Medžiagų bandymai pirkti naudotą (481)

Būklė: labai geros būklės (naudotas), Espec Model: TSA-202E-W Temperature Shock Chamber, Water-Cooled Cold Chamber Range: -55°C to 0°C Hot Chamber Range: +50°C to +200°C System: Two-zone test via flap switching Temperature Fluctuation: ±0.5°C Hot Chamber: Heat-up time: ambient temperature (20°C) to +200°C within 15 min. Cold Chamber: Cool-down time: ambient temperature (20°C) to -55°C within 35 min. Temperature Recovery: within 5 min. Internal Dimensions (W x H x D mm): 650 x 460 x 670 External Dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power Supply: 400 V AC 50Hz, 65 A Refrigerant: R404A 5 kg, R23 2.0 kg Weight: approx. 1200 kg Important information for your safety as a buyer: The following points are carried out on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection the chambers undergo a documented test run. Condition: used Hfsdpezh Htksfx Ag Eei Scope of delivery: (see picture) (Subject to changes and errors in technical data!) We will gladly answer any further questions by phone.

Būklė: labai geros būklės (naudotas), Vötsch Type: VBT 03/500 Air-cooled Temperature test chest with spray device Technical Description: Data for temperature tests without water: Temperature range: -30°C to +80°C Temperature deviation in steady-state condition according to IEC 60068-3-5, depending on test chamber temperature: timewise ± 1 K Temperature change rate according to IEC 60068-3-5: Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for temperature tests with water: Temperature range: +5°C to +80°C Possible water level: -10 mm to 540 mm Water level = -10 mm: The water level is below the sample rack Water level = 0 mm: Water level is at the upper edge of the sample rack Data for standard spray device: Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B: Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume per additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-tempering: Volume: approx. 2000 L Temperature range for pre-tempering: +5°C to +40°C Temperature change duration: Cooling from +18°C to +5°C: approx. 15 h Heating from +15°C to +40°C: approx. 10 h Data for installation and operation: Test chamber: width 1120 mm, depth 840 mm, height 540 mm Housing: width 2700 mm, depth 1300 mm, height 1575 mm Water tank: width 1100 mm, depth 800 mm, height 2200 mm Feedthroughs: 1 feedthrough Ø 50 mm, installed on left Test chamber volume: approx. 500 liters Refrigerant: R-404a Electrical connection: Nominal voltage: 3/N/PE AC 400V ± 10% 50Hz Nominal power: approx. 26 kW Nominal current: approx. 44.0 A (neutral loaded) Fuse protection: 63 A gG, provided by customer Weight: approx. 890 kg net Hfsdpfxszh D S Re Ag Eei For your safety as a buyer, the following information: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to technical modifications and errors in data and specifications!) For further questions, we are happy to assist you by phone.

Būklė: naudotas, Zwick / Roell Type: LTM10 Max. test frequency: 100 Hz (depending on amplitude) Dynamic test force in tension/compression: 10 kN Static test force in tension/compression: 7 kN Piston stroke: 60 mm Positioning and repeat accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Test space height without load cell: 1170 mm Weight with linear motor: 1065 kg (without control unit) Maintenance: As per maintenance instructions, partially by Zwick/Roell Accessories: Screw grips, software (TestXpert research) Connection: 400V 50/60 Hz 32A 3Ph/PE Hedpfxszh D R Hj Ag Esfi Condition: used Scope of delivery: (See picture) (Specifications and data are subject to change and error!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Weiss Model: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test Chamber Explosion-Proof) INERTING WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test Chamber Designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cooling / Heating Operation: -70 to +180°C Climate Operation: 10 – 95°C Humidity: 10...98 % rH Temperature Change Rate: Cooling approx. 2.5 K/min Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Required fuse (on site): 32 A slow-blow Permissible test specimen weight: Total load of grates: 80 kg Test chamber floor: 80 kg, insert grate: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (The evaporator of the air conditioning unit was replaced) Important safety information for you as buyer: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant Hsdpfx Ajzh D Ryog Eefi 3. Leak test with certificate 4. Upon successful inspection, chambers are subjected to documented test runs. Condition: used / gebraucht Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) For further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Climats Type: EXCAL 1413-HA Climate Chamber, Air-Cooled The EXCAL is equipped with a 15-inch capacitive multitouch panel PC, SSD storage, Windows 7, and 2 USB ports. This ensures it features the latest state-of-the-art technology. Technical Specifications: Test chamber dimensions: Width 550 mm x Depth 500 mm x Height 500 mm Housing dimensions: Width 820 mm x Depth 1375 mm x Height 1730 mm Viewing window: 350 x 380 mm Volume: 138 liters Standard cable ports installed: R1: 80 mm Ø L1: 80 mm Ø Data for temperature testing: Temperature range: -40°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.8 K Temperature change rate: Heating: 15 K/min Cooling: 10 K/min Data for climate testing: Temperature range: +10 to +90 °C Humidity range: 10 to 98 % RH Operating data: 3/N/Ph+PE 400V ±10% 50 Hz Rated power: 9.8 kVA Refrigerant: R-404A / R-23 Weight: 430 kg Important safety information for buyers: The following steps are performed in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Hfedpjzh D Rtefx Ag Eji Condition: used Scope of delivery: (See picture) (Technical data and specifications subject to change and error!) For any further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Cabinet This unit is used to test the ingress of water into housings. In conjunction with a timer, the test cycle can be automated with an adjustable testing duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for tests based on protection classes IPX3 and IPX4. The integrated water recirculation system minimizes water consumption. Features Glass door with wiper Pneumatic drive for the oscillating tube Adjustable oscillation angle Interchangeable oscillating tubes Swiveling and replaceable nozzle holders Adjustable and measurable water flow rate Control of test duration Mechanical Load Data Max. load capacity (evenly distributed over surface) Permitted specimen weight for sample carrier (total): 25 kg Spray radius: 200 mm / 400 mm Data for IP protection class tests Oscillation speed: approx. 60°/s Oscillation angle IPX3: approx. ±60° Oscillation angle IPX4: approx. ±180° -10° Dimensions: External dimensions incl. control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 1.5 kW Rated current: 6.0 A Weight: 375 kg Condition: used Hedpozh D Rmefx Ag Eofi Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Heraeus Hfsdpfx Agszh D Rgj Eji Model: HA 2472 BS Cleanroom Workbench For installation and operation in laboratories Internal dimensions: 1,800 mm x 580 mm x 830 mm (Length x Depth x Height) Lighting, gas connection Condition: used Scope of delivery: (see pictures) (Subject to technical changes and errors! Specifications are subject to change.) For any further questions, we will be happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Zwick / Roell Hfodpfjzh D Raox Ag Eji Zwick Indentec Hardness Tester Type: 4150DLC-A Technical Data: Available test forces: 60, 100, and 150 kgf Power supply: 115 / 230 V (50 - 60 Hz) 2/1A 1L/N/Pe + EO-4010C camera and ueye software Condition: used Weight: approx. 60 kg Scope of delivery: (see picture) (Changes and errors in the technical data and information reserved!) If you have further questions, we will be happy to answer them by phone.

Būklė: naudotas, Weiss Model: TS 130 Water-Cooled Temperature Shock Test Chamber Specification: Temperature range hot chamber: +60°C … +220°C Temperature range cold chamber: -10°C … -80°C Hot/cold chamber changeover: 10 sec. Temperature stability: ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width (without/with door hinge): without approx. 1820 mm, with approx. 1850 mm Depth (without/with test chamber door): without approx. 900 mm, with approx. 1155 mm Basket dimensions (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Max. test chamber load: 20 kg Max. floor load (test chamber): 20 kg Hjdpfezh D N Aex Ag Eofi Cooling water pressure: min. 2 … max. 6 bar Max. pre-fuse: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit: approx. 65 dB(A) Cascade cooling system, water-cooled Rated connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See picture) (Technical data subject to change and error!) If you have any further questions, we are happy to answer them for you by phone.

Būklė: naudotas, Bruker Type: Tensor 27 IR Spectrometer Maximum sample flexibility. Thanks to the improved QuickLockTM mechanism and the locking button on the front, Hodpfx Aszh D Nvsg Eefi even bulky accessories can be installed quickly and, above all, safely. Additionally, the INVENIO can be equipped with three software-controlled beam outputs for a wide range of external modules. FPA micro and macro imaging Variable external sample chamber (left and right) for individual experiments Fiber optic coupling to fiber probes for liquids and solids Integrating sphere Autosampler for liquids High-throughput analysis module HTS-XT Reflection unit for the air-water phase boundary Much more! Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We are happy to answer any further questions by phone.

Būklė: geras (naudotas), CTS Model: T-70/600/S Water-cooled temperature test chamber Refrigerant: Converted to R-452A Control system: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific DUT control Technical Data Temperature testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat radiation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, no heat radiation, and without additional equipment. Dimensions: Test chamber volume: 600 liters Internal dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating data: Power supply: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Hfedpfjzh D E Rex Ag Eoi Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, the following information! The following work is carried out on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in technical data, specifications reserved!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Techniniai duomenys: Hjdpfx Aexzukkog Ejfi Darbinė įtampa: 400V AC Maks. priešlaikinis saugiklis: 16A Dažnis: 50/60Hz Elektros jungties galia: 4,5kW Temperatūros intervalas: +12°C virš kambario temperatūros iki 300°C Erdvinis temperatūros nukrypimas prie 150°C: ± 2,0K Laiko temperatūros nukrypimas prie 150°C: ± 0,6K Įšilimo laikas iki 150°C: 25 min Atsistatymo laikas po 30 s durų atidarymo prie 150°C: 6 min Oro kaitos dažnis prie 100°C: 5x/val. Vidinis tūris: 741 l Maks. apkrova vienai lentynai: 45 kg Maksimali bendroji apkrova: 315 kg Energijos suvartojimas prie 150°C: 800 Wh/val. Maks. lentynų skaičius: 16 Išoriniai matmenys: Plotis: 1 165 mm Aukštis: 1 590 mm Gylis: 870 mm Vidiniai matmenys: Plotis: 1 000 mm Aukštis: 1 300 mm Gylis: 570 mm Svarbi pastaba: Ratukai yra pritvirtinti/pridedami.

Gamybos metai: 2001, būklė: naudotas, Erichsen universali lakštinio ir juostinio metalo bandymo mašina Modelis 145-60 Būklė: naudota Pagaminimo metai: 2001 Techniniai duomenys: Hidraulinė pavara Variklio galia maks.: 11,5 kW / 1500 aps./min. Srautas (mažas siurblio ratas): 12,3 dm³/min Srautas (didelis siurblio ratas): 31 dm³/min Bandymo cilindras Praspaudimo jėga: 665 kN / 160 bar Hidraulinė bandymo galvutės atidarymas Darbinis slėgis maks.: 95 bar Laikymo slėgis: 50 bar Traukimo jėgos intervalai, perjungiami: mažas traukimo jėgos intervalas: 37 kN / 10 bar vidutinis traukimo jėgos intervalas: 225 kN / 60 bar didelis traukimo jėgos intervalas: 600 kN / 160 bar Maks. traukimo eiga: 150 mm Maks. traukimo greitis: 750 mm/min Traukimo stūmoklio eigos indikacija: tikslumas 0,1 mm Elektros prijungimo duomenys Hfodoyr R Uhepfx Ag Esi Energijos tiekimas: 400 V trifazė, 50 Hz Saugyklos: 25 AT ir 35 AT Darbinė aplinkos temperatūra: nuo +5° iki +50° C Matmenys, svoris Išmatavimai (I/P/A): 1800 mm / 1320 mm / 1400 mm Grynasis svoris: apie 2400 kg

Būklė: labai geros būklės (naudotas), ESPEC TSA-72EL-A temperatūrinio šoko bandymų kamera Gamintojas: ESPEC Corporation Hodpfxjzhkfqo Ag Eofi Tipas: TSA-72EL-A Įrenginio tipas: temperatūrinio šoko bandymų kamera / Thermal Shock Chamber (2 zonų) Vėsinimas: vandens aušinimas Parduodama naudota ESPEC temperatūrinio šoko bandymų kamera, modelis TSA-72EL-A. Įrenginys tinkamas tiksliai atkartojamiems temperatūrinių svyravimų ir šiluminių šokų bandymams tyrimuose, kūrimo, kokybės užtikrinimo srityse bei elektronikos, automobilių, aviacijos ir medžiagų bandymų srityse. Perjungimas tarp karštosios ir šaltosios kamerų vyksta automatiškai per 2 zonų sklendės sistemą. Techniniai duomenys Bandymų kameros tūris: apie 70 litrų Vidiniai matmenys (P × A × G): 410 × 460 × 370 mm Išoriniai matmenys (P × A × G): 1.310 × 1.900 × 1.470 mm Svoris: apie 900 kg Temperatūros diapazonas karštoje kameroje: +50 °C iki +200 °C Temperatūros diapazonas šaltoje kameroje: -65 °C iki 0 °C Temperatūros pastovumas: ±0,5 °C Išankstinio pašildymo temperatūra: iki +205 °C Išankstinio vėsinimo temperatūra: iki -75 °C Įšilimo laikas: nuo aplinkos iki +200 °C per ~15 min. Atvėsimo laikas: nuo aplinkos iki -70 °C per ~40 min. Temperatūros atsistatymo laikas: ≤ 5 min. Maks. bandomasis svoris: 30 kg (paskirstytas tolygiai) Kabelio įvadas: Ø 50 mm Suspausto oro tiekimas: 0,4–0,7 MPa (4–7 bar) Šaldymo sistema / elektros tiekimas Šaldymo sistema: mechaninė kaskadinė šaldymo sistema Šaltnešis aukštos temperatūros pusėje: R404A Šaltnešis žemos temperatūros pusėje: R23 Kondensatorius: vandens aušinimas Maitinimo įtampa: AC 380 / 400 / 415 V 3 fazės / 50 Hz Maks. srovės suvartojimas: 45 A Įranga 10,4" TFT spalvotas jutiklinis ekranas PID temperatūros reguliavimas Programų atmintis (RAM/ROM) Trendo grafikas Pavojaus signalų istorija RS-485 sąsaja Ekonomiškas veikimas Automatinis atitirpinimas Vertikalūs stumdomi durų vartai Nerūdijančio plieno bandymų kamera 2 nerūdijančio plieno bandymų lentynos Mechaninė kaskadinė šaldymo sistema Elektroninis išsiplėtimo vožtuvas Sirocco cirkuliacinis ventiliatorius Pneumatinė sklendžių perjungimo sistema Kabelio įvadas Ø 50 mm Pritaikymo sritys Temperatūrinio šoko bandymai Temperatūros svyravimo bandymai Elektronikos bandymai Puslaidininkių testavimas Automobilių pramonė Medžiagų bandymai Komponentų bandymai Kokybės užtikrinimas Tyrimai ir plėtra Būklė Naudota Optinė būklė pagal nuotraukas. Komplektacija ESPEC TSA-72EL-A temperatūrinio šoko bandymų kamera 2 nerūdijančio plieno bandymų lentynos Priedai pagal nuotraukas Komplektacija kaip parodyta. Galimi pakeitimai, rašybos klaidos ir tarpinis pardavimas.

Gamybos metai: 2021, būklė: beveik kaip naujas (naudotas), Memmert ICH 260 kamera iš 2021 metų, kaip nauja. Įrenginys po parodų ekspozicijos. Vienerių metų garantija atsarginėms dalims. Gamintojo aprašymas: Darbinės temperatūros diapazonas be drėgmės: 0 iki +60 °C Temperatūros nustatymo diapazonas 0 iki +60 °C Darbinės temperatūros diapazonas nuo +10°C iki +60°C esant drėgmei ir/ar šviesai Temperatūros nustatymo tikslumas 0,1 °C Temperatūros jutiklis Hfodpfx Aozam Hvsg Eei 2 Pt100 jutikliai pagal DIN A klasę, keturių laidų grandinėje, tarpusavio stebėsenai, perima funkcijas gedimo atveju Drėgmė Drėkinimas atliekamas panaudojant distiliuotą vandenį iš išorinio rezervuaro savaime įsiurbiančios siurblio pagalba Drėkinimas garų generatoriumi Drėgmė aktyvus oro drėkinimas ir džiovinimas reguliuojamas 10–80 % santykinės drėgmės ribose, su skaitmeniniu drėgmės indikatoriumi – indikatoriaus skiriamoji geba 0,1 %, nustatymo tikslumas 0,5 %

Gamybos metai: 2021, būklė: labai geros būklės (naudotas), Memmert ICH 260L Chamber from 2021. The device is offered with a one-year spare parts warranty. Manufacturer’s description Temperature Operating temperature range without humidity: 0 to +60 °C Temperature setting range 0 to +60 °C Operating temperature range from +10°C to +60°C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 x Pt100 sensors, DIN Class A, 4-wire circuit, mutually monitoring and takeover functionality in case of fault Hfsdpfxozam Hio Ag Esi Humidity Humidity humidification using distilled water from an external reservoir, fed by a self-priming pump Humidification generated by a steam generator Humidity active humidification and dehumidification, adjustable within a 10–80% relative humidity range with digital RH display – display resolution 0.1%, setting accuracy 0.5% Light Light Daylight and ultraviolet light can be programmed individually via the controller Light cold white light +/- 6%, for UV light +/- 10% Light Lighting unit consisting of 4 cold white fluorescent tubes (standard D65 illumination, 6500 K) and 2 UV lamps in the spectral range of 320–400 nm

Gamybos metai: 2024, būklė: beveik kaip naujas (naudotas), Memmert HPP 1060 eco Chamber, year 2024. Hfjdpfxozam E Sj Ag Esi Ex-demo unit with a one-year warranty on spare parts. Manufacturer’s description: Temperature setting range without light, with humidity: +5 to +70 °C Temperature setting range without light, without humidity: 0 to +70 °C Operating temperature range without light, with humidity: +5 (at least 20 below ambient temperature) to +70 °C Operating temperature range without light, without humidity: 0 (at least 20 below ambient temperature) to +70 °C Temperature setting accuracy 0.1 °C Temperature sensor 2 x Pt100 sensors DIN Class A in four-wire circuit for mutual monitoring, with error fallback capability Humidity Humidity setting range 10 – 90% relative humidity Humidity humidification provided by distilled water from an external tank via a self-priming pump Humidification humidification using a steam generator Dehumidification dehumidification via Peltier technology refrigeration dryer Humidity setting accuracy 0.5% relative humidity

Būklė: geras (naudotas), H. Köhler HK 300 S kondensato vandens tikrinimo įrenginys Gamintojas: H. Köhler GmbH Tipas: HK 300 S Įrenginio tipas: kondensato vandens tikrinimo įrenginys / korozijos bandymų kamera Bandymo kameros tūris: apie 300 l Parduodamas naudotas H. Köhler HK 300 S kondensato vandens tikrinimo įrenginys. Įrenginys skirtas kondensato klimato bandymams pagal DIN 50 017, korozijos bandymams, dengimo bandymams, dažų bandymams, medžiagų bandymams bei kokybės kontrolei. Techniniai duomenys Bandymo kameros tūris: apie 300 l Temperatūros diapazonas: nuo kambario temperatūros iki maždaug +55 °C Drėgmės diapazonas: galimas prisotinimo režimas Bandymo kameros šildymas: 1 000 W Maitinimo įtampa: 230 V / 50 Hz Bendra galia: 1 000 W Suslėgto oro suvartojimas vėdinant: apie 3 Nm³/h Suslėgto oro prijungimas: 4,5 – 7,0 bar Demineralizuoto vandens prijungimas: 2,5 – 4,0 bar Matmenys (P × G × A): apie 1 200 × 600 × 1 750 mm Svoris: apie 100 kg Valdymas HK PC102 valdiklis LCD ekranas Programuojamos bandymų sekos Kondensato klimatas pagal DIN 50 017 Hedpfezhadcjx Ag Esfi Rankinis / bandymo režimas Pavojaus signalų rodymas Įranga Nerūdijančio plieno bandymo kamera Didelės stiklinės durelės su tarpine Bandymo kameros termometras Manometras Vėdinimo sistema Suslėgto oro prijungimas Demineralizuoto vandens prijungimas Nuotekų prijungimas Nerūdijančio plieno pagrindas su ratukais Priedai pagal nuotraukas Būklė Naudota Optinė būklė pagal nuotraukas. Ekranas rodo kondensato klimato DIN 50 017. Dokumentai nepridedami. Pristatymo komplektacija H. Köhler HK 300 S kondensato vandens tikrinimo įrenginys Nerūdijančio plieno pagrindas Priedai pagal nuotraukas Pristatymo komplektacija, kaip pavaizduota. Pasiliekama teisė keisti informaciją, padaryti klaidų ar parduoti įrenginį anksčiau nei paskelbta.

Būklė: geras (naudotas), H. Köhler HK 300 S Kesternich korozijos bandymų įrenginys Gamintojas: H. Köhler GmbH Tipas: HK 300 S Pagaminimo metai: nežinomi Mašinos tipas: Kesternich korozijos bandymų įrenginys / SO₂ korozijos bandymų kamera Bandymų kameros talpa: apie 300 l Parduodamas naudotas H. Köhler HK 300 S korozijos bandymų įrenginys, skirtas Kesternich arba SO₂ korozijos bandymams pagal DIN 50017 / DIN EN ISO 6988. Įrenginys tinka korozijos bandymams su metalais, dangomis, lakais ir komponentais laboratorijoje, moksliniuose tyrimuose, plėtroje ir kokybės užtikrinime. Techniniai duomenys Bandymų kameros talpa: apie 300 l Temperatūros diapazonas: nuo aplinkos temperatūros iki apie +55 °C Drėgnas veikimas: galimas prisotintas režimas Bandymų kameros šildytuvas: 1.000 W Šaltinio galia: apie 1.100 W Energijos tiekimas: 230 V / 50 Hz Suspausto oro sąnaudos: apie 3 Nm³/h Suspausto oro jungtis: 4,5 – 7,0 bar Išgryninto vandens prijungimas: 2,5 – 4,0 bar Purškimo slėgis: 0,7 – 1,5 bar Matmenys (P × G × A): apie 1.200 × 600 × 1.750 mm Svoris: apie 100 kg Valdymas HK PC102 mikroprocesorinis valdiklis LCD ekranas Programuojamos bandymo sekos Temperatūros reguliavimas Įranga Nerūdijančio plieno bandymo kamera Didelis stebėjimo langas Dujų dozuojimo sistema Vėdinimo sistema Temperatūros reguliavimas Bandymo kameros termometras Manometras Suspausto oro jungtis Išgryninto vandens prijungimas Ištraukimo ortakio jungtis Yra naudojimo instrukcija Yra techninės priežiūros dokumentai Yra EB atitikties deklaracija Pritaikymo sritys Kesternich bandymai SO₂ korozijos bandymai Korozijos tyrimai Dangų bandymai Lako bandymai Medžiagų bandymai Automobilių pramonė Kokybės užtikrinimas Tyrimai ir plėtra Būklė Hsdpfx Agjzg U Tis Esfi Naudotas Išvaizda pagal nuotraukas. Komplektacija H. Köhler HK 300 S korozijos bandymų įrenginys Naudojimo instrukcija EB atitikties deklaracija Techninės priežiūros dokumentai Dokumentacija Priedai pagal nuotraukas Komplektacija kaip pavaizduota. Galimi pakeitimai, klaidos ir tarpinis pardavimas.

Būklė: naudotas, CTS Type: TS -70/600-13 Water-cooled climatic test chamber Series: TS -70/600-13 Control system: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side specimen control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 2250 mm, Width approx. 1300 mm, Depth approx. 2475 mm Temperature range: -70 to +180°C Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from +120°C to -40°C Temperature deviation: ± 0.1 K over time, ± 0.5 K spatially Electrical connection: 400 V / 3P / N / PE Nominal power: approx. 27.8 kW Nominal current: approx. 44.1 A Hsdpfx Aezg Tzfsg Esfi Compressor: 4TC-8.2Y / 4PC-10.2Y Refrigerant: R-404A / R-23 Weight: 1350 kg For your safety as a buyer, please note the following information! The following measures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We are happy to answer any further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Temperature Test Chamber T-55/1000 Li Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS chamber series is composed as follows: For example, Type T -55/1000/Li 1) T stands for: Temperature 2) -55 stands for: lower temperature limit -55 °C 3) 1000 stands for: 1000 liters test chamber volume 4) Li stands for: Special equipment for tests with lithium-ion accumulators Control: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text Ethernet interface RS 232 interface Free switching channels for user-side test specimen control Test chamber lighting: Energy-efficient, high-luminance LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg 1a Feedthrough NW50 1b Feedthrough 2x NW125 1c Feedthrough 2x Rp 3 1/4'' for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect the performance data. Dimensions: Test chamber volume 1000 liters Internal dimensions Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operational data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at 1m distance from the front) Weight approx. 1000 kg Heat emission to installation room 10.4 kW Cooling unit: Water-cooled, low-noise, fully hermetic Continuous performance adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Important information for your peace of mind as a buyer! The following points are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant Hfsdpfxezg Ty Us Ag Esi 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and error in technical data and information!) We are happy to answer any further questions you may have by telephone.

Būklė: labai geros būklės (naudotas), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of target and actual values - Numerical input of target values - Error messages in plain text - RS 232 interface - Free switching channels for external specimen control Technical Specifications Temperature Testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat emission: approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without specimen, without irradiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Nominal power: 8.8 kW Nominal current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant Hfodpfxszg Ty Ie Ag Esi 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information reserved!) If you have further questions, we will be happy to answer them by phone.

Būklė: labai geros būklės (naudotas), Heraeus Vötsch Model: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature Range: -70°C to +180°C Hedpjzg Tyzjfx Ag Esfi Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±2.0 K Temperature Change Rate (Cooling): 5.0 K/min Temperature Change Rate (Heating): 6.5 K/min Heat Compensation at +20°C: 3000 W Heat Compensation at -20°C: 3000 W Test Chamber Internal Dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External Dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Test Chamber Volume: 335 liters Rated Voltage: 3/N/PE AC, 400V ±10%, 50 Hz Rated Power: 10 kW • Rated Current: 21 A Sound Level at 1 m Distance (Free Field Measurement):

Būklė: naudotas, KB Prüftechnik Hardness Testing Machine Type: KB 750 BVRZ Machine Type: KB 750 – 1 kg to 750 kg UNIVERSAL DIGITAL KB Universal Hardness Testing Machines for automatic, standards-compliant hardness testing. Suitable for all hardness testing methods within the load range HV 0.2–1 – 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (only HK 1), ball indentation hardness (plastics), and depth measurement according to Vickers and Brinell. Fully automatic testing sequence, evaluation of indentations on the built-in LCD monitor via integrated video camera and zoom lens ensure the highest evaluation accuracy as per standards. All hardness values are displayed digitally in real time. User-friendly and powerful control panel with high-contrast, glare-free color LCD monitor. Impression measurements are parallax-free. Test forces are applied electronically with maximum precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with a basic equipment set to enable immediate commissioning with the ordered indenters. A selection of mounts, test tables, indenters, objectives, hardness comparison plates, etc., are available. Connection to a PC or central computer is possible with all KB hardness testing machines. With the optional full automation software and motorized cross table, the machine can be operated as a fully automatic system. - Fully automatic testing process - Optical evaluation via integrated video analysis - Extremely user-friendly and efficient - Large color LCD display - Industrial membrane keypad - Flexible software customization - 1:7 zoom lens - Parallax-free measurement - Force measuring cells, regulated force application, LED illumination - Rockwell resolution: 0.025 HRC - Extremely efficient - 200 user-definable test programs - Calibration machine accuracy (option) - Innovative LED ring light (option) - Automatic image evaluation (option) - 2 parallel + serial interfaces, plus keyboard connection - Extended load range XL (option) - Freely switchable language selection - German, English, French, Italian KB750 BVRZ: Test load: 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Super Rockwell Test table Ø80 mm Motor zoom 1:7 Objective 4x for HV10-HB5/750 NOT suitable for HV5 Operating features: Programmable digital panel with the following functions: - Measuring the hardness indentation on the LCD display with movable measurement markers, parallax-free - Logically structured, simple user interface - Freely create and store up to 200 test programs Hfjdpfxszg Tyue Ag Esi - Automatic force selection based on chosen test method - Freely selectable application times for test forces - Freely selectable holding times for test forces - Online help - Automatic correction for curved surfaces in accordance with DIN EN ISO - Control of the fully automatic testing process - Direct digital hardness value display - Tolerance display - Conversions according to DIN 50150 Table B1 - Report generation in DIN A4 format with standard printer via parallel interface - Serial interface for data output to PC - Optional network connectivity - Four languages: German, English, French, Italian Statistical functions, such as: - Number of tests - Min / Max - Mean value - Range - Standard deviation - cp / cpk - Histogram (Technical data subject to change and errors excepted!)

Būklė: labai geros būklės (naudotas), Espec Model: EGN28-6CWL Espec Water-cooled Temperature Temperature Test Chamber N Series Power Supply: AC 400 V 3-phase 50/60Hz 38A Temperature Range: -70 to +180°C Temperature Change Rate: Heating: 10 K/min Cooling: 5.5 K/min Internal Dimensions (W x H x D in mm): 1000 x 1000 x 800 External Dimensions (W x H x D in mm): 1205 x 1920 x 2159 Usable Volume: 800 liters Refrigerant: R-404A Refrigerant: R-508A Hfedpjzg Tynefx Ag Eji Weight: approx. 695 kg Important safety information for you as the buyer! The following steps are carried out on all chambers we offer before delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.