mm/rev) Metric threads: 22 (1-14 mm) Imperial threads: 25 (28-2 TPI) Module threads: 18 (0.5-7 mm) DP threads: 24 (56-4 DP) Rapid longitudinal feed: 4.5 m/min Rapid cross feed: 1.9 m/min Leadscrew pitch: 12 mm Spindle axis to tool surface distance: 28 mm Tool size: 25x25 mm Maximum top slide travel: 145 mm Maximum cross slide travel: 380 mm Tailstock quill diameter: 75 mm Tailstock taper: MT5 Maximum tailstock quill travel: 150 mm Tailstock offset: ±15 mm Main motor S1/S6: 7.5/9 kW / 400V Rapid feed motor: 250 W Coolant pump: 60 W, 25 L/min Overall dimensions (L/W/H): 5500 x 1100 x 1450 mm Weight: 5,200 kg

Būklė: naujas, Gamybos metai: 2026, Efficient CNC Lathe CORMAK 320x750 SAM6 with Optional Equipment Tailored to Your Needs. Thanks to a variety of optional equipment, you can configure the lathe to suit your requirements. Choose from different controls, such as the SINUMERIK 828, add a tool probe for automatic measurement, or a hydraulic chuck for fast and convenient handling. A wide range of additional options, such as a travelling steady, internal cabin mist separator, or even CAD/CAM software, makes this lathe a versatile tool ready to tackle even the most demanding tasks. Technical data TURNING DIAMETER OVER BED: 320 mm TURNING DIAMETER OVER SLIDE: 90 mm (option: 135 mm) DISTANCE BETWEEN CENTRES: 750 mm SPINDLE SPEED: 100–2500 rpm SPINDLE BORE: 60 mm SPINDLE NOSE: MT5 Ihedpfx Aewtnvmsgfow NUMBER OF TOOLS: 6 TOOL SIZE: 16x16 mm MAXIMUM SHAFT DIAMETER THROUGH SPINDLE: 44 mm TAILSTOCK QUILL TAPER: MT3 MAXIMUM TAILSTOCK STROKE: 100 mm MOTOR POWER: 5.1 kW (S1) / 3.7 kW DIMENSIONS: 2370 x 1420 x 2000 mm NET/GROSS WEIGHT: 1040/1300 kg Standard equipment - SINUMERIK 808D control (Polish language) - SIEMENS servo drives - 3-jaw manual lathe chuck - 6-position turret head - Set of soft jaws - Manual tailstock - Cooling system - Automatic lubrication system for gears and guides - 24V halogen lighting - Technical documentation (Polish) - CE declaration Optional equipment - Available controls: SINUMERIK 828, FANUC, GSK - Hydraulic chuck - Hydraulic tailstock - Travelling steady - Fixed steady rest - Tool probe - Additional soft jaws - Hard jaws - Collet chucks - Finished parts catcher - Bar feeder - Internal cabin mist separator - Used oil separator from coolant - Tool holders - CAD/CAM software

Būklė: naujas, Gamybos metai: 2026, The TYTAN CENTER 750 Vario lathe-milling machine combines two machines into one unit for enhanced user convenience and space-saving in the workspace. It features stepless spindle speed control for both the lathe and milling operations. Turning capacity: 250x750mm, 0.75 kW/230V; Milling capacity: 0.6 kW/230V. Lathe functions include: external and internal cylindrical surface machining, threading, and cutting of workpieces. Milling functions include: slot milling, drilling, and reaming. This machine is ideal for small-scale industrial enterprises, workshops, garages, etc. Main machine advantages: - Combination of two functions—turning and milling—in one compact design. - Separate spindle motors for the lathe and mill, each with stepless speed regulation, enabling independent operation. - LCD displays for accurate speed monitoring and precise spindle speed adjustment. - Two spindle speed ranges to suit various materials and machining methods. - Complex workpiece machining—no need for reclamping between machines. - Rigid dovetail guideways—for high stability during milling. Ihsdpfx Agew H Rdmofjw Technical specifications: LATHE - 3-jaw chuck: 125 mm - Swing over bed: 250 mm - Swing over cross slide: 150 mm - Distance between centers: 750 mm - Bed width: 135 mm - Spindle bore: 29 mm - Spindle taper: MT4 - Spindle speed control: Stepless (2 ranges) - Spindle speeds: 50–1125 / 100–2250 rpm - Metric threads: (18) 0.2–3.5 mm - Imperial threads: (21) 8–56 TPI - Longitudinal feed: (6) 0.07–0.4 mm/rev - Compound rest size: 65 x 65 x 20 mm - Max. tool dimension: 12 x 12 mm - Top slide travel: 70 mm - Cross slide travel: 130 mm - Longitudinal travel: 630 mm - Tailstock quill diameter: 30 mm - Tailstock quill travel: 70 mm - Tailstock taper: MT2 - Motor power (S1/S6): 0.75 / 0.9 kW / 230 V MILLING MACHINE - Max. drilling diameter: 16 mm - Spindle quill taper: MT2 - Quill travel: 50 mm - Head tilt: –90° to +90° - Spindle–column distance: 170 mm - Spindle–table distance: 43–250 mm - Spindle speed range: 50–2250 rpm - T-slot size/number: 2 x 8 mm - Motor power: 0.6 kW / 230 V GENERAL PARAMETERS - Machine dimensions (LxWxH): 1350 x 580 x 1630 mm - Weight: 230 kg Standard equipment: - 125 mm 3-jaw lathe chuck with reversible jaws - Machine base - Fixed centers MT2 and MT4 - Drill arbor and chuck MT2/B16 - Change gears - Set of wrenches, oil can, service tools - CE-compliant guards

Būklė: naujas, Gamybos metai: 2026, Universal lathe CORMAK 500 x 1000 (CJ6250C x 1000) is a robust and precise conventional metalworking lathe designed for professional use in industrial plants, toolrooms, and maintenance workshops. Thanks to its high bed rigidity, modern drive system, and versatile equipment, the machine ensures reliable and repeatable operation for both single and series production. Ijdpfx Agjxd Upxofohw Key machine advantages: - Induction-hardened bed, resistant to twisting and vibration – guarantees machining accuracy. - Removable bridge allows machining of workpieces up to 630 mm in diameter. - Modern spindle bearing system with ball bearings ensures stable operation at high speeds. - Precise speed and feed regulation – complete control of process parameters. - Rapid longitudinal and cross feeds – increase productivity. - 3-axis digital readout facilitates dimensional control and reduces setup time. - Extensive threading capabilities – metric, imperial, module, and D.P. threads. - 5.5 kW main motor – high power for demanding machining tasks. Standard equipment: - 3-axis digital readout - 3-jaw self-centering chuck, 250 mm diameter - Fixed steady rest - Follow rest - Spindle reduction sleeve - Foot-operated emergency brake - Full-length chip guard - Coolant system - 24V halogen work light - Threading dial indicator - Complete tool kit - EC Declaration of Conformity - User manual - Factory-new machine with warranty Technical specifications: - Swing over bed: 500 mm - Swing over cross slide: 325 mm - Swing in gap: 630 mm - Turning length in gap: 260 mm - Maximum turning length: 1000 mm - Bed: Induction-hardened - Bed width: 330 mm - Chuck diameter: 250 mm - Spindle bore: 80 mm - Spindle mount: D1-8 CAMLOCK - Spindle speed range: 24–1600 rpm - Maximum tool size: 25 x 25 mm - Longitudinal feed range: 0.072–4.038 mm/rev - Cross feed range: 0.036–2.019 mm/rev - Cross slide travel: 305 mm - Compound slide travel: 130 mm - Metric thread pitches: 1–192 mm - Imperial thread pitches: 0.5–28 TPI - Module threads: 1–56 mm - D.P. threads: 8–56 - Tailstock quill diameter: 65 mm - Tailstock quill stroke: 120 mm - Tailstock taper: MT 5 - Digital readout: For 3 axes - Main motor power: 5.5 kW - Coolant pump power: 0.1 kW - Weight: 1700 kg

Būklė: naujas, Gamybos metai: 2026, Technical Specifications TURNING DIAMETER OVER BED: 360 mm TURNING DIAMETER OVER CROSS SLIDE: 150 mm DISTANCE BETWEEN CENTERS: 750 mm SPINDLE SPEED: 100–2000 rpm SPINDLE BORE: 51 mm SPINDLE NOSE: MT5 NUMBER OF TOOLS: 8 TOOL SIZE: 20x20 mm Ihodpfx Ageizw E Aefew TAILSTOCK QUILL: MT3 MAXIMUM TAILSTOCK TRAVEL: 100 mm MOTOR POWER: 5.5 kW DIMENSIONS: 1815 x 1300 x 1600 mm NET WEIGHT: 1300 kg Available Equipment • SINUMERIK 808D control (Polish language) • SIEMENS servo drives • 1 driven tool • HYDRAULIC 3-jaw chuck • 8-position turret head • Set of soft jaws • Hydraulic tailstock • Coolant system • Automatic lubrication system for gearbox and guides • 24V halogen lighting • Technical documentation in Polish • CE declaration Listed price is NET. Transport costs are not included. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Būklė: naujas, Gamybos metai: 2026, Industrial metal lathe CORMAK 460 x 1500 – robust cast iron bed construction, equipped with a 12-speed gearbox and a powerful 5.5 kW/400V induction motor – maximum torque, large spindle bore of 80 mm. Recommended for turning hard steels and mechanical turning. Suitable for various tasks, such as internal and external surface turning, taper turning, polishing, metric and inch threading, drilling, and broaching. Machine Description: Ihodpfjricziox Agfsw - Universal lathe 460 x 1500 CORMAK can be used for many operations such as internal and external turning, taper turning, polishing, metric, inch, module, and DP threading, drilling, and broaching. - The solid cast iron bed construction provides maximum vibration reduction. Additionally, the bed is hardened and precisely ground. An adequate bed width of 300 mm ensures stable and precise working conditions. - Digital readout operates on (3) three axes: longitudinal, cross, and top slide movement. Processed electronic signals from optical scales display axis movement values on the digital screen. - The lathe is fitted with a high-quality, reinforced spindle bearing system. - Optimal performance is ensured by a large 80 mm spindle bore, a 250 mm 3-jaw chuck, and a powerful 5.5 kW motor. - Rapid longitudinal and cross feed system significantly shortens machining times and increases productivity. - Hardened and ground gears in the spindle gearbox – guarantee long-term operational stability. - Equipped with a lead screw and feed shaft for thread cutting and automatic longitudinal and cross feeds. - Easy spindle speed and automatic feed adjustment from the ergonomic control panel on the gearbox. - Capable of machining a wide range of threads without changing the change gears in the quick-change gearbox. Wide threading range: metric (41) 0.1–14 mm, inch (60) 2–112 T.P.I, module (34) 0.1–7 M.P., DP thread (50) 4–112 D.P. Right- and left-hand threading. - Thread chasing dial for precise counting of thread leads. The function is designed to save time, allowing the lead screw nut to be disengaged in a few passes and quickly return the carriage to the starting position manually. - The bed is fitted with a removable gap for machining large-diameter components, e.g. flanges. This lathe model allows machining workpieces up to 690 mm in diameter with the gap bridge removed.

Būklė: naujas, Gamybos metai: 2026, Metal Lathe TYTAN 750 VARIO, 230V with variable spindle speed. Machining parameters: 250 x 750 mm, DC motor: 1.1kW/230V. The lathe is designed for machining external and internal cylindrical surfaces, threading, drilling, countersinking, and reaming. It is typically used in small industrial workshops, repair shops, garages, etc. Main advantages: - Modern DC motor with stepless spindle speed regulation ensures user convenience and reduces calibration time. - LCD display showing spindle speed allows for monitoring and quick adjustment of spindle RPM during cutting and threading operations. - Two spindle speed ranges: low (50-1125) for machining hard steels and high (100-2250) for high-speed precision turning. - Thread cutting: metric – 18 pitches (0.2–3.5), imperial – 21 pitches (8–56); capable of both left- and right-hand thread cutting. - Automatic longitudinal feed offers 6 feed rates (0.07 to 0.40 mm/rev), significantly shortening machining time without compromising work quality when turning long parts. - The machine fully complies with EU directives (CE) as well as Polish regulations and DIN standards. Technical Specifications: 3-jaw chuck: 125 mm Maximum turning diameter over bed: 250 mm Turning diameter over cross slide: 150 mm Turning length between centers: 750 mm Maximum length of workpiece (chuck/tailstock): 700 mm Bed width: 135 mm Tool post dimensions: 65 x 65 x 20 mm Maximum tool size: 12 x 12 mm Spindle bore: 30 mm Spindle taper: MT4 Spindle speed control: stepless (L/H) Spindle speeds: L: 50–1125 / H: 100–2250 rpm Metric threads: (18) 0.2–3.5 mm/rev Imperial threads: (21) 8–56 TPI Longitudinal feed rates: (6) 0.07–0.4 mm/rev Top slide travel: 70 mm Longitudinal travel: 650 mm Ihodpfsw H Rauex Agfew Cross slide travel: 135 mm Tailstock sleeve diameter: 30 mm Tailstock quill travel: 60 mm Tailstock taper: MT2 Motor power S1/S6: 1.1/1.32 kW / 230V Dimensions L/W/H (without base): 1310 x 610 x 490 mm Dimensions L/W/H (with base): 1350 x 560 x 1250 mm Weight (without base): 165 kg Weight (with base): 180 kg Standard Equipment: - 3-jaw chuck (125 mm) - Fixed and traveling steady rest - Change gears - MT2 fixed center - MT4 fixed center - Left and right jaws (1 set) - Grease gun - Chip tray - Chuck key and tool post wrench - Service tool kit - Safety guards compliant with CE standards

Būklė: naujas, Gamybos metai: 2026, TYTAN 750 PRO (VARIO) 400V metal lathe (without base) with stepless spindle speed adjustment. This lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, counterboring, and reaming. It is commonly used in small manufacturing operations, workshops, garages, etc. This is the machine version without a base. The TYTAN 750 PRO universal lathe, with its continuous spindle speed adjustment, is ergonomic and tailored to the needs of the user. The reduced setup time when machining a wide range of part sizes translates into productivity and ease of use. VARIO version – electronic, stepless spindle speed adjustment via a DC motor and voltage controller. This ensures the highest rotational accuracy of the lathe chuck, resulting in improved quality of the machined components. Main advantages: Ihodpfxevvlxlo Agfew - Modern DC motor with smooth spindle speed adjustment provides user convenience and shortens calibration time. - LCD screen with spindle speed display allows monitoring and rapid adjustment of spindle speed when setting cutting and threading modes. - Two spindle speed ranges: low (50-1125 rpm) for machining hard steels and high (100-2250 rpm) for high-speed precision turning. - Thread cutting: metric – 18 pitches (0.2–3.5), imperial – 21 pitches (8–56 T.P.I.), capable of cutting both left-hand and right-hand threads. - Automatic longitudinal feed with 6 feed rates (0.07 to 0.40 mm/rev) considerably shortens machining time without compromising quality when turning long parts. - The machine is fully compliant with EU directives (CE) as well as Polish standards and DIN norms. Technical specifications: - 3-jaw chuck: 125 mm - Max. turning diameter over bed: 250 mm - Turning diameter over carriage: 150 mm - Turning length between centers: 750 mm - Max. length of installed workpiece (chuck/center): 700 mm - Bed width: 135 mm - Spindle bore: 27 mm - Spindle taper: MT4 - Tool post dimensions: 65 x 65 x 20 mm - Maximum tool size: 12 x 12 mm - Top slide travel: 70 mm - Cross slide travel: 135 mm - Longitudinal travel: 650 mm - Spindle speed adjustment: stepless (L/H) - Spindle speed: L: 50-1125 / H: 100-2250 rpm - Number and range of metric threads: (18) 0.2–3.5 mm/rev - Number and range of imperial threads: (21) 8–56 T.P.I. - Number and range of longitudinal feeds: (6) 0.07–0.4 mm/rev - Tailstock quill diameter: 30 mm - Tailstock quill travel: 60 mm - Tailstock quill taper: MT2 - Motor power S1/S6: 1.1/1.32 kW - Dimensions (L/W/H, without base): 1310 x 610 x 480 mm - Weight (without base): 165 kg

Būklė: naujas, Gamybos metai: 2026, Universal Metal Lathe CORMAK 330x700 with Stand, 230V, equipped with a 12-speed gearbox and 1.1 kW/230V induction motor (constant speed) – maximum torque. Recommended for hard steel turning and mechanical turning operations. Suitable for a range of tasks including internal and external turning, taper turning, polishing, metric and imperial threading, drilling, and broaching. This is a semi-professional model, ideal for single-unit and small batch production. Machine version with stand. Machine description: - Fully compliant with EU Directives (CE), Polish regulations, and DIN standards. Technical Data: - 3-jaw chuck: 160 mm - Max. turning diameter over bed: 330 mm - Max. turning diameter over carriage: 220 mm - Max. workpiece length between centers: 700 mm - Max. length of installed workpiece: 650 mm - Bed width: 160 mm - Spindle bore: 38 mm - Spindle taper: MT5 - Tool post dimensions: 75 x 75 x 20 mm - Top slide travel: 100 (0.05) mm - Cross slide travel: 150 (0.1) mm - Longitudinal slide travel: 620 (0.5) mm - Spindle speeds (12): 65, 90, 120, 160, 220, 300, 380, 500, 640, 850, 1100, 1650 rpm - Number/range of metric threads: (17) 0.5-4 mm - Number/range of imperial threads: (26) 9-40 TPI - Longitudinal auto feed rates: 0.105–1.396 mm/rev - Cross auto feed rates: 0.022–0.296 mm/rev - Tailstock quill diameter: 40 mm - Tailstock quill travel: 70 (0.025) mm - Tailstock quill taper: MT2 - Motor power: 1.1 kW / 230V - Dimensions L/W/H (with stand): 1500 x 730 x 1200 mm - Weight (with stand): 320 kg Standard Equipment: - Set of 8 turning tools 16x16 mm with brazed carbide inserts - Lathe stand - 3-jaw chuck 160 mm - Reversible jaws - Fixed centre: MT3 - Change gears - Oil can - Chuck and tool post key - Maintenance tool kit - Safety guards compliant with CE standards Ijdsmtyi Nepfx Agfohw - Operating manual in Polish - CE Declaration of Conformity The listed price is NET. Price does not include transport costs. For further information, please contact us by phone or email. We invite you to view our full offer on our website.

Būklė: naujas, Gamybos metai: 2026, Efficient flat-bed lathe with versatile applications for both series and small-batch machining. The machine supports external, internal, and spherical turning, as well as threading operations. Control features include built-in fixed cycles for cross turning, conventional turning, taper turning, threading, parting-off, and contouring, which greatly simplify machine programming and reduce processing time. Technical specifications: Maximum turning diameter over bed: 400 mm Maximum turning diameter over carriage: 210 mm Distance between centers: 1000 mm Ihsdjv A S N Depfx Agfjw Spindle speed range: 0-2000 rpm Spindle bore: 52 mm (optionally 72 mm) Spindle taper: Morse 6 Number of tool post positions: 4 (optionally: 6, 8) Maximum tool shank size: 20x20 mm (optionally 25x25 mm) Minimum increment setting (X/Z axes): 0.001 mm / 0.001 mm X-axis (longitudinal) rapid traverse: 8 m/min Z-axis (cross) rapid traverse: 10 m/min Tailstock quill taper: Morse 5 Maximum quill travel: 120 mm Main drive motor power: 5.5 kW (X) feed motor: 6 Nm (Z) feed motor: 6 Nm Package dimensions (mm): 2640 x 1500 x 1770 mm Net weight: 2000 kg

Būklė: naujas, Gamybos metai: 2026, Technical specifications SWING OVER BED DIAMETER: 360 mm SWING OVER CROSS SLIDE DIAMETER: 150 mm DISTANCE BETWEEN CENTERS: 750 mm SPINDLE SPEED: 100–2000 rpm SPINDLE BORE: 47 mm SPINDLE NOSE: MT5 NUMBER OF TOOLS: 8 TOOL SIZE: 20x20 mm TAILSTOCK QUILL: MT3 MAX. TAILSTOCK TRAVEL: 100 mm MOTOR POWER: 3.7 kW DIMENSIONS: 1815 x 1300 x 1600 mm NET WEIGHT: 1300 kg Available equipment: - SINUMERIK 808D control system in Polish - SIEMENS servo drives - 3-jaw hydraulic chuck - 8-position turret head - Set of soft jaws - Hydraulic tailstock - Coolant system - Automatic lubrication system for gearbox and guides - 24V halogen lighting - Technical documentation (DTR) in Polish - CE Declaration The listed price is NET. Transport costs are not included. Ihodpef Ey Umjfx Agfsw For further information, please contact us by phone or email. Please visit our website to see our full offer.

Būklė: naujas, Gamybos metai: 2026, This series of lathes can be used for a wide range of machining operations such as internal and external turning, taper turning, polishing, threading (metric, inch, modular, and DP), drilling, and internal broaching. Machine Features: - The 410x1000 CORMAK series lathe is suitable for diverse applications, including internal and external turning, taper turning, polishing, metric, inch, modular, and DP threading, drilling, and broaching. - Standard equipment includes a full 3-axis digital readout system. - Modern, high-precision spindle bearings. - Large spindle bore: 52 mm. - Heavy-duty cast-iron bed, ground and induction-hardened for durability and precision. - Gear transmission with heat-treated and finely ground gears. - Increased machining capacity thanks to removable bridge segment. - Safety guards compliant with the latest standards. - Machining accuracy: roundness deviation below 0.01 mm, cylindrical deviation not greater than 0.02 mm over 200 mm measurement; outstanding surface finish. - Equipped with a mechanical foot brake. - Option to retrofit the lathe with a taper turning attachment. Technical Specifications: SWING OVER BED: 410 mm SWING OVER CROSS SLIDE: 255 mm SWING IN BED GAP: 580 mm TURNING LENGTH IN GAP: 190 mm BETWEEN CENTRES: 1000 mm (optional 1500 mm) CENTRE HEIGHT: 205 mm BED: induction-hardened BED WIDTH: 250 mm SPINDLE BORE: 52 mm SPINDLE NOSE: D1-6 SPINDLE TAPER: No. 6 Morse Isdpfx Ageiz Tf Sefohw SPINDLE SPEED RANGE: (16) 45–1800 rpm MAX TOOL SIZE: 20 x 20 mm LONGITUDINAL FEED RANGE: (17) 0.05–1.7 mm/rev CROSS FEED RANGE: (17) 0.025–0.85 mm/rev METRIC THREAD PITCHES: (42) 0.2–14 mm INCH THREAD PITCHES: (45) 2–72 TPI MODULE THREAD: 0.3–3.5 MP (18) DP THREAD: 8–44 DP (21) TAILSTOCK SLEEVE DIAMETER: 50 mm TAILSTOCK SLEEVE TRAVEL: 120 mm TAILSTOCK SLEEVE TAPER: MT 4 DIGITAL READOUT: Full 3-axis MAIN MOTOR POWER (S1/S6): 2.2 kW / 3.3 kW COOLANT PUMP MOTOR: 0.1 kW OVERALL DIMENSIONS: 1940 x 850 x 1320 mm WEIGHT (GROSS): approx. 1590 kg Standard Equipment: - 3-jaw chuck (200 mm) - 4-jaw chuck (250 mm) - 3-axis digital readout - Face plate - Fixed steady rest - Travelling (follower) steady rest - Spindle reducing sleeve - Live centre - Change gears for metric/inch threading - Coolant system - Lighting system - Threading dial indicator - Equipped with CE-compliant electromechanical foot brake - Chip tray - Complete set of service tools - Latest CE-compliant safety guards - Comprehensive operation manual in Polish - EC/CE declaration of conformity - Factory new machine with full warranty For more information, please visit our website.

Būklė: naujas, Gamybos metai: 2026, Main advantages of the CORMAK 660 x 2000 universal lathe (C6266/2000): - Electromagnetic foot brake ensures the highest safety standards and significantly reduces downtime, enabling rapid and reliable machine stoppage. - Rapid longitudinal and cross feeds, significantly reducing tool travel time, increasing processing efficiency, and operator comfort. - Versatile applications: external and internal turning, taper turning, threading (metric, imperial, module, DP), drilling, broaching, and polishing. - Hardened and ground cast iron bed with 400 mm width, ensuring maximum vibration damping and high machining accuracy. - Large spindle bore Ø105 mm and D1-8 fitting, allowing the machining of shafts and components with large diameters. - High drive power – spindle motor 7.5/9 kW delivers stable operation during heavy-duty cutting tasks. - Wide thread range without the need to change gear wheels – saves time and increases production flexibility. - 3-axis digital readout (DRO) enhancing setup accuracy and control over the turning process. Standard equipment: - 3-axis digital readout (DRO) - 315 mm 3-jaw lathe chuck - 400 mm 4-jaw lathe chuck - 400 mm faceplate - Fixed and traveling steady rests - Coolant system and work light - User manual (PL) and CE declaration Ihedpoyk Dabjfx Agfsw Optional equipment: - Lathe tool set 25 x 25 mm – 7 pcs - Precision live centre MK5 - Grinding attachment for shafts and bores - Cutting fluids and lubricating oils Technical specifications: Swing over bed: Ø 660 mm Swing over cross slide: Ø 455 mm Swing over gap (diameter × width): 885 × 170 mm Centre height: 330 mm Distance between centres: 2000 mm Bed width: 350 mm Max. tool cross-section: 25 × 25 mm Cross slide travel: 355 mm Top slide travel: 130 mm Spindle bore: Ø 105 mm Spindle nose: D1-8 Spindle taper: Ø 113 mm (1:20) Number of spindle speeds: 12 Spindle speed range: 25–1500 rpm Leadscrew diameter and pitch: Ø 40 mm × 6 mm Imperial thread range: 2–112 tpi (60 steps) Metric thread range: 0.2–14 mm (47 steps) DP threads: 4–112 DP (50 steps) Module threads: 0.1–7 MP (39 steps) Longitudinal feed: 0.059–1.646 mm/rev (35 steps) Cross feed: 0.020–0.573 mm/rev (35 steps) Tailstock quill total travel: 180 mm Tailstock quill diameter: Ø 75 mm Tailstock quill taper: Morse taper no. 5 Spindle drive motor: 7.5 kW (10 HP) 3 PH Coolant pump motor: 0.1 kW (1/8 HP) Required installation space (L × W × H): 334 × 115 × 151 cm Packing dimensions (L × W × H): 340 × 115 × 182 cm Weight: 3200 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1986, Sunkioji tekinimo staklės, tekinimo staklės, tekinimo suolas, kreipiančioji ir traukiančioji velenų tekinimo staklės, kreipiančioji ir traukiančioji velenų tekinimo suolas -Gamintojas: Knuth, kreipiančioji ir traukiančioji velenų tekinimo suolas tipas PICATOR 215/1250 -Staklių lova: grūdinta -Tekinimo ilgis: 1260 mm Iodewv Uvfspfx Agfshw -Tekinimo skersmuo virš lovos: 470 mm -Tekinimo skersmuo be tiltelio lovos: 600 mm -Tekinimo skersmuo virš suportą: 280 mm -Veleno skylė: Ø 55 mm -Veleno sūkiai: 36 - 2000 aps./min. -Pleistinė griebtuvė: Forkardt Ø 200 mm -Priekinio centro kotas: MK4 -Variklio galia: 3,6 kW -Matmenys: 1020/2210/A1190 mm -Svoris: 1200 kg