Horizontalių plokščių šlifavimo staklės, šlifavimo ilgis 400–699 mm pirkti naudotą (219)

Būklė: geras (naudotas), Gamybos metai: 1980, veikimo valandos: 15 393 h, Funkcionalumas: visiškai funkcionalus, šlifavimo ilgis: 600 mm, Please provide your offer price. Sales only within Europe, including Turkey. Price excluding packaging; Delivery terms: FCA (machine location) ===== For technical specifications, please refer to the attached handout. Guedjxru H Tepfx Ap Ijc All warranty and guarantee rights are excluded. We do not assume any responsibility for the accuracy of the technical data and year of manufacture, the completeness of accessories and tool equipment, or compliance with all safety and environmental protection requirements specified in accident prevention regulations. No sales to private individuals.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, šlifavimo ilgis: 600 mm, šlifavimo plotis: 250 mm, šlifavimo disko skersmuo: 250 mm, JUNG JF520 / JF525 SPM-X mechanically, geometrically, and electrically overhauled according to JUNG’s new machine protocol with a new SIEMENS control system (12" Touch OP) incorporating our 25 years of experience in the overhaul of JUNG machines - new control cabinet with holding force regulation and thyristor control for main spindle motor - control system upgrade with 12" SIEMENS touch-OP cycle control and highly intuitive operator panel - remote maintenance module available as an option - plain-text fault display (multilingual) - electromechanical stepper motor infeed with programmable automatic retraction - roughing/finishing infeed - spark-out strokes selectable in advance - dressing compensation - plunge grinding cycles Guedpfx Ajbwl Uhop Isc - automatic central lubrication - all numerical values (infeed) and on/off functions (such as hydraulics and coolant) can be set directly via touch panel - all analog functions such as spindle speed, holding force, cross feed speed, and grinding functions are directly accessible to the operator via rotary and toggle switches - comes with 12 months warranty Maximum magnet size: 600 x 200 mm (Standard: 500 x 200 mm) Maximum grinding area: 600 x 250 mm Delivery time: approx. 10–12 weeks We are happy to accept your used JUNG grinding machine in part exchange

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3806, šlifavimo ilgis: 600 mm, šlifavimo plotis: 250 mm, šlifavimo disko skersmuo: 250 mm, šlifavimo veleno greitis: 3 000 aps./min, galia: 3,5 kW (4,76 AG), Įranga: sūkių greitis be galo kintamas, JUNG JF520 SPM - remontuota dirbtuvėse Mechaniniu / geometriniu ir elektriniu požiūriu kapitališkai suremontuota 2007 m. Mechaniškai ir geometriškai iš dalies suremontuota 2025 m., pilnai veikianti Susidėvėjusios dalys pakeistos Geometrija atnaujinta pagal JUNG naujų staklių protokolą - Šlifavimo plotas: 600 x 250 mm - Žingsninio variklio padavimas - 3 ašių RSF skaitmeninis ekranas - Apdirbimo matmenų kompensavimas - Magnetinės traukos reguliavimas - automatinis centralizuotas tepimas - naudota magnetinė spaudimo plokštė - naudotas popierinės juostos filtras Guedpfxewz Hf Ns Ap Ioc 6 savaičių dalių garantija Pristatymo laikas: trumpas Mielai priimsime jūsų naudotą JUNG šlifavimo staklę kaip dalinį mokėjimą.

Būklė: naudotas, Gamybos metai: 1995, Table size (width): 800 mm Table size (depth): 350 mm Dimensions (length/width/height): 4600 x 3200 x 2500 mm Machine weight approx. 4.5 t Guodswp Tuyjpfx Ap Iec

Būklė: naudotas, Gamybos metai: 2000, Grinding length: 600 mm Grinding width: 300 mm Magnetic chuck: 600 x 250 mm Guedew Hg Uzopfx Ap Ioc Grinding wheel diameter: 220–300 mm Weight: 2,200 kg

Būklė: naudotas, Gamybos metai: 1975, Technical specifications: Grinding length: 600 mm Grinding width: 300 mm Workpiece height: 450 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Space requirement approx.: 2.8 x 3.0 x 2.0 m Grinding spindle speed: 1440 / 2905 rpm with magnetic chuck 600 x 200 mm automatic vertical feed Godpfx Ajvb Dmlop Ijuc

Būklė: naudotas, Gamybos metai: 1985, Grinding length: 600 mm Grinding width: 200 mm Total power requirement: 7.5 kW Machine weight approx. 2.3 t O F F E R We can offer you, subject to prior sale and errors excepted, from stock on a non-binding basis: JUNG Horizontal Precision Surface & Profile Grinding Machine with Microprocessor Control Model: JF 520 MS Year of manufacture: 1985 2225 ----- Max. grinding length (table longitudinal travel): 600 mm Max. grinding width (cross travel): 200 mm Max. grinding height under the wheel approx.: 230 mm Max. distance table to spindle centre: 500 mm Magnetic chuck size: 500 x 200 mm Gusdpfjwd Tx Uex Ap Ijc Max. table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. vertical feed grinding head: 500 mm/min Grinding wheel dimension: 250 x 25 x 50.8 mm Max. peripheral speed (ceramic): 35 m/s Grinding spindle speed, infinitely variable: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total connected load: approx. 7.5 kW - 400 V - 50 Hz Weight: approx. 2,300 kg Accessories / Special Equipment: • Microprocessor program control (SIEMENS) with easy screen display. The program sequences are set via decade switches and stops (with vernier) and monitored on the screen. • Programs: plunge grinding with/without cross positioning, surface grinding with step-over or continuous cross feed, creep feed grinding upcut or downcut with/without cross positioning. All programs with automatic roughing, finishing, spark-out cycles, and automatic retraction. • Automatic straight line dressing device AF 65 S with automatic dressing value compensation and automatic speed adjustment for constant cutting speed (with display) • DIAFORM – grinding wheel profiling device mounted above the grinding wheel • Electrically controlled creep feed device with feed rate and motor load display • Short stroke device for controlling table reversal and table clamping (cross) • Swivelling JUNG sine magnetic chuck, 450 x 180 mm, mounted. Separate swivelling sine magnetic chuck 350 x 175 mm, fine-pole with stop • Coolant system with paper band filter, additional accessories, operating manual Condition: Very good condition with accuracy protocol by JUNG technician! Please click here for a video of the machine: Delivery: ex stock, immediate availability, FCA Metzingen Payment: strictly net - upon receipt of invoice

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Grinding length 500 mm Grinding width 250 mm O F F E R We can offer you, subject to prior sale and errors excepted, from stock and without obligation: ABA Universal Surface Grinding Machine "Made in Germany" Model easyGrinder 5 Year of manufacture 2015 _____ Max. grinding length (table longitudinal travel 600 mm): 500 mm Max. grinding width (cross travel max. 300 mm): 250 mm Grinding height under wheel with / without magnetic chuck: 400 / 420 mm Max. vertical travel: 550 mm Distance table – spindle center min. / max.: 100 / 650 mm Magnetic chuck size: 500 x 250 mm Max. table load: 400 kg Table speed: 2 - 30 m/min Max. cross/vertical speed: 500 / 1,700 mm/min Grinding wheel dimension: 300 x 50 x 76.2 mm Max. spindle speed: 1,450 rpm Grinding spindle drive approx.: 5.5 kW Total power approx.: 8 kW – 400 V – 50 Hz Weight approx.: 3,000 kg Accessories / Special equipment: • ABA proprietary program control with touchscreen colour display for surface and plunge grinding. Intuitive operation through graphical input and teach-in function for both manual and automatic grinding cycles, especially suitable for workshop use! • Portable control panel, allows parameter changes even in automatic mode • Table movement by timing belt drive – ideal for fast machining of smaller workpieces • Infeed (Y) via ball screw, linear guides in all axes. • Wheel dresser mounted on the table with automatic dressing cycle and compensation included. • BRAILLON magnetic chuck EPEFINE2 500 x 250 mm, fine pole pitch and adjustable holding force. • Fully enclosed work area with automatic safety-interlocked sliding doors. • Wet grinding system with freestanding belt coolant filter and oil mist extraction. • Modern LED lighting, various accessories, operating manuals. • Compact design: 2,130 x 1,780 x 2,300 mm (plus oil mist extractor). Condition: Very good! Suitable for all grinding applications! Guodpfxoxy S Dxs Ap Isc Please click here for a video of the machine: Delivery: ex stock, immediate availability, FCA Metzingen Payment: strictly net – upon receipt of invoice Always a large selection of grinding machines in stock – please send us your requirements!

Būklė: labai geros būklės (naudotas), Gamybos metai: 1965, Šlifavimo ilgis: 600 mm Gedexy S D Ejpfx Ap Ijuc Šlifavimo plotis: 250 mm Aprašymas bus pateiktas vėliau!

Būklė: naudotas, Gamybos metai: 1969, Grinding length 500 mm Grinding width 200 mm Workpiece height 250 mm Total required power 5.5 kW Machine weight approx. 2500 kg Space requirements approx. m J U N G Horizontal Precision Surface and Profile Grinding Machine Model HF 50 RD Year of manufacture approx. 1969 Machine No. 4082 _____ Maximum grinding length 500 mm Maximum grinding width 200 mm Table size 600 x 200 mm Table speed 1 – 20 m/min Working height under grinding wheel approx. 350 mm Grinding wheel size 225 x 25 x 51 mm Grinding wheel speed, infinitely variable 1,000 - 4,500 rpm Vertical infeed 0.001 - 0.01 mm/stroke Grinding spindle drive, continuously adjustable 0.5 to 1.5 kW Total drive power approx. 6 kW - 380 V – 50 Hz Weight approx. 2,500 kg Guedpfx Apet Hwzis Isc Accessories / Special Equipment • This version, due to the infinitely variable speed range, is particularly suitable for grinding high-alloy tool steels. • Automatic infeed of the grinding carriage for surface and profile grinding operations with automatic infeed shut-off via dial indicator, as well as with dial indicator holder and dial indicator for height control. • Machine can be set for standard grinding operations with and without infeed, either with continuous cross movement or with table reversal, or for plunge grinding operations without cross adjustment. • Manual straight dresser mounted above the grinding wheel • Mounted permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separately standing wet grinding unit with coolant tank and belt filter • Separate converter cabinet for infinitely variable speed regulation and display of cutting speed. • Approx. 3 flanges with and without grinding wheels, rapid grinding head traverse, Condition : good – ready for demonstration under power, partially overhauled by specialized company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1982, šlifavimo ilgis: 600 mm, šlifavimo plotis: 550 mm, bendras aukštis: 2 490 mm, padavimo ilgis X ašis: 600 mm, padavimo eiga Y ašimi: 470 mm, padavimo ilgis Z ašis: 600 mm, šlifavimo aukštis: 400 mm, šlifavimo disko skersmuo: 400 mm, stalo ilgis: 1 100 mm, stalo apkrova: 400 kg, stalo plotis: 450 mm, šlifavimo ratuko plotis: 100 mm, veleno greitis (maks.): 1 400 aps./min, veleno greitis (min.): 1 400 aps./min, bendras svoris: 5 300 kg, X ašies eiga: 600 mm, Y ašies eiga: 470 mm, Z ašies eigos atstumas: 600 mm, sukimosi greitis (maks.): 1 400 aps./min, sukimosi greitis (min.): 1 400 aps./min, šlifavimo veleno greitis: 1 400 aps./min, disko skersmuo: 400 mm, reikalingas aukštis: 2 490 mm, We offer this used ELB-Schliff Oprimal 3 ND surface grinding machine, year of manufacture 1982. Maximum grinding length: 600 mm Maximum grinding width: 550 mm Working height with new grinding wheel: 400 mm Working height with worn grinding wheel: 600 mm Spindle taper ratio: 1:5 Vertical manual movement of grinding spindle: 600 mm Horizontal manual movement of grinding spindle: 470 mm Swivel range of grinding spindle: 1° Table clamping surface: 1100 x 450 mm Table short stroke: 80 mm Number of T-slots: 1 T-slot width: 16H7 mm Cross feed table: 470 mm Longitudinal feed table: 600 mm Table load capacity: 400 kg Grinding wheel outside diameter: 400 mm Grinding wheel bore diameter: 127 mm Grinding wheel width: 100 mm Recess 1 diameter: 190 mm Recess 1 thickness: 20 mm Recess 2 diameter: 190 mm Recess 2 thickness: 30 mm Machine height: 2.49 m Weight: 4700/5300 kg Direct grinding spindle speed: 1400 rpm Continuous feed rate of grinding spindle carriage: 1.2 m/min Intermittent feed rate of grinding spindle carriage: 3–60 mm Hydraulic table traverse speed: 1–30 m/min Gusdpfoyrn Sdex Ap Ijc If you have any questions or require further information, please feel free to send us a message or call us.

Būklė: naudotas, Gamybos metai: 1977, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7570, 1 naudotas: JUNG plokštuminis ir profilių šlifavimo staklės • Modelis: HF 50-R(D) • Staklių nr.: 7570 • Pagaminimo metai: apie 1977, atnaujinta 06-1998 • Šlifavimo plotas: 500 x 200 mm • Šlifavimo diskas: maks. 250 x 25 x 51 mm PRIEDAI: Elektromagnetinė prispaudimo plokštė 450 x 180 mm 1 tiesinimo įrankis šalia veleno galvos 1 šlifavimo disko laikiklis su disku Gjdpow R Tqpefx Ap Ieuc 1 universalus popierinės juostos filtras 1 dažnio keitiklis greičio reguliavimui Reguliuojamos kojelės

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, INFORMACIJA APIE PRECIZINĮ PLOKŠČIAGRINDŽIAVIMO STAKLES Gamintojas: JUNG Modelis: JF 520 Metai: 1997 Staklių svoris: 2200 kg Bendras svoris: 2600 kg Vieta: Haiger Kaina: 24 000 € be PVM. Aprašymas: Serijos Nr. 3821, skaitmeninis ekranas (Heidenhain), mikroprocesorinis valdymas, profilio formavimo įrankis (Diaform), staklių apšvietimas, aušinimo skysčio sistema, magnetinis prispaudimo stalas. Techniniai duomenys: Tvirtinimo paviršius (I x P, mm): 600 x 200 Apdirbamas paviršius (I x P, mm): 600 x 250 Maks. magneto dydis, mm: 600 x 200 Gujdpfxexqa I Ts Ap Ijc Didžiausi šlifavimo disko matmenys, mm: 225 x 25 x 51 Atstumas nuo stalo iki ašies vidurio, mm: 350 (+50) Stalo išilginis suvartymas, m/min: 1 – 20 Lėtasis bėgimas, mm/min: 0 – 500 Šlifavimo ašies greitis, aps./min: 800 – 4200 Galia kW (lėtu režimu): 2,2 (3,5)

Būklė: naudotas, Techninės detalės: Magnetinė plokštė: 900 x 450 mm Heidenhain matavimo sistema Automatinis padavimas Skersinis judėjimas elektrinis ir rankinis su rankenėle Gujdpoyhwhwjfx Ap Isc Vertikalus judėjimas elektrinis ir rankinis su rankenėle Išilginis judėjimas hidraulinis ir rankinis su rankenėle Šlifavimo velenas su slydimo guoliais

Būklė: labai geros būklės (naudotas), Grinding area 600 x 460 mm Grinding wheel diameter 250 mm Magnetic chuck 500 x 250 mm Gujdpfx Apjmmdhrs Iec Various accessories MARCELS MASCHINEN CH

Būklė: geras (naudotas), Grinding area 400 x 200 x 410 mm Grinding wheel size 225 x 25 x 50.8 mm Gusdpfx Apewufkqe Ioc Magnetic chuck 350 x 150 mm MARCELS MASCHINEN CH

Būklė: naujas, Gamybos metai: 2026, šlifavimo ilgis: 560 mm, šlifavimo plotis: 240 mm, bendras aukštis: 2 150 mm, bendras ilgis: 2 250 mm, bendras plotis: 1 720 mm, ruošinio svoris (maks.): 180 kg, X ašies padavimo greitis: 25 m/min, šlifavimo disko skersmuo: 220 mm, atstumas nuo stalo iki veleno centro: 450 mm, stalo ilgis: 508 mm, įvesties srovės tipas: trifazis, stalo plotis: 200 mm, šlifavimo ratuko plotis: 20 mm, bendras svoris: 1 800 kg, sukimosi greitis (maks.): 2 850 aps./min, galia: 5 kW (6,80 AG), įėjimo įtampa: 400 V, Įranga: dokumentacija / vadovas, Siemens PLC control Touchscreen Electronic handwheel Digitally controlled automatic vertical feed with servomotor SINO 2-axis digital readout Electro-magnetic clamping plate Cooling system Gedpfxsykvkxo Ap Iouc LED lighting Grinding wheel Flange Central oil lubrication Table size ----- 200 x 508 mm T-slot width / number ----- 14 / 1 mm Electro-magnetic clamping plate ----- 200 x 460 mm Max. longitudinal table travel ----- 560 mm Max. transverse table travel ----- 240 mm Table speed, hydraulic ----- 5~25 m/min Max. spindle-table distance ----- 450 mm Max. permissible workpiece weight ----- 180 kg Grinding wheel ----- 220 × 20 × 31.75 mm Transverse travel Automatic cross feed ----- 0.2~8 mm / stroke Rapid traverse, cross ----- 990 mm/min Cross feed per handwheel revolution ----- 4 mm/rev Handwheel division ----- 0.02 mm Vertical travel Automatic vertical feed ----- 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm Rapid traverse, vertical ----- 480 mm/min Vertical feed per handwheel revolution ----- 1 mm/rev Handwheel division ----- 0.005 mm Main motor ----- 2.2 kW Hydraulic pump motor ----- 0.75 kW Vertical feed motor ----- 0.5 kW Weight ----- 1800 kg Machine dimensions ----- 2250 x 1720 mm

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2025, šlifavimo ilgis: 400 mm, šlifavimo plotis: 200 mm, JUNG JF 415 / JF 420 mechanically, geometrically and electrically overhauled according to the JUNG new-machine protocol fitted with new SIEMENS control system (12" touch OP), incorporating our 25 years of experience in the refurbishment of JUNG machines - New control cabinet with magnetic force regulation and thyristor control for the main spindle motor - Control system modernization with 12" SIEMENS Touch OP cycle control with a very user-friendly control panel Guedpfxsc S Agvo Ap Iec - Remote maintenance module optional - Plain-text error display (multilingual) - Electromechanical stepper motor feed with programmable automatic retraction - Roughing/finishing feed - Pre-selectable sparking-out strokes - Dressing compensation - Plunge grinding cycles - Automatic central lubrication - All numerical values (feeds) and on/off functions, such as hydraulics and coolant, can be set via the touch panel - All analog functions such as speed, holding force, crossfeed speed, and grinding functions are directly accessible to the operator via rotary and rocker switches - Supplied with 12 months warranty Grinding range: 400 x 200 mm Delivery time: by agreement We are happy to accept your used JUNG grinding machine as a trade-in

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, šlifavimo ilgis: 600 mm, šlifavimo plotis: 250 mm, šlifavimo disko skersmuo: 225 mm, JUNG HF50 mechanically, geometrically and electrically overhauled according to the JUNG new-machine protocol with 12 months warranty max. magnetic chuck size: 600 x 200 mm (standard 500 x 200 mm) max. grinding area: 600 x 250 mm Guedpfxjbwl Ube Ap Isc Delivery time: to be agreed upon We are happy to accept your used JUNG grinding machine in part exchange

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, šlifavimo ilgis: 600 mm, šlifavimo plotis: 300 mm, šlifavimo disko skersmuo: 300 mm, JUNG JF625 / JF630 mechanically, geometrically, and electrically completely overhauled according to the JUNG new machine protocol with new SIEMENS control system (12" touch operation panel) incorporating our 25 years of experience in overhauling JUNG machines - new control cabinet with magnetic chuck force control and thyristor control for main spindle motor - control system modernization with 12" SIEMENS touch-operation panel, user-friendly cycle programming and clearly-arranged control panel - remote maintenance module available as an option - clear text error display (multi-language) - new control cabinet with magnetic chuck force control and thyristor control for main spindle motor - electromechanical stepper motor infeed with programmable automatic retraction - roughing/finishing infeed - selectable spark-out strokes - dressing compensation - plunge grinding cycles Guodpfx Aodrmlnop Ioc - automatic central lubrication system - All numeric values (infeed) and on/off functions such as hydraulic and coolant can be set via touchscreen - All analog functions, e.g. spindle speed, magnetic holding force, cross feed speed, and grinding functions are directly accessible to the operator via rotary and toggle switches - with 12 months warranty Grinding area: 600 x 250 mm Delivery time: by arrangement

Gamybos metai: 2023, būklė: visiškai atnaujintas (naudotas), JUNG HF50 SPM mechanically and geometrically overhauled according to JUNG new machine protocol Electrical overhaul approx. 2010 / function-tested and wear parts replaced (in new control cabinet) newly painted Gujdpfx Apjhcw U Ue Iec - Stepper motor feed - 3-axis digital readout - Dressing compensation - Holding force regulation - used magnetic chuck - Paper band filter optional 12-month warranty on mechanics and geometry and 6 weeks parts warranty on electrical components max. magnet size: 600 x 200 mm (standard 500 x 200 mm) max. grinding range: 600 x 250 mm Delivery time: by arrangement / subject to prior sale We will gladly accept your used JUNG grinding machine as a trade-in

Būklė: geras (naudotas), Surface grinding machine GEIBEL & HOTZ FS 40 Primus SA, No. 920287, clamping surface 400 x 200 mm Gedpfx Aeunw Ilop Ieuc

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, šlifavimo ilgis: 600 mm, šlifavimo plotis: 300 mm, bendras aukštis: 2 300 mm, bendras ilgis: 2 450 mm, bendras plotis: 3 000 mm, padavimo ilgis X ašis: 650 mm, padavimo eiga Y ašimi: 730 mm, padavimo ilgis Z ašis: 340 mm, ruošinio svoris (maks.): 400 kg, šlifavimo aukštis: 420 mm, X ašies padavimo greitis: 20 m/min, Y ašies padavimo greitis: 1 m/min, padavimo greitis Z ašis: 1 m/min, šlifavimo disko skersmuo: 305 mm, atstumas nuo stalo iki veleno centro: 580 mm, stalo greitis: 20 000 mm/min, stalo apkrova: 400 kg, įvesties srovės tipas: trifazis, šlifavimo ratuko plotis: 25 mm, veleno greitis (maks.): 2 100 aps./min, veleno greitis (min.): 1 aps./min, bendras svoris: 2 300 kg, atstumas nuo stovo iki veleno centro: 30 mm, šlifavimo veleno variklio galia: 7 500 W, Pilnai automatinis plokščiagrandinis šlifavimo staklės su valdymu per jutiklinį ekraną. Paprastas, aiškus valdymas. Šlifavimo ciklas apima grubų, tikslų apdorojimą ir kibirkščiavimą. Galimas tarpinis kibirkščiavimas. Pasirenkamai su kompensacine nubrėžimo įranga. Staklės gali būti apžiūrėtos įjungtos ir greitai pristatomos. Daugiau informacijos suteiksime pagal užklausą. Godpfx Aoyk Un Nsp Ijuc

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1982, Grinding length: 500 mm Grinding width: 350 mm Grinding height: 375 mm Godpeu Ag Aijfx Ap Ijuc Grinding spindle drive: 3.7 kW Table speed: 2–28 m/min Automatic cross feed: 1–60 mm/stroke Automatic vertical feed: 0.002–0.06 mm/min Grinding wheel dimensions: 300 x 76.2 x 50 mm Machine weight approx. 2,800 kg

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, stalviršio matmenys: 830mm x 200mm magneto matmenys: 600mm x 200mm šlifavimo akmens matmenys: 250mm ėjimai x:720mm y:250mm z:320mm automatiniai padavimai x ir y ašyse z ašies aukštis reguliuojamas elektra aukštis:1600mm x ilgis:1800mm x gylis 1500mm svoris: 1700kg Finansinė informacija PVM/marža: Gusdpfxoxg Td To Ap Isc Marža: Rodoma kaina su PVM (PVM įmonėms neatskaitomas)