Paviršiaus šlifavimo mašina

Jung JF 520

Būklė: geras (naudotas), Gamybos metai: 1989, Plokščioji šlifavimo staklė, gamintojas JUNG, tipas: JF 520 MS, pagaminta 1989 m. Su Jung valdymu. Šlifavimo ilgis: 600 mm, plotis: 200 mm. Magnetas: 500 mm x 200 mm, aušinimo sistema. Mašinos dokumentacija prieinama. Rodpfxjzicm Ae Ahgjw Daugiau duomenų – žr. duomenų lape.

Būklė: geras (naudotas), Gamybos metai: 1998, Battenfeld 600/200 CDC Rsdpjg Emvhefx Ahgjw Unilog 4000 Clamping force: 60 tons Year of manufacture: 1997 Screw diameter: 30 mm Shot weight approx. 90 g

Būklė: naudotas, Gamybos metai: 1985, Grinding length: 600 mm Grinding width: 200 mm Total power requirement: 7.5 kW Machine weight approx. 2.3 t O F F E R We can offer you, subject to prior sale and errors excepted, from stock on a non-binding basis: JUNG Horizontal Precision Surface & Profile Grinding Machine with Microprocessor Control Model: JF 520 MS Year of manufacture: 1985 2225 ----- Max. grinding length (table longitudinal travel): 600 mm Max. grinding width (cross travel): 200 mm Max. grinding height under the wheel approx.: 230 mm Max. distance table to spindle centre: 500 mm Magnetic chuck size: 500 x 200 mm Max. table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. vertical feed grinding head: 500 mm/min Grinding wheel dimension: 250 x 25 x 50.8 mm Max. peripheral speed (ceramic): 35 m/s Rsdpswd Tx Uofx Ahgjw Grinding spindle speed, infinitely variable: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total connected load: approx. 7.5 kW - 400 V - 50 Hz Weight: approx. 2,300 kg Accessories / Special Equipment: • Microprocessor program control (SIEMENS) with easy screen display. The program sequences are set via decade switches and stops (with vernier) and monitored on the screen. • Programs: plunge grinding with/without cross positioning, surface grinding with step-over or continuous cross feed, creep feed grinding upcut or downcut with/without cross positioning. All programs with automatic roughing, finishing, spark-out cycles, and automatic retraction. • Automatic straight line dressing device AF 65 S with automatic dressing value compensation and automatic speed adjustment for constant cutting speed (with display) • DIAFORM – grinding wheel profiling device mounted above the grinding wheel • Electrically controlled creep feed device with feed rate and motor load display • Short stroke device for controlling table reversal and table clamping (cross) • Swivelling JUNG sine magnetic chuck, 450 x 180 mm, mounted. Separate swivelling sine magnetic chuck 350 x 175 mm, fine-pole with stop • Coolant system with paper band filter, additional accessories, operating manual Condition: Very good condition with accuracy protocol by JUNG technician! Please click here for a video of the machine: Delivery: ex stock, immediate availability, FCA Metzingen Payment: strictly net - upon receipt of invoice

Būklė: naujas, Šlifavimo velenas Jung šlifavimo staklėms JF 520, JF 415 ir HF 50 tipams, naujas arba renovuotas Rjdpfx Ahozc Eukegew

Būklė: naudotas, Gamybos metai: 2002, Technical details: X-axis travel: 1,060 mm y-axis travel: 610 mm z-axis travel: 610 mm Control system: Ultimax 4 Spindle speed: 10 – 10,000 rpm Tool holder: SK40 Tool magazine: Drum magazine with 24 slots Feed rate (XYZ): 3 – 7,000 mm/min Rapid traverse (XY): 30 m/min Rapid traverse (Z): 20 m/min Table size: 1,220 x 510 mm Table load capacity: 1.1 t Compressed air connection: for 6 bar Total power requirement: 30 kVA Machine weight approx.: 6.28 t (without attachments) Dimensions (LxWxH) approx.: 2.82 x 3.2 x 2.7 m Chip conveyor dimensions (LxWxH): 3.0 x 0.65 x 1.5 m Separated working area with chip/splash guard enclosure Including coolant system with high-pressure supply (IKZ) 30 bar (tank size 1,200 x 500 x 150 mm), capacity for 340 liters Rjdpfx Ahsu Iddnogow Spindle with high-pressure coolant (IKZ) Scraper belt chip conveyor Control panel with two monitors Electronic handwheel Attention! The tool changer gripper arm is missing from the machine! The control system is set to disabled/off accordingly. As is.

Būklė: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 1981, Funkcionalumas: neveikiantis, mašinos/transporto priemonės numeris: 1661, Mašina yra sugedusi. Mašinos korpusas ir dalis priedų yra tvarkingi. Mašina parduodama iš esamos vietos. Kaina pagal užklausą. Rsdpfx Ahezcpx Hjgjw

Būklė: visiškai atnaujintas (naudotas), šlifavimo ilgis: 600 mm, šlifavimo plotis: 200 mm, šlifavimo ilgis 600 mm šlifavimo plotis 200 mm Rsdpfsxal Hyex Ahgsw elektromagnetinė plokštė 450×175 mm X eiga 660 mm Z eiga 225 mm šlifavimo disko matmenys 250x25x51 mm Valdymas Jung TouchScreen svoris apie 3000 kg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Working area Grinding length: 250 mm Centre height: 100 mm Workpiece weight: 30 kg Z-axis: 350 mm Table adjustment: 8° X-axis: 190 mm Grinding spindle Max. grinding wheel diameter: 500 mm Max. grinding wheel width: 80 mm Grinding wheel bore: 127 (203) mm Grinding wheel motor power: 5.5 kW Peripheral speed: 50 m/s Grinding wheel guard: D500 x 80 mm Workpiece spindle Speed: 1 - 2,000 rpm Workpiece spindle taper: MT4 Tailstock Tailstock quill taper: MT3 Tailstock quill stroke: 30 mm Fine adjustment range (cylinder): ±0.04 mm Rjdpfx Aevz Snkohgjw Equipment - Paper band filtration system - Rinsing gun - Mechanical mist extraction system

Būklė: labai geros būklės (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, Jung JF 520 D gamybos metai 1988 magnetas 500 x 175 mm maks. šlifavimo sritis 600 x 220 mm kintamas apsukų skaičius kintamas magneto stiprumas Rsdjzba Ngopfx Ahgow automatinis padavimas diaform aušinimo vandens/filtravimo bakas 3 x flanšas 1 x spaustukas dokumentacija mašina prijungta prie elektros apžiūrai

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2016, Jung Supromatic JF 520 Rsdpfxjy Naw Ie Ahgow Jung Supromatic JF 520 Surface Grinding Machine, Year of Manufacture: 2016, in very good, completely overhauled original condition. The machine comes from the technical center of a prestigious German mechanical engineering company. Technical Data: Year of manufacture: 2000 Technical specifications Clamping area (L x W in mm): 600 x 200 Grindable area (L x W in mm): 600 x 250 Maximum magnet size (mm): 500 x 200 Grinding wheel dimensions max. (mm): 225 (250) x 25 x 51 Distance table/spindle center (mm): max. 400 Table longitudinal feed pendulum (m/min): 1 – 20 Creep feed (mm/min): 0 – 500 Grinding spindle drive speed (rpm): 800 – 4200 Power (kW, with creep feed): 1.6 – 2.2 Machine weight approx.: 2.0 t Equipment and Accessories: - Magnetic chuck - Coolant unit - Machine feet - Grinding wheel About the machine: We offer a Jung Supromatic JF 520 surface grinding machine, year 2016, in very good condition. Naturally, the machine is fully functional and has approximately 50 operating hours since its overhaul. All slides move very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinders is highly user-friendly and allows for the production of surfaces with a low Rz value. Take the opportunity to inspect this machine under power on-site and see its condition for yourself. What has been overhauled Mechanical overhaul scope: - Comprehensive mechanical overhaul - Hydraulic system - Infeed system - Lubrication - Cross and vertical adjustment - Grinding spindle - Wheel dresser - Paint finish in new-machine quality Geometry scope: - Guideway grinding at the manufacturer (optional) - Hand scraping of guideways - Disassembling, measuring the column, scraping/grinding as needed, re-fitting with pressure pads, checking and recording guideways - Setting cross finish on the spindle head - Aligning the dresser - Regrinding the table and the magnet - Machine acceptance according to manufacturer’s inspection sheet Electrical scope: - Renewing complete electrical system, all limit switches and push buttons - Conversion of the X-axis from cam switches to contactless limit switches - New control cabinet - RSF position display (2- or 3-axis display) - Retention force control for 24V or electro-permanent magnetic chuck - Control system modernization - New auxiliary control cabinet (operator panel right upper side) - Thyristor control for grinding spindle drive - Manual cylindrical dressing with head dresser or side dresser (for Diaform operation)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 900 mm, sukimosi skersmuo virš skersinio stumduko: 630 mm, tekėjimo skersmuo: 450 mm, ašies variklio galia: 22 000 W, veleno greitis (min.): 38 aps./min, veleno greitis (maks.): 3 800 aps./min, veleno skylė: 80 mm, X ašies eiga: 580 mm, Y ašies eiga: 160 mm, Z ašies eigos atstumas: 945 mm, tvirtinimo skersmuo: 130 mm, greitas poslinkis X ašimi: 40 000 m/min, greitas poslinkis Y ašis: 26 000 m/min, greitasis eiga Z ašyje: 40 000 m/min, bendras aukštis: 2 600 mm, bendras ilgis: 3 750 mm, bendras plotis: 2 050 mm, veleno nosis: JIS A2-6, W ašies eiga: 1 000 mm, Įranga: dokumentacija / vadovas, Dreh-Fräszentrum OKUMA Multus B300-W TECHNISCHE DATEN: CNC-Steuerung: OSP-P200L Spitzenweite: 900 mm Max. Drehdurchmesser: 630 mm Spitzenhöhe über Schlitten: 630 mm Rjdpfx Ajw Eip Sehgjw Umlaufdurchmesser über Bett: 630 mm Verfahrweg X-Achse: 580 mm Verfahrweg Y-Achse: -80 / +80 mm Verfahrweg Z-Achse: 935 mm Verfahrweg W-Achse: 1000 mm Indexiergenauigkeit B-Achse: 0,001° Max. Drehzahl Fräskopf: 10.000 min⁻¹ Frässpindelaufnahme: HSK-A63 Max. Leistung Frässpindel: 16 kW Werkzeugmagazin-Kapazität: 60 Plätze Max. Werkzeuglänge: 300 mm Max. Werkzeugdurchmesser: 130 mm Max. Werkzeuggewicht: 8 kg Eilgang X-Achse: 40.000 mm/min Eilgang Z-Achse: 40.000 mm/min Eilgang Y-Achse: 26.000 mm/min Eilgang W-Achse: 20.000 mm/min Spindelaufnahme: JIS A2-6 Min. Spindeldrehzahl: 38 min⁻¹ Max. Spindeldrehzahl: 5.000 min⁻¹ C-Achsen-Inkrement: 0,001° Spindelleistung: 22 kW Gegenspindelaufnahme: JIS A2-6 Min. Gegenspindel-Drehzahl: 38 min⁻¹ Max. Gegenspindel-Drehzahl: 5.000 min⁻¹ Gegenspindelleistung: 15 kW Gesamtanschlusswert: 39,3 kVA Nennstrom: 56,7 A Versorgungsspannung: 400 V Maschinenabmessungen: 4.340 x 2.050 x 2.600 mm ZUSÄTZLICHE INFORMATIONEN: x1 One-Touch IGF Software-Option (CD-ROM auch für PC-Programmierung) x1 Fernbedienbares elektronisches Handrad x1 2-farbige Signalleuchte x1 Späneförderer x1 Kühlmitteltank

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1978, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1025, Plokščio šlifavimo staklės Jung JF 520 DS Nr. 1025 su 1 metų pilna garantija - Geometriškai renovuota, tikslumas pagal Jung standartą mažesnis nei 0,003 mm - Patikrinta elektros sistema, visiškai veikianti, svarbios dalys atnaujintos - Mechanika peržiūrėta - Visos dėvimų dalys pakeistos - Spalva rezeda žalia, dažų būklė gera Įranga: Elektropermanentinis magnetas 500x200 mm su Wagner valdymo įrenginiu 756, sumontuotas papildomai 2-ašių indikatorius Y ir Z ašims Automatinis pastūmimas Y ir Z ašims Išdegimas nuo 0 iki begalybės Y ašis su nulinės padėties atjungimu per žingsninį variklį Rodpfx Ahjy D I Idjgsw Padavimas apdirbimui ir baigiamajam šlifavimui Rankinis rankenėlės nuožymėtuvėlis Kintamas šlifavimo disko apsisukimų dažnis V-konstanta per disko nusidėvėjimą Popierinio juostos filtravimo įrenginys, naudotas, pilnai veikiantis Didžiausias šlifavimo plotas 600x250 mm Didžiausia apkrova su magnetu 100 kg Bendras svoris 2,5 t

Būklė: naudotas, Gamybos metai: 1980, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 290 mm Machine from the Physikalisch-Technische Bundesanstalt Rjdewb Hygopfx Ahgsw - Geometrically reconditioned - Electrical system checked, fully functional, relevant components replaced - All wear parts replaced - Color: light grey, paint condition good Equipment: Electromagnetic chuck 500x200 mm Grinding spindle overhauled 2-axis digital readout for Y and Z axes Automatic feed for Y and Z axes Y-axis with zero shut-off Manual hand dresser Infinitely variable grinding wheel speed Constant V-belt despite wheel wear Paper band filtration system, used Max. height with 250 mm grinding wheel diameter: 290 mm Max. grinding area: 600x250 mm Max. load including magnet: 100 kg Warranty: 1 year on geometry and electronics throughout Germany Delivery: ex works Availability: immediately Payment: prior to collection Acceptance at our facility Shipping as specified by the customer

Būklė: naudotas, Gamybos metai: 1977, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7570, 1 naudotas: JUNG plokštuminis ir profilių šlifavimo staklės • Modelis: HF 50-R(D) • Staklių nr.: 7570 • Pagaminimo metai: apie 1977, atnaujinta 06-1998 • Šlifavimo plotas: 500 x 200 mm • Šlifavimo diskas: maks. 250 x 25 x 51 mm PRIEDAI: Elektromagnetinė prispaudimo plokštė 450 x 180 mm Rjdpfx Aew R Tqpehgow 1 tiesinimo įrankis šalia veleno galvos 1 šlifavimo disko laikiklis su disku 1 universalus popierinės juostos filtras 1 dažnio keitiklis greičio reguliavimui Reguliuojamos kojelės

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, šlifavimo ilgis: 600 mm, šlifavimo plotis: 250 mm, šlifavimo disko skersmuo: 250 mm, JUNG JF520 / JF525 SPM-X mechanically, geometrically, and electrically overhauled according to JUNG’s new machine protocol with a new SIEMENS control system (12" Touch OP) incorporating our 25 years of experience in the overhaul of JUNG machines Rodpfx Ahjbwl Uhjgsw - new control cabinet with holding force regulation and thyristor control for main spindle motor - control system upgrade with 12" SIEMENS touch-OP cycle control and highly intuitive operator panel - remote maintenance module available as an option - plain-text fault display (multilingual) - electromechanical stepper motor infeed with programmable automatic retraction - roughing/finishing infeed - spark-out strokes selectable in advance - dressing compensation - plunge grinding cycles - automatic central lubrication - all numerical values (infeed) and on/off functions (such as hydraulics and coolant) can be set directly via touch panel - all analog functions such as spindle speed, holding force, cross feed speed, and grinding functions are directly accessible to the operator via rotary and toggle switches - comes with 12 months warranty Maximum magnet size: 600 x 200 mm (Standard: 500 x 200 mm) Maximum grinding area: 600 x 250 mm Delivery time: approx. 10–12 weeks We are happy to accept your used JUNG grinding machine in part exchange