Tikslaus paviršiaus šlifavimo staklės

JUNG HF 50 SPM

Būklė: naudotas, Gamybos metai: 1980, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 290 mm Machine from the Physikalisch-Technische Bundesanstalt - Geometrically reconditioned - Electrical system checked, fully functional, relevant components replaced - All wear parts replaced - Color: light grey, paint condition good Equipment: Electromagnetic chuck 500x200 mm Grinding spindle overhauled 2-axis digital readout for Y and Z axes Automatic feed for Y and Z axes Y-axis with zero shut-off Manual hand dresser Infinitely variable grinding wheel speed Constant V-belt despite wheel wear Paper band filtration system, used Max. height with 250 mm grinding wheel diameter: 290 mm Max. grinding area: 600x250 mm Max. load including magnet: 100 kg Warranty: 1 year on geometry and electronics throughout Germany Delivery: ex works Availability: immediately Payment: prior to collection Acceptance at our facility Tedpfxewb Hygj Aa Dea Shipping as specified by the customer

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, The granulate mixer is available in 6 versions: Execution possible in stainless steel or painted steel: Technical specifications: MV 2 Tjdpfx Aod R Atrea Doa The MV 2 ensures thorough mixing of the entire plastic granulate, thanks to the forced guidance through the screw sleeve. Container capacity: 120 kg / 200L L x W: 700 mm x 700 mm x Height: 1050 mm / 1250 mm - Removable screw - Mixing time control - Extraction device - 1 discharge outlet - Mobile base frame with 100 mm castor wheels, all with parking brakes.

Būklė: naujas, Gamybos metai: 2024, veleno ilgis po galvute: 80 mm, sriegio ilgis: 55 mm, važiuojamoji greitis (maks.): 480 mm/min, E.W. MENN GW63 Flat Die Thread Rolling Machine with Rack-Type Dies Completely overhauled as new. New guides, vibrator, and new vibrating discharge system. Tjdpfx Aast Uucao Dsa New electrical system with inverter and PLC control. Thread size: M8 x 80/55 mm. Production rate: 480 pieces per minute. Thread diameter (min./max.): 3 - 8 mm. Die length: 115/130 mm. Available for inspection and testing at HBR Srl - Calolziocorte (LC).

Būklė: naujas, Gamybos metai: 2026, bendras ilgis: 1 450 mm, bendras plotis: 800 mm, bendras aukštis: 1 800 mm, bendras svoris: 500 kg, galia: 4,75 kW (6,46 AG), FC 120 ZK Working capacity Ø 120x120 mm, Number of belt stations (Z): 1, Number of brush stations (K): 1, Tsdpfst D D Nzox Aa Dsa Abrasive belt dimensions: 120x1850 mm, Brush belt dimensions: 120xØ200 mm, Abrasive belt speed: 20 m/s, Brush belt speed: 15 m/s, Feed speed: 12 m/min, Abrasive belt motor per head (x1): 3 kW, Brush motor per head (x1): 1.5 kW, Feed motor: 0.25 kW, Total power: 4.75 kW, Power consumption: 12A, Dust extraction port per head Ø (2x): 80 mm, Dimensions: 1450x800x1800 mm, Weight: 500 kg

Būklė: naudotas, Gamybos metai: 2014, veikimo valandos: 1 760 h, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 380 mm, tekėjimo ilgis: 650 mm, veleno skylė: 66 mm, veleno greitis (maks.): 4 500 aps./min, sukimosi greitis (maks.): 4 500 aps./min, sūpynės skersmuo virš skersinio vežimo: 380 mm, įvorės išorinis skersmuo: 210 mm, Strypo skersmuo (maks.): 66 mm, Įranga: dokumentacija / vadovas, Siūlome šį naudotą DMG MORI NEF 400 CNC tekinimo staklę, pagaminimo metai – 2014. tipas: NEF 400 Tsdpfxsy Iuvcj Aa Dja serijos numeris: 01620009641 gamybos metai: 2014 pagrindinio veleno maksimalus apsisukimų skaičius: 4500 1/min Hidraulinis prispaudimo diskelis Slankiklio diametras: 380 mm Tekinimo ilgis: 650 mm Siemens ShopTurn 840 D valdymas Strypo diametras: 66 mm Hidraulinė priešinis centras 12 padėčių revolveris Su drožlių transporteriu Tik 1760 veleno valandų Jei turite klausimų ar reikia daugiau informacijos, drąsiai rašykite arba skambinkite mums.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, tekėjimo ilgis: 535 mm, veleno skylė: 65 mm, X ašies eiga: 225 mm, Z ašies eigos atstumas: 535 mm, ašies variklio galia: 26 000 W, bendras aukštis: 1 900 mm, bendras ilgis: 2 900 mm, bendras plotis: 2 300 mm, bendras svoris: 4 380 kg, CNC tekinimo staklės MAZAK - QTN 200-II MAŠINOS ID: 9481 Gamintojas: MAZAK Tipas: QTN 200-II Valdymas: Mazatrol Matrix Nexus Pagaminimo metai: 2007 Maksimalus tekinimo skersmuo: 610 mm X ašis: 225 mm Z ašis: 535 mm Veleno skylė: 65 mm Sukimosi greitis: 5000 aps./min. Veleno galia: 26 kW Įrankių keitiklis: 12 pozicijų Drožlių transporteris: Taip Įrankio matavimo sistema (Tool Eye): Taip Darbo valandos: 5049 h Ilgis: 2900 mm Plotis: 2300 mm Aukštis: 1900 mm Svoris: 4380 kg Tjdpfx Aaeyyxh To Dea Prašome atkreipti dėmesį: Informacija šiame puslapyje buvo parengta pagal mūsų geriausias žinias ir, kiek įmanoma, gauta iš gamintojo. Informacija pateikiama sąžiningai, tačiau jos tikslumas negarantuojamas. Atitinkamai, tai nėra pasiūlymo ar sutarties sąlygos. Rekomenduojame patikrinti visus svarbius duomenis.

Būklė: naudotas, Grinding length 1000 mm Grinding width 300 mm Workpiece height 230 mm Clamping table area 1000 x 240 mm X-axis travel 1000 mm Y-axis travel 270 mm Z-axis travel 350 mm Grinding wheel diameter 240 mm Grinding spindle speed 2180 rpm Table speed - stepless - 3 - 30 m/min Total connected load 4.5 kW Machine weight approx. 2.8 t Machine dimensions (L x W x H) 2.36 x 1.37 x 2.0 m Tsdpfx Aou Dn Txsa Doa Accessories: Magnetic chuck 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), Coolant system

Būklė: geras (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 4 000 mm, vidinis ilgis: 6 500 mm, vidinis plotis: 1 500 mm, vidinis aukštis: 2 200 mm, ruošinio aukštis (maks.): 2 200 mm, ruošinio ilgis (maks.): 6 500 mm, Įranga: kabina, Miltelinio dažymo įranga, skirta apdoroti iki L6500 mm ilgio, B1500 mm pločio ir H2200 mm aukščio gaminius. Tjdpovdlfzsfx Aa Dja

Būklė: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Tsdpfx Aaormkfno Dsa Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: naujas, Gamybos metai: 2026, mašinos/transporto priemonės numeris: 2103 XXXXXX, The FPS 300M, successor to the DECKEL FP1. Drawing on our many years of service experience, we have decided to develop and manufacture our own milling machines. The FPS 300M is a conventional milling machine, ideal for training and production. Control System 3-axis – FPS Aktiv – digital readout Spindle Speed 40 – 2000 rpm, geometrically stepped direct-drive gearbox with 16 gear stages for maximum torque and milling performance Feed Rate 5 to 500 mm/min, steplessly adjustable Rapid Traverse 1.5 m/min Quill Extendable quill, vertical travel 60 mm, SK40 with M16 drawbar thread Optional: with DECKEL saw thread S20 x 2 Travel X/Y/Z 300/160/340 mm Table Fixed angle table, 600 x 210 mm Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° Todpjh I Nqwsfx Aa Doa Options • Z-axis bellows • Chip tray • Machine lamp • Centralized lubrication • Universal table • Rotary table • Shaping head • Dividing attachment • Steady rest • etc. Further technical data can be found in the attached data sheet.