Pjovimo griovelių mašinos pirkti naudotą (161)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
mažas skelbimas
Regensburg
1 058 km
Lakštinio metalo šalinimo mašina
Timesavers42-Serie-1350-WRB
Skambinti
Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2017, veikimo valandos: 3 862 h, Funkcionalumas: visiškai funkcionalus, Used machine
Year of manufacture: 2017
General Specifications:
Max. working width of sanding belt unit: 1350 mm
Sanding belt dimensions (W x L): 1380 x 1900 mm
Outer brush diameter: 350 mm
Table opening: 0 – 100 mm
Min. part size: 50 x 50 mm
Speed
Feed speed, frequency-controlled: 0.5 - 8 m/min
Electricity
1st unit – W – sanding belt: 11 kW
2nd unit – RB - rotary brush unit: 1.5 kW
Brushes: 4 x 1.5 kW (6 kW)
Ijdpfxsw Dzyts Afwsa
Feed motor, frequency-controlled: 2.6 kW
Vacuum pump: 15 kW
Electric connections: 400 Volt
Frequency: 50 Hz
Compressed air only for sanding belt unit
Required air pressure: 6 bar
Consumption: 160 l/min
Dust extraction at 100 mm static pressure
Sanding belt unit: 2000 m3/h
Vacuum pump: 1500 m3/h
Weight: approx. 6000 kg
Includes one set of brushes and a starter set of sanding belts.
New extraction system available as an option.
The machine has been technically overhauled
(Transport carpet and bearings are new, value approx. €20,000)
Immediately available
Aukcionas
Aukcionas pasibaigęs
Hessen
1 171 km
Lakštinio metalo šalinimo mašina
GKTESODS BASE
Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2017, veikimo valandos: 7 464 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0041, padavimo ilgis X ašis: 400 mm, padavimo eiga Y ašimi: 400 mm, padavimo ilgis Z ašis: 600 mm, ruošinio svoris (maks.): 20 kg, No minimum price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Iodpswrr Tyofx Afwsa
Working Area
Travel (cubic): 400 x 400 x 400 mm
Electromechanical Adjustments
Adjustment in Z-axis: up to 600 mm manually
Travel in X, Y-axis: each ±200 mm
Rotation around A and B axes: each +/- 45 degrees
Adjustment speed: 1 m/s
Load capacity: 20 kg
Operation
Control system: BOSCH REXROTH
Connection Data
Connected load: 21 kVA
Operating voltage: 400 V
mažas skelbimas
Ennepetal
1 178 km
Lakštinio metalo šalinimo mašina
ERNSTEM5N II + 2F
Skambinti
Sąlyga: naudotas, Gamybos metai: 2008, Working width / mm
Workpiece height / mm
/
Workpiece thickness: 1-70 mm
Min. workpiece length: 350 mm
Min. workpiece length with magnetic or vacuum conveyor: 80 mm
Band filter unit capacity Ab=900 approx. 350 l
Band filter unit capacity Ab=1400 approx. 400 l
Constant working height 1000 mm
Feed speed 2/4 m/min
Stepless feed speed 1.5-8 m/min
Operating voltage 400 VAC
Control voltage 24 V DC, 230 VAC
Frequency 50 Hz
Compressed air connection R 3/8"
Minimum compressed air pressure 5 bar
Minimum compressed air volume EMSN II +2F 10 Nl/min
Minimum compressed air volume EMSN II /L +2F 80 Nl/min
Total electrical connection See layout plan
Machine weight, working width 900 mm approx. 4,200 kg
Machine weight, working width 1400 mm approx. 5,100 kg
Machine weight, working width 1540 mm approx. 5,600 kg
Abrasive belt dimension, sanding drum AB=900 1,540 mm long x 900 mm wide
Abrasive belt dimension, sanding drum AB=1400 1,540 mm long x 1,400 mm wide
Abrasive belt dimension, sanding drum AB=1540 1,540 mm long x 1,540 mm wide
Iodoinwwzopfx Afwja
5. Technical Description
The machine works with a wet grinding process and must only be operated with a suitable grinding emulsion.
A band filter system is used to filter out the grinding dust generated from the emulsion.
The machine is equipped with an elastic sanding drum, which is used for surface grinding or burr removal. Two counter-rotating abrasive flap brushes, or alternatively stainless steel brush rollers, are then used for edge rounding. Two subsequent spring steel brushes are used to remove the oxide layer from the cut edges.
Within the machine, pressure rollers hold down the workpieces on the continuous conveyor belt, keeping the parts in position during the grinding process.
=> This results in a minimum workpiece length of 350 mm.
At the discharge end, there is an integrated drying unit to dry the workpieces before they exit the machine.
The machine is equipped with a continuous conveyor belt for workpiece transport.
An optional special version may include a vacuum suction system or a magnetic conveyor. This allows for processing of smaller workpiece sizes. For non-magnetic small parts, a minimum length of 80 mm with a minimum area of 200 cm² applies. For magnetic small parts, a minimum length of 80 mm with a minimum area of 40 cm² applies.
All sanding and brush elements are fitted with nozzle tubes, which continuously spray the tools with emulsion, enabling the processing of aluminium and its alloys.
The grinding residue is carried away by the emulsion to the band filter unit and collected by a suitable filter fleece.
ERNST
Automatic sheet metal deburring machine with wet grinding system
Type EM 5 N/II/L + 2 F 1400
Year of manufacture: 2008, Serial no. 780063
Machine/Equipment:
Sheet metal deburring machine with wet grinding system for punched, laser-cut and nibbled parts made of various materials, featuring a flexible sanding drum and 2 flap brushes for particularly high edge rounding.

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
mažas skelbimas
Bad Wünnenberg
1 086 km
Viena viskam: šlakas, atplaišos ir oksidas
EdgeRacerthe Grinder G 1500
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 500 mm, maks. lakšto storis: 102 mm, bendras ilgis: 1 300 mm, bendras plotis: 3 100 mm, bendras aukštis: 2 600 mm, bendras svoris: 2 600 kg, praėjimo plotis: 1 500 mm, ruošinio aukštis (maks.): 102 mm, One machine for everything: removing slag, burrs, and oxide
Reliable and clean slag removal with slag hammer brushes
EdgeRacer the Grinder effortlessly removes slag formed on the underside during plasma or oxy-fuel cutting. The disc brushes are adjusted to almost touch the underside, allowing the steel pins to hammer off the slag.
Powerful deburring and precise edge rounding
EdgeRacer® the Grinder easily removes stubborn punching burrs and laser beads/splatter. You can also adjust the brush feed to define the level of edge rounding required.
Iedpjwzybksfx Afwea
Deburring and edge rounding of thin sheets and 3D workpieces
Deburr thin sheets or sheets with cutouts. The grinding brushes can be positioned below the transport level, ensuring the entire workpiece edge is processed. The oxide-disc allows for removal of oxide layers from both inner and outer contours.
Full working width or double performance – optimally adjusted to your requirements
Depending on the width of the parts to be processed, you can select between two processing modes. Choose single-row operation to fully utilize the working width, whether for wide parts or for parallel loading. To optimize tool wear, the brushes automatically change their positions. For narrower workpieces, select double-row operation for dual processing in a single pass.
mažas skelbimas
Waiblingen
1 218 km
RSA šepetėlių nuvalymo mašina
RSARASAMAX MONO
Skambinti
Gamybos metai: 1997, Sąlyga: naudotas, Brush Deburring Machine RSA RASAMAX MONO
for brushes Ø 250 mm and approx. brush width 80 mm
Speed range 1,500 / 3,000 rpm
Operating voltage 380 Volts
Total power requirement 2.0 / 3.0 kW
Ijdoimbq Depfx Afwoa
Weight approx. 180 kg
For deburring sheet metal with contours, suitable for material thicknesses from approx. 1.0 mm to 6.0 mm. Two-step brush speed: 1,500 or 3,000 rpm.
The machine is located at our facility in 71334 Waiblingen-Beinstein and can be inspected on site. Please contact us for further information.
Atraskite daugiau naudotų mašinų
mažas skelbimas
Sternenfels
1 228 km
Lakštinio metalo šalinimo mašina
COSTA LEVIGATRICIMD 5 CVC 1350
Skambinti
Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 350 mm, Grinding and deburring machine COSTA MD5 CVC 1350
Grinding, deburring, edge rounding, and finishing of series components
Year of manufacture: 2021
Control system: Costa
Operating hours: rarely used
Technical Specifications:
Free-standing machine
Working height: variably adjustable from 0.5 mm to 150 mm
Working width: 1350 mm
Maximum part weight: 400 kg
Belt length: 2620 mm
Constant table height, infeed via sanding units
Iodpjwq Dnmjfx Afwea
Intuitive PLC control for creating, saving, and retrieving programs
Electromechanically positionable grinding units in steps of 0.01 mm
Accessories:
- Extraction system: Wet separator extraction unit W 4000
mažas skelbimas
Regensburg
1 058 km
Atraminės juostelės valiklis
BMZPro Cleaner - Auflagenleisten - Reiniger
Skambinti
Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, - 1 set of cleaning tools included with the machine
- 3-phase power supply
- 5-pin electrical plug
- Includes transport and storage cart
Ijdpfxowpulas Afwoa
The support bar cleaner from BMZ ensures increased longevity of the support bars through repeated cleaning. It cleans quickly and easily, without the need to remove the bars for servicing, saving valuable time! Cleaning a complete standard-sized pallet (1500 x 3000 mm) takes approximately 30 minutes. On laser cutting machines equipped with a pallet changer, users can even clean the bars while cutting is in progress.
The BMZ Pro Cleaner removes even heavily contaminated bars from slag and automatically adjusts to varying slag thicknesses up to 25 mm. It is also suitable for removing stubborn stainless steel slag.
Regular cleaning increases process reliability and the quality of the produced parts.
mažas skelbimas
Böblingen
1 247 km
Šepetėlių šalinimo mašina
ZIMMERGRATMAXX
Skambinti
Sąlyga: naujas, GRATMAXX Deburring Brush Machine
The machine is suitable for deburring cut edges on:
Round tubes, square tubes, rectangular tubes, solid materials, and profiles of all kinds.
Materials:
Hard or soft steel, non-ferrous metals, plastics.
Operation:
After adjusting the workpiece support and the side stops, the burr-laden workpiece is lightly pressed against the brush, which rotates around its own axis. The workpiece itself is not rotated; the brush performs this movement. The type of workpiece material, the thickness of the burr, and the desired edge rounding determine the contact pressure and duration, which is typically about 1–5 seconds.
Technical specifications:
Ijdpfxed Hmnfe Afwja
Material: Steel, stainless steel, and non-ferrous metals (motor speeds 700–1,900 rpm, infinitely variable)
Min. workpiece diameter: 5 mm
Max. workpiece diameter: 100 mm (150 mm)
Brush dimensions: 2 pieces Ø300 (250) x 50 mm or 3 pieces Ø300 (250) x 35 mm
Drive power: 3.0 kW
Connected load: 3.5 kW
Operating voltage: 3~, 400V, 50 Hz
Rated current: 8A
Pre-fuse: max 16A
Control voltage: 24V/DC
Width: approx. 500 mm + handwheel 74 mm, + suction nozzle 130 mm
Height: approx. 1,382 mm
Working height: approx. 1,080 mm
Depth: 1,209 mm
Weight: approx. 310 kg
Sound pressure level: at 700 rpm 64 dB(A), at 1,500 rpm 74 dB(A), during processing at maximum speed 82 dB(A)
Scope of delivery:
Rotary head deburring brush machine GratMaxx with power socket, without cable
Workpiece support table with adjustable angle stop and workpiece stops
Tool for brush replacement
No brushes included in delivery!
Accessories:
F50201 Circular brush, braided wire 0.38 mm
F50202 Circular brush, steel wire 0.2 mm
F50203 Circular brush, steel wire 0.38 mm
F50204 Circular brush, VA braided wire 0.38 mm
F50205 Circular brush, abrasive nylon U180
F50206 Circular brush, abrasive nylon U120
F50207 Circular brush, VA wire 0.20 mm
For further technical data, please refer to the attached PDF document.
mažas skelbimas
Ennepetal
1 181 km
Vibracinė apdailos mašina
GERD WOLFFVKUE 200
Skambinti
Gamybos metai: 2023, Sąlyga: naujas, IMMEDIATE AVAILABILITY!
Vibratory Finishing Machines with Separator
The machines of the VKUE series can be used for surface processing of both metallic and non-metallic workpieces.
These machines feature a large screening area, allowing for easy separation of workpieces from the grinding media.
Optional Accessories
- Pneumatic sound cover
- Pneumatic flap control
- Frequency control
- Dosing pump
Iedpfx Afon Smbrswsa
- Magnetic valve
- Basic control panel
- Rinse pipe (various types)
Images are for reference only. Optional accessories are available at an additional cost.
mažas skelbimas
Bad Wünnenberg
1 086 km
Vienpusio nušlifavimo mašina
EdgeRacerER 1500 E
Skambinti
Sąlyga: naudotas, Gamybos metai: 2016, veikimo valandos: 851 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MN25724, darbinis plotis: 1 500 mm, X ašies padavimo greitis: 4 m/min, įvesties srovės tipas: trifazis, maks. lakšto storis: 50 mm, bendras ilgis: 1 300 mm, bendras plotis: 2 600 mm, bendras aukštis: 2 500 mm, bendras svoris: 2 600 kg, darbinio aukščio: 950 mm, ruošinio aukštis (maks.): 50 mm, ruošinio plotis (maks.): 1 500 mm, The ER 1500 E is a top-side, single-sided deburring machine equipped with the EdgeRacer carousel for precise processing of interior and exterior contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers a high throughput rate of over 300 m²/h, gentle surface processing—even for polished, brushed, and foil-coated sheets—and reproducible results. Thanks to the roller conveyor of the EdgeRacer ER 1500 E, the grinding heads can also be adjusted below roller table level. The roller conveyor ensures maximum energy efficiency, with processing costs typically less than €0.01 per square meter of sheet metal processed. Thanks to the reversing operation, sheets to be processed can be inserted and removed from the infeed side. Acquire the EdgeRacer deburring machine ER 1500 E as a demonstration unit with only 851 operating hours directly from the manufacturer.
Iodpfx Aeucw Dzofwoa
Aukcionas
Aukcionas pasibaigęs
Bayern
1 152 km
Lakštinio metalo šalinimo mašina
Timesavers22-Serie-900-WW
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: G2372-13, darbinis plotis: 900 mm, darbinio aukščio: 1 190 mm, šlifavimo juostos ilgis: 1 900 mm, šlifavimo juostos plotis: 930 mm, The machine was only used a few times and has just 10 operating hours!
TECHNICAL DATA
Application area: precision grinding, material removal and calibration of workpieces
Working width: 900 mm
Abrasive belt dimensions: 930 × 1,900 mm
Table opening: 1 – 125 mm
Increased table opening: up to 250 mm
Constant working height: 1,190 mm
Speed and Feed
Aggregate speed: 11 and 22 m/s
Feed speed, frequency controlled: 4 – 11 m/min
MACHINE DETAILS
Machine weight: 2,100 kg
Grinding Equipment
Abrasive belt units: 2
Motor: two-speed motor
Contact roller height adjustment: hand wheel for correcting pressure or belt thickness
Height adjustment display: electronic digital display of feed table height in mm
Motor for contact roller unit: for finishing grinding
Ijdpfx Aswa Ubcefwea
Voltage: 400 V
Phases: 3
Frequency: 50 Hz
Total current: 62 A
Power: 31.68 kW
EQUIPMENT
- 2 abrasive belts
- Rubber-coated steel rollers
- Extraction system
mažas skelbimas
Setzingen
1 196 km
Šepetėlių šalinimo mašina
BoschertK 3
Skambinti
Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Boschert Brush Deburring Machine Model K3
for deburring straight sheet metal edges and with the lateral unit
suitable for cutouts and notches up to 70 mm depth as well as
outer radii on sheet metal.
3 motors, each 1.5 kW
Brush diameter: 300 mm
Material: wire brushes stainless steel/steel
Material thickness range: 0.8–8 mm
Machine dimensions:
Width: 1400 mm
Height: 580 mm
Depth: 670 mm
Base frame: 800 mm high (working height 920 mm)
Table support: 200 x 1400 mm
Hold-down device for sheet guidance
The sheet edge is deburred simultaneously from above and below as it passes through. For particularly heavy burrs, the motors can be synchronized so that both remove the heavy burr from above.
Iodpfx Afjtr Aviewoa
The third (lateral) unit is for deburring external contours and can be switched on separately.
A larger lateral table support is provided as storage.
mažas skelbimas
Regensburg
1 058 km
Lakštinio metalo šalinimo mašina
BMZBMZ M1
Skambinti
Sąlyga: naujas, Gamybos metai: 2023, bendras ilgis: 13 000 mm, bendras plotis: 8 000 mm, bendras aukštis: 17 000 mm, ruošinio svoris (maks.): 500 kg, bendras svoris: 600 kg, BMZ Manual Hand Deburring Machine BMZ M1
The BMZ-M1, thanks to its vacuum table, allows for easy manual deburring of multiple parts at the same time. The system can be equipped with two different brushes, and changing the brushes is very quick and easy. The brushes can be installed on the system simultaneously, and swapping between them is fast and simple. Since the brush is arranged parallel to the table, it enables more uniform grinding. The system’s motor weight is balanced, making it ergonomic for the operator. Achieve maximum quality at a minimal price with the BMZ M1.
Applications
Edge rounding
Deburring
Slag removal
Iodperp Dp Nsfx Afwoa
Oxide layer removal
Polishing
mažas skelbimas
Ahaus
1 166 km
Kraštų frezavimo staklės
Aceti61
Skambinti
Sąlyga: naujas, Aceti Edge Bevelling Machine Model 61
A stable, robust edge bevelling machine for milling visible and weld edges. Bevel adjustment via hand wheel and scale.
Table hardened, with a clamping length of 500 mm.
Axial adjustment of the milling table allows full utilisation of the ISO/DIN indexable inserts. Suitable for all materials, including plastics, through the use of various indexable inserts.
Standard accessories:
- Milling head fully equipped with 10 ISO indexable inserts
- Hardened, axially adjustable guides
- Bevel adjustment via hand wheel with locking facility
- Angle adjustment by means of circular guide 15–45°
- Table design with 4 rubber feet
Technical Data:
Motor: 400V, 1.1 kW
Speed: 2800 rpm
Milling table: 500 x 100 mm
Cutter: 80 mm
Isdpfsiwxwtex Afwea
Bevel: 0 – 6 mm
Angle: 15 – 45°
Weight: 35 kg
Incl. 10 pcs. indexable inserts SPUN 1203
mažas skelbimas
Ennepetal
1 181 km
Vibracinė apdailos mašina
GERD WOLFFVKUE 350
Skambinti
Gamybos metai: 2023, Sąlyga: naujas, IMMEDIATELY AVAILABLE!
Vibratory Finishing Machines with Separator
The VKUE series machines can be used for surface finishing of metallic and non-metallic workpieces.
Iodpfsn Smclsx Afwea
These machines feature a large screening area, allowing for easy separation of workpieces from grinding media.
Optional Accessories
- Pneumatic sound cover
- Pneumatic flap control
- Frequency control
- Dosing pump
- Magnetic valve
- Stand for control panel
- Rinsing pipe (various types)
Images are for reference only. Optional accessories are available at an additional cost.
mažas skelbimas
Bad Wünnenberg
1 086 km
Lakštinio metalo šalinimo mašina
EdgeRacerER 1500 D
Skambinti
Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 500 mm, X ašies padavimo greitis: 4 m/min, įvesties srovės tipas: trifazis, maks. lakšto storis: 102 mm, bendras ilgis: 2 300 mm, bendras plotis: 2 600 mm, bendras aukštis: 2 500 mm, bendras svoris: 4 000 kg, darbinio aukščio: 950 mm, ruošinio ilgis (maks.): 102 mm, Double-sided deburring in just one pass—naturally with 100% reproducible results and precise processing of both inner and outer edges—this is what only the EdgeRacer 1500 D offers you.
Iedpoucw Rbefx Afwja
The EdgeRacer 1500 D, which deburrs on both sides, is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with ribs, notches, threaded holes, and similar features. The maximum workpiece height is 102 mm. The brush units, operating from above and below, can be adjusted independently. Thanks to roller conveyor transport, the infeed can occur either below or above conveyor level.
Aukcionas
Aukcionas pasibaigęs
Bayern
1 152 km
Šepetėlių šalinimo mašina
FladderAUT-1000 VAC
Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1503, darbinis plotis: 1 000 mm, ruošinio plotis (maks.): 800 mm, ruošinio aukštis (maks.): 100 mm, ruošinio ilgis (maks.): 4 000 mm, TECHNICAL DETAILS
Working width: 1,000 mm
Brushes: Fladder grit 100
Maximum workpiece width: 800 mm
Maximum workpiece height: 100 mm
Maximum workpiece length: 4,000 mm
MACHINE DETAILS
Voltage: 3 × 400 V
Frequency: 50 Hz
Current: 50 A
Protection class: IP54
Ijdpfx Aowa T Saofwsa
EQUIPMENT
- Vacuum conveyor belt
- Vacuum pump
- Additional brush set, grit 100
mažas skelbimas
Dietzenbach
1 166 km
Metalo Gringing & kraštas apvalinimo mašinos
NS MaquinasDM 1100 Z2C
Skambinti
Sąlyga: naujas, DESCRIPTION
DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm.
The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step.
The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides.
A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film.
Technical Data - DM1100 Z2C:
Working capacity (Ø mm): 1100 x 100
Number of belt stations (Z): 1
Number of cross belt stations: 2
Abrasive belt dimensions (mm): 1100 x 2200
Abrasive belt speed (m/s): 8–22
Cross belt speed (m/s): 2–8
Feed speed (m/s): 0.6–3.2
Abrasive belt motor per head (kW): 18.5
Iodpfx Aod Ixadofwoa
Cross belt motor (kW) (2x): 3
Feed motor (kW) (3x): 0.18
Total power (kW): 33
Power consumption (A): 62
Extraction port per head (Ø mm): 150 + 185
Dimensions (mm): 3600 x 2330 x 2350
Weight (kg): 5000
mažas skelbimas
Regensburg
1 058 km
Lakštinio metalo šalinimo mašina
RWTSteelline 1300 RDDR
Skambinti
Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 300 mm, garantijos trukmė: 12 mėnesiai, ruošinio plotis (maks.): 1 300 mm, RWT Deburring Machine – Possible Configuration
Four-Station Machine:
1. Deburring with contact roller sanding belt
2. Cup brush for oxide layer or slag removal
3. Cup brush for edge rounding
4. Finish grinding with contact roller
The BSM series machines can be equipped with the following work units:
Sanding unit with sanding belt (R) – removes burrs protruding from the material surface, removes scale and corrosion from the surface
Planetary disc brush unit (D) – rounds edges, creates radii, and removes oxide layer on the sides after laser cutting
Rotary unit (A) with flap brushes – deburring and edge rounding without removing protective film, surface unification
Abrasive fleece brush unit (B) – cleans and polishes the surface material before further processing
These deburring machines are used for the following tasks:
Deburring parts after laser cutting – deburring edges, removing oxide, and surface finishing
Deburring parts after plasma cutting – slag removal, rust removal, removal of material overflows, edge rounding, and surface finishing
Deburring parts after punching – removal of sharp edges, edge rounding, and final surface finishing
Deburring parts after waterjet cutting – deburring and edge rounding, removing traces from waterjet cutting, and surface finishing
Deburring film-coated stainless steel parts – deburring and edge rounding without removing the protective film
Ijdsudal Depfx Afwea
Main advantages of the machine:
Modular system – we design the machine exactly to your needs
High-quality and even deburring of all product edges
Machining of very small workpieces with magnetic or vacuum table
Very simple operation via Schneider Electric touchscreen
Grinding, deburring, and finishing with one machine
Very fast tool changes and rigid machine frame
Given the wide variety of possible machine configurations, we recommend personal consultation and free grinding samples at our facility. This allows us to evaluate our customers’ requirements and then suggest the optimal machine configuration for your specific production needs.
mažas skelbimas
Ulft
1 211 km
Lissmac GS1000 pilnai suremontuotas
LissmacGS1000
Skambinti
Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: E07J 1021, darbinis plotis: 1 000 mm, plieno lakšto storis (maks.): 120 mm, bendras svoris: 3 790 kg, praėjimo plotis: 1 000 mm, galia: 45 kW (61,18 AG), įėjimo srovė: 98 A, Įranga: dokumentacija / vadovas, Ideal for construction companies seeking to combine efficiency with high-quality finishing
The LISSMAC XL1000 G2S2 is a powerful deburring machine, specifically suitable for construction companies working with sheet material. This fully refurbished machine (formerly known as the GS1000) deburrs and rounds both the top and bottom edges of the sheet in a single pass—ideal for steel construction, component manufacturing, and post-processing lines.
Advantages:
* Double-sided deburring and rounding in one pass
* Reduces manual rework and saves valuable time
Iodpfewaylgox Afwja
* Ensures safe, smoothly rounded edges and prevents coating chipping
* Fully mechanically and electrically overhauled
* Includes industrial extraction system
* Ready for immediate use with on-site installation and user training
Refurbishment Report:
A complete refurbishment report is available and can be supplied upon purchase.
Testing Possibilities:
The machine can be fully tested in operation at our facility. Visits by appointment only.
Price and Delivery:
€47,500,- EXW
Including extraction system
Including long infeed and outfeed conveyor
Excluding transport
Including installation and user training on-site (within the Netherlands)
This machine delivers maximum productivity and reliability for any construction environment. Contact us for more information or to arrange a demonstration at our facility.
mažas skelbimas
Gemmingen
1 215 km
Lakštinio metalo šalinimo mašina
NS MaquinasFC120 ZK
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, bendras ilgis: 1 450 mm, bendras plotis: 800 mm, bendras aukštis: 1 800 mm, bendras svoris: 500 kg, galia: 4,75 kW (6,46 AG), FC 120 ZK
Working capacity Ø 120x120 mm,
Number of belt stations (Z): 1,
Number of brush stations (K): 1,
Abrasive belt dimensions: 120x1850 mm,
Brush belt dimensions: 120xØ200 mm,
Abrasive belt speed: 20 m/s,
Brush belt speed: 15 m/s,
Feed speed: 12 m/min,
Abrasive belt motor per head (x1): 3 kW,
Brush motor per head (x1): 1.5 kW,
Feed motor: 0.25 kW,
Total power: 4.75 kW,
Iedpfjt D D Nzox Afwsa
Power consumption: 12A,
Dust extraction port per head Ø (2x): 80 mm,
Dimensions: 1450x800x1800 mm,
Weight: 500 kg
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

mažas skelbimas
Bad Wurzach
1 259 km
Lakštinio metalo šalinimo mašina
LissmacSBM-XL 1500 S2B2
Skambinti
Sąlyga: naudotas, Gamybos metai: 2019, veikimo valandos: 2 120 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SN026032, The machine was used in our own production facility, located in Bad Wurzach.
Equipment: Tooling | Tool Wear Compensation | Camera Set.
Offered as a package with 2 conveyor belts and a WDE 3002 wet extraction unit. Further information available upon request.
The SBM-XL S2B2 grinding and deburring machine is designed for simultaneous double-sided edge rounding and oxide layer removal on steel and stainless steel parts. The LISSMAC system is suitable for processing laser-cut parts.
Technical Data SBM-XL S2B2:
- Pass-through width: max. 1500 mm
- Processable sheet thickness: 0.5 - 50 mm
- Load capacity: 300 kg/m
- Voltage: 400 V / 50 Hz
Iodpfjt Tx Dxjx Afwoa
- Power system: 3~ PEN / 3~ PE+N
- Rated current: 74.3 A
- Rated power: 33 kW
- Protection class: IP 42
- Infinitely variable feed: 0 - 4 m/min
- Sheet thickness adjustment: electric
- Tool adjustment: electric
- Weight: approx. 4200 kg
- Dimensions (W/D/H): approx. 3600/2100/2000 mm
mažas skelbimas
Dietzenbach
1 166 km
Metalo Gringing & kraštas apvalinimo mašinos
NS MaquinasOD120 + OD160
Skambinti
Sąlyga: naujas, IMMEDIATE DELIVERY FROM STOCK! Subject to prior sale.
OD pipe deburring machines remove burrs from pipes after cutting.
This machine simultaneously removes both internal and external burrs from pipes and profiles without rotating the pipe material.
Ijdpfed Ixbzox Afwja
Round, square, rectangular, and various other pipe and profile shapes can be deburred in just a few seconds.
Thanks to the rotating brush, the operator does not need to turn the pipe.
The pipe clamping system allows precise insertion of the pipes and makes it easier for the operator to hold them during the deburring process.
The removed burrs are collected in a plastic container.
mažas skelbimas
Dietzenbach
1 166 km
Užglaistymo staklės / kraštų apvalinimo staklės
NS MaquinasDM 1100 2C
Skambinti
Sąlyga: naujas, DM1100 2C – Edge Rounding Machine for Laser, Flame-Cut, and Punched Parts.
NEW DESIGN – CAN BE VIEWED UNDER POWER – IMMEDIATELY AVAILABLE FROM STOCK
The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm in a SINGLE PASS.
The first station processes the workpieces from below using two counter-rotating cross belts, while the second station works from above, also with two counter-rotating cross belts. The cross belts allow deburring of both inner and outer edges of the workpieces.
Sharp edges produced during laser cutting, punching, or shearing of steel, stainless steel, and aluminum parts are removed.
Isdod Ev Upepfx Afwsa
Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs.
Another advantage of the DM1100 2C is its capability to process small parts from 50 mm. By folding up a table, the rotating direction of the upper conveyor automatically reverses, and the gap of the first processing station is bridged, enabling the workpieces to feed directly into the second processing station. Thus, small products measuring from 50 mm up to 150 mm can be processed on one side only.
An additional benefit of this machine is the ability to round parts with protective surface film without damaging the film.
Easy and tool-free cross belt change. The program for automatic positioning of the upper and lower belts ensures good accessibility and reduces changeover times.
User-friendly operation via integrated touch screen.
This machine is also available with a return transport system upon request.
Technical data:
Working capacity (Ø mm) 1100x50
Number of cross-belt stations 2
Cross-belt speed (m/s) 2–8
Feed speed (m/s) 0.6–3.2
Cross-belt motor (kW) (4x) 3
Feed motor (kW) (3x) 0.18
Total power (kW) 13.1
Power consumption (A) 30
Extraction connection per head (Ø mm) 150
Dimensions (mm) 2560x1980x2150
Weight (kg) 2210
mažas skelbimas
Dietzenbach
1 166 km
Metalo Gringing & kraštas apvalinimo mašinos
NS MaquinasDM 1100 C
Skambinti
Sąlyga: naujas, DM1100 C Edge Rounding Machine for Laser-, Flame- and Punched Parts
The DM1100 C performs edge rounding and simultaneously removes sharp burrs from both the inner and outer edges of steel, stainless steel, or aluminium parts after laser cutting, shearing, or punching.
The DM1100 C is equipped with double, counter-rotating cross belts with abrasive blocks to uniformly round all edges of the entire product.
A major benefit of this machine is the deburring of products with surface protection film, without damaging the film – only the edges are processed.
Excellent processing of parts in a wide range of sizes, from small parts starting at 50 x 50 mm up to 1100 mm.
Technical Data – DM1100 C:
Working capacity (Ø mm): 1100x50
Number of cross-belt stations: 2
Cross-belt speed (m/s): 8
Feed speed (m/s): 0.6–3.2
Cross-belt motor (kW): 3
Feed motor (kW): 0.18
Ijdpfxsd Evcwe Afwoa
Total power (kW): 6.2
Current consumption (A): 13
Extraction connection per head (Ø mm): 100
Dimensions (mm): 2270x1560x1940
Weight (kg): 1200
Mes supaprastiname jums paiešką
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota pjovimo griovelių mašinos (161)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo





























































































































































